Commit Graph

476 Commits

Author SHA1 Message Date
BennyE
210c0ec89c add country(code) to wifi network objects) 2020-12-13 13:32:12 +01:00
microDev
37ee5e683d
Merge branch 'main' into ota-s2 2020-12-12 05:25:46 +05:30
BennyE
c5c13620f2 Fix for issue 3663 by returning early if no scan was started before stop is issued 2020-12-12 00:49:53 +01:00
BennyE
81c4871fdf Set DEBUG CFLAG if set in make 2020-12-11 22:11:39 +01:00
BennyE
e3194ad54e Reserve UART pins only if DEBUG=1 is set to address issue 3811 2020-12-11 20:35:28 +01:00
Dan Halbert
cf938983e9 SleepMemory + set alarm.wake_alarm 2020-12-11 08:10:26 -05:00
microDev
cb35abfd04
add docs, update translation & fix ota.flash() 2020-12-11 01:01:01 +05:30
Dan Halbert
55f4110983 fix typo 2020-12-10 14:16:25 -05:00
Dan Halbert
5964163649 Initial SleepMemory code 2020-12-10 13:03:40 -05:00
microDev
6a4f74946f
reset ota module on every vm run 2020-12-10 16:48:58 +05:30
microDev
07015ad527
add ability to switch boot partition 2020-12-10 16:42:45 +05:30
microDev
bfa2c604ef
add ability to flash in discontinuous chunks 2020-12-10 15:45:25 +05:30
microDev
ed5add37f6
add ability to flash in continuous chunks 2020-12-10 14:36:49 +05:30
microDev
dee86a014b
factor out esp_ota_end 2020-12-10 14:04:24 +05:30
microDev
20c3184c87
re-organize and clean-up 2020-12-10 12:34:56 +05:30
Scott Shawcroft
e14b148e62
Merge pull request #3803 from skieast/fix_i2c_hang_with_wifi
Working, tested with two i2c busses
2020-12-09 10:03:31 -08:00
Scott Shawcroft
133013083a
Merge pull request #3808 from tannewt/panic_safe_mode
Enter safe mode after panic or brownout
2020-12-08 16:31:22 -08:00
Scott Shawcroft
57101d7da6
Merge pull request #3807 from tannewt/sleep_tweaks
Add `board_deinit` for use with sleep
2020-12-08 16:30:41 -08:00
Lucian Copeland
9a5006e241 Remove problematic calloc 2020-12-08 17:43:39 -05:00
Scott Shawcroft
0b4bcd9599
Fix build and more comments 2020-12-08 13:05:21 -08:00
Scott Shawcroft
d0a806d797
Enter safe mode after panic or brownout
Uses the IDF's reset reason. Does nothing before reset.

Fixes #3389
2020-12-08 11:03:24 -08:00
Scott Shawcroft
40118bcf57
Add board_deinit for use with sleep
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
2020-12-08 10:52:25 -08:00
microDev
2f95c94ad8
esp32s2 - update common_hal_mcu_reset 2020-12-08 18:00:58 +05:30
microDev
602243748b
add ota support for esp32s2 2020-12-08 11:45:00 +05:30
microDev
fc23a0cc8a
implement ota module 2020-12-08 11:30:00 +05:30
Bruce Segal
571c063c2a Working, tested with two i2c busses 2020-12-07 17:57:54 -08:00
Scott Shawcroft
44b56f76c4
Store safe mode state in the RTC.
Also print backtrace before reset when DEBUG. This will help debug
safe mode issues which calls reset.
2020-12-07 16:39:54 -08:00
Scott Shawcroft
22ad76bb48
Merge pull request #3800 from BennyE/wifi-better-logs
Enhance debug log for wifi scan, sta_start, sta_stop
2020-12-07 12:32:15 -08:00
Lucian Copeland
c1a2ea27ce Change to config-based resets 2020-12-07 13:57:47 -05:00
Lucian Copeland
c7b5928833 Fix submodule desync 2020-12-07 11:47:39 -05:00
Lucian Copeland
40a536904f Merge remote-tracking branch 'upstream/main' into esp32-pin-reset 2020-12-07 11:45:27 -05:00
Dan Halbert
169b487509 Include wifi.radio singleton in gc 2020-12-07 11:07:56 -05:00
BennyE
70827ac3da debug log for wifi scan, start stop 2020-12-06 23:38:04 +01:00
Dan Halbert
348392f8cc
Merge pull request #3775 from tannewt/nina_certs
Use nina-fw root certs
2020-12-02 16:13:19 -05:00
Dan Halbert
9b3186b625
Merge pull request #3776 from tannewt/backup_socket_timeout
Two minor socket changes
2020-12-02 16:12:29 -05:00
Dan Halbert
31acfedf93
Merge pull request #3780 from tannewt/block_while_erasing
Block all tasks (not interrupts) during flash erase
2020-12-02 16:10:25 -05:00
Scott Shawcroft
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
Scott Shawcroft
73e22f9eeb
Block all tasks (not interrupts) during flash erase
Otherwise we risk running code from flash while an erase is in
progress, crashing and corrupting the file system.

