Dan Halbert
c149bbdcfc
Merge pull request #6447 from SimonVail/main
...
Add files via upload
2022-06-05 17:11:44 -04:00
Dan Halbert
db6d506b15
Merge pull request #6456 from dhalbert/adafruit_feather_esp32s3_4mbflash_2mbpsram
...
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-05 12:31:20 -04:00
foamyguy
67de89861e
new argument for feather s3 tft display init
2022-06-04 11:36:45 -05:00
foamyguy
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
foamyguy
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
Dan Halbert
d1cdb72020
Update ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-06-03 18:21:20 -04:00
Scott Shawcroft
be67067809
Merge remote-tracking branch 'adafruit/main' into translate_header
2022-06-03 15:18:18 -07:00
Dan Halbert
fdb133bbe8
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-02 21:09:37 -04:00
Dan Halbert
27fb96e6b0
Remove trailing whitespace
2022-06-01 21:35:01 -04:00
gamblor21
40e890323b
Add DNS optional to set IP
2022-06-01 20:13:51 -05:00
KurtE
14ab3c7375
ESP32 USE uart_param_config
...
Use this function instead of several individual configuration functions
to configure such things as Baud rate, transfer size, stop bits,
parity...
This function also resets both the RX and TX Hardware Fifo
reset functions are called to setup the hardware.
2022-06-01 17:09:44 -07:00
gamblor21
4f6d4e2284
Doc fix and add set for DNS
2022-05-31 22:13:18 -05:00
SimonVail
b2344bcde2
Update pins.c
2022-05-30 11:52:29 -04:00
SimonVail
f36dbb386b
Add files via upload
2022-05-30 11:47:51 -04:00
gamblor21
90fe20a153
Adding manual IP address set
2022-05-27 15:33:54 -05:00
Scott Shawcroft
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
Scott Shawcroft
c676253834
Switch translate() to the header file
...
This allows the compile stage to optimize most of the translate()
function away and saves a ton of space (~40k on ESP). *However*, it
requires us to wait for the qstr output before we compile the rest
of our .o files. (Only qstr.o used to wait.)
This isn't as good as the current setup with LTO though. Trinket M0
loses <1k with this setup.
So, we should probably conditionalize this along with LTO.
2022-05-27 10:33:53 -07:00
Dan Halbert
b143314b22
Espressif: fix allocation of multiple Incremental Encoders
2022-05-24 22:37:24 -04:00
Dan Halbert
99d7d0d8bb
Disable ulab for ESP32-S3 TFT
2022-05-24 14:59:34 -04:00
lady ada
e22de975b3
try just bitbangio remove
2022-05-24 11:46:03 -04:00
lady ada
9439ce04bd
try to remove some space?
2022-05-24 11:28:55 -04:00
lady ada
bb4beb3fab
add esp32s3 tft
2022-05-23 23:57:35 -04:00
Dan Halbert
64df933a83
Merge pull request #6422 from dahanzimin/main
...
Repair mixgo_ce frozen lib to frozen/
2022-05-23 15:00:42 -04:00
dahanzimin
6454c5895b
Repair import and stock in under the frozen / directory
2022-05-23 11:19:11 +08:00
Dan Halbert
6f4f7e089e
Merge pull request #6383 from dahanzimin/main
...
Add MixGo CE board
2022-05-22 08:47:53 -04:00
大汉子民
e5a5ffb9b0
Update board.c
2022-05-22 11:37:39 +08:00
dahanzimin
37e376631a
Fix format issues
2022-05-22 11:22:58 +08:00
dahanzimin
b62799a798
Add mixgo_ ce_ Serial function, repair sdkconfig
2022-05-22 10:42:56 +08:00
dahanzimin
3e47d24fb9
Update submodule and create tag
2022-05-21 10:52:14 +08:00
Dan Halbert
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
大汉子民
4356a12504
Update mpconfigboard.mk
2022-05-20 10:55:23 +08:00
大汉子民
73f2621cda
Repair No newline at end of file
2022-05-20 10:38:14 +08:00
大汉子民
525262cd9a
Merge branch 'main' into main
2022-05-20 10:04:02 +08:00
dahanzimin
e3896be345
Modify mixgoce_ Lib is a submodule
2022-05-20 09:46:55 +08:00
Dan Halbert
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
Tod Kurt
d2d08fc944
fix SPI pin names qtpy esp32s3
2022-05-13 16:48:13 -07:00
Dan Halbert
64ca3aa359
Merge pull request #6387 from SimonVail/main
...
