ADC: The argument of vref=num is an integer. Values for num are:
SAMD21:
0 INT1V 1.0V voltage reference
1 INTVCC0 1/1.48 Analog voltage supply
2 INTVCC1 1/2 Analog voltage supply (only for VDDANA > 2.0V)
3 VREFA External reference
4 VREFB External reference
SAMD51:
0 INTREF internal bandgap reference
1 INTVCC1 Analog voltage supply
2 INTVCC0 1/2 Analog voltage supply (only for VDDANA > 2.0v)
3 AREFA External reference A
4 AREFB External reference B
5 AREFC External reference C (ADC1 only)
DAC: The argument of vref=num is an integer. Suitable values:
SAMD21:
0 INT1V Internal voltage reference
1 VDDANA Analog voltage supply
2 VREFA External reference
SAMD51:
0 INTREF Internal bandgap reference
1 VDDANA Analog voltage supply
2 VREFAU Unbuffered external voltage reference (not buffered in DAC)
4 VREFAB Buffered external voltage reference (buffered in DAC).
Changes in this commit:
- Do not deinit IRQ when uart.deinit() is called with an inactive object.
- Remove using it for the finaliser. There is another machanism for soft
reset, and it is not needed otherwise.
- Do not tag the UART buffers with MP_STATE_PORT, it is not required.
Clearing the DRE flag for the transmit interrupt at the end of a
uart.write() also cleared the RXC flag disabling the receive interrupt.
This commit also changes the flag set/clear mechanism in the driver for SPI
as well, even if it did not cause a problem there. But at least it saves a
few bytes of code.
Applies to both SPI and I2C. The underflow caused high baudrate settings
resulting in the lowest possible baudrate. The overflow resulted in
erratic baudrates, not just the lowest possible.
The datasheet on page 55 shows PF0 (SDA) and PF1 (SCL) are the pins for
I2C2, but these pins do not work. Checking the MBED pinout for the
NUCLEO-F429ZI shows:
I2C1: PB8 (SCL) and PB9 (SDA).
I2C2: PB10 (SCL) and PB11 (SDA).
Both of these work and can be scanned and find devices connected to them.
Signed-off-by: Dale Weber <hybotics.sd@gmail.com>.
This changes the signatures of QSPI write_cmd_data, write_cmd_addr_data and
read_cmd_qaddr_qdata so they return an error code. The softqspi and stm32
hardware qspi driver are updated to follow this new signature. Also the
spiflash driver is updated to use these new return values.
Signed-off-by: Damien George <damien@micropython.org>
The assertion that is added here (to gc.c) fails when running this new test
if ALLOC_TABLE_GAP_BYTE is set to 0.
Signed-off-by: Jeff Epler <jepler@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
Prior to this fix the follow crash occurred. With a GC layout of:
GC layout:
alloc table at 0x3fd80428, length 32001 bytes, 128004 blocks
finaliser table at 0x3fd88129, length 16001 bytes, 128008 blocks
pool at 0x3fd8bfc0, length 2048064 bytes, 128004 blocks
Block 128003 is an AT_HEAD and eventually is passed to gc_mark_subtree.
This causes gc_mark_subtree to call ATB_GET_KIND(128004). When block 1 is
created with a finaliser, the first byte of the finaliser table becomes
0x2, but ATB_GET_KIND(128004) reads these bits as AT_TAIL, and then
gc_mark_subtree references past the end of the heap, which happened to be
past the end of PSRAM on the esp32-s2.
The fix in this commit is to ensure there is a one-byte gap after the ATB
filled permanently with AT_FREE.
Fixes issue #7116.
See also https://github.com/adafruit/circuitpython/issues/5021
Signed-off-by: Jeff Epler <jepler@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
When you want to use the valgrind memory analysis tool on MicroPython, you
can arrange to define MICROPY_DEBUG_VALGRIND to enable use of special
valgrind macros. For now, this only fixes `gc_get_ptr` so that it never
emits the diagnostic "Conditional jump or move depends on uninitialised
value(s)".
Signed-off-by: Jeff Epler <jepler@gmail.com>
This change makes it so the compiler and persistent code loader take a
mp_compiled_module_t* as their last argument, instead of returning this
struct. This eliminates a duplicate context variable for all callers of
these functions (because the context is now stored in the
mp_compiled_module_t by the caller), and also eliminates any confusion
about which context to use after the mp_compile_to_raw_code or
mp_raw_code_load function returns (because there is now only one context,
that stored in mp_compiled_module_t.context).
