5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
ee7a701487
Switch to start_advertising arg
2021-05-19 12:21:48 -07:00
806b39fb22
Update Adapter.c
...
Added support for setting transmitter power
2021-05-19 11:55:01 -07:00
7dee378ade
Update Adapter.h
...
Added support for setting transmitter power
2021-05-19 11:55:01 -07:00
633d83cc3e
Merge remote-tracking branch 'upstream/main' into sleep-revamp
2021-05-17 18:57:10 -04:00
9752162508
Merge pull request #4765 from dhalbert/rotary-trinkey-rev-c-pins
...
Update various Trinkey pins and add _pixelbuf
2021-05-15 11:52:33 -04:00
1e2a945782
Make busio.SPI be NotImplementedError on proxlight to save space
2021-05-14 21:52:54 -04:00
689ec86225
Merge pull request #4754 from dhalbert/fix-endpoint-checking
...
Fix endpoint checking; Clean up safe mode printing
2021-05-14 11:25:01 -07:00
3e5ec403fb
time.localtime: low timestamps are ok if epoch is 2000
2021-05-14 12:20:49 +02:00
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
295103bb31
Merge remote-tracking branch 'upstream/main' into sleep-revamp
2021-05-13 16:22:12 -04:00
35ee4add63
Merge pull request #4388 from hierophect/stm-alarm
...
STM32: Alarms and sleep
2021-05-13 10:27:51 -07:00
0d3c5222d8
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-05-10 17:30:33 -04:00
106429a5e6
Update __init__.c
...
Minor typo.
2021-05-10 21:13:05 +01:00
5e06c91244
Merge pull request #4716 from tyomitch/main
...
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
446169e078
Merge pull request #4720 from tannewt/merge_1.13
...
Merge in MicroPython 1.13
2021-05-08 08:46:03 -05:00
5c736835de
Fix esp32s2 builds after AP changes
2021-05-07 10:03:02 -07:00
c6b9885573
Merge pull request #4721 from dhalbert/update-xtensa-cache-id
...
update github actions xtensa cache id; fix a typo
2021-05-06 16:48:20 -04:00
0773e355a7
update github actions xtensa cache id; fix a typo
2021-05-06 15:10:45 -04:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
ebf9dcb47a
Merge pull request #4689 from dhalbert/dynamic-usb-descriptors
...
Dynamic USB descriptors
2021-05-06 13:51:38 -04:00
71d2536725
Build fixes thanks to jepler
2021-05-06 09:04:56 -07:00
908d83d1f2
s/Circuit Python/CircuitPython/g
...
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod
2021-05-05 17:51:52 -07:00
8f9c9dd45f
doc error
2021-05-05 13:41:44 -04:00
fc8e1c4c2e
address review comments
2021-05-05 12:35:12 -04:00
30c7aa8fc9
Merge pull request #4650 from anecdata/ap
...
wifi.radio Access Point modes
2021-05-05 08:47:55 -07:00
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
adc3d7d55e
update Python API according to review comments
2021-05-03 22:29:02 -04:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
5b5de4b92e
fix sHID report doc and API
2021-05-03 20:53:31 -04:00
cae31d6762
remove PWMOut from pulseio
2021-05-01 09:31:11 -04:00
eebcd2eeaf
remove unsupported authmodes
2021-04-30 22:11:32 +05:30
6640db9555
make authmode settable
2021-04-30 21:35:02 +05:30
be7b2b00a8
uncrustify with newer version of uncrustify
2021-04-30 10:40:12 -04:00
cc95b71d64
fix type annotations
2021-04-30 09:40:40 -04:00
7c845818b3
Merge branch 'main' into ap
2021-04-30 17:11:22 +05:30
b8b20faa20
doc fixes
2021-04-29 23:51:39 -04:00
5ef9b10669
Merge pull request #4685 from microDev1/authmode
...
Add AuthMode class
2021-04-29 22:12:58 -05:00
71a8cadb09
working!
2021-04-29 22:26:38 -04:00
52589691b8
Merge pull request #4651 from lesamouraipourpre/minor-docs-fixes
...
