Commit Graph

9 Commits

Author SHA1 Message Date
Damien George dfa75f33a5 stm32/sdio: Don't explicitly disable DMA2 on deinit of SDIO.
Because DMA2 may be in use by other peripherals, eg SPI1.

On PYBD-SF6 it's possible to trigger a bug in the existing code by turning
on WLAN and connecting to an AP, pinging the IP address from a PC and
running the following code on the PYBD:

    def spi_test(s):
        while 1:
            s.write('test')
            s.read(4)

    spi_test(machine.SPI(1,100000000))

This will eventually fail with `OSError: [Errno 110] ETIMEDOUT` because
DMA2 was turned off by the CYW43 driver during the SPI1 transfer.

This commit fixes the bug by removing the code that explicitly disables
DMA2.  Instead DMA2 will be automatically disabled after an inactivity
timeout, see commit a96afae90f

Signed-off-by: Damien George <damien@micropython.org>
2021-11-22 11:57:37 +11:00
iabdalkader f4dce15c87 stm32/sdio: Fix undefined reference to DMA stream on H7.
Follow up to a96afae90f
2021-07-01 12:21:32 +10:00
Damien George a96afae90f stm32/sdio: Fix case of SDIO DMA turning off mid transfer.
The DMA driver will turn off DMA if it hasn't been used for an amount of
time (to save power).  The SDIO driver for cyw43 WLAN was not informing the
DMA driver that it was using DMA and there was a chance that the DMA would
turn off in the middle of an SDIO DMA transfer.  The symptoms of this would
be printing of SDIO error messages and a failure to communicate with the
cyw43 WLAN module.

This commit fixes this issue by changing the SDIO driver to use the
dma_nohal_XXX API to initialise and start the DMA.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-21 00:08:13 +10:00
iabdalkader a1111b83ed stm32/sdio: Allow configuring the SDMMC periph used for SDIO.
This can now be selected by setting MICROPY_HW_SDIO_SDMMC, which defaults
to 1, ie SDMMC1.  The pins can also be selected and default to the standard
C8/C9/C10/C11/C12/D2.
2021-04-30 11:26:04 +10:00
iabdalkader 80788154b3 stm32/sdio: Add functions to re/enable SDIO/SDIOIT. 2021-04-30 01:12:08 +10:00
iabdalkader 7497d891a7 stm32/sdio: Don't change any DMA2 settings on H7 MCUs.
DMA2 clock and registers should be left in their current state in the H7
build.
2020-10-06 23:31:08 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George 257b17ec10 stm32/sdio: Add support for H7 MCUs.
The cyw43 driver on stm32 will now work with H7 MCUs.
2020-01-31 23:25:18 +11:00
Damien George 12ed6f91ee stm32: Add low-level SDIO interface for cyw43 driver. 2019-06-03 16:53:46 +10:00