4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
c00a630f50
Update PulseOut.c
...
reorder the tests for zero-length
2022-08-23 15:58:27 -05:00
3daebb36c3
Fix handling of zero-length pulseout pulse
2022-08-23 15:17:54 -05:00
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
83cbbc9946
Add BLE status to title bar
2022-08-04 16:33:10 -07:00
a55aebc718
Added support for 8MB flash for Challenger 840
2022-07-26 20:34:01 -05:00
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
5ca6d8953d
use available constants instead of testing errors for length
2022-07-14 11:55:53 +02:00
50a9beda04
Retrieve the BLE name from dotenv if available
...
Format:
CIRCUITPY_BLE_NAME = My BLE Board
- the length is limited to 31 characters
- for the NRF version it repeatedly truncates the name if it's too long
- the ESP version defaults to "nimble" if the name is too long
2022-07-14 11:55:53 +02:00
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
c27ecc9bb1
Merge pull request #6495 from DavePutz/issue_6451
...
Test for a BLE disconnect while reading
2022-06-17 09:37:07 -07:00
cdc7140318
Test for a BLE disconnect while reading
2022-06-16 14:56:18 -05:00
894cea217d
Merge pull request #6486 from DavePutz/issue_6478
...
Fix for Issue #6478
2022-06-15 09:43:09 -07:00
8668dee3df
Fix declaration of print_wakeup_cause
2022-06-14 20:51:07 -05:00
669e45497c
Uncommented call to print_wakeup_cause
2022-06-14 13:27:15 -05:00
015e95807a
Fix for Issue #6478
2022-06-14 12:14:05 -05:00
1a3d2a5b5e
Shrink nrf52833 builds
...
Make them CIRCUITPY_FULL_BUILD = 0 and rework the boards to have
the same modules enabled (ish.)
Also make ZLIB require FULL_BUILD and disable advanced `micropython`
module APIs by default on all builds.
2022-06-13 15:36:15 -07:00
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
09c61efcff
Split partition from LTO enable
2022-06-01 11:12:14 -07:00
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
947f564672
tune LTO on nrf
2022-05-26 22:16:41 -04:00
d74193c298
Use -flto and -flto-partition only as needed
2022-05-26 11:36:41 -04:00
5ef1f2dd5a
Correctly scale analog reading per issue #4794
2022-05-24 08:45:14 -07:00
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
269d51d023
Add two stage reset for BLE
...
This lets the BLE stack run through the wait period after a VM run
when it may be waiting for more writes due to an auto-reload.
User BLE functionality will have their events stopped. Scanning and
advertising is also stopped.
2022-05-12 13:20:44 -07:00
e63a327107
Bound PulseIn start indexes to maxlen.
2022-04-28 02:28:34 +00:00
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
17bba7b17d
remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now
2022-04-19 06:49:11 +02:00
2693a4cfe1
Merge pull request #6069 from gamblor21/uzlib-module
...
zlib Module
2022-04-06 12:06:44 -04:00
286e26edf0
Added support for 4MB flash.
2022-04-06 11:08:22 +02:00
fe98248a3d
Merge remote-tracking branch 'origin/7.2.x' into merge-7.2.x
2022-04-05 08:45:13 -05:00
fa4b4fa639
nrf: Correctly mark PWM unused during reset
2022-04-04 10:08:54 -05:00
8ed7b114cd
Merge branch 'main' into uzlib-module
2022-04-03 11:48:37 -05:00
f2d10237d2
Merge branch 'adafruit:main' into main
2022-03-30 16:43:39 +02:00
fcde108d03
Merge pull request #6194 from jepler/revamp-duplicate-usb-check
...
Improve the USB vid:pid duplicate checker
2022-03-24 14:57:48 -07:00
bcec1e44f0
add status LED to nrf pca10059 dongdle
2022-03-24 15:05:02 -04:00
d91ca7369c
Merge remote-tracking branch 'origin/main' into revamp-duplicate-usb-check
2022-03-24 09:44:41 -05:00
a07ac72cc5
Improve the USB vid:pid duplicate checker
...
To me, it made more sense to track which boards go together in a cluster;
when reviewing a request to actually use a duplicate vid/pid, you want
to know what board(s) it is aliasing.
I also revamped the detection of non-USB boards so that a board .mk file
that couldn't be parsed by the code here would raise a problem instead
of just being skipped for the purposes of checking.
There were some lines with comments on the end, and some variation in
capitalization of the IDs. These are all normalized and a (sometimes
unfriendly!) error printed when it's incorrect.
Before this, here were some ways to trick the duplicate vid/pid checker:
```
USB_PID = 0XABCD
USB_PID = 0xAbCd
USB_PID = 0xABCD # harmless comment?
```
None of these things were ever done on purpose.
2022-03-24 09:42:11 -05:00
c7b28eb2ef
Update ports/nrf/boards/challenger_840/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:49 +01:00
d26297ae98
Update ports/nrf/boards/challenger_840/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:40 +01:00
7901850bb8
Update ports/nrf/boards/challenger_840/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:28 +01:00
5e09ed611e
Added Challenger 840 board.