Minor docs fixes in displayio.Bitmap
2021-04-29 08:12:47 -05:00
1b972c51c3
add authmode class
2021-04-29 18:42:36 +05:30
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
9feef41c82
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-04-28 15:10:55 -04:00
587aedd14f
rework storage allocation
2021-04-28 13:00:44 -04:00
d4d96bb25f
Merge pull request #4236 from jun2sak/nrf52-sleep
...
sleep and wakeup for nrf52
2021-04-28 12:11:31 -04:00
f98a54628b
wip: compiles
2021-04-27 14:37:36 -04:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
7a40b4daec
very much WIP
2021-04-26 23:54:01 -04:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
a1e2afadce
AP ip_info, gateway, & subnet
2021-04-26 00:22:51 -05:00
c26e49c2e6
wip: starting to try to compile
2021-04-25 23:17:41 -04:00
f20a53177b
add authmode to start_ap()
2021-04-25 18:20:18 -05:00
6f6c0cff81
embellish rtd comments. channel _should_ default to 1 behind the scenes since 0 is out of range, but just to be sure, default channel to 1
2021-04-25 14:30:45 -05:00
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
aea3c4d3ab
wip
2021-04-25 10:23:59 -04:00
7accb8b173
modify copyright notice.
2021-04-25 19:57:21 +09:00
dc3c47d396
ap channel param
2021-04-25 00:22:08 -05:00
de01814cce
call start and stop (oops)
2021-04-24 20:38:04 -05:00
354b442867
fixes
2021-04-24 19:36:11 -05:00
2e52c0ae62
set all wifi modes; add sta start & sta/ap stop
2021-04-24 16:41:41 -05:00
2ba2574ebf
Merge pull request #4619 from tyomitch/microbit
...
[build] Allow USB to be set to 0
2021-04-24 10:31:29 -04:00
4d267ef644
add get_ipv4_address_ap
2021-04-23 21:44:34 -05:00
556a126917
wip: getting closer
2021-04-23 21:44:13 -04:00
80e8b4ac14
Merge pull request #4635 from jepler/pcc
...
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-23 13:31:53 -07:00
8565a9ab90
shared-bindings: Fix type of Colorspace values in docs
2021-04-23 12:39:37 -05:00
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
05a81a066e
displayio: Improve docs about Colorspaces
2021-04-23 09:57:24 -05:00
0be610fd2b
Changes as requested for Bitmap docs.
2021-04-23 14:41:47 +01:00
07059dd373
Minor docs fixes in displayio.Bitmap
2021-04-23 12:56:44 +01:00
9da8978d40
more of the same
2021-04-22 23:41:57 -05:00
632cebafc6
fix comment (stub fail)
2021-04-22 23:33:33 -05:00
2b4c88d633
wip: partial HID, still needs rework
2021-04-23 00:18:05 -04:00
3544d4e221
.start_ap() & .mac_address_ap
2021-04-22 22:57:07 -05:00
01979acd48
Merge pull request #4604 from tannewt/buffer_size
...
Assume max characteristic size when the client
2021-04-20 12:02:06 -04:00
99799cded6
imagecapture: implement to review suggestions
2021-04-20 10:21:32 -05:00
76d68f21ac
displayio: Add RGB555/565/_SWAPPED format support
...
This is helpful when displaying frames from an OV7670 camera, which
uses the RGB565_SWAPPED format internally.
2021-04-19 10:23:47 -05:00
fc4538f845
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-16 17:18:59 -05:00
81e11ae063
Fix type
2021-04-16 11:30:10 -07:00
e0024c70de
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-04-15 16:32:30 -04:00
7eeea869ac
Fix light sleep global alarms, API revisions
2021-04-15 15:02:42 -04:00
827f67813f
add a filter text field to the support matrix
2021-04-15 19:05:50 +02:00
6cb751ab06
wip: revamp API names
2021-04-14 22:10:09 -04:00
aa28d4f315
Allow setting max_packet_size for PacketBuffer
...
This is handy for remote characteristics because it allows for
the PacketBuffer binding code to have the correct max size. This
PR also adds checks so we don't write outside the outgoing buffer.
