Commit Graph

56 Commits

Author SHA1 Message Date
Damien George fc97d6d1b5 tools/mpy-tool.py: Raise exception if trying to freeze relocatable mpy. 2019-12-12 20:15:28 +11:00
Damien George 27879844d2 tools/mpy-tool.py: Add ability to merge multiple .mpy files into one.
Usage:

    mpy-tool.py -o merged.mpy --merge mod1.mpy mod2.mpy

The constituent .mpy files are executed sequentially when the merged file
is imported, and they all use the same global namespace.
2019-12-12 20:15:28 +11:00
Damien George 360d972c16 py/nativeglue: Add new header file with native function table typedef. 2019-12-12 20:15:28 +11:00
Damien George 7f24c29778 tools/mpy-tool.py: Support qstr linking when freezing Xtensa native mpy. 2019-11-28 13:11:51 +11:00
Damien George 36c9be6f60 tools/mpy-tool.py: Use "@progbits #" attribute for native xtensa code. 2019-11-04 15:31:42 +11:00
Damien George 23f0691fdd py/persistentcode: Make .mpy more compact with qstr directly in prelude.
Instead of encoding 4 zero bytes as placeholders for the simple_name and
source_file qstrs, and storing the qstrs after the bytecode, store the
qstrs at the location of these 4 bytes.  This saves 4 bytes per bytecode
function stored in a .mpy file (for example lcd160cr.mpy drops by 232
bytes, 4x 58 functions).  And resulting code size is slightly reduced on
ports that use this feature.
2019-10-15 16:56:27 +11:00
Damien George 9adedce42e py: Add new Xtensa-Windowed arch for native emitter.
Enabled via the configuration MICROPY_EMIT_XTENSAWIN.
2019-10-05 13:44:53 +10:00
Damien George c8c0fd4ca3 py: Rework and compress second part of bytecode prelude.
This patch compresses the second part of the bytecode prelude which
contains the source file name, function name, source-line-number mapping
and cell closure information.  This part of the prelude now begins with a
single varible length unsigned integer which encodes 2 numbers, being the
byte-size of the following 2 sections in the header: the "source info
section" and the "closure section".  After decoding this variable unsigned
integer it's possible to skip over one or both of these sections very
easily.

This scheme saves about 2 bytes for most functions compared to the original
format: one in the case that there are no closure cells, and one because
padding was eliminated.
2019-10-01 12:26:22 +10:00
Damien George b5ebfadbd6 py: Compress first part of bytecode prelude.
The start of the bytecode prelude contains 6 numbers telling the amount of
stack needed for the Python values and exceptions, and the signature of the
function.  Prior to this patch these numbers were all encoded one after the
other (2x variable unsigned integers, then 4x bytes), but using so many
bytes is unnecessary.

An entropy analysis of around 150,000 bytecode functions from the CPython
standard library showed that the optimal Shannon coding would need about
7.1 bits on average to encode these 6 numbers, compared to the existing 48
bits.

This patch attempts to get close to this optimal value by packing the 6
numbers into a single, varible-length unsigned integer via bit-wise
interleaving.  The interleaving scheme is chosen to minimise the average
number of bytes needed, and at the same time keep the scheme simple enough
so it can be implemented without too much overhead in code size or speed.
The scheme requires about 10.5 bits on average to store the 6 numbers.

As a result most functions which originally took 6 bytes to encode these 6
numbers now need only 1 byte (in 80% of cases).
2019-10-01 12:26:22 +10:00
Damien George 5716c5cf65 py/persistentcode: Bump .mpy version to 5.
The bytecode opcodes have changed (there are more, and they have been
reordered).
2019-09-26 16:39:37 +10:00
Josh Lloyd 7d58a197cf py: Rename MP_QSTR_NULL to MP_QSTRnull to avoid intern collisions.
Fixes #5140.
2019-09-26 16:04:56 +10:00
Damien George 1f7202d122 py/bc: Replace big opcode format table with simple macro. 2019-09-26 15:27:11 +10:00
Damien George 5889cf58db py/bc0: Order opcodes into groups based on their size and format. 2019-09-26 15:27:10 +10:00
Damien George c69f58e6b9 tools/mpy-tool.py: Fix freezing of non-bytecode funcs with settrace.
Only bytecode functions can be profiled at this stage.  Native functions
(eg inline assembler) may not even have a valid prelude.

