Commit Graph

135 Commits

Author SHA1 Message Date
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Damien George 9e3e67b1d8 py/objgenerator: Fix unused variables when native gen extracts prelude.
Some compilers will warn about unused variables like scope_flags.  So use
MP_BC_PRELUDE_SIG_DECODE() which will silence these warnings.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-25 12:35:49 +11:00
Damien George f2040bfc7e py: Rework bytecode and .mpy file format to be mostly static data.
Background: .mpy files are precompiled .py files, built using mpy-cross,
that contain compiled bytecode functions (and can also contain machine
code). The benefit of using an .mpy file over a .py file is that they are
faster to import and take less memory when importing.  They are also
smaller on disk.

But the real benefit of .mpy files comes when they are frozen into the
firmware.  This is done by loading the .mpy file during compilation of the
firmware and turning it into a set of big C data structures (the job of
mpy-tool.py), which are then compiled and downloaded into the ROM of a
device.  These C data structures can be executed in-place, ie directly from
ROM.  This makes importing even faster because there is very little to do,
and also means such frozen modules take up much less RAM (because their
bytecode stays in ROM).

The downside of frozen code is that it requires recompiling and reflashing
the entire firmware.  This can be a big barrier to entry, slows down
development time, and makes it harder to do OTA updates of frozen code
(because the whole firmware must be updated).

This commit attempts to solve this problem by providing a solution that
sits between loading .mpy files into RAM and freezing them into the
firmware.  The .mpy file format has been reworked so that it consists of
data and bytecode which is mostly static and ready to run in-place.  If
these new .mpy files are located in flash/ROM which is memory addressable,
the .mpy file can be executed (mostly) in-place.

With this approach there is still a small amount of unpacking and linking
of the .mpy file that needs to be done when it's imported, but it's still
much better than loading an .mpy from disk into RAM (although not as good
as freezing .mpy files into the firmware).

The main trick to make static .mpy files is to adjust the bytecode so any
qstrs that it references now go through a lookup table to convert from
local qstr number in the module to global qstr number in the firmware.
That means the bytecode does not need linking/rewriting of qstrs when it's
loaded.  Instead only a small qstr table needs to be built (and put in RAM)
at import time.  This means the bytecode itself is static/constant and can
be used directly if it's in addressable memory.  Also the qstr string data
in the .mpy file, and some constant object data, can be used directly.
Note that the qstr table is global to the module (ie not per function).

In more detail, in the VM what used to be (schematically):

    qst = DECODE_QSTR_VALUE;

is now (schematically):

    idx = DECODE_QSTR_INDEX;
    qst = qstr_table[idx];

That allows the bytecode to be fixed at compile time and not need
relinking/rewriting of the qstr values.  Only qstr_table needs to be linked
when the .mpy is loaded.

Incidentally, this helps to reduce the size of bytecode because what used
to be 2-byte qstr values in the bytecode are now (mostly) 1-byte indices.
If the module uses the same qstr more than two times then the bytecode is
smaller than before.

The following changes are measured for this commit compared to the
previous (the baseline):
- average 7%-9% reduction in size of .mpy files
- frozen code size is reduced by about 5%-7%
- importing .py files uses about 5% less RAM in total
- importing .mpy files uses about 4% less RAM in total
- importing .py and .mpy files takes about the same time as before

The qstr indirection in the bytecode has only a small impact on VM
performance.  For stm32 on PYBv1.0 the performance change of this commit
is:

diff of scores (higher is better)
N=100 M=100             baseline -> this-commit  diff      diff% (error%)
bm_chaos.py               371.07 ->  357.39 :  -13.68 =  -3.687% (+/-0.02%)
bm_fannkuch.py             78.72 ->   77.49 :   -1.23 =  -1.563% (+/-0.01%)
bm_fft.py                2591.73 -> 2539.28 :  -52.45 =  -2.024% (+/-0.00%)
bm_float.py              6034.93 -> 5908.30 : -126.63 =  -2.098% (+/-0.01%)
bm_hexiom.py               48.96 ->   47.93 :   -1.03 =  -2.104% (+/-0.00%)
bm_nqueens.py            4510.63 -> 4459.94 :  -50.69 =  -1.124% (+/-0.00%)
bm_pidigits.py            650.28 ->  644.96 :   -5.32 =  -0.818% (+/-0.23%)
core_import_mpy_multi.py  564.77 ->  581.49 :  +16.72 =  +2.960% (+/-0.01%)
core_import_mpy_single.py  68.67 ->   67.16 :   -1.51 =  -2.199% (+/-0.01%)
core_qstr.py               64.16 ->   64.12 :   -0.04 =  -0.062% (+/-0.00%)
core_yield_from.py        362.58 ->  354.50 :   -8.08 =  -2.228% (+/-0.00%)
misc_aes.py               429.69 ->  405.59 :  -24.10 =  -5.609% (+/-0.01%)
misc_mandel.py           3485.13 -> 3416.51 :  -68.62 =  -1.969% (+/-0.00%)
misc_pystone.py          2496.53 -> 2405.56 :  -90.97 =  -3.644% (+/-0.01%)
misc_raytrace.py          381.47 ->  374.01 :   -7.46 =  -1.956% (+/-0.01%)
viper_call0.py            576.73 ->  572.49 :   -4.24 =  -0.735% (+/-0.04%)
viper_call1a.py           550.37 ->  546.21 :   -4.16 =  -0.756% (+/-0.09%)
viper_call1b.py           438.23 ->  435.68 :   -2.55 =  -0.582% (+/-0.06%)
viper_call1c.py           442.84 ->  440.04 :   -2.80 =  -0.632% (+/-0.08%)
viper_call2a.py           536.31 ->  532.35 :   -3.96 =  -0.738% (+/-0.06%)
viper_call2b.py           382.34 ->  377.07 :   -5.27 =  -1.378% (+/-0.03%)

And for unix on x64:

diff of scores (higher is better)
N=2000 M=2000        baseline -> this-commit     diff      diff% (error%)
bm_chaos.py          13594.20 ->  13073.84 :  -520.36 =  -3.828% (+/-5.44%)
bm_fannkuch.py          60.63 ->     59.58 :    -1.05 =  -1.732% (+/-3.01%)
bm_fft.py           112009.15 -> 111603.32 :  -405.83 =  -0.362% (+/-4.03%)
bm_float.py         246202.55 -> 247923.81 : +1721.26 =  +0.699% (+/-2.79%)
bm_hexiom.py           615.65 ->    617.21 :    +1.56 =  +0.253% (+/-1.64%)
bm_nqueens.py       215807.95 -> 215600.96 :  -206.99 =  -0.096% (+/-3.52%)
bm_pidigits.py        8246.74 ->   8422.82 :  +176.08 =  +2.135% (+/-3.64%)
misc_aes.py          16133.00 ->  16452.74 :  +319.74 =  +1.982% (+/-1.50%)
misc_mandel.py      128146.69 -> 130796.43 : +2649.74 =  +2.068% (+/-3.18%)
misc_pystone.py      83811.49 ->  83124.85 :  -686.64 =  -0.819% (+/-1.03%)
misc_raytrace.py     21688.02 ->  21385.10 :  -302.92 =  -1.397% (+/-3.20%)

The code size change is (firmware with a lot of frozen code benefits the
most):

       bare-arm:  +396 +0.697%
    minimal x86: +1595 +0.979% [incl +32(data)]
       unix x64: +2408 +0.470% [incl +800(data)]
    unix nanbox: +1396 +0.309% [incl -96(data)]
          stm32: -1256 -0.318% PYBV10
         cc3200:  +288 +0.157%
        esp8266:  -260 -0.037% GENERIC
          esp32:  -216 -0.014% GENERIC[incl -1072(data)]
            nrf:  +116 +0.067% pca10040
            rp2:  -664 -0.135% PICO
           samd:  +844 +0.607% ADAFRUIT_ITSYBITSY_M4_EXPRESS

As part of this change the .mpy file format version is bumped to version 6.
And mpy-tool.py has been improved to provide a good visualisation of the
contents of .mpy files.

In summary: this commit changes the bytecode to use qstr indirection, and
reworks the .mpy file format to be simpler and allow .mpy files to be
executed in-place.  Performance is not impacted too much.  Eventually it
will be possible to store such .mpy files in a linear, read-only, memory-
mappable filesystem so they can be executed from flash/ROM.  This will
essentially be able to replace frozen code for most applications.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-24 18:08:43 +11:00
Damien George bb00125aaa py: Support single argument to optimised MP_OBJ_STOP_ITERATION.
The MP_OBJ_STOP_ITERATION optimisation is a shortcut for creating a
StopIteration() exception object, and means that heap memory does not need
to be allocated for the exception (in cases where it can be used).  This
commit allows this optimised object to take an optional argument (before,
it could only have no argument).