2021-04-14 17:09:48 -07:00
4a7e129287
wip: latent usb device enabling/disabling
2021-04-13 23:33:44 -04:00
c6ee471b52
Merge branch 'main' of https://github.com/adafruit/circuitpython into patch-3
2021-04-13 00:32:19 -04:00
15764b4c24
Merge remote-tracking branch 'upstream/main' into nrf52-sleep
2021-04-09 13:48:45 -04:00
72055ff02b
Merge pull request #4578 from tannewt/packetbuffer_lengths
...
Improve PacketBuffer lengths and remove packet_size
2021-04-08 18:55:24 -04:00
5ec195b5ef
Remove PacketBuffer.packet_size
...
Fixes #2853
2021-04-08 13:29:26 -07:00
82479b6a2c
Merge pull request #4503 from hierophect/sleep-api-update
...
Sleep API changes and fix for main.c silent issue
2021-04-06 16:53:25 -04:00
8958c1e227
Minor documentation fixes in displayio
2021-04-06 10:47:46 +01:00
bf58afdb2a
Merge pull request #4399 from tyomitch/patch-2
...
[stm] implementation of audiopwmio
2021-04-05 18:35:39 -04:00
78089107bc
displayio.Bitmap: Allow modification though the buffer protocol
...
It is required to call .dirty() with appropriate arguments after modifications through the buffer protocol, or the display might not be updated correctly.
2021-04-03 10:41:20 -05:00
3f158450f9
can't xref this right now
2021-04-02 13:09:23 -05:00
5a56df989f
can't xref this right now
2021-04-02 13:09:23 -05:00
758dc81fcb
displayio: ulab.frombuffer -> ulab.numpy.frombuffer
2021-04-02 13:09:23 -05:00
b1dfd64fdc
stubs: ulab.array -> ulab.ndarray
2021-04-02 13:09:23 -05:00
17585e1e07
Clean up API
2021-04-02 14:08:48 -04:00
65759622ea
Add a missing parameter to an error message ( Fixes #4505 )
2021-03-29 23:03:14 +01:00
b274a0497b
Merge pull request #4501 from jepler/rgbmatrix-memoryview
...
RGBMatrix: fix memoryview(matrix)
2021-03-29 16:07:22 -04:00
d35a307ffa
Merge branch 'sleep-api-update' into stm-alarm
2021-03-29 12:27:25 -04:00
00178ca5e0
Sleep API changes, redundancy fix
2021-03-27 14:14:57 -04:00
529fb52309
Style changes and wakeup detection
2021-03-27 13:16:12 -04:00
b04f9130c7
RGBMatrix: fix memoryview(matrix)
...
Typical test:
```python
import displayio
import rgbmatrix
import board
displayio.release_displays()
matrix = rgbmatrix.RGBMatrix(
width=128, bit_depth=4,
rgb_pins=[board.GP0, board.GP1, board.GP2, board.GP3, board.GP4, board.GP5],
addr_pins=[board.GP6, board.GP7, board.GP8, board.GP9],
clock_pin=board.GP10, latch_pin=board.GP11, output_enable_pin=board.GP12)
mem = memoryview(matrix)
mem[0] = 65535 # OK
mem[0] = 65536 # errors (out of range)
```
2021-03-27 12:04:27 -05:00
583fc76cf5
run uncrustify
2021-03-26 15:38:20 -05:00
8056af8648
[synthio] add a simple MidiTrack implementation
2021-03-26 16:38:10 -04:00
a70b679ed5
bitbangio.SPI.read: Support write_value, fix some other nits
2021-03-26 12:24:09 -05:00
b40d072648
[stm] implementation of audiopwmio
...
Based on nrf PWMAudioOut by @jepler and stm PulseOut by @hierophect
Tested on a Meowbit
2021-03-26 13:18:01 -04:00
1512ca520b
Fix PWMOut non-error handling and never reset
2021-03-19 09:57:21 -04:00
b2d913412f
merge from upstream
2021-03-18 23:14:43 -04:00
d0125617fd
Merge pull request #4428 from kmatch98/bitmap-read-2
...
