This evolves the API from 2.x (and breaks it). Playback devices are now
separate from the samples themselves. This allows for greater playback
flexibility. Two sample sources are audioio.RawSample and audioio.WaveFile.
They can both be mono or stereo. They can be output to audioio.AudioOut or
audiobusio.I2SOut.
Internally, the dma tracking has changed from a TC counting block transfers
to an interrupt generated by the block event sent to the EVSYS. This reduces
the overhead of each DMA transfer so multiple can occure without using up TCs.
Fixes#652. Fixes#522. Huge progress on #263
This caused a fatal compiler diagnostic after #750. This compiler
flag is already specified in the atmel-samd builds, so it makes
sense to do it here for the same reasons.
these are function prototypes not used in circuitpython. The
declarations began to conflict with ones in the upstream SDK
at some point, so delete them.
Recent vendor SDKs ship libs with code in .text section, which previously
was going into .irom0.text. Adjust the linker script to route these
sections back to iROM (follows upstream change).
Commit efbf08266b moved _estack in order to ensure 8-byte alignment
of the stack, but the address of _bootloader_dbl_tap must remain
right at the end of SRAM.
I verified by reading the source that the 4-byte-aligned address is
used for all samd21 / samd51 boards in
adafruit/circuitpython@efbf08266b. However, I only tested on
trinket_m0.
Closes: #739
.. this allows developers who want to work with both micropython and
circuitpython to enable appveyor on their fork, but not get errors
when pushing circuitpython changes.
In the appveyor configuration for your fork, simply enable the
checkbox "Skip branches without appveyor.yml".
These allow accessing the filesystem label. For instance,
in boot.py, you can set the label on the built-in storage with:
storage.remount('/', False)
storage.getmount('/').label = "NEWLABEL"
storage.remount('/', True)
Users with multiple CIRCUITPY boards may find it desirable to
choose a different label for each board they own.
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