Lilygo TTGO T-OI Plus ESP32C3
2022-05-13 18:31:50 -04:00
SimonVail
1f0bdad083
Update ports/espressif/boards/lilygo_ttgo_t-oi-plus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-05-13 15:02:26 -04:00
Scott Shawcroft
3e85cfe26b
Fix ESP and HCI build
2022-05-12 15:23:26 -07:00
SimonVail
ef4d298ca8
Update pins.c
2022-05-12 17:49:48 -04:00
SimonVail
0d92b0a155
Update board.c
2022-05-12 17:46:49 -04:00
SimonVail
b1935975a2
Update board.c
2022-05-12 17:27:48 -04:00
Scott Shawcroft
269d51d023
Add two stage reset for BLE
...
This lets the BLE stack run through the wait period after a VM run
when it may be waiting for more writes due to an auto-reload.
User BLE functionality will have their events stopped. Scanning and
advertising is also stopped.
2022-05-12 13:20:44 -07:00
SimonVail
c5db1280ee
Update mpconfigboard.mk
2022-05-12 13:21:58 -04:00
SimonVail
6bdd128fb3
Add files via upload
2022-05-12 13:18:39 -04:00
SimonVail
f69a293795
Create sdkconfig
2022-05-12 13:18:17 -04:00
SimonVail
a4f505dcab
Delete ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3 directory
2022-05-12 13:17:17 -04:00
SimonVail
0b586e9c94
Update board.c
2022-05-12 12:43:52 -04:00
SimonVail
6fe728a9d2
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/pins.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:59 -04:00
SimonVail
6908f5a97e
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/board.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:52 -04:00
SimonVail
b6e6ee7505
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/mpconfigboard.mk
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:44 -04:00
SimonVail
b9ea7458ab
Add files via upload
2022-05-12 11:41:53 -04:00
SimonVail
35d78c135a
Create sdkconfig
2022-05-12 11:41:29 -04:00
SimonVail
f86ebe71b6
Delete Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:40:16 -04:00
SimonVail
0d1740ad27
Create Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:39:39 -04:00
大汉子民
d4b02e22ae
Thank you. I have applied for PID in espressif
2022-05-12 09:38:13 +08:00
Kong Wai Weng
b9c28742be
Added newline at the end of the file.
2022-05-11 15:30:45 +08:00
Kong Wai Weng
466f2a3644
Updated copyright information.
2022-05-11 15:25:32 +08:00
Kong Wai Weng
142ed2a024
Added Maker Feather AIoT S3.
2022-05-11 15:18:31 +08:00
dahanzimin
d48f961d0a
Add MixGo CE board
2022-05-10 18:56:13 +08:00
Dan Halbert
8b026a2c38
apply i2c delay fix from adafruit/esp-idf
2022-05-08 09:49:18 -04:00
Dan Halbert
30904a8638
Merge pull request #6354 from dhalbert/espressif-dio-fixes
...
espressif: check properly for pull values
2022-05-05 22:44:29 -04:00
Dan Halbert
0f3eb9f46e
espressif: check properly for pull values
2022-05-04 22:51:27 -04:00
billvanleeuwen424
76040a9380
removed duplicate include per issue 6278
2022-05-04 14:57:37 -04:00
Tod Kurt
7e622c3ff7
mpconfigboard.h also needs neopixel tweak
2022-05-02 13:23:55 -07:00
Tod Kurt
5d4e964de0
fix qtpy_esp32s3_nopsram neopixel pins
2022-05-02 13:04:05 -07:00
Michael Wisslead
e63a327107
Bound PulseIn start indexes to maxlen.
2022-04-28 02:28:34 +00:00
Dan Halbert
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
Neradoc
17bba7b17d
remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now
2022-04-19 06:49:11 +02:00
Dan Halbert
c3cfbc1259
Force pin 21 high; patch; need to diagnose further
2022-04-09 22:03:16 -04:00
Dan Halbert
d5deddcaf5
Merge pull request #6207 from domdfcoding/esp32-rotaryio
...
Add espressif rotaryio divisor support.
2022-04-06 21:35:02 -04:00
Dominic Davis-Foster
f297e872d6
Account for divisor when overriding position.