Add `reverse_rows` to speedy bitmaptools.readinto function
2021-03-18 18:41:35 -05:00
623ece2c73
Merge pull request #4429 from jepler/displayio-bitmap-memoryview
...
displayio.Bitmap: Make memoryview()able
2021-03-18 18:38:25 -05:00
bd95914e88
implement function to check usb connection
2021-03-18 10:00:01 +05:30
670375dc0d
Merge pull request #4426 from kmatch98/main
...
Add getter for displayio.Palette item transparency/opacity.
2021-03-17 18:13:39 -07:00
720d242b4f
doc fix
2021-03-17 16:38:10 -05:00
c157ada90c
displayio.Bitmap: Make memoryview()able
2021-03-17 16:26:45 -05:00
c37a1f45f3
ran pre-commit for formatting fixes
2021-03-17 11:00:32 -05:00
ef91e1752c
merge upstream/main
2021-03-17 09:30:51 -05:00
bfc8c89536
Merge pull request #4403 from jepler/bitmap-read-2
...
bitmaptools: Add readinto, arrayblit
2021-03-17 07:57:31 -05:00
592f89f6ae
add back peculiar r to docstring
2021-03-16 20:45:55 -05:00
5c3cce6f5d
add is_transparent getter to displayio.Palette
2021-03-16 20:43:23 -05:00
074ba1daff
more doc fixes
2021-03-16 19:05:06 -05:00
5810004bc9
fix doc error
2021-03-16 19:01:38 -05:00
e1dd396de7
fix stub docs
2021-03-16 13:37:04 -05:00
58679dc038
Merge remote-tracking branch 'origin/main' into bitmap-read-2
2021-03-16 12:21:50 -05:00
97b6664201
re-format with uncrustify
2021-03-16 12:20:09 -05:00
870dadc85a
update more docstrings
2021-03-16 10:42:46 -05:00
a367e84cea
update docstrings
2021-03-16 10:35:40 -05:00
227ac67463
Add reverse_rows option to bitmaptools.readinto
2021-03-16 10:01:12 -05:00
bdc368895f
Formatting
2021-03-16 08:39:44 -05:00
542fb58673
add arrayblit
2021-03-15 20:36:44 -05:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
3cbff45f9a
Merge pull request #4407 from jposada202020/RTC_doc_corrections
...
RTC and Touchin docs changes
2021-03-14 20:52:19 -05:00
651f54b4cc
fix docs
2021-03-14 15:47:15 -05:00
1386a8104a
RTC and Touchin docs changes
2021-03-14 16:20:40 -04:00
da030ce7d8
Merge pull request #4402 from jposada202020/analogio_doc_corrections
...
Change in documentation in Analogio
2021-03-14 15:00:48 -05:00
9133b23a37
bitmaptools: Add readinto
...
When reading uncompressed bitmap data directly, readinto can work
much more quickly than a Python-coded loop.
On a Raspberry Pi Pico, I benchmarked a modified version of
adafruit_bitmap_font's pcf reader which uses readinto instead of
the existing code. My test font was a 72-point file created from Arial.
This decreased the time to load all the ASCII glyphs from 4.9 seconds to
just 0.44 seconds.
While this attempts to support many pixel configurations (1/2/4/8/16/24/32
bpp; swapped words and pixels) only the single combination used by
PCF fonts was tested.
2021-03-14 13:57:46 -05:00
6a56d5dc73
Change in documentation in Analogio
2021-03-14 04:15:35 -04:00
b413535ee1
Merge pull request #4376 from kmatch98/displayio_bitmap
...
add fill_region and draw_line to bitmap_tools
2021-03-12 16:50:39 -08:00
5689307798
Changed frequency to match PIO having 2 instructions
2021-03-11 19:32:44 -06:00
b02b1e9979
Set frequency default 60Mhz
2021-03-11 19:32:44 -06:00
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
6b2c9985ff
Extract RTC, implement fake RTC deepsleep
2021-03-11 17:50:05 -05:00
a9afa0d9d4
Move input checks to shared-module, update docstrings
2021-03-11 16:18:17 -06:00
08c5dbb003
use return values in STM PWMOut constructor, not exceptions
2021-03-11 08:52:47 -05:00
85f0f07d51
add fill_region and draw_line to bitmaptools
2021-03-10 11:37:27 -06:00
24ac8152dd
Clarify further; fix type error
2021-03-07 20:32:59 -05:00
1a6c021239
Add clarifying comment re carriage-return char.
