Jeff Epler
747b6e8d2e
enable LCD_RGB_RESTART_IN_VSYNC
...
this "should" turn permanent tearing into temporary tearing.
2023-09-25 16:39:38 -05:00
Jeff Epler
6263f6af84
Switch to i2c init string for espressif lcd ev, expose values via board
2023-09-25 16:39:00 -05:00
Jeff Epler
65310ab615
update io expander table for rev C
2023-09-25 12:00:04 -05:00
Jeff Epler
ce22edba15
On Qualia, define board.TFT_IO_EXPANDER
...
these arguments make it easier to call ioexpander_send_init_sequence
2023-09-25 11:33:01 -05:00
Jeff Epler
04ad525c09
Re-work ioexpander_send_init_sequence
...
* can now send the I2C bus initialization code
* can now reset the display on an I/O expander pin
* parameters re-ordered to enable easy use with **board.TFT_IO_EXPANDER
2023-09-25 11:31:16 -05:00
Jeff Epler
409d1a83b6
displayio: fix releasing dot clock framebuffres in release_displays
...
this caused problems particularly when the framebuffer was not associated
with a display.
2023-09-25 09:45:35 -05:00
Scott Shawcroft
1c0155c99b
Merge pull request #8424 from tannewt/update-idf5.1
...
Update to ESP-IDF 5.1 and add C6 and H2 support
2023-09-22 16:35:27 -07:00
Scott Shawcroft
c726e87344
Enable BLE on H2 devkit
2023-09-22 15:05:20 -07:00
Scott Shawcroft
faa445e347
Three more board fixes
2023-09-22 10:03:20 -07:00
Scott Shawcroft
1480d70d17
Fix builds
...
* Disable bleio on C3 with 4MB flash.
* Fix gpio include path in board.c's that use it.
2023-09-22 10:03:20 -07:00
Scott Shawcroft
16d1dc2be0
Update all target sdkconfig
2023-09-22 10:03:20 -07:00
Scott Shawcroft
6649b17fb5
H2 works
2023-09-22 10:03:20 -07:00
Scott Shawcroft
39192cc896
C6 works
2023-09-22 10:02:35 -07:00
Scott Shawcroft
7bad82a219
C6 compiles, runs but wifi crashes
2023-09-22 10:02:35 -07:00
Scott Shawcroft
e22eefabd7
First stab at 5.1 update
2023-09-22 10:02:30 -07:00
Scott Shawcroft
d6b284ebb0
Merge pull request #8411 from tannewt/update-idf
...
Update to ESP-IDF 5.0
2023-09-22 09:45:35 -07:00
Dan Halbert
e964dd94f0
Merge pull request #8419 from reppad/fix-codespace
...
Fix codespace
2023-09-21 14:12:33 -04:00
Reppad
65e514ee49
Fix codespace
2023-09-20 22:04:50 +00:00
Scott Shawcroft
d4000023d8
Fix board def mistakes and cast
2023-09-20 11:45:45 -07:00
Scott Shawcroft
e39fbf1b26
Merge pull request #8401 from jepler/i2c-expander-init
...
Fast(ish) special purpose bitbang spi over i2c
2023-09-18 13:19:49 -07:00
Scott Shawcroft
c86b3ae19f
Update to merged idf changes
2023-09-18 11:18:04 -07:00
Jeff Epler
faa6887050
Use faster bus & remove final delay
...
this pushes the LCD initialization down to about 1.3s.
2023-09-18 13:00:18 -05:00
Jeff Epler
5a60b8d573
Only delay when explicitly called for
2023-09-18 12:58:54 -05:00
Jeff Epler
67e15bb6a2
makerfabs_tft7: rename properties to match docs
2023-09-18 10:35:49 -05:00
Jeff Epler
75ba82cdb0
lcd_ev: add timings; rename TFT -> TFT_PINS
2023-09-18 10:35:36 -05:00
Jeff Epler
4c682262e6
lcd_ev: fix compile error
2023-09-18 10:35:05 -05:00
Scott Shawcroft
0547ef61f9
Update dotclock for IDF 5.0
2023-09-15 14:43:37 -07:00
Jeff Epler
2a78d16b54
add board.DISPLAY
2023-09-15 14:49:29 -05:00
Jeff Epler
68af5543af
set up display at reset (yayay!)
