b607631ae1
feat(swan_r5): UF2 support, with UF2 family IDs assigned to stm32 chipsets.
2022-05-25 14:18:37 -07:00
38f91539dc
Merge pull request #6432 from CytronTechnologies/add-maker-zero-samd21
...
Add new board: Cytron Maker Zero SAMD21
2022-05-25 13:58:33 -04:00
1fb210bd40
Merge pull request #5491 from pypewpew/remove-gamepadshift
...
Remove gamepadshift module
2022-05-25 13:58:06 -04:00
aef5bc40fb
Deleted white spaces
2022-05-26 00:13:27 +08:00
b143314b22
Espressif: fix allocation of multiple Incremental Encoders
2022-05-24 22:37:24 -04:00
9ed71f0c09
Add Cytron Maker Zero SAMD21
2022-05-25 10:09:30 +08:00
0b99967839
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:58 +08:00
46f4fcc42f
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:17 +08:00
9385f793dc
Add Cytron Maker Zero SAMD21
2022-05-25 10:07:33 +08:00
6fa552e257
Delete board.c
2022-05-25 10:04:06 +08:00
5453b331f7
Delete mpconfigboard.h
2022-05-25 10:03:53 +08:00
8806f5b5d8
Delete mpconfigboard.mk
2022-05-25 10:03:45 +08:00
9649d80ea3
Delete pins.c
2022-05-25 10:03:34 +08:00
4e467b7f34
Add Cytron Maker Zero SAMD21
2022-05-25 09:46:20 +08:00
c0152e7dab
Remove gamepadshift module
...
Everything should be using the keypad module instead.
Note: there are several boards that still had gamepadshift enabled. I
did not contact their authors to make sure they already switched to
keypad in their code and documentation. We should probably wait with
merging this for their go ahead.
2022-05-25 00:48:55 +02:00
791064a934
Merge pull request #6427 from dhalbert/8.0.0-onewireio
...
Remove busio.OneWire and bitbangio.OneWire in favor of onewireio.OneWire
2022-05-24 15:32:33 -04:00
ecd30d2338
Merge pull request #6428 from dhalbert/8.0.0-restore-rainbowio
...
restore rainbowio to small builds
2022-05-24 15:32:08 -04:00
8665e85ea6
Merge pull request #6424 from ladyada/main
...
add esp32s3 tft
2022-05-24 15:31:48 -04:00
99d7d0d8bb
Disable ulab for ESP32-S3 TFT
2022-05-24 14:59:34 -04:00
0ea72d61e0
Merge pull request #6425 from KurtE/teensy_retain_fs
...
Teensy Builds retain Filesystem
2022-05-24 11:03:47 -07:00
335c93c044
restore rainbowio to small builds
2022-05-24 12:34:08 -04:00
74c92ffe9e
Remove busio.OneWire and bitbangio.OneWire
2022-05-24 12:26:33 -04:00
92fa02effa
Change 12- to 16-bit scaling to match other ports
...
Result is identical, implementation just resembles other ports instead of being all 1337 about it.
2022-05-24 08:49:05 -07:00
c3f58193ca
Correctly scale analog reading per issue #4794
2022-05-24 08:46:39 -07:00
e22de975b3
try just bitbangio remove
2022-05-24 11:46:03 -04:00
5ef1f2dd5a
Correctly scale analog reading per issue #4794
2022-05-24 08:45:14 -07:00
44b31b098e
Correctly scale analog reading per issue #4794
2022-05-24 08:44:09 -07:00
e9b9f0b13f
Correctly scale analog reading per issue #4794
2022-05-24 08:42:00 -07:00
eefba16644
Correctly scale analog reading per issue #4794
2022-05-24 08:40:51 -07:00
9439ce04bd
try to remove some space?
2022-05-24 11:28:55 -04:00
d47662c448
Teensy Builds retain Filesystem
...
Changed a few things in the link step that satisfies the teensy
loader apps, both the teensy.exe as well as the teensy_loader_cli
such that when you program the board again it should retain the
file sytem that is stored in the upper area of the Flash
2022-05-24 07:06:16 -07:00
bb4beb3fab
add esp32s3 tft
2022-05-23 23:57:35 -04:00
3179db4ef4
move frozen adafruit_circuitplayground to express subdirectory
2022-05-23 22:11:26 +02:00
64df933a83
Merge pull request #6422 from dahanzimin/main
...