2021-03-07 17:04:27 -05:00
a6cb7d7069
Document readline() and readlines()
2021-03-07 15:34:07 -05:00
d919b7fa4a
fix #4352
2021-03-07 14:13:20 -05:00
8594396a07
Add caveat for usb_cdc.Serial.connected
2021-03-07 14:07:07 -05:00
51c7a49853
Merge branch 'main' into nrf52-sleep
2021-03-07 20:50:53 +09:00
b23c5b2d68
nvm: fix doc markup
...
closes #4336
2021-03-06 07:54:54 -06:00
cd48c5ee83
Merge pull request #4315 from dhalbert/rp2040-i2c-short-writes
...
RP2040: Implement short I2C writes (2 bytes or less) using bitbangio
2021-03-03 12:42:47 -05:00
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
f31b472309
Merge remote-tracking branch 'adafruit/main' into rp2040-i2c-short-writes
2021-03-02 15:17:12 -05:00
9939c59caa
wip
2021-03-02 15:16:55 -05:00
e4f0e47d9f
Merge pull request #4233 from pewpew-game/displayio-group-list
...
displayio: make Group use a python list internally
2021-03-02 09:59:58 -08:00
f1792c8474
Extract EXTI, create base sleep framework
2021-03-02 11:41:53 -05:00
d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup
...
Add `bitmaptools` module
2021-03-01 18:24:12 -08:00
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
f722df70c8
Fix formatting in SPI docs
...
Close #4293 by changing `..note::` to `.. note::`.
2021-03-01 09:06:24 -08:00
3e47e00291
address the pretending-to-deep-sleep issue.
2021-02-28 15:57:37 +09:00
24473b7983
Separate out mp_obj_list_insert for use in display.Group
...
Note that for some reason this makes the binary 500 bytes larger!
2021-02-27 21:13:55 +01:00
38fb7b511b
Remove max_size from displayio.Group
...
Still accept it as an argument. Add deprecation note.
2021-02-27 20:52:38 +01:00
e9953754ea
Add displayio.Group.sort() method
2021-02-27 20:52:38 +01:00
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp
2021-02-25 16:59:15 -08:00
52bc935fa7
A few minor fixes for corner cases
...
* Always clear the peripheral interrupt so we don't hang when full
* Store the ringbuf in the object so it gets collected when we're alive
* Make UART objects have a finaliser so they are deinit when their
memory is freed
* Copy bytes into the ringbuf from the FIFO after we read to ensure
the interrupt is enabled ASAP
* Copy bytes into the ringbuf from the FIFO before measuring our
rx available because the interrupt is based on a threshold (not
> 0). For example, a single byte won't trigger an interrupt.
2021-02-25 16:50:57 -08:00
c883bb773b
Rearrange input parameters
2021-02-24 16:03:50 -06:00
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
cd4d55a573
yet another sphinx try
2021-02-24 08:05:40 -06:00
e858db07f0
Another sphinx try
2021-02-24 07:59:32 -06:00
2815c6dafa
More sphinx attempts
2021-02-24 07:49:34 -06:00
af5ad50125
More sphinx fixes
2021-02-24 01:18:30 -06:00
18658b77f3
Sphinx docstring updates
2021-02-24 01:00:13 -06:00
b720028642
Add bitmaptools module
2021-02-23 23:23:14 -06:00
67406488d1
merge from upstream; re-alphabetize
2021-02-19 14:22:50 -05:00
9d4442e298
handle reads/writes larger than buffers; add .write_timeout
2021-02-19 14:15:31 -05:00
b12ccefbe6
uart implementation for rp2040
2021-02-19 18:36:00 +05:30
5c758523c0
requested changes
2021-02-18 17:19:34 -06:00
ffae89b191
bitops: fix argument parsing
2021-02-18 16:10:57 -06:00
d56fe7691d
bitops: doc correction
2021-02-18 15:44:51 -06:00
7fd4567893
bitops: rename from _bit_transpose, describe the algorithm
2021-02-18 15:41:23 -06:00
ac0ffc5656
_bit_transpose: fix docs
2021-02-18 11:45:48 -06:00
c284728621
bit_transpose: Support from 2 to 7 strands, not just 8
2021-02-18 11:33:13 -06:00
9cf7d73c6c
core: add bit_transpose function
...
