34c4cc1bd9
samd: Rename dma_{allocate,free} channel
...
These are now used in the (video) parallel capture device as well.
2021-04-23 09:46:33 -05:00
64e0958916
wip: descriptor building
2021-04-21 23:25:36 -04:00
0e2431048d
Fix PWMOut on SAMD21
2021-04-20 15:21:05 -05:00
46c9b1bc37
atmel-sam: Use DMA for ParallelImageCapture
...
This allows ctrl-c to interrupt the capture, and ensures we handle
interrupts & background tasks.
2021-04-20 13:52:44 -05:00
d50feebd2c
atmel-sam: Factor out find_sync_event_channel_raise
2021-04-20 13:33:11 -05:00
4dcbdac97e
Complete the 'horizontal_reference' rename
2021-04-20 11:33:32 -05:00
5c5736ee1e
atmel-sam: Allow PWM to go up to cpu_frequency/2
...
24MHz is the nominal external clock to use with OV7670. (My testing
was actually at 16MHz)
2021-04-20 10:22:21 -05:00
99799cded6
imagecapture: implement to review suggestions
2021-04-20 10:21:32 -05:00
2198b1a4df
Update mpconfigboard.h
2021-04-17 20:15:04 -05:00
fc4538f845
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-16 17:18:59 -05:00
b1f4a9a9fd
Merge pull request #4447 from tyomitch/patch-3
...
[synthio] add a simple MidiTrack implementation
2021-04-13 15:09:23 -07:00
9a3f04a1b8
Merge pull request #4599 from dhalbert/neopixel-trinkey-storage
...
Turn storage back on for NeoPixel Trinkey
2021-04-13 12:42:46 -04:00
1163af5d48
Merge pull request #4591 from jepler/same51-modules
...
same51: enable specific modules based on chip family
2021-04-13 11:47:08 -04:00
cc36402a64
turn storage back on
2021-04-13 11:06:59 -04:00
c6ee471b52
Merge branch 'main' of https://github.com/adafruit/circuitpython into patch-3
2021-04-13 00:32:19 -04:00
d136078768
try re-enabling storage
2021-04-12 22:17:20 -04:00
8053d4a7a3
remove neopixels
2021-04-11 22:33:03 -04:00
4f36504aeb
same51: enable specific modules based on chip family
...
closes #4590
2021-04-11 20:07:59 -05:00
42abb982fe
rename proxsense to proxlight
2021-04-11 18:39:14 -04:00
9dc6d691b8
add prox trinkey and rename others to adafruit_
2021-04-11 17:45:37 -04:00
56be8306cd
try adding a submodule?
2021-04-10 23:22:13 -04:00
137745e911
neokey trinkey friend
2021-04-10 23:04:48 -04:00
ebfe36c9aa
Merge pull request #4576 from felixerdy/main
...
Add senseBox MCU
2021-04-09 10:27:37 -07:00
61e33a5619
fix nrf ISR; make direction consistent across ports; save code size
2021-04-09 11:07:47 -04:00
ca6dda4d2b
reorder alias
2021-04-09 08:35:13 +02:00
3aec1032f7
atmel-samd: switch to shared softencoder implementation
2021-04-08 16:32:36 -05:00
e5cffa94e8
add aliases for TX and RX
2021-04-08 21:19:27 +02:00
8544249fc0
boards/bdmicro_vina_d51: Replace old rev with new rev and rename.
...
This update to the PR retains the earlier board rev (with a rename) so
that backward binary compatibility is not lost for the earlier board
revision. The primary name 'vina-d51' is retained for the latest
revision to make it easy for customers to select the proper UF2
download - because the name matches the commercial name.
Details:
Replace bdmicro_vina_d51 with bdmicro_vina_d51_pcb7 (revision 7 of
PCB) with boardfiles unmodified. Add _pcb7 to the workflow build.
Replace bdmicro_vina_d51 boardfile content with latest PCB updates
(revision 10 ov PCB). Add minimal comments in the board files to make
it clear which PCB revision is implemented. Update the USB PID to
reflect an updated board revision.