2022-04-06 18:13:59 +01:00
Dan Halbert
99dc4029dc
Espressif: disable pull-up on AnalogIn creation
2022-04-06 11:33:56 -04:00
root
b993313ac1
Don't reset GPIO4 (used for voltage monitoring)
2022-04-05 11:30:12 -05:00
Tod Kurt
390a473dda
add board.DISPLAY since display already set up by CirPy
2022-04-01 15:08:43 -07:00
Dominic Davis-Foster
319ca8560c
Always configure the second PCNT channel.
2022-03-31 20:00:34 +01:00
Dan Halbert
ec5c9507b9
Merge pull request #6187 from prplz/espressif-uart-workflow-fixes
...
Espressif: Fix interrupts in UART workflow
2022-03-30 21:18:02 -04:00
Dan Halbert
6fd968fc12
Merge pull request #6199 from erongd/muselab-wrover-spiram-fix
...
enable SPIRAM support on muselab nanoESP32S2 board
2022-03-30 21:14:59 -04:00
Dominic Davis-Foster
6d025a239e
Add espressif rotaryio divisor support.
2022-03-28 09:04:02 +01:00
Michael Himing
f96cd7361d
Fix esp32s2 build
2022-03-27 10:09:23 +11:00
Jeff Epler
dd73182441
Merge pull request #6190 from tannewt/esp32s3_usb_devkit
...
Add ESP32-S3-USB-OTG board
2022-03-26 15:05:30 -05:00
Jeff Epler
35aa32bec0
Merge pull request #6193 from tannewt/fix_empty_mdns
...
Fix MDNS crash on S2
2022-03-26 15:05:17 -05:00
Michael Himing
686012426d
Espressif: Fix interrupts in UART workflow
2022-03-25 16:20:04 +11:00
Eric Rong
7ad6fa8df5
enable SPIRAM support on muselab nanoESP32S2 board
2022-03-24 16:46:13 -07:00
Scott Shawcroft
8642dc4aa7
Fix MDNS crash on S2
...
Fixes #6186
2022-03-23 17:17:48 -07:00
Scott Shawcroft
380a7087d4
Fix 3-wire SPI on ESP
...
Simplifying the checks fixed it.
Fixes #6141
2022-03-23 14:53:46 -07:00
Scott Shawcroft
e13d32b832
Add ESP32-S3-USB-OTG board
...
This board has both types of USB connectors, a display and buttons
to select items on the display. It also has a micro-B connector for
the UART output.
2022-03-23 14:10:26 -07:00
Scott Shawcroft
ee4c501936
Merge remote-tracking branch 'adafruit/main' into c3_serial_jtag
2022-03-23 12:17:02 -07:00
Scott Shawcroft
f5d90fc84f
Switch to port_serial_* hooks
...
This makes it easier to integrate port specific serial alongside
the common approaches.
2022-03-22 19:40:33 -07:00
Scott Shawcroft
110857c12e
Actually turn on serial over Serial/JTAG for QTPy
2022-03-22 11:45:47 -07:00
Scott Shawcroft
b8d1bb1d5d
Shrink C3 builds
2022-03-22 10:46:57 -07:00
Scott Shawcroft
4363361c87
Board definition clean up
...
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
Scott Shawcroft
623b6fad16
Fix nested categories in update_sdkconfig.py
...
Also, mark QTPy C3 as BIN only.
2022-03-21 17:04:19 -07:00
Scott Shawcroft
6dd9db31b3
Add USB to Serial/JTAG support for REPL
...
Adds Adafruit QT Py C3 board that uses it. Also revamps size
check script to work for S3 and C3 as well.
Fixes #6030
2022-03-21 14:03:57 -07:00
Jeff Epler
4465adfe01
Merge pull request #6175 from tannewt/mdns
...
Add mdns module
2022-03-21 15:55:03 -05:00
Scott Shawcroft
92d946fcac
Guard against NULL result
2022-03-21 10:15:46 -07:00
lady ada
fdf27eee12
add feather esp32-s3 8mb flash, 0 psram
2022-03-19 23:04:20 -04:00
Scott Shawcroft
6f0d62d85e
Formatting and shrink build size on C3
2022-03-18 12:05:54 -07:00
Jeff Epler
e9d81c2826
Add mdns module
...