Fixes issue #5075.
2019-09-06 23:55:15 +10:00
Damien George b29fae0c56 py/bc: Fix size calculation of UNWIND_JUMP opcode in mp_opcode_format.
Prior to this patch mp_opcode_format would calculate the incorrect size of
the MP_BC_UNWIND_JUMP opcode, missing the additional byte.  But, because
opcodes below 0x10 are unused and treated as bytes in the .mpy load/save
and freezing code, this bug did not show any symptoms, since nested unwind
jumps would rarely (if ever) reach a depth of 16 (so the extra byte of this
opcode would be between 0x01 and 0x0f and be correctly loaded/saved/frozen
simply as an undefined opcode).

This patch fixes this bug by correctly accounting for the additional byte.
        .
2019-09-02 13:30:16 +10:00
Damien George 4691b43c8a tools/mpy-tool.py: Add initial support for frozen with settrace. 2019-08-30 16:49:13 +10:00
Jim Mussared 4ab5156c01 tools/mpy-tool.py: Force native func alignment to halfword/word on ARM.
This is necessary for ARMV6 and V7.  Without this change, calling a frozen
native/viper function that is misaligned will crash.
2019-08-20 15:13:17 +10:00
Jun Wu b152bbddd1 py: Define EMIT_MACHINE_CODE as EMIT_NATIVE || EMIT_INLINE_ASM.
The combination MICROPY_EMIT_NATIVE || MICROPY_EMIT_INLINE_ASM is used in
many places, so define a new macro for it.
2019-06-28 13:54:45 +10:00
Damien George 9d3031cc9d tools/mpy-tool.py: Fix linking of qstr objects in native ARM Thumb code.
Previously, when linking qstr objects in native code for ARM Thumb, the
index into the machine code was being incremented by 4, not 8.  It should
be 8 to account for the size of the two machine instructions movw and movt.
This patch makes sure the index into the machine code is incremented by the
correct amount for all variations of qstr linking.

See issue #4829.
2019-06-11 11:36:39 +10:00
Damien George faf3d3e9e9 tools/mpy-tool.py: Fix linking qstrs in native code, and multiple files.
Fixes errors in the tool when 1) linking qstrs in native ARM-M code; 2)
freezing multiple files some of which use native code and some which don't.

Fixes issue #4829.
2019-06-04 22:21:01 +10:00
Damien George 74ed06828f tools/mpy-tool.py: Fix init of QStrWindow, and remove unused variable.
The qstr window size is not log-2 encoded, it's just the actual number (but
in mpy-tool.py this didn't lead to an error because the size is just used
to truncate the window so it doesn't grow arbitrarily large in memory).

Addresses issue #4635.
2019-04-08 15:24:24 +10:00
Damien George 643d2a0e86 tools/mpy-tool.py: Adjust use of super() to make it work with Python 2.
Fixes the regression introduced in ea3c80a514
2019-04-08 11:21:18 +10:00
Damien George 9a5f92ea72 py/persistentcode: Bump .mpy version to 4. 2019-03-08 15:53:05 +11:00
Damien George ea3c80a514 tools/mpy-tool.py: Add support for freezing native code.
This adds support to freeze .mpy files that contain native code blocks.
2019-03-08 15:53:05 +11:00
Damien George 636ed0ff8d py/emitglue: Remove union in mp_raw_code_t to combine bytecode & native. 2019-03-08 15:53:04 +11:00
Damien George 4f0931b21f py/persistentcode: Define static qstr set to reduce size of mpy files.
When encoded in the mpy file, if qstr <= QSTR_LAST_STATIC then store two
bytes: 0, static_qstr_id.  Otherwise encode the qstr as usual (either with
string data or a reference into the qstr window).