.. this version can only handle exactly 8 bits "across". The restriction
may be relaxed in a future revision.
2021-02-18 11:32:47 -06:00
ed49c02feb
add timeout; finish up for PR
2021-02-17 23:24:11 -05:00
c26de0136a
works! no timeouts
2021-02-16 17:39:36 -05:00
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
93d788543c
Merge remote-tracking branch 'adafruit/main' into secondary-cdc
2021-02-15 20:03:53 -05:00
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
3e4328140c
fix off-by-one PWM top issue
2021-02-12 15:53:31 -05:00
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
d7305182f0
Remove adafruit_bus_device.SPIDevice.spi
2021-02-11 10:33:57 -05:00
ba2b65586f
sdcardio: add a note about sharing the SPI bus with SD cards and other devices
...
Similar to https://github.com/adafruit/Adafruit_CircuitPython_SD/pull/44
2021-02-09 10:07:21 -06:00
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
be500fd15c
Merge pull request #4136 from hierophect/socket-portmax
...
Socket: fix inconsistencies in argument types
2021-02-08 16:23:20 -05:00
f66caa29b9
Merge pull request #4146 from gamblor21/busdevice_write_read_fix
...
Fix write_then_readinto in adafruit_bus_device I2CDevice
2021-02-08 11:33:06 -05:00
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
ea4a12005a
Fix write_then_readinto
2021-02-06 10:33:38 -06:00
4d26ffb447
Make timeout core types consistent
2021-02-05 12:32:41 -05:00
9140bfb5b2
Merge pull request #4049 from hierophect/sslsocket
...
Separate SSLSocket from Socket
2021-02-02 10:35:07 -08:00
a861498404
Merge pull request #4114 from tannewt/spidevice_spi
...
Add .spi accessor to SPIDevice
2021-02-02 09:53:10 -08:00
8fd6bff727
Add .spi accessor to SPIDevice
...
Fixes #4108
2021-02-01 20:03:23 -08:00
8789a2c8a9
Merge pull request #4110 from microDev1/rtc-rp
...
RP2040: Support for RTC
2021-02-01 19:47:44 -08:00
db7a962802
Merge pull request #4112 from gamblor21/longint_busdevice_fix
...
Fixed for boards without longint
2021-02-01 19:24:57 -08:00
0cf2df48c4
Fixed for boards without longint
2021-02-01 17:58:34 -06:00
ec03267035
rtc implementation for rp2040
2021-02-02 00:00:00 +05:30
459f323247
Merge pull request #4087 from DavePutz/cpu_temp_doc
...
Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus
2021-02-01 12:50:37 -05:00
66639b237f
Merge remote-tracking branch 'upstream/main' into sslsocket
2021-02-01 11:43:01 -05:00
8277ffca86
Fix hash, close, error bugs
2021-02-01 11:04:12 -05:00
e1838ff335
Fix typo in documentation.
2021-01-29 11:57:36 -06:00
a724f6f954
Fix documentation builds
2021-01-29 11:58:02 -05:00
cfd6ffc649
Adding files for cpu temperature fix
2021-01-28 16:06:30 -06:00
0098909757
RGBMatrix: change default to serpentine=True
...
The "serpentine" display order leads to much better wiring (shorter
ribbon cables) and is preferred. Change the default accordingly.
2021-01-28 11:42:19 -06:00
45b3c9ae42
Merge pull request #4068 from jepler/update-protomatter-tiling
...
protomatter: Update to version that supports tiling
2021-01-26 17:31:26 -08:00
189ec2fc60
Disallow tile=0
2021-01-26 16:51:31 -06:00
20c9f25a65
rgbmatrix: Eliminate some duplicated height-calculating code
...