2023-09-15 14:46:28 -05:00
Jeff Epler
91b98dc9d5
fix constness
2023-09-15 14:45:53 -05:00
Jeff Epler
cff65bbbe2
esp32 lcd ev: fix pin assignments
2023-09-15 14:10:32 -05:00
Jeff Epler
c7b7e22195
remove debug print
2023-09-15 11:16:43 -05:00
Scott Shawcroft
86990e9386
Merge pull request #8404 from BPI-STEAM/CircuitPython-main-PR
...
Update bpi_leaf_s3
2023-09-15 09:12:28 -07:00
Jeff Epler
a8b81ce943
Enhance unexpected keyword argument detection
...
Before, incorrect use when calling a core function would just say
"extra keyword arguments given"; now, it will name the argument:
```python
>>> Synthesizer(bad_kwarg="boo")
TypeError: unexpected keyword argument 'bad_kwarg'
```
2023-09-15 10:39:14 -05:00
Wind-stormger
970e61c8b4
Update bpi_leaf_s3
2023-09-15 02:20:46 +00:00
Scott Shawcroft
4087960dfd
Fix MDNS. C3 works
2023-09-14 15:04:07 -07:00
Jeff Epler
ef9f75ead1
Correct idle status of SCK pin
2023-09-14 14:56:39 -05:00
Jeff Epler
4b41fdb586
Fast(ish) special purpose bitbang spi over i2c
...
with the i2c bus operating at 400kHz this achieves a 4.8kHz SPI clock
rate which could be worse.
It accepts the same style of init sequence as displayio.
tested by scoping the pins on the espressif lcd dev kit with a dummy init sequence:
```python
dotclockframebuffer.ioexpander_send_init_sequence(
bus=bus,
i2c_address=expander_addr,
gpio_address=1,
gpio_data_len=1,
gpio_data=0xff,
cs_bit=1,
mosi_bit=3,
clk_bit=2,
init_sequence=init_sequence)
```
2023-09-14 14:42:48 -05:00
Scott Shawcroft
952118f6c3
Update new boards. Reduce memory use in S2
2023-09-14 11:19:38 -07:00
Scott Shawcroft
17ced21e04
Merge pull request #8397 from weblate/weblate-circuitpython-main
...
Translations update from Hosted Weblate
2023-09-14 09:25:38 -07:00
Scott Shawcroft
a3d37122a7
Fix PSRAM address
2023-09-13 11:40:09 -07:00
Scott Shawcroft
f357f4a3af
Size optimize 3 more boards
2023-09-13 11:40:09 -07:00
Scott Shawcroft
99726e255d
Switch to newlib nano
2023-09-13 11:40:09 -07:00
Scott Shawcroft
18fd0045f6
More kconfig updates
2023-09-13 11:40:09 -07:00
Scott Shawcroft
0a9ae1f6ba
Code size optimizations
2023-09-13 11:40:09 -07:00
Scott Shawcroft
cb6b4d0d4a
Fix esp-camera. 32 was dropped so the path doesn't have esp32 in it.
2023-09-13 11:40:09 -07:00
Scott Shawcroft
5937f4c0c0
Hopefully finish updating kconfig
2023-09-13 11:40:09 -07:00
Scott Shawcroft
2a45d95f9d
Use correct flash defaults
2023-09-13 11:40:09 -07:00
Scott Shawcroft
4b29862d30
Clean up more s2 sdkconfig
2023-09-13 11:40:08 -07:00
Scott Shawcroft
1ab083fab7
Support target specific kconfig source
2023-09-13 11:39:51 -07:00