2021-04-07 09:11:30 -04:00
3e558a89ac
boards/bdmicro_vina_d51: A few updates for flexibility and expansion.
...
ESP-01 header renamed to AUX, and expanded to 12 pins from 8
pins. Pins 1-8 still accommodate the ESP-01, with expansion to full
SERCOM 4-pad support to allow for SPI and I2C on that expansion port
with additional GPIO control.
Update pins.c with additional signals provided AUX_1-8, along with
UART, SPI, I2C name usage as aliases to appropriate AUX_1-8
signals. Additionally, add several alternate names specific to several
expansion modules - the ESP-01, and the ATW-01 using the WINC_1500
(SPI) w/interrupt and control needed for the WINC - with assignments
to module pin positions.
Re-work SERCOM assignments to accommodate the above from other parts
of the board, which required moving a SERCOM or two around in order to
accommodate the 4-pad sercom pin mapping on the AUX port.
Built and tested using latest from 'main':
Adafruit CircuitPython 6.2.0-rc.0-70-ga1562430f-dirty on 2021-04-05;
BDMICRO VINA-D51 with samd51n20
2021-04-05 10:44:52 -04:00
8b6ffba392
Update comment
2021-04-04 11:10:32 -05:00
53f3282e9c
change flash device
2021-04-02 14:42:38 -06:00
f8da94b8ba
removed o¡modules not availables
2021-04-02 14:40:27 -06:00
c1987b7311
init port hunter cat nfc!
2021-04-02 13:19:59 -06:00
be50732515
Fix SD_DET pin assignment of seeduino_wio_terminal.
2021-04-01 17:09:56 +09:00
8056af8648
[synthio] add a simple MidiTrack implementation
2021-03-26 16:38:10 -04:00
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
cde659651b
add brown out detect level
2021-03-23 19:17:45 +01:00
4b42932188
Merge pull request #4449 from ladyada/main
...
adventure together with rotary trinkey
2021-03-20 13:37:31 -04:00
8884682cac
adventure together with rotary trinkey
2021-03-20 12:03:51 -04:00
bfc8c89536
Merge pull request #4403 from jepler/bitmap-read-2
...
bitmaptools: Add readinto, arrayblit
2021-03-17 07:57:31 -05:00
94fa8e8a60
disable bitmaptools on small board
2021-03-16 19:04:21 -05:00
75ba26ee7c
Merge pull request #4421 from kattni/led-pin
...
Adding LED for D13/L pin name.
2021-03-16 18:58:14 -05:00
1be5ca7881
Merge pull request #4130 from gamblor21/rp_dp_parallel
...
Add RP2040 displayio.ParallelBus Support
2021-03-16 13:49:55 -05:00
58679dc038
Merge remote-tracking branch 'origin/main' into bitmap-read-2
2021-03-16 12:21:50 -05:00
2b910b7292
Adding LED for D13/L pin name.
2021-03-16 12:14:40 -04:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
d3bf1fe15d
modifications by pre-commit
2021-03-15 18:11:00 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
6c32a1f67f
update pins of senseBox MCU
2021-03-15 10:27:50 +01:00
b33d77bfe8
disable bitmaptools on over-full board
2021-03-14 20:08:09 -05:00
de93df6444
add senseBox MCU
2021-03-12 17:57:55 +01:00
7321411962
Added frequency to parallel display
2021-03-11 19:32:43 -06:00
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
2c3002b327
Merge pull request #4370 from jposada202020/i2cperipheral_ctrlc
...
I2CPeripheral samd51 corrections in the CTRLC bit
2021-03-09 12:58:59 -08:00
be90fa80e8
Initial Changes
2021-03-09 10:48:33 -05:00
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
4f040af481
vm: Make the speed-size trade-off compile time settable
...