Reduces mpy file size by about 5%.
2019-03-05 16:32:05 +11:00
Damien George 992a6e1dea py/persistentcode: Pack qstrs directly in bytecode to reduce mpy size.
Instead of emitting two bytes in the bytecode for where the linked qstr
should be written to, it is now replaced by the actual qstr data, or a
reference into the qstr window.

Reduces mpy file size by about 10%.
2019-03-05 16:27:34 +11:00
Damien George 5996eeb48f py/persistentcode: Add a qstr window to save mpy files more efficiently.
This is an implementation of a sliding qstr window used to reduce the
number of qstrs stored in a .mpy file.  The window size is configured to 32
entries which takes a fixed 64 bytes (16-bits each) on the C stack when
loading/saving a .mpy file.  It allows to remember the most recent 32 qstrs
so they don't need to be stored again in the .mpy file.  The qstr window
uses a simple least-recently-used mechanism to discard the least recently
used qstr when the window overflows (similar to dictionary compression).
This scheme only needs a single pass to save/load the .mpy file.

Reduces mpy file size by about 25% with a window size of 32.
2019-03-05 16:25:07 +11:00
Damien George 5a2599d962 py: Replace POP_BLOCK and POP_EXCEPT opcodes with POP_EXCEPT_JUMP.
POP_BLOCK and POP_EXCEPT are now the same, and are always followed by a
JUMP.  So this optimisation reduces code size, and RAM usage of bytecode by
two bytes for each try-except handler.
2019-03-05 16:09:58 +11:00
Dave Hylands 39eef27083 tools/mpy-tool.py: Fix build error when no qstrs present in frozen mpy.
If you happen to only have a really simple frozen file that doesn't contain
any new qstrs then the generated frozen_mpy.c file contains an empty
enumeration which causes a C compile time error.
2018-12-15 14:36:08 +11:00
Damien George 814d580a15 tools/mpy-tool.py: Fix calc of opcode size for opcodes with map caching.
Following an equivalent fix to py/bc.c.  The reason the incorrect values
for the opcode constants were not previously causing a bug is because they
were never being used: these opcodes always have qstr arguments so the part
of the code that was comparing them would never be reached.

Thanks to @malinah for finding the problem and providing the initial patch.
2018-12-13 01:26:55 +11:00
Rich Barlow 6e5a40cf3c tools/mpy-tool: Set sane initial dynamic qstr pool size with frozen mods
The first dynamic qstr pool is double the size of the 'alloc' field of
the last const qstr pool. The built in const qstr pool
(mp_qstr_const_pool) has a hardcoded alloc size of 10, meaning that the
first dynamic pool is allocated space for 20 entries. The alloc size
must be less than or equal to the actual number of qstrs in the pool
(the 'len' field) to ensure that the first dynamically created qstr
triggers the creation of a new pool.

When modules are frozen a second const pool is created (generally
mp_qstr_frozen_const_pool) and linked to the built in pool. However,
this second const pool had its 'alloc' field set to the number of qstrs
in the pool. When freezing a large quantity of modules this can result
in thousands of qstrs being in the pool. This means that the first
dynamically created qstr results in a massive allocation. This commit
sets the alloc size of the frozen qstr pool to 10 or less (if the number
of qstrs in the pool is less than 10). The result of this is that the
allocation behaviour when a dynamic qstr is created is identical with an
without frozen code.