The commit also adds some new tests to cover corner cases with
StopIteration and generators that previously did not work.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-15 00:12:41 +10:00
Damien George b8255dd2e0 py/vm: Simplify handling of MP_OBJ_STOP_ITERATION in yield-from opcode.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-15 00:12:41 +10:00
Damien George 332d83343f py: Rework mp_convert_member_lookup to properly handle built-ins.
This commit fixes lookups of class members to make it so that built-in
functions that are used as methods/functions of a class work correctly.

The mp_convert_member_lookup() function is pretty much completely changed
by this commit, but for the most part it's just reorganised and the
indenting changed.  The functional changes are:

- staticmethod and classmethod checks moved to later in the if-logic,
  because they are less common and so should be checked after the more
  common cases.

- The explicit mp_obj_is_type(member, &mp_type_type) check is removed
  because it's now subsumed by other, more general tests in this function.

- MP_TYPE_FLAG_BINDS_SELF and MP_TYPE_FLAG_BUILTIN_FUN type flags added to
  make the checks in this function much simpler (now they just test this
  bit in type->flags).

- An extra check is made for mp_obj_is_instance_type(type) to fix lookup of
  built-in functions.

Fixes #1326 and #6198.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-30 23:55:32 +10:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George 97eca38c4f py: Add mp_raise_type helper macro and use it where appropriate.
This provides a more consistent C-level API to raise exceptions, ie moving
away from nlr_raise towards mp_raise_XXX.  It also reduces code size by a
small amount on some ports.
2020-02-13 11:03:37 +11:00
Damien George edc7a8bf1d py/objgenerator: Use mp_obj_new_exception_arg1 to make StopIteration. 2020-01-23 13:37:25 +11:00
Jim Mussared 5578182ec9 py/objgenerator: Allow pend_throw to an unstarted generator.
Replace the is_running field with a tri-state variable to indicate
running/not-running/pending-exception.

Update tests to cover the various cases.

This allows cancellation in uasyncio even if the coroutine hasn't been
executed yet.  Fixes #5242
2019-11-04 15:51:16 +11:00
Jim Mussared 576ed89224 py/objgenerator: Remove globals from mp_obj_gen_instance_t.
This wasn't necessary as the wrapped function already has a reference to
its globals.  But it had a dual purpose of tracking whether the function
was currently running, so replace it with a bool.
2019-11-04 15:50:59 +11:00
Damien George 306ec5369a py/emitnative: Add support for archs that cannot read executable data.
In which case place the native function prelude in a bytes object, linked
from the const_table of that function.  An architecture should define
N_PRELUDE_AS_BYTES_OBJ to 1 before including py/emitnative.c to emit
correct machine code, then enable MICROPY_EMIT_NATIVE_PRELUDE_AS_BYTES_OBJ
so the runtime can correctly handle the prelude being in a bytes object.
2019-10-05 13:42:39 +10:00
Damien George b5ebfadbd6 py: Compress first part of bytecode prelude.
The start of the bytecode prelude contains 6 numbers telling the amount of
stack needed for the Python values and exceptions, and the signature of the
function.  Prior to this patch these numbers were all encoded one after the
other (2x variable unsigned integers, then 4x bytes), but using so many
bytes is unnecessary.

An entropy analysis of around 150,000 bytecode functions from the CPython
standard library showed that the optimal Shannon coding would need about
7.1 bits on average to encode these 6 numbers, compared to the existing 48
bits.

This patch attempts to get close to this optimal value by packing the 6
numbers into a single, varible-length unsigned integer via bit-wise
interleaving.  The interleaving scheme is chosen to minimise the average
number of bytes needed, and at the same time keep the scheme simple enough
so it can be implemented without too much overhead in code size or speed.
The scheme requires about 10.5 bits on average to store the 6 numbers.