Related to #3744
2020-12-01 18:15:06 -08:00
Dan Halbert
8b7c23c1ee address review comments 2020-12-01 20:01:14 -05:00
Scott Shawcroft
927624468d
Two minor socket changes
* Remove BrokenPipeError and prefer to return the number of bytes
  received. (May be zero.)
* Add two minute backup timeout to reduce the chance we hang on
  recv accidentally.
2020-11-30 18:39:50 -08:00
Scott Shawcroft
4ac4faaaf6
Use nina-fw root certs
That way we have one set we use for all of Adafruit's connected
devices.
2020-11-30 17:02:26 -08:00
Scott Shawcroft
5b3c930e38
Merge pull request #3738 from microDev1/fix-touch
ESP32S2: Fix multiple touchpad don't work simultaneously
2020-11-30 16:03:16 -08:00
Christian Walther
c7404a3ff8 Add movable allocation system.
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.

By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
Dan Halbert
596e0e4bd2 merge from upstream 2020-11-27 16:06:57 -05:00
Dan Halbert
e308a9ec11 working! PinAlarm not implemented yet. 2020-11-27 16:03:37 -05:00
Dan Halbert
104a089677 deep sleep working; deep sleep delay when connected 2020-11-26 22:06:37 -05:00
microDev
e90cb3ad86
Merge branch 'main' into fix-touch 2020-11-26 11:33:45 +05:30
microDev
6af48bb24c
reset touchin on every vm run 2020-11-26 11:22:44 +05:30
Jeff Epler
7923aa0a62
Merge pull request #3708 from hierophect/esp32s2-udp
ESP32-S2: Add UDP with recvfrom_into and sendto
2020-11-25 21:11:20 -06:00
Jeff Epler
6fd123a5c4
Merge pull request #3758 from tannewt/update_connect_doc
Update wifi.Radio.connect doc
2020-11-25 21:09:56 -06:00
Scott Shawcroft
abff2615cb
Merge pull request #3754 from hierophect/esp-spi-pinclaim
ESP32S2: fix pin claiming bugs
2020-11-25 15:11:29 -08:00
Dan Halbert
ef0830bfe2 merge from upstream + wip 2020-11-25 17:52:06 -05:00
Dan Halbert
9dbea36eac changed alarm.time API 2020-11-25 15:09:27 -05:00
Lucian Copeland
a854da35d3 Fix masking issue causing pin claim problems 2020-11-25 12:14:56 -05:00
Lucian Copeland
c9bc877683 Merge remote-tracking branch 'upstream/main' into esp-spi-pinclaim 2020-11-25 10:43:35 -05:00
Scott Shawcroft
9a692c3222
Exit faster on recv when TLS connection closed
When a TLS connection is closed by the server it usually sends a
notice. We see this incoming byte with lwip_ioctl and try to read
it. The read returns 0 but we keep trying anyway. Now, we quit
trying when we get zero back. If the connection was still alive
it'd either read a byte or delay until a byte could be read.
2020-11-24 18:14:22 -08:00
Scott Shawcroft
4ac11c8d31
Update wifi.Radio.connect doc
Now it includes bssid info.
2020-11-24 17:54:39 -08:00
hierophect
510f464234
Merge branch 'main' into esp32s2-udp 2020-11-24 18:28:10 -05:00
Scott Shawcroft
669f17e5bf
Merge pull request #3678 from microDev1/nvm-s2
ESP32S2: Support for NVM
2020-11-24 14:45:35 -08:00
Lucian Copeland
59458a9013 Add pin claiming to SPI construct 2020-11-24 16:46:11 -05:00
hierophect
d0e75e635a
Merge pull request #3714 from microDev1/ps2io-S2
ESP32S2: Support for PS/2-IO
2020-11-24 14:56:09 -05:00
Lucian Copeland
0c5e0954db Add closed socket identification 2020-11-24 14:51:06 -05:00
Lucian Copeland
1031fe2992 correct submodule 2020-11-24 14:46:43 -05:00
Jeff Epler
0836abba41
Merge pull request #3720 from tannewt/more_wifi_retry
Retry connection when getting NOT_AUTHED
2020-11-24 09:54:54 -06:00
microDev
bbe13490b5
Merge branch 'main' into nvm-s2 2020-11-24 12:24:48 +05:30