Repair mixgo_ce frozen lib to frozen/
2022-05-23 15:00:42 -04:00
0f1973b037
Merge pull request #6418 from solderparty/stamp_round_board
...
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-23 19:42:56 +02:00
943ab120ad
Merge pull request #6414 from dhalbert/pico-sdk-1.3.1
...
update pico-sdk to 1.3.1
2022-05-23 07:31:05 -07:00
6454c5895b
Repair import and stock in under the frozen / directory
2022-05-23 11:19:11 +08:00
2b0518233b
rp2040 PulseIn improvements
2022-05-23 00:45:06 +00:00
893fc66d16
Use common_hal_rp2pio_statemachine_construct for PulseIn
2022-05-23 00:45:06 +00:00
d2d3b27822
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-22 15:52:25 +02:00
6f4f7e089e
Merge pull request #6383 from dahanzimin/main
...
Add MixGo CE board
2022-05-22 08:47:53 -04:00
e5a5ffb9b0
Update board.c
2022-05-22 11:37:39 +08:00
37e376631a
Fix format issues
2022-05-22 11:22:58 +08:00
b62799a798
Add mixgo_ ce_ Serial function, repair sdkconfig
2022-05-22 10:42:56 +08:00
9c643aa907
Merge branch '7.3.x' into merge-7.3.0-rc.1-to-main
2022-05-21 12:57:46 -04:00
338e14d9d4
shrink arduino_mkr1300
2022-05-21 10:21:59 -04:00
3e47d24fb9
Update submodule and create tag
2022-05-21 10:52:14 +08:00
e852b28bb2
update pico-sdk to 1.3.1
2022-05-20 17:52:35 -04:00
309dab4c75
merge 7.3.0-rc.1 changes to main
2022-05-20 15:37:56 -04:00
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
3c20b5f95f
use validator in mimx UART constructor
2022-05-20 00:04:49 -04:00
4356a12504
Update mpconfigboard.mk
2022-05-20 10:55:23 +08:00
73f2621cda
Repair No newline at end of file
2022-05-20 10:38:14 +08:00
525262cd9a
Merge branch 'main' into main
2022-05-20 10:04:02 +08:00
e3896be345
Modify mixgoce_ Lib is a submodule
2022-05-20 09:46:55 +08:00
f1f9ba2371
Add support for WeAct Studio Pico
2022-05-19 23:51:25 +02:00
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
8987bf18d0
Add Winbond flash substitute to boards
2022-05-16 22:39:25 +02:00
624a00ac45
shrink circuitplayground_express_displayio
2022-05-14 08:54:46 -04:00
9fb4582cc8
Merge pull request #6393 from todbot/main
...
fix SPI pin names qtpy esp32s3
2022-05-13 21:54:55 -04:00
936f5bf23e
Merge pull request #6338 from jepler/fix-display-invalid-sh1107
...
Fix display invalid sh1107
2022-05-13 20:33:43 -04:00
d2d08fc944
fix SPI pin names qtpy esp32s3
2022-05-13 16:48:13 -07:00
64ca3aa359
Merge pull request #6387 from SimonVail/main
...
Lilygo TTGO T-OI Plus ESP32C3
2022-05-13 18:31:50 -04:00
951eea7748
Merge pull request #6391 from tekktrik/doc/add-additional-builtins-docs
...
Add additional documentation for modules, builtin exceptions
2022-05-13 15:59:39 -04:00
28b14e05e3
shrink thunderpack_v12
2022-05-13 15:45:12 -04:00
1f0bdad083
Update ports/espressif/boards/lilygo_ttgo_t-oi-plus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-05-13 15:02:26 -04:00
395b550fe3
Merge pull request #6389 from tannewt/add_ble_user_reset
...
Add two stage reset for BLE
2022-05-13 14:28:43 -04:00
9028bf213d
Merge pull request #6331 from pypewpew/pewpew_lcd
...
Add new board pewpew_lcd
2022-05-13 12:33:08 -04:00
289fdc1241
Added link to library and guide for rp2pio
2022-05-13 11:15:26 -04:00
3e85cfe26b
Fix ESP and HCI build
2022-05-12 15:23:26 -07:00
ef4d298ca8
Update pins.c
2022-05-12 17:49:48 -04:00
0d92b0a155
Update board.c
2022-05-12 17:46:49 -04:00
b1935975a2
Update board.c
2022-05-12 17:27:48 -04:00
269d51d023
Add two stage reset for BLE
...
This lets the BLE stack run through the wait period after a VM run
when it may be waiting for more writes due to an auto-reload.