.. and enable for all samd21 boards
2021-03-05 18:29:27 -06:00
4cf6579e22
remove general changes; not consistent across builds
2021-03-05 10:10:50 -05:00
c97721455a
Shrink the smallest builds with compile options
2021-03-04 23:07:06 -05:00
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
0a58d451ad
Merge pull request #4306 from Neradoc/fix-reset-to-safe
...
press reset to safe mode on ports where reset reason is not implemented
2021-03-02 15:44:52 -05:00
e4f0e47d9f
Merge pull request #4233 from pewpew-game/displayio-group-list
...
displayio: make Group use a python list internally
2021-03-02 09:59:58 -08:00
248acd07c8
shrink builds
2021-03-02 12:25:42 -05:00
cb2cf81136
ugame10 - disable pulseio to make more room for the French
2021-03-02 11:11:55 +01:00
54d11a8e2d
Merge pull request #4299 from jamesbowman/main
...
Add EVE support for Feather M4 Express
2021-03-01 22:56:50 -05:00
d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup
...
Add `bitmaptools` module
2021-03-01 18:24:12 -08:00
0dabd1ace2
Add EVE support for Feather M4 Express
2021-03-01 14:42:48 -08:00
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
7562b0cbb8
Turn off GC opt on catwan_usbstick
2021-02-26 12:00:01 -08:00
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
ec4cd68edc
More mpconfigboard.mk corrections for small builds
2021-02-25 17:48:50 -06:00
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
fb32e0a7fd
qtpy_m0_haxpress: Change config to make it fit.
2021-02-25 09:44:33 +01:00
a30d4ad25d
set SUPEROPT_VM = 0 on most non-Express SAMD21 boards
2021-02-22 23:03:11 -05:00
8470f0fdb7
SAMD21: one endpoint pair for MSC now instead of two
2021-02-21 12:37:59 -05:00
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
9e626fdd5c
new cp sapling board
2021-02-14 20:00:32 -05:00
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
f6603aa566
Merge pull request #4168 from BHDynamics/main
...
Add DynaLoRa-USB Dongle
2021-02-10 11:03:16 -08:00
983c75fb24
Add more pin names
2021-02-10 12:19:50 +01:00
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
5bb722b927
Merge pull request #4122 from hathach/fix-3986
...
Fix 3986 background reset remove existing usb callback
2021-02-05 09:13:28 -05:00
70e15d61b2
ports/atmel-samd/boards/dynalora_usb/board.c
2021-02-05 13:24:59 +01:00
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
4eb396806c
Updated trinket_m0 make file to squeeze all translations as per Dan Halbert.
2021-02-03 11:47:56 +07:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
0dbd3293a9
Add board Silicognition LLC M4-Shim
2021-01-30 18:35:35 -07:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
abd9f7894d
Permit Gameduino 3X Dazzler support on that board.
...
Totally untested, change request based on change made in #2581 .
It might be my first PR in CircuitPython core...
Maybe this should be confirmed by @jamesbowman
Those are the two boards that seems supported:
* Metro M4 Express
* Metro nRF52840 Express
The only Metro that this PR concern:
* Metro M4 AirLift Lite
Other Metro I found and are maybe not supported:
* Metro ESP32-S2
* Metro M0 Express
* Metro M7 1011
2021-01-24 12:53:06 +01:00
dc421a6ca8
squeeze some builds
2021-01-23 06:18:15 -05:00
8c49c8df0a
shrink arduino_mkr1300
2021-01-22 11:26:33 -05:00
Jeff Epler
Dan Halbert
root
anecdata
Scott Shawcroft
Kattni
Limor "Ladyada" Fried
Artyom Skrobov
felixerdy
Brian Dean
sabas1080
Tsutomu IKEGAMI
Scott Shawcroft
Jeff Epler
Mark
gamblor21
microDev
jposada202020
Jeff Epler
Dan Halbert
Radomir Dopieralski
James Bowman
Kevin Matocha
Kamil Tomaszewski
Seth Kerr
Enrique Casado
BiffoBear
Patrick Van Oosterwijck
David Glaude