As a result most functions which originally took 6 bytes to encode these 6
numbers now need only 1 byte (in 80% of cases).
2019-10-01 12:26:22 +10:00
Damien George 81d04a0200 py: Add n_state to mp_code_state_t struct.
This value is used often enough that it is better to cache it instead of
decode it each time.
2019-10-01 12:26:22 +10:00
Damien George 4c5e1a0368 py/bc: Change mp_code_state_t.exc_sp to exc_sp_idx.
Change from a pointer to an index, to make space in mp_code_state_t.
2019-10-01 12:26:22 +10:00
Damien George 973c87d8fa py/objgenerator: Move defn of mp_const_GeneratorExit_obj here.
Because the mp_obj_exception_t type is now globally available.
2019-08-22 16:05:05 +10:00
Laurens Valk a73859d5af py/objgenerator: Add missing #if guard for PY_GENERATOR_PEND_THROW.
Without it, gen_instance_pend_throw_obj is defined but not used when
MICROPY_PY_GENERATOR_PEND_THROW is set to 0.
2019-07-09 13:24:23 +10:00
Damien George 4268d0e1ac py/objgenerator: Remove unneeded forward decl and clean up white space. 2019-05-09 13:49:07 +10:00
Damien George dac9d47671 py/objgenerator: Fix handling of None passed as 2nd arg to throw().
Fixes issue #4527.
2019-05-09 13:40:28 +10:00
Damien George eee1e8841a py: Downcase all MP_OBJ_IS_xxx macros to make a more consistent C API.
These macros could in principle be (inline) functions so it makes sense to
have them lower case, to match the other C API functions.

The remaining macros that are upper case are:
- MP_OBJ_TO_PTR, MP_OBJ_FROM_PTR
- MP_OBJ_NEW_SMALL_INT, MP_OBJ_SMALL_INT_VALUE
- MP_OBJ_NEW_QSTR, MP_OBJ_QSTR_VALUE
- MP_OBJ_FUN_MAKE_SIG
- MP_DECLARE_CONST_xxx
- MP_DEFINE_CONST_xxx

These must remain macros because they are used when defining const data (at
least, MP_OBJ_NEW_SMALL_INT is so it makes sense to have
MP_OBJ_SMALL_INT_VALUE also a macro).

For those macros that have been made lower case, compatibility macros are
provided for the old names so that users do not need to change their code
immediately.
2019-02-12 14:54:51 +11:00
Damien George cc2bd63c57 py/emitnative: Implement yield and yield-from in native emitter.
This commit adds first class support for yield and yield-from in the native
emitter, including send and throw support, and yields enclosed in exception
handlers (which requires pulling down the NLR stack before yielding, then
rebuilding it when resuming).

This has been fully tested and is working on unix x86 and x86-64, and
stm32.  Also basic tests have been done with the esp8266 port.  Performance
of existing native code is unchanged.
2018-10-01 13:31:11 +10:00
Damien George d95947b48a py/vm: When VM raises exception put exc obj at beginning of func state.
Instead of at end of state, n_state - 1.  It was originally (way back in
v1.0) put at the end of the state because the VM didn't have a pointer to
the start.  But now that the VM takes a mp_code_state_t pointer it does
have a pointer to the start of the state so can put the exception object
there.

This commit saves about 30 bytes of code on all architectures, and, more
importantly, reduces C-stack usage by a couple of words (8 bytes on Thumb2
and 16 bytes on x86-64) for every (non-generator) call of a bytecode
function because fun_bc_call no longer needs to remember the n_state
variable.
2018-09-29 23:25:08 +10:00
Damien George fc1bb51af5 py/objgenerator: Remove TODO about returning gen being called again.
The code implements correct behaviour, as tested by the new test case added
in this commit.
2018-09-27 15:18:24 +10:00
Damien George 3f6ffe059f py/objgenerator: Implement PEP479, StopIteration convs to RuntimeError.
This commit implements PEP479 which disallows raising StopIteration inside
a generator to signal that it should be finished.  Instead, the generator
should simply return when it is complete.

See https://www.python.org/dev/peps/pep-0479/ for details.
2018-09-20 15:36:59 +10:00
Damien George e2e22e3d7e py/objgenerator: Implement __name__ with normal fun attr accessor code.
With the recent change b488a4a848, a
generating function now has the same layout in memory as a normal bytecode
function, and so can reuse the latter's attribute accessor code to
implement __name__.
2018-07-10 16:33:57 +10:00
Damien George b488a4a848 py/objgenerator: Eliminate need for mp_obj_gen_wrap wrapper instances.
For generating functions there is no need to wrap the bytecode function in
a generator wrapper instance.  Instead the type of the bytecode function
can be changed to mp_type_gen_wrap.  This reduces code size and saves a
block of GC heap RAM for each generator.
2018-07-02 15:30:57 +10:00
Damien George 400273a799 py/objgenerator: Protect against reentering a generator.
Generators that are already executing cannot be reexecuted.  This patch
puts in a check for such a case.