User BLE functionality will have their events stopped. Scanning and
advertising is also stopped.
2022-05-12 13:20:44 -07:00
c5db1280ee
Update mpconfigboard.mk
2022-05-12 13:21:58 -04:00
6bdd128fb3
Add files via upload
2022-05-12 13:18:39 -04:00
f69a293795
Create sdkconfig
2022-05-12 13:18:17 -04:00
a4f505dcab
Delete ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3 directory
2022-05-12 13:17:17 -04:00
0b586e9c94
Update board.c
2022-05-12 12:43:52 -04:00
6fe728a9d2
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/pins.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:59 -04:00
6908f5a97e
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/board.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:52 -04:00
b6e6ee7505
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/mpconfigboard.mk
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:44 -04:00
b9ea7458ab
Add files via upload
2022-05-12 11:41:53 -04:00
35d78c135a
Create sdkconfig
2022-05-12 11:41:29 -04:00
f86ebe71b6
Delete Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:40:16 -04:00
0d1740ad27
Create Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:39:39 -04:00
d4b02e22ae
Thank you. I have applied for PID in espressif
2022-05-12 09:38:13 +08:00
b9c28742be
Added newline at the end of the file.
2022-05-11 15:30:45 +08:00
466f2a3644
Updated copyright information.
2022-05-11 15:25:32 +08:00
142ed2a024
Added Maker Feather AIoT S3.
2022-05-11 15:18:31 +08:00
9743aea7aa
Merge pull request #6334 from BigTuna94/add-rp2.65-f
...
Add new Keyboard - RP2.65-F
2022-05-10 16:52:39 -07:00
e7735a3631
Add new board pewpew_lcd
2022-05-10 22:25:32 +02:00
d48f961d0a
Add MixGo CE board
2022-05-10 18:56:13 +08:00
aa625f5ce4
Merge pull request #6366 from dhalbert/espressif-i2c-delay-fix
...
apply i2c delay fix from adafruit/esp-idf
2022-05-08 21:41:46 -04:00
bb46898572
Merge pull request #6361 from mwisslead/rp2040_pulsein_buffer_fix
...
Fix buffer issue for rp2040 PulseIn
2022-05-08 12:37:17 -04:00
8b026a2c38
apply i2c delay fix from adafruit/esp-idf
2022-05-08 09:49:18 -04:00
5f4f66774c
Merge pull request #6360 from jepler/statemachine-improvements
...
Statemachine improvements
2022-05-07 09:35:57 -05:00
561ed3739a
fix the docstrings
2022-05-07 07:49:16 -05:00
34427bd6ba
Update StateMachine.c
2022-05-06 22:36:24 -04:00
b7882edd01
Fix buffer issue for rp2040 PulseIn
2022-05-07 00:57:10 +00:00
b482a732c6
StateMachine: add swap flag
...
Always use DMA if swap flag is enabled.
Improve docs a bit
2022-05-06 15:22:43 -05:00
23c0fc8354
add ability to get, clear txstall flag
...
This can be used to make sure a PIO has actually finished all data
it was schedule to receive via a 'once' background_write
2022-05-06 15:22:43 -05:00
f776749ca3
Key off len, not buf, to decide if anything to DMA
2022-05-06 15:22:43 -05:00
1a9034ff7c
rp2pio: Allow background_write(None) to terminate after complete loop
2022-05-06 15:22:42 -05:00
5edc59f070
Merge pull request #6337 from jepler/property-storage
...
Optimize flash storage of properties
2022-05-06 09:55:18 -04:00
30904a8638
Merge pull request #6354 from dhalbert/espressif-dio-fixes
...
espressif: check properly for pull values
2022-05-05 22:44:29 -04:00
02ec1cebf6
Fix pin mapping for thing plus 2040
...
GPIO 26 was mapped to GPIO 28
2022-05-05 21:11:32 -04:00
a9d929627a
minor comment update
2022-05-05 14:40:49 -05:00
0f3eb9f46e
espressif: check properly for pull values
2022-05-04 22:51:27 -04:00
03b1a0284e
Merge pull request #6352 from billvanleeuwen424/removeDuplicateInclude
...
Removed duplicate include, fixes issue #6278
2022-05-04 21:47:17 -04:00
27cbf1321c
Merge pull request #6350 from dhalbert/samd-SRC_C-conditionals
...