microDev
6ff24410eb
use values pointer directly 2020-11-24 11:44:11 +05:30
microDev
9dd1783da5
Merge branch 'main' into ps2io-S2 2020-11-24 11:11:11 +05:30
Dan Halbert
7a45afc549 working, but need to avoid deep sleeping too fast before USB ready 2020-11-23 22:44:53 -05:00
Dan Halbert
ebdc48ae22
Merge pull request #3745 from kattni/magtag-pin-update
Add pin names from silk
2020-11-23 19:48:12 -05:00
Lucian Copeland
1c9f33a372 Replace reset with mux change 2020-11-23 19:01:30 -05:00
Lucian Copeland
86694262b8 Merge remote-tracking branch 'upstream/main' into esp32-pin-reset 2020-11-23 18:58:46 -05:00
Lucian Copeland
8ffd973e22 Merge remote-tracking branch 'upstream/main' into esp32s2-udp 2020-11-23 18:40:14 -05:00
Scott Shawcroft
a80bf22211
Merge pull request #3727 from BennyE/wifi-full-scan
esp32s2: Do a full scan when channel/BSSID are not given
2020-11-23 15:19:57 -08:00
Scott Shawcroft
c67f5892ff
Merge pull request #3704 from microDev1/frequencyio-S2
ESP32S2: Support for FrequencyIO
2020-11-23 14:59:27 -08:00
Kattni Rembor
7928a0d454 Blank lines to group aliases. 2020-11-23 16:02:45 -05:00
Kattni Rembor
3730862362 Update to match silk rev 1 2020-11-23 15:56:36 -05:00
Kattni Rembor
efda912437 Add pin names from silk 2020-11-23 15:53:28 -05:00
Dan Halbert
3abee9b256 compiles; maybe ready to test, or almost 2020-11-22 21:52:37 -05:00
Dan Halbert
25591a3f8a Merge branch 'esp32s2-common-hal-mcu-delay-us' into sleep 2020-11-22 21:01:49 -05:00
Dan Halbert
a0f1ec3c4a wip 2020-11-22 19:10:09 -05:00
Dan Halbert
f62ea25331 ESP32S2: common_hal_mcu_delay_us() now calls mp_hal_delay_us() 2020-11-22 19:08:27 -05:00
microDev
f3b5ca5f01
replace goto with conditional break 2020-11-22 19:20:21 +05:30
microDev
048ca2a570
get multiple touchpad working 2020-11-22 18:54:18 +05:30
Dan Halbert
75559f35cc wip: ResetReason to microcontroller.cpu 2020-11-21 23:29:52 -05:00
Dan Halbert
e4c66990e2 compiles 2020-11-20 23:33:39 -05:00
BennyE
2773f534c9
Update ports/esp32s2/common-hal/wifi/Radio.c
adding suggested changes
2020-11-20 09:40:32 +01:00
BennyE
6760cdf678 Let connect() choose strongest AP if channel and BSSID are not given 2020-11-20 00:11:17 +01:00
Dan Halbert
39e1f52e28 wip; not compiling yet 2020-11-19 17:47:12 -05:00
BennyE
17a8bafe05 Choose best AP in range if no channel/bssid given 2020-11-19 23:39:48 +01:00
Dan Halbert
649c930536 wip 2020-11-19 15:43:39 -05:00
microDev
a25b27520d
update nvm implementation 2020-11-20 00:22:00 +05:30
microDev
bc9036f353
use pointer to get nvs handle 2020-11-20 00:15:30 +05:30
Jeff Epler
dd108b755d esp32s2: initialize event loop ane netif only once
deinitting these seems to cause problems.
2020-11-19 11:36:02 -06:00
microDev
040eaa0443
re-organize and clean-up 2020-11-19 15:30:15 +05:30
microDev
b56645808c
fix crash on user code exit 2020-11-19 11:44:22 +05:30
Dan Halbert
5bb3c321e9 merge from main 2020-11-19 00:29:14 -05:00
Dan Halbert
682054a216 WIP: redo API; not compiled yet 2020-11-19 00:23:27 -05:00
Scott Shawcroft
081aec4429
Retry connection when getting NOT_AUTHED
I saw it once with a correct password. Retrying may still fail
but at least it'll try first.
2020-11-18 16:39:34 -08:00
Jeff Epler
83d790ad8f esp32s2: don't delete the event loop
.. it seems to make the esp-idf grumpy.
2020-11-18 17:45:42 -06:00
microDev
0d3e81f969
update interrupt handling 2020-11-18 22:22:42 +05:30