2022-03-22 21:36:54 +01:00
367e0ea901
Enable rgb status LED on MakerDiary USB Dongle
2022-03-22 20:53:12 +01:00
51701e6abe
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-17 14:15:55 -07:00
78cb61c7a3
Turn off traceback on bluemicro833
2022-03-17 11:38:27 -07:00
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
4ffbf0830b
Merge pull request #6157 from arms22/ssci_isp1807_micro_board
...
Add board ssci_isp1807_micro_board
2022-03-15 13:42:34 -07:00
2b4917bbf5
change USB_PID
2022-03-15 14:54:29 +09:00
7482148a78
Add board ssci_isp1807_micro_board
2022-03-15 14:39:32 +09:00
b671ba81b9
Add board ssci_isp1807_dev_board
2022-03-15 14:29:24 +09:00
a719fabbb6
Shrink bluemicro833 build
2022-03-11 16:04:12 -08:00
9b2e22a6df
Make autoreload checking more robust
...
- Add reset for autoreload. De-request ticks.
- Separate state a little more in autoreload.c
- Rename some routines.
- Remove redundant settings of CIRCUITPY_AUTORELOAD_DELAY_MS.
2022-03-09 11:07:55 -05:00
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
c2434782c4
Seeed_XIAO_nRF52840_Sense: remove redundant MICROPY_HW_LED_STATUS
2022-03-03 10:18:58 +11:00
661140ebcc
Add missing BOARD_DICT_STANDARD_ITEMS to two boards
2022-03-03 09:03:34 +11:00
9ad50dfefb
Seeed_XIAO_nRF52840_Sense: Enable rgb status LED
2022-03-02 22:34:01 +11:00
edee8e3409
disable on some boards
2022-02-21 00:47:05 -06:00
8958e7ef08
Add S3 GATT client support
...
This allows you to connect to GATT services on the other device.
It also adds connection initiation (GAP central).
More progress on #5926
2022-02-10 11:31:57 -08:00
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
309f4fb2b9
add half_duplex false param to spi construct function call in some board files
2022-02-08 22:59:26 -05:00
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
2964e966b1
Merge pull request #5958 from dhalbert/i2c-common-hal-write-read
...
I2c common hal write read
2022-02-01 11:08:50 -08:00
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
c92c8ac184
Only enable is31fl3741 for led glasses board
...
Also fix a warning in is31fl3741
2022-02-01 09:45:50 +11:00
5a6f456dbb
Add BLE scanning for S3 and C3.
...
Everything else should raise NotImplementedError.
First step in #5926
2022-01-25 16:28:46 -08:00
9c31346c45
fix implmetation
2022-01-25 16:42:49 -05:00
70512758a9
enable binascii in microbit_v2 build
2022-01-25 16:06:47 -05:00
09bdad6c5b
Merge pull request #5877 from 0hotpotman0/main
...
Add softdev_version 7.0.1
2022-01-17 21:39:12 -05:00
9b9dd97e00
add softdev_version 7.0.1
2022-01-17 14:49:11 +08:00
86a482f520
add ble stack 7.3.0 version for complie the uf2 flie
2022-01-10 11:05:06 +08:00
9d2a32d07e
countio: add selectable rise and fall detection, pulls
2021-12-31 16:34:58 -05:00
3bc48802b1
Merge pull request #5783 from jepler/longint-config
...
Centralize LONGINT_IMPL handling
2021-12-28 12:55:26 -05:00
ea638c0401
Merge pull request #5753 from 0hotpotman0/main
...
Add new board Seeed_XIAO_nRF52840
2021-12-27 15:41:14 -07:00
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
0f5b20c650
Correct pin name
2021-12-27 13:45:39 +08:00
9810f0f824
Correct the pin LED
2021-12-27 09:24:33 +08:00
0cbbfadad9
Correct the pin name and add the monitor battry function
2021-12-24 18:51:26 +08:00
e86810fce2
updating UF2_FAMILY_ID for nrf52833
2021-12-23 16:32:00 -06:00
03a80e429b
Add new line for pre-commit
2021-12-21 16:21:10 -08:00
745003751c
Add new board Seeed_XIAO_nRF52840
2021-12-21 19:08:11 +08:00
7b2980ead2
fix missing pintout.
...
fix missing pintout p20 & p21 for makerdiary_nrf52840_mdk_usb_dongle.
2021-12-15 09:57:26 +08:00
7137f1b1c0
added never_reset to board_init
2021-12-08 17:29:53 -06:00
448a96ce1b
added CIRCUITPY_IS31FL3741 = 0
2021-12-08 17:22:54 -06:00
53f4137d6f
updated pin defs
2021-12-08 17:21:13 -06:00
4cad5beb90
minor udate to USB desc
2021-12-08 17:17:56 -06:00
e946dcffff
initial BlueMicro8333 Files
2021-12-08 17:17:56 -06:00
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
f7df39ef88
Re-enable on microbit v2
2021-11-23 13:20:00 -06:00
5337e45411
Only enable if not disabled