Compile more SAMD things conditionally
2022-05-04 21:46:26 -04:00
76040a9380
removed duplicate include per issue 6278
2022-05-04 14:57:37 -04:00
b71ea29a8b
Merge pull request #6330 from KurtE/rp2040_uart_rs485
...
[RP2040] Allow any GPIO pin for RS485 direction pin
2022-05-04 13:32:36 -04:00
a7ec8b02e9
Merge pull request #6328 from KurtE/mixrt_uart_rs485
...
[mimxrt (teensy) Allow Any GPIO pin for RS485 pin
2022-05-04 13:30:09 -04:00
98ae047525
Compile more SAMD things conditionallly
2022-05-04 11:41:48 -04:00
e25e177a6f
Merge pull request #6343 from dhalbert/missing-board-LED
...
add board.LED to Metro M4 AirLift LIte and PyRuler
2022-05-03 19:17:04 -04:00
6378343bb3
As I mentioned in issue #6332 ,
...
there return of a read operation that times out with no data received
is inconsistent:
```
Adafruit CircuitPython 7.3.0-beta.1-31-g73f6b4867-dirty on 2022-04-30; Adafruit Feather RP2040 with rp2040
>>>
>>> import board, busio
>>> print(board.UART().read(5))
None
Adafruit CircuitPython 6.3.0 on 2021-06-01; FeatherS2 with ESP32S2
>>> import board,busio
>>> print(board.UART().read(5))
None
Adafruit CircuitPython 7.3.0-beta.1 on 2022-04-07; Adafruit Feather STM32F405 Express with STM32F405RG
>>> import board, busio
>>> print(board.UART().read(5))
None
Adafruit CircuitPython 7.3.0-beta.1-31-g73f6b4867-dirty on 2022-04-28; Teensy 4.1 with IMXRT1062DVJ6A
>>> import board, busio
>>> print(board.UART().read(5))
b''
```
Since I have a PR on this file anyway, I thought I would put in the change to make it consistent
with the other 3 board types I tried. Can not say about any of the others.
2022-05-03 13:39:49 -07:00
b181caaefc
add board.LED to Metro M4 AirLift LIte and PyRuler
2022-05-03 16:08:01 -04:00
7d7986b041
Add NEOPIXEL pin
...
Closes : #6307
2022-05-03 12:21:15 -05:00
510890b207
Enable squeezing property storage in flash
...
.. and enable it on atmel-samd and raspberrypi. On trinket_m0 this saves
96 net bytes of flash. There are 216 bytes actually saved by reducing
the flash storage size of the property descriptors, but added code in
several paths takes back over half of the 'raw savings'.
By organizing the "get-only" and "get-set" (but no delete) properties
each in a different section, we can represent then more efficiently.
Testing performed: that a get-only property can still be gotten but
can't be set or deleted; that a get-set property can sill be gotten or
set but can't be deleted. Tested on pygamer.
Because this requires linker file support, I only enabled it on two of
the ports.
2022-05-03 08:48:53 -05:00
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
...
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
...
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
a23ede8bc4
update USB VID/PID codes to match pidcodes request
2022-05-02 19:49:30 -04:00
7e622c3ff7
mpconfigboard.h also needs neopixel tweak
2022-05-02 13:23:55 -07:00
5d4e964de0
fix qtpy_esp32s3_nopsram neopixel pins
2022-05-02 13:04:05 -07:00
1fad381513
[RP2040] Allow any GPIO pin for RS485 direction pin
...
As I mentioned in issue #6310 while investigating that the Teensy port
did not support RS485_dir pin on normal GPIO pins, I found that it
was not implemented either as well on some other ports.
So was curious to implement it for RP2040 using same approach as I did
for the MIMXRT in the Pull Request #6328
That is I setup the specified pin as a normal GPIO pin in output mode
and then when you do a write operation it sets the GPIO pin logically
high, and when the write completes I set it logically low.
Note: knowing when I can set it low can be tricky, as you need to make
sure the full output has completed otherwise the data will be corrupted.
I am using: uart_tx_wait_blocking(self->uart);
Which looks like it is supposed to wait until the busy status is no
longer set, which the Reference manual mentioned, but this is leaving
the line logically set longer than I would like.
however I have tried running it with my hacked up version of the
Python Robotis DynamixelSDK and was able to talk to some AX servos.
I did have to change the library slightly for the RP2040, as the
library was erroring out when you did something like uart.read(5)
and it timed out without receiving anything. The RP2040 returned
None whereas I think the Teensy returned an empty set, which is what
it looks like the PySerial original code expects.
