73c9f85b4c
cc3200: Simplify the Timer API and correct the documents.
...
Make the PWM duty cycle configurable from 0.00 to 100.00 by
accepting values from 0 to 10000.
Add automatic Pin assignment when operating in PWM mode.
2016-02-21 21:53:16 +01:00
056cb288d9
cc3200: Remove includes of rom.h (must be included via rom_map.h).
2015-11-01 23:33:12 +01:00
731f359292
all: Add py/mphal.h and use it in all ports.
...
py/mphal.h contains declarations for generic mp_hal_XXX functions, such
as stdio and delay/ticks, which ports should provide definitions for. A
port will also provide mphalport.h with further HAL declarations.
2015-10-31 19:14:30 +03:00
9b12bc788f
cc3200: Switch from HAL_GetTick() to mp_hal_ticks_ms().
2015-10-29 20:43:11 +03:00
d8137178bb
cc3200: Create wipy module, remove HeartBeat class.
...
The heartbeat is now controllable via a single function within the
wipy module.
2015-10-19 21:17:15 +02:00
c69642a460
cc3200: Increase error led blynk period to 100ms
2015-09-16 10:10:17 +02:00
e3f8777ee8
cc3200: Implement new Pin API.
2015-09-10 07:59:03 +02:00
aa8e8acb7d
cc3200: Change HeartBeat period from 5 to 4 seconds.
2015-08-16 20:18:09 +02:00
2673374d18
cc3200: Refactor PRCM special user bits implementation.
2015-08-09 22:15:18 +02:00
f960d753e4
cc3200: Fix bootloader build error.
2015-06-10 23:35:36 +02:00
6148f8b7d2
cc3200: Add contructor to the HeartBeat class.
2015-06-10 23:35:28 +02:00
a3acaa000c
cc3200: Add antenna selection feature to WLAN.
2015-06-07 00:06:27 +02:00
90d7c4ef3d
cc3200: Make HeartBeat.disable() thread safe.
2015-05-25 21:14:31 +02:00
259eaab9a9
cc3200: Clean up and reduce use/include of std.h.
2015-04-18 14:29:28 +01:00
26d230419c
cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.
...
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
2015-03-25 15:22:32 +01:00
2c103d5200
cc3200: Rewrite the PRCM RTC functionality methods.
...
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
2015-03-14 10:08:47 +01:00
09721e2314
cc3200: Increase heartbeat period from 3 to 5 seconds.
2015-03-14 10:08:44 +01:00
9e44383e3f
cc3200: Add power management framework. Add mpcallback class.
...
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
0475de1350
cc3200: Make WDT and HeartBeat constant objects on their own right.
2015-03-11 16:54:05 +01:00
d01060241a
cc3200: Add heartbeat signal on system led.
2015-02-28 19:03:21 +01:00
7a074a14ce
cc3200: Implement safe boot pin and system led behaviour.
...
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
0b32e50365
stmhal: Make pybstdio usable by other ports, and use it.
...
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
8785645a95
cc3200: Add cc3200 port of MicroPython.
...
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00
danicampora
Damien George
Paul Sokolovsky
danicampora