Reduces code size by 16 bytes on ARM Cortex-based ports.
Signed-off-by: Damien George <damien@micropython.org>
This fixes the case for the code size comment action where there is no
matching artifact. Apparently, the result of the github-script action was
not treating `false` as a boolean value. To fix the problem we change the
result to use string. Also add some logging to make the step a bit less
cryptic.
Signed-off-by: David Lechner <david@pybricks.com>
These unimplemented features may never be implemented, and having the word
"yet" there takes up space.
Signed-off-by: Damien George <damien@micropython.org>
This module is useful, but it is not always needed. Disabling it saves
several kilobytes of build size, depending on other config options.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
The STM32H7xx HAL LPUART AF macros are missing the number, this HAL is the
only one that's inconsistent in the way it defines LPUART AF macros, so we
only need to define them for H7.
Prior to this commit, only sector 0 was erase/write protected, which may
not be enough to protect all of mboot (especially if mboot lives at a
higher address than the start of flash).
This commit makes sure all internal flash sectors that mboot lives in are
protected from erasing and writing. The linker script must define
_mboot_writable_flash_start for this to work.
Signed-off-by: Damien George <damien@micropython.org>
This changes the code size workflow to post a comment on pull requests with
the code size report. It also removes the error threshold so that the test
won't fail if code size increases.
Allowable code size changes are subjective, so shouldn't cause CI to fail.
In addition, failing CI tests can cause other hooks like code coverage
reports to be suppressed, so this fixes that problem as well.
Fixes issue #8464.
Signed-off-by: David Lechner <david@pybricks.com>
The code was already checking for duplicate kwargs for named parameters but
if `**kwargs` was given as a parameter, it did not check for multiples of
the same argument name.
This fixes the issue by adding an addition test to catch duplicates and
adds a test to exercise the code.
Fixes issue #10083.
Signed-off-by: David Lechner <david@pybricks.com>
All build artefacts are now placed in build*/ directories so there's no
longer any need to hide files like .o with .gitignore.
Signed-off-by: Damien George <damien@micropython.org>
On MacOS and Windows there are a few default serial devices that are
returned by `serial.tools.list_ports.comports()`. For example on MacOS:
```
{'description': 'n/a',
'device': '/dev/cu.Bluetooth-Incoming-Port',
'hwid': 'n/a',
'interface': None,
'location': None,
'manufacturer': None,
'name': 'cu.Bluetooth-Incoming-Port',
'pid': None,
'product': None,
'serial_number': None,
'vid': None}
{'description': 'n/a',
'device': '/dev/cu.wlan-debug',
'hwid': 'n/a',
'interface': None,
'location': None,
'manufacturer': None,
'name': 'cu.wlan-debug',
'pid': None,
'product': None,
'serial_number': None,
'vid': None}
```
Users of mpremote most likely do not want to connect to these ports. It
would be desirable if mpremote did not select this ports when using the
auto connect behavior. These serial ports do not have USB VID or PID
values and serial ports for Micropython boards with FTDI/serial-to-USB
adapter or native USB CDC/ACM support do.
Check for the presence of a USB VID / PID int value when selecting a
serial port to auto connect to. All serial ports will still be listed by
the `list` command and can still be selected by name when connecting.
Signed-off-by: Michael Mogenson <michael.mogenson@gmail.com>
This test could occasionally fail because some operations take longer
than expected. This relaxes the timing constraints and defers printing
until the very end.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
Now that the Timer class has been merged in a separate pull request,
this can be added to the module test too.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
Implements dictionary union according to PEP 584's specifications, minus
the fact that dictionary entries are not guaranteed to be in insertion
order. This feature is enabled with MICROPY_CPYTHON_COMPAT.
Includes a new test.
With the assistance of Fangrui Qin <qinf@purdue.edu>
Signed-off-by: Rayane Chatrieux <rayane.chatrieux@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
The original ESP32 only supports timer source clock APB so it doesn't need
and doesn't have a clk_src field.
The ESP32C3 supports timer source clock APB and XTAL so it does have a
clk_src field, and this needs to be configured to get the correct period.
Fixes#8084.
This shows how ports can add their own custom types/classes.
It is part of the unix coverage build, so we can use it for tests too.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
Follow up to 8a91c719 to no longer explicitly disable BLE in
mpconfigport.h.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