Thanks to @jepler for finding the bug.
2018-05-22 16:54:03 +10:00
Damien George 771cb359af py/objgenerator: Save state in old_globals instead of local variable.
The code_state.old_globals variable is there to save the globals state so
should be used for this purpose, to avoid the need for additional local
variables on the C stack.
2018-05-22 16:39:19 +10:00
Jeff Epler cbf981f330 py/objgenerator: Check stack before resuming a generator.
This turns a hard crash in a recursive generator into a 'maximum recursion
depth exceeded' exception.
2018-04-10 14:06:26 +10:00
Paul Sokolovsky 6364401666 py/objgenerator: Allow to pend an exception for next execution.
This implements .pend_throw(exc) method, which sets up an exception to be
triggered on the next call to generator's .__next__() or .send() method.
This is unlike .throw(), which immediately starts to execute the generator
to process the exception. This effectively adds Future-like capabilities
to generator protocol (exception will be raised in the future).

The need for such a method arised to implement uasyncio wait_for() function
efficiently (its behavior is clearly "Future" like, and normally would
require to introduce an expensive Future wrapper around all native
couroutines, like upstream asyncio does).

py/objgenerator: pend_throw: Return previous pended value.

This effectively allows to store an additional value (not necessary an
exception) in a coroutine while it's not being executed. uasyncio has
exactly this usecase: to mark a coro waiting in I/O queue (and thus
not executed in the normal scheduling queue), for the purpose of
implementing wait_for() function (cancellation of such waiting coro
by a timeout).
2017-12-15 20:20:36 +02:00
Damien George 64f11470be py/objgenerator: Remove unreachable code for STOP_ITERATION case.
This commit essentially reverts aa9dbb1b03
where this if-condition was added.  It seems that even when that commit
was made the code was never reached by any tests, nor reachable by
analysis (see below).  The same is true with the code as it currently
stands: no test triggers this if-condition, nor any uasyncio examples.
Analysing the flow of the program also shows that it's not reachable:

==START==
-> to trigger this if condition mp_execute_bytecode() must return
   MP_VM_RETURN_YIELD with *sp==MP_OBJ_STOP_ITERATION

   -> mp_execute_bytecode() can only return MP_VM_RETURN_YIELD from the
      MP_BC_YIELD_VALUE bytecode, which can happen in 2 ways:

      -> 1) from a "yield <x>" in bytecode, but <x> must always be a proper
         object, never MP_OBJ_STOP_ITERATION; ==END1==

      -> 2) via yield from, via mp_resume() which must return
         MP_VM_RETURN_YIELD with ret_value==MP_OBJ_STOP_ITERATION, which
         can happen in 3 ways:

         -> 1) it delegates to mp_obj_gen_resume(); go back to ==START==

         -> 2) it returns MP_VM_RETURN_YIELD directly but with a guard that
            ret_val!=MP_OBJ_STOP_ITERATION; ==END2==

         -> 3) it returns MP_VM_RETURN_YIELD with ret_val set from
            mp_call_method_n_kw(), but mp_call_method_n_kw() must return a
            proper object, never MP_OBJ_STOP_ITERATION; ==END3==

The above shows there is no way to trigger the if-condition and it can be
removed.
2017-11-30 12:06:41 +11:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George f69ab79ec8 py/objgenerator: Allow to hash generators and generator instances.
Adds nothing to the code size, since it uses existing empty slots in the
type structures.
2017-07-07 11:47:38 +10:00
Damien George a8a5d1e8c8 py: Provide mp_decode_uint_skip() to help reduce stack usage.
Taking the address of a local variable leads to increased stack usage, so
the mp_decode_uint_skip() function is added to reduce the need for taking
addresses.  The changes in this patch reduce stack usage of a Python call
by 8 bytes on ARM Thumb, by 16 bytes on non-windowing Xtensa archs, and by
16 bytes on x86-64.  Code size is also slightly reduced on most archs by
around 32 bytes.
2017-06-09 13:36:33 +10:00
Damien George 94c41bb06f py: Use mp_raise_TypeError/mp_raise_ValueError helpers where possible.
Saves 168 bytes on bare-arm.
2017-03-28 22:37:26 +11:00
Damien George 5640e6dacd py: Provide mp_decode_uint_value to help optimise stack usage.
This has a noticeable improvement on x86-64 and Thumb2 archs, where stack
usage is reduced by 2 machine words in the VM.
2017-03-17 16:50:19 +11:00
Damien George 71a3d6ec3b py: Reduce size of mp_code_state_t structure.
Instead of caching data that is constant (code_info, const_table and
n_state), store just a pointer to the underlying function object from which
this data can be derived.