Not sure if anyone is interested in this, but thought i would
put it out as PR and see.
2022-04-30 14:31:08 -07:00
816a26e8b7
Merge pull request #6321 from dhalbert/samd21-ticks-for-display
...
Preserve ticks for displays across VMs
2022-04-28 09:37:21 -04:00
e63a327107
Bound PulseIn start indexes to maxlen.
2022-04-28 02:28:34 +00:00
b25d810af9
Preserve ticks for displays across VMs
2022-04-27 20:06:47 -04:00
73f6b48676
[mimxrt (teensy) Allow Any GPIO pin for RS485 pin
...
The existing code was setup that allowed you to specify an RTS
pin to be used as an RS485 direction pin, however there are no
RTS pins that are exposed on any of the Teensy 4.x boards.
Instead Arduino code base allowed you to specify any GPIO pin to
work instead. So I added the code in to facilitate this.
In addition the alternative code to wrap your own GPIO pin set high and low
around call(s) to uart.write() will not currently work, unless maybe you
fudge it and add your own delays as the write will return after the last
byte was pushed onto the UART’s hardware FIFO queue and as such if you
then immediately set the IO pin low, it will corrupt your output stream.
The code I added detects that you are setup to use the RS485 pin and
before it returns will wait for the UART’s Transfer complete status flag
to be set.
2022-04-27 11:26:08 -07:00
b7541088f4
shrink circuitplayground_express_crickit
2022-04-26 17:51:47 -04:00
7a77aae4be
shrink feather_m0_supersized
2022-04-26 16:52:43 -04:00
6b25ccf1a4
remove stray space
2022-04-26 14:26:42 -04:00
63abd9a9cf
Merge pull request #6312 from dhalbert/adjust-neopixel-timings
...
test and adjust NeoPixel timings on multiple ports
2022-04-26 13:18:47 -04:00
3a8fb4e956
Merge pull request #5852 from jepler/floppy
...
Add floppyio
2022-04-26 11:40:19 -04:00
c8e8171cec
Merge pull request #6300 from jepler/pio-continuous
...
rp2040: add a background write with looping to StateMachines
2022-04-26 10:09:02 -04:00
910662e833
Finalised motor 2040 pins
2022-04-26 12:56:31 +01:00
1ccf767112
Merge branch 'adafruit:main' into motor
2022-04-26 10:23:14 +01:00
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
0642917cf7
Merge pull request #6270 from FoamyGuy/tilegrid_bitmap_property
...
adding bitmap property to TileGrid
2022-04-25 09:09:28 -04:00
fdf8207e05
Merge pull request #6281 from ViktorWiz/w5100s-evb-pico
...
Added WIZnet board W5100s-evb-pico
2022-04-25 09:09:08 -04:00
5b7e0754dd
Merge pull request #6287 from KurtE/mimxrt_pwm
...
Fix PWM Support for the MIMXRT boards
2022-04-25 09:02:40 -04:00
1a89a2d366
fix doc build
2022-04-23 13:25:59 -05:00
989fb828d4
Revamp background writing
...
Now a 'once' and a 'loop' buffer can be specified.
'once' is useful for things like writing a neopixel strip in the background,
if you can guarantee the buffer contents are stable until the write is complete.
'loop' is useful for periodic things, like pwm & servos.
both together are useful for some special cases of pwm/servo, where a
transitional waveform needs to be played for one repetition and then
a new waveform needs to be played after that.
The API is renamed to reflect that it's a more generic 'background'
operation.
2022-04-23 13:09:36 -05:00
8d9dc1fb93
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 11:47:40 -07:00
3c343cf1b8
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 11:47:30 -07:00
3885bc9018
Merge pull request #6303 from DavePutz/issue_4452
...
Fix for issue #4452 - time.sleep on STM
2022-04-22 13:34:31 -04:00
1312e5c759
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:16:27 -07:00
f102c15bb4
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:40 -07:00
79dd2a6cd5
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Fix Comment spelling
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:29 -07:00
Matthew McGowan
Dan Halbert
Luqmanul Hakim Zulkifli
Dan Halbert
Radomir Dopieralski
Scott Shawcroft
Paint Your Dragon
lady ada
KurtE
Neradoc
arturo182
dahanzimin
Michael Wisslead
大汉子民
Fabian Affolter
Tod Kurt
SimonVail
Kattni
Alec Delaney
Kong Wai Weng
Jeff Epler
Guy Dupont
billvanleeuwen424
Zach Richard
ZodiusInfuser