Note that there is the potential for a slight memory inefficiency if the
frozen modules have less than 10 qstrs, as the first few dynamic
allocations will have quite a large overhead, but the geometric growth
soon deals with this.
2018-08-01 18:59:31 +10:00
Damien George 44fc92ea7c tools/mpy-tool.py: Put frozen bignum digit data in ROM, not in RAM. 2018-07-09 13:43:34 +10:00
Damien George 929d10acf7 tools/mpy-tool.py: Support freezing of floats in obj representation D. 2018-07-09 12:22:40 +10:00
Damien George 9ba3de6ea1 tools/mpy-tool.py: Implement freezing of Ellipsis const object. 2017-11-15 12:46:08 +11:00
Damien George 933eab46fc py/bc: Update opcode_format_table to match the bytecode. 2017-10-10 10:37:38 +11:00
Damien George ff93fd4f50 py/persistentcode: Bump .mpy version number to version 3.
The binary and unary ops have changed bytecode encoding.
2017-10-05 10:49:44 +11:00
stijn e4ab404780 tools/mpy-tool.py: Fix missing argument in dump() function
This makes the -d commandline argument usable again.
Pass empty string as parent name as listing starts from the root.
2017-08-16 10:38:19 +02:00
Damien George b6a3289564 tools/mpy-tool.py: Don't generate const_table if it's empty. 2017-08-12 22:26:18 +10:00
Damien George 88c51c3592 tools/mpy-tool.py: Fix regression with freezing floats in obj repr C.
Regression was introduced by ec534609f6
2017-05-16 18:53:02 +10:00
Damien George ec534609f6 tools/mpy-tool.py: Use MP_ROM_xxx macros to support nanbox builds. 2017-05-13 10:08:13 +10:00
Paul Sokolovsky 473e85e2da tools/mpy-tool: Make work if run from another directory.
By making sure we don't add relative paths to sys.path.
2017-05-01 00:01:30 +03:00
Damien George dd11af209d py: Add LOAD_SUPER_METHOD bytecode to allow heap-free super meth calls.
This patch allows the following code to run without allocating on the heap:

    super().foo(...)

Before this patch such a call would allocate a super object on the heap and
then load the foo method and call it right away.  The super object is only
needed to perform the lookup of the method and not needed after that.  This
patch makes an optimisation to allocate the super object on the C stack and
discard it right after use.

Changes in code size due to this patch are:

   bare-arm: +128
    minimal: +232
   unix x64: +416
unix nanbox: +364
     stmhal: +184
    esp8266: +340
     cc3200: +128
2017-04-22 23:39:20 +10:00
Damien George 6a11048af1 py/persistentcode: Bump .mpy version due to change in bytecode. 2017-02-17 00:19:34 +11:00
Damien George 98458a46ec tools/mpy-tool.py: Add support for OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
With caching of map lookups in the bytecode, frozen bytecode can still
work but must be stored in RAM, not ROM.  This patch allows mpy-tool.py to
generate code that works with this optimisation, but it's not recommended
to use it on embedded targets (because of lack of RAM).
2017-01-05 15:52:52 +11:00
Damien George 7df9291b6c py: Update opcode format table because 3 opcodes were removed, 1 added.
LIST_APPEND, MAP_ADD and SET_ADD have been removed, and STORE_COMP has
been added in adaf0d865c.
2016-09-23 12:48:57 +10:00
Damien George c51c883cc8 tools/mpy-tool.py: Support freezing of complex numbers. 2016-09-03 00:19:02 +10:00
Damien George b6bdf18deb tools/mpy-tool.py: Compute the hash value for str/bytes objects.
This makes it more efficient at runtime to hash str/bytes objects.
2016-09-02 15:10:45 +10:00
Damien George b4790afdaf tools/mpy-tool.py: Store qstr config values in global config object.
Makes it easier to access them without passing around another dict of the
config values.
2016-09-02 15:09:21 +10:00
Damien George 72ae3c72c7 tools/mpy-tool.py: Support freezing float literals with obj-repr C.
The tool now generates code for freezing floats in obj-repr A, B or C,
with the specific representation detected at compile time using macros.
2016-08-10 13:26:11 +10:00