This helps reduce stack usage for the case when the mp_code_state_t
structure is stored on the stack, as well as heap usage when it's stored
on the heap.

The downside is that the VM becomes a little more complex because it now
needs to derive the data from the underlying function object.  But this
doesn't impact the performance by much (if at all) because most of the
decoding of data is done outside the main opcode loop.  Measurements using
pystone show that little to no performance is lost.

This patch also fixes a nasty bug whereby the bytecode can be reclaimed by
the GC during execution.  With this patch there is always a pointer to the
function object held by the VM during execution, since it's stored in the
mp_code_state_t structure.
2017-03-17 16:39:13 +11:00
Damien George ae8d867586 py: Add iter_buf to getiter type method.
Allows to iterate over the following without allocating on the heap:
- tuple
- list
- string, bytes
- bytearray, array
- dict (not dict.keys, dict.values, dict.items)
- set, frozenset

Allows to call the following without heap memory:
- all, any, min, max, sum

TODO: still need to allocate stack memory in bytecode for iter_buf.
2017-02-16 18:38:06 +11:00
Damien George 239f920299 py/objgenerator: Don't raise RuntimeError if GeneratorExit ignored.
In this case it's allowed to be ignored.
2017-01-17 00:16:56 +11:00
Damien George 681994638b py/objgenerator: When throwing an object, don't make an exc instance.
Arguments to throw() for generators don't need to be exceptions.
2017-01-17 00:14:14 +11:00
Damien George 7d0d7215d2 py: Use mp_raise_msg helper function where appropriate.
Saves the following number of bytes of code space: 176 for bare-arm, 352
for minimal, 272 for unix x86-64, 140 for stmhal, 120 for esp8266.
2016-10-17 12:17:37 +11:00
Damien George 581a59a456 py: Rename struct mp_code_state to mp_code_state_t.
Also at _t to mp_exc_stack pre-declaration in struct typedef.
2016-08-27 23:21:00 +10:00
Paul Sokolovsky c4a8004933 py: Get rid of assert() in method argument checking functions.
Checks for number of args removes where guaranteed by function descriptor,
self checking is replaced with mp_check_self(). In few cases, exception
is raised instead of assert.
2016-08-12 22:39:03 +03:00
Paul Sokolovsky eff85bb1dc py/vm: "yield from" didn't handle MP_OBJ_STOP_ITERATION optimization.
E.g. crashed when yielding from already stopped generators.
2016-04-28 02:08:43 +03:00
Damien George 4b72b3a133 py: Change type signature of builtin funs that take variable or kw args.
With this patch the n_args parameter is changed type from mp_uint_t to
size_t.
2016-01-11 00:49:27 +00:00
Damien George a0c97814df py: Change type of .make_new and .call args: mp_uint_t becomes size_t.
This patch changes the type signature of .make_new and .call object method
slots to use size_t for n_args and n_kw (was mp_uint_t.  Makes code more
efficient when mp_uint_t is larger than a machine word.  Doesn't affect
ports when size_t and mp_uint_t have the same size.
2016-01-11 00:48:41 +00:00
Damien George 999cedb90f py: Wrap all obj-ptr conversions in MP_OBJ_TO_PTR/MP_OBJ_FROM_PTR.
This allows the mp_obj_t type to be configured to something other than a
pointer-sized primitive type.

This patch also includes additional changes to allow the code to compile
when sizeof(mp_uint_t) != sizeof(void*), such as using size_t instead of
mp_uint_t, and various casts.
2015-11-29 14:25:35 +00:00
Damien George cbf7674025 py: Add MP_ROM_* macros and mp_rom_* types and use them. 2015-11-29 14:25:04 +00:00