This allows for CircuitPython to resolve a .local domain and find
other devices with MDNS services.
First step for #6174
2022-03-17 18:16:16 -07:00
Michael Himing
da92d508c2
lilygo_ttgo_t-01c3: Add creation ID
2022-03-17 19:21:34 +11:00
Michael Himing
de168b106c
Add board lilygo_ttgo_t-01c3
2022-03-17 17:24:24 +11:00
Dan Halbert
af9f80daeb
Merge pull request #6144 from tannewt/back_to_idf4.4
...
Update ESP-IDF to fix PinAlarm
2022-03-15 17:10:42 -04:00
Dan Halbert
f13d218749
Merge pull request #6125 from tannewt/usb_host
...
Start of USB host API
2022-03-11 21:41:28 -05:00
Scott Shawcroft
96dd11a198
Update ESP-IDF to fix PinAlarm
...
Fixes #5973
2022-03-11 14:40:49 -08:00
Dan Halbert
862210b3fb
Merge pull request #6135 from CircuitART/main
...
merge hexky_s2 board
2022-03-11 07:48:54 -05:00
CircuitART
43bd2c41e0
Update pins.c
2022-03-11 13:27:08 +08:00
CircuitART
597430ef96
Update pins.c
2022-03-11 12:26:49 +08:00
CircuitART
016bc00f01
Update pins.c
...
fixed
2022-03-11 11:54:32 +08:00
Scott Shawcroft
c9ec5c89b6
Fix ESP32-S3 box display color order
2022-03-10 15:50:07 -08:00
CircuitART
4bfe9e53df
merge hexky_s2 board
...
Hello, please add support to my custom esp32-s2 board.
thanks
2022-03-10 13:27:14 +08:00
Dan Halbert
442026548f
Merge pull request #6084 from fabaff/lilygo-ttgo-esp32-s2
...
Add support for LILYGO TTGO T8 ESP32-S2-WROOM
2022-03-08 21:00:44 -05:00
Fabian Affolter
0a72420dcb
Add support for LILYGO TTGO T8 ESP32-S2-WROOM
2022-03-08 20:07:37 +01:00
Fabian Affolter
1b1b363515
Add support for LILYGO TTGO T8 ESP32-S2
2022-03-08 19:56:41 +01:00
Dan Halbert
1c8f671f0a
Merge pull request #6118 from pewpew-game/parallel-reset-optional
...
paralleldisplay: reset and read pins should be optional
2022-03-08 09:34:25 -05:00
Michael Himing
bc1dade304
Espressif: Fix i2c pullup detection
2022-03-08 16:39:24 +11:00
Scott Shawcroft
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
Radomir Dopieralski
b5ad78715c
Update ports/espressif/common-hal/paralleldisplay/ParallelBus.h
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-05 21:48:00 +01:00
Radomir Dopieralski
f477848ac1
paralleldisplay: reset and read pins should be optional
...
The ``reset`` and ``read`` pins should be optional, but the espressif
code had several places where it assumed they are not, and a bug that
caused a crash on ``release_displays`` if they were made optional.
The bug was caused by the fields for storing pin numbers being set
to ``NO_PIN``, which has value of -1, while the fields have type
``uint8_t``. That set the actual value to 255, and a subsequent
comparison to ``NO_PIN`` returned false.
2022-03-05 18:54:12 +01:00
Dan Halbert
90c5fb2515
Update ports/espressif/boards/adafruit_feather_esp32s2/pins.c
2022-03-01 19:56:23 -05:00
lady ada
ee52795540
fix automatic i2c enablement with rev C
2022-03-01 18:15:37 -05:00
foamyguy
2f57800ffd
update nina-fw submodule
2022-02-27 16:15:57 -06:00
lady ada
a9d87e6e8b
fix missing pins, speed up
2022-02-25 20:30:35 -05:00
Scott Shawcroft
e2f56e9031
Merge pull request #6065 from prplz/ai-thinker-esp32c3s-changes
...
ai_thinker_esp32-c3s: Pull LEDs down on reset
2022-02-22 10:53:50 -08:00
Scott Shawcroft
85b53eab0a
Merge pull request #5963 from arturo182/esp32-s3-devkitm-1
...
espressif: Add ESP32-S3-DevKitM-1 board support
2022-02-22 10:48:07 -08:00
Michael Himing
dbedb1575e
ai_thinker_esp32-c3s: Pull LEDs down on reset
2022-02-19 14:30:51 +11:00
arturo182
e57e4bd667
esp32s3: Rename to devkitm_1 to devkitm_1_n8 to make more future-proof
2022-02-18 21:32:36 +01:00
Dan Halbert
57bbe7922d
Merge pull request #6058 from Neradoc/add-hiibot-iots2
...