This was hard to write, so let's have it written in 2 places instead
of 4.
2021-01-26 14:35:26 -06:00
368977fb90
RGBMatrix: Additional tile tweaks
...
* Introduce explicit serpentine: bool argument instead of using negative
numbers (thanks, ghost of @tannewt sitting on one shoulder)
* Fix several calculations of height
Testing performed (matrixportal):
* set up a serpentine 64x64 virtual display with 2 64x32 tiles
* tried all 4 rotations
* looked at output of REPL
2021-01-26 14:33:48 -06:00
815ab5277b
Fix stubs error, out of sockets error, invalid TLS leak
2021-01-26 14:13:12 -05:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
ccdc97d23e
Update documentation for microprossors with multiple cpus
2021-01-26 09:47:21 -06:00
51f0544405
protmatter: Update to version that supports tiling
2021-01-26 09:19:44 -06:00
4241fd4b18
Merge pull request #4051 from jamesbowman/main
...
EVE: change fixed-point integer arguments to floating point
2021-01-25 14:44:48 -08:00
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
9f34ec78c4
Separate Socket and SSLSocket, add LWIP connect
2021-01-25 17:07:25 -05:00
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
8889ac12e1
Add supervisor.set_next_code() function (prototype).
...
Part of #1084 .
2021-01-23 23:05:31 +01:00
dff3423c23
Change from fixed-point integer arguments to floating point in EVE API functions
...
Changed calls: PointSize(), LineWidth(), VertexTranslateX() and VertexTranslateY()
Units for all the above are now pixels, not fixed-point integers. This matches OpenGL.
Docstrings updated accordingly
2021-01-22 15:52:46 -08:00
10a44af536
Merge pull request #3980 from anecdata/reasons2
...
ESP32-S2 update docs to match code usage of IPPROTO_*
2021-01-21 15:16:55 -08:00
f88a896c03
Merge pull request #3854 from hierophect/esp-tcpserver
...
ESP32S2: Implement TCP Server bindings
2021-01-21 17:25:14 -05:00
2b4ad1ed03
Fix warnings that come from -O3 (I think)
2021-01-20 19:16:56 -08:00
733094aead
Add initial RP2040 support
...
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
d3995eaf97
Fixes from draft PR
2021-01-16 14:21:57 -06:00
b609bc0124
Removed unused include
2021-01-16 14:21:57 -06:00
ea0e2f80b7
Changing to duck-typing
2021-01-16 14:21:57 -06:00
287770f885
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-14 10:21:08 -05:00
8febdee264
Rename to match WIFI_REASON. Also include specific error code in "Unknown failure" Exception.
2021-01-13 23:47:23 -06:00
d1249fbe47
Include all reason codes.
2021-01-13 23:46:52 -06:00
37a8c1c575
Complete non-blocking implementations, add socket close checking
2021-01-13 19:05:07 -05:00
e703e06595
Update shared-bindings/socketpool/SocketPool.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-13 11:17:37 -06:00
4cdb298a20
WIP of non-blocking calls
2021-01-12 15:05:28 -05:00
f07dd487af
change IPPROTO_* comments to match usage in current shared-bindings and common-hal code
2021-01-12 13:49:50 -06:00
1ca29ec47c
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-12 09:23:07 -06:00
4db55652a3
Merge pull request #3964 from dhalbert/ble-timing-fixes
...
Round BLE timing values; fix timeout check
2021-01-11 16:52:14 -08:00
081249f796
Merge pull request #3944 from BennyE/wifi-authmode
...
esp32-s2: Adding authmode keyword
2021-01-11 16:05:28 -08:00
Scott Shawcroft
gabewillen
Lucian Copeland
Limor "Ladyada" Fried
Dan Halbert
Scott Shawcroft
Neradoc
James Carr
Jeff Epler
Dan Halbert
Artyom Skrobov
microDev
Mark
anecdata
jun2sak
Jeff Epler
James Carr
Jeff Epler
Kevin Matocha
gamblor21
jposada202020
ajs256
Radomir Dopieralski
root
Christian Walther
James Bowman