d6e657b593
Initial commit.
2020-01-14 16:51:27 -05:00
eb481c9247
add support for the Open Book
2020-01-14 16:34:46 -05:00
50e718be99
second revision to line breaks for visibility per dhalbert
2020-01-13 22:13:39 -05:00
18957786f2
inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert
2020-01-13 22:00:42 -05:00
c735289ddf
Added Dxx names to analog pins on Feather M4 Express pins.c file
2020-01-13 21:19:17 -05:00
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2
...
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
2020-01-07 12:08:59 -08:00
59ded1131f
Take display offsets for PewPew M4 from the bootloader config
...
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
2020-01-06 14:24:30 +01:00
3ad3d49959
changes only for monster m4sk
2020-01-04 12:32:49 -05:00
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update
...
Update the PewPew M4 board and circuitpython-stage
2020-01-01 13:59:02 -05:00
0223589e6c
Fix default UART too
2019-12-30 11:34:51 -08:00
e1d026f815
Update pins.c
2019-12-30 11:33:04 -08:00
b06057395b
Update PewPew M4
...
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
2019-12-23 18:37:36 +01:00
f60b6481e0
Turn off `gamepad` on cpx crickit
2019-12-20 12:14:27 -08:00
b859e2b710
Remove `re` from CPX Displayio build to make space.
2019-12-20 11:43:56 -08:00
d31a387ace
circuitplayground_express_displayio: reduce inlining to make .ko translation fit
2019-12-19 16:11:29 -06:00
16688180c6
add-ndbit6
2019-12-19 07:17:43 -07:00
81581b345c
Increase CPX stack size slightly
2019-12-16 17:25:22 -05:00
89ed64157d
Merge branch 'master' into master
2019-12-16 13:25:44 +05:00
87dc9bee8b
Update mpconfigboard.mk
2019-12-16 12:25:51 +05:00
6f6d6c01ab
Update mpconfigboard.mk
2019-12-16 12:18:16 +05:00
d9ca4c9a60
fix build failures
2019-12-10 22:39:44 -05:00
c6221c5956
Remove no-longer-used nrf and atmel-samd .ld files
2019-12-10 21:22:17 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
013c840862
working on all ports
2019-12-10 20:27:30 -05:00
a08d9e6d8e
audiocore: Add MP3File using Adafruit_MP3 library
2019-12-10 14:03:06 -06:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
002f5c0f1c
samd: trinket_m0: make board fit again
2019-12-02 08:25:48 -06:00
899202aca7
Merge branch 'master' into gcc9
2019-12-02 07:27:03 -06:00
d843156a5e
samd: Consolidate small build optimization flags
...
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
2019-11-29 10:51:16 -06:00
dd6dfeb30a
Squeeze pyruler zh_Latn_pinyin
2019-11-27 14:47:35 -05:00
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master
...
Add shIRtty board
2019-11-26 15:23:56 -05:00
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name
...
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 15:17:14 -05:00
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 10:59:12 -08:00
2647ea0754
fix: disable touchio to save some space
2019-11-26 19:26:18 +01:00
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space
...
Once we use PixelBuf, the library will be much smaller.
2019-11-26 09:31:44 -08:00
82f55dc046
atmel-samd: reduce inlining on constrained boards again
...
pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0
now has just 76 bytes flash available.
2019-11-26 08:50:55 -06:00
3ed6de7baf
atmel-samd: reduce inlining on pyruler again
...
By tweaking the optimizer flags further, this build also fits
2019-11-26 08:50:55 -06:00
2e4a6b94e7
atmel-samd: get most constrained m0 builds to work again
...
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
2019-11-26 08:50:45 -06:00
11dc572bce
feature: our own PID - thanks @ladyada
2019-11-25 21:56:42 +01:00
fc71ed9789
add shirtty board - hackaday supercon 2019 addon
2019-11-25 17:44:41 +01:00
13375d16f1
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk
2019-11-22 15:44:51 -05:00
e18d3e0f76
Merge branch 'master' into m4-network-ps2io
2019-11-22 15:02:52 -05:00
1a62a9cb17
remove network from kicksat_sprite
2019-11-22 14:02:44 -05:00
2e9aa38700
turn off network in pewpew_m4
2019-11-22 13:49:33 -05:00
1d411d2874
Merge remote-tracking branch 'adafruit/master' into testing-fixes
2019-11-22 11:55:34 -05:00
228a619af5
enable network, wiznet5k, and ps2io by default on M4
2019-11-22 10:59:27 -05:00
fce7b89087
removed Robo HAT MM1 M0 board.
2019-11-20 21:34:24 +11:00
b3d7467719
add-ndbit6
2019-11-19 14:52:09 -07:00
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
8134ceec83
Update pins.c
2019-11-14 23:16:55 +05:00
799770926b
Update pins.c
2019-11-14 18:51:01 +05:00
949f87fd25
Update pins.c
2019-11-14 18:50:26 +05:00
3db7f2798f
updated
2019-11-14 16:34:08 +05:00
d745c1023e
Support for XinaBox CC03 and CS11
...
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface.
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
2019-11-12 12:48:31 +02:00
c7195c4bc5
Allow boards to enable the `micropython.native` decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
1505da784f
wip
2019-10-28 18:15:02 -04:00
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
dalegrover
Joey Castillo
scs217
Scott Shawcroft
Radomir Dopieralski
Marius-450
Dan Halbert
Scott Shawcroft
Jeff Epler
ndgarage
Dan Halbert
KalbeAbbas
Jeff Epler
Thea Flowers
Thomas Sarlandie
wallarug
Cedar Grove Maker Studios
KalbeAbbas
☒ Bjarke Gotfredsen
brentru
ladyada
ProductDev
Chris Osterwood
arturo182
Melissa LeBlanc-Williams
Kattni Rembor