17886828c8
cc3200/gccollect: Use MP_STATE_THREAD(stack_top) to get top of stack.
2016-06-28 11:28:52 +01:00
0455755296
cc3200: Use xTaskCreateStatic instead of osi_TaskCreate.
...
This allows to statically allocate the TCB (thread control block) and
thread stack in the BSS segment, reducing the need for dynamic memory
allocation.
2016-06-28 11:28:52 +01:00
eef4f13a33
cc3200: Add basic threading capabilities.
...
Can create a new thread and run it. Does not use the GIL at this point.
2016-06-28 11:28:51 +01:00
e4404fbef0
cc3200: Unmount all user file systems after a soft reset.
2015-11-16 23:43:47 +01:00
40274fec9c
lib/pyexec: Move header pyexec.h from stmhal directory.
2015-11-09 13:13:09 +00:00
731f359292
all: Add py/mphal.h and use it in all ports.
...
py/mphal.h contains declarations for generic mp_hal_XXX functions, such
as stdio and delay/ticks, which ports should provide definitions for. A
port will also provide mphalport.h with further HAL declarations.
2015-10-31 19:14:30 +03:00
f4decdc4a3
cc3200: Switch from HAL_Delay() to mp_hal_delay_ms().
2015-10-29 20:38:44 +03:00
eb9a3ec654
cc3200: Disable uheapq and uhashlib.
...
Those two are rarely used features and better to have the extra heap.
2015-09-27 18:04:11 +02:00
37a2015cc5
tests/wipy: Add machine module tests.
2015-09-27 17:35:58 +02:00
c92e6a45eb
cc3200: Rename pyb module to machine.
2015-09-27 16:50:27 +02:00
ef369249cb
cc3200: Implement support for os.dupterm().
2015-09-27 11:27:24 +02:00
57fa14b5be
cc3200: New WLAN API including test.
2015-09-27 01:50:52 +02:00
dbdcb58d64
cc3200: New irq API, affects all classes that provide the irq method.
2015-09-27 01:48:20 +02:00
dffa9f6da6
cc3200: New SD and RTC API plus os and time modules' extensions.
2015-09-21 22:30:32 +02:00
4d7fa05b43
cc3200: Improve Pin and UART implementation.
...
Deassign pins af before assigning. Make uart.any() return the
correct value everytime, this requires interrupts to be always
enabled.
2015-09-10 08:00:12 +02:00
f91f212d9f
cc3200: New UART API plus related test.
2015-09-10 07:59:47 +02:00
d5e256486e
cc3200: Re-work Pin class according to the new API.
...
Also add relevant test.
2015-09-10 07:59:35 +02:00
e3f8777ee8
cc3200: Implement new Pin API.
2015-09-10 07:59:03 +02:00
11d21081b4
cc3200: Rework SD API. Increase heap to avoid malloc failures.
2015-08-16 20:17:58 +02:00
7da2fdc3cd
cc3200: On the first boot, always make AP ssid='wipy-wlan'.
...
On the first boot don't add the MAC address, this is to speed up
factory testing.
2015-08-09 22:16:45 +02:00
2673374d18
cc3200: Refactor PRCM special user bits implementation.
2015-08-09 22:15:18 +02:00
aa58c7ec74
cc3200: Append last 2 bytes of the MAC address to the default SSID.
2015-07-30 00:43:16 +02:00
f738424403
cc3200: Remove superflous assignment since the result is not used.
2015-07-15 14:45:24 +02:00
753a8e8bc4
cc3200: Create /flash/cert folder if it doesn't exist.
2015-07-15 14:25:35 +02:00
e955089da0
cc3200: Implement new OTA mechanism with 2 firmware update slots.
2015-07-15 14:25:28 +02:00
5685b565c3
cc3200: Create /flash/sys and /flash/lib directories while booting.
2015-07-07 16:13:40 +02:00
a3acaa000c
cc3200: Add antenna selection feature to WLAN.
2015-06-07 00:06:27 +02:00
d07de2d307
cc3200: Move the STDIO UART pin configuration to mpconfigboard.h.
2015-05-27 09:45:29 +02:00
95f19b4542
cc3200: Remove duplicated checks for boot.py and main.py existency.
2015-05-25 21:14:39 +02:00
ed56b0baba
cc3200: Finally unlock the full wake on WLAN feature set.
2015-05-22 19:53:33 +02:00
e800db562f
cc3200: Add uhashlib. Supports SHA1 and SHA256.
2015-05-20 11:44:24 +02:00
8e611e8414
cc3200: Add Timer module. Supports free running, PWM and capture modes.
2015-05-17 12:34:49 +02:00
f54bdecff2
cc3200: Implement Sleep.wake_reason()
2015-05-03 11:21:14 +02:00
6f218d7472
cc3200: Move wlan_init0() to the boot section.
...
This one creates a semaphore, therefore it must be executed only
after a hard reset (or when coming out of hibernation).
2015-04-29 16:10:40 +02:00
259eaab9a9
cc3200: Clean up and reduce use/include of std.h.
2015-04-18 14:29:28 +01:00
6e25d955f4
cc3200: Enable long filename support in FatFS.
...
This has implications all over the place. I have to admit that
you can instantly see that usability improves, but it costs 3K.
At the same time I took the oportunity to rename the '/SFLASH'
drive to '/flash' which improves compatibility with the pyboard.
2015-04-11 13:35:05 +02:00
18bd51707c
cc3200: Enable the stdio UART for the LaunchXL only.
2015-04-07 12:12:16 +02:00
c7acfc90b9
cc3200: Enable pull-ups for the STDIO UART pins.
2015-04-07 10:50:20 +02:00
b9d850227d
cc3200: Add WLAN AP specific settings for each board.
2015-04-04 22:09:55 +02:00
d460a30711
cc3200: Add specific version file for the CC3200 port.
...
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
2015-03-31 14:34:09 +02:00
2d717ad97a
cc3200: Add callback support to the UART for RX interrupts.
2015-03-26 10:28:43 +01:00
26d230419c
cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.
...
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
2015-03-25 15:22:32 +01:00
e15f8198bc
cc3200: Keep WLAN enabled during the soft reset.
2015-03-25 15:22:16 +01:00
59f6831336
cc3200: Reduce soft reset time. WLAN is not reinit, just reenabled.
2015-03-21 11:31:29 +01:00
cd9bc14c8f
cc3200: Add SPI module.
...
Only MASTER mode is supported. Transfer width is configurable to
8, 16 or 32 bits.
2015-03-21 11:26:47 +01:00
f8ee88bbe0
cc3200: Move server methods from WLAN to the network module.
2015-03-19 17:08:25 +01:00
0e96d1b3f1
cc3200: Add parameter to wlan_stop() for custom timeout values.
2015-03-18 21:55:08 +01:00
6de1b39368
cc3200: Make peripheral objects static.
...
This prevents duplication of objects in the sleep list. Also helps
with reducing the code size by ~100 bytes.
2015-03-17 13:26:07 +01:00
2c103d5200
cc3200: Rewrite the PRCM RTC functionality methods.
...
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
2015-03-14 10:08:47 +01:00
c7fabe1f3e
cc3200: Remove unneeded code from modwlan and optimize startup time.
...
These changes also help reduce the hibernate wake-up time to 1s.
2015-03-14 10:08:43 +01:00
Damien George
danicampora
Paul Sokolovsky
danicampora