Add hiibot iots2
2022-02-18 12:18:25 -05:00
Dan Halbert
1c3e03d1b1
Merge pull request #6057 from tannewt/board_pin_reset
...
Allow ESP boards to customize how a pin is reset
2022-02-17 21:12:11 -05:00
Dan Halbert
60ceb6e367
Merge pull request #6043 from makermelissa/main
...
Add PortalBase and Fake Requests and update Frozen Libs on Portal boards
2022-02-17 20:19:33 -05:00
Scott Shawcroft
5a51aa2a75
Merge pull request #6056 from Neradoc/qtpys2-debug-uart
...
free RX and TX on QTPY-ESP32S2 in non debug builds
2022-02-17 17:02:46 -08:00
Scott Shawcroft
c4fb5f7df1
Allow ESP boards to customize how a pin is reset
...
This allows board code to override the default pull up reset state.
It is useful for pins that are already externally connected, pulled
or otherwise used by the board.
Fixes #5931
2022-02-17 16:32:29 -08:00
Neradoc
3acb0d48bc
free RX and TX on QTPY-ESP32S2 in non debug builds
2022-02-18 01:13:37 +01:00
Dan Halbert
fe6e03f504
Merge pull request #6013 from tannewt/esp_ble_gatt_client
...
Add S3 GATT client support
2022-02-17 16:02:11 -05:00
Neradoc
aedae120c7
use espressif assigned PID for Hiibot IOTS2
2022-02-17 15:06:38 +01:00
Neradoc
139c2710aa
rebase, fix call to common_hal_busio_spi_construct
2022-02-17 14:41:47 +01:00
Neradoc
b1a55e3904
add board.DISPLAY and init to hiibot itos2 (copying from TTGO)
2022-02-17 14:41:47 +01:00
Neradoc
f9f711ab96
now it compiles, so there is that
2022-02-17 14:41:47 +01:00
Neradoc
727dd41a8c
add hiibot itos2, original commit before checking
2022-02-17 14:41:47 +01:00
Scott Shawcroft
ab037bd216
Merge pull request #6046 from prplz/espressif-enter-repl-delayed-fix
...
Fix press any key responding slowly on espressif
2022-02-16 21:58:29 -08:00
Michael Himing
bfb897a0b8
Fix press any key responding slowly on espressif
2022-02-17 12:57:27 +11:00
Kattni Rembor
c9213481b3
Update pin name to match TFT pins.
2022-02-16 16:32:08 -05:00
Melissa LeBlanc-Williams
726bf02ea8
Add PortalBase and Fake Requests and update Frozen Libs on Portal boards
2022-02-16 10:12:54 -08:00
Scott Shawcroft
11647f56e4
Merge pull request #6034 from tannewt/i2c_power
...
Tweak I2C and TFT power pin defaults
2022-02-15 18:00:34 -08:00
Scott Shawcroft
65af10cd23
Tweak I2C and TFT power pin defaults
...
This should set the power to on by default without preventing the
user code from repeatedly using it.
Fixes #5903
2022-02-14 16:19:56 -08:00
Michael Himing
11bbe48ede
Espressif: add partitions-4MB-no-uf2
2022-02-15 08:42:15 +11:00
Michael Himing
ca5095c94b
Add AI thinker esp32c3s 2M
2022-02-15 07:00:38 +11:00
Scott Shawcroft
d4c2ffea27
Merge pull request #6022 from anecdata/more_ap_connections
...
wifi.radio.start_ap() new kwarg: max_connections
2022-02-14 10:08:39 -08:00
anecdata
5742a12497
input validation consistent with esp-idf is moved to common-hal
2022-02-13 22:14:45 -06:00
anecdata
b559a0ee2a
new kwarg: wifi.radio.start_ap(max_connections=)
2022-02-12 13:34:57 -06:00
anecdata
e4837a4a61
ESP32-S3 increase max sockets - issue #5915 (partial)
2022-02-11 16:00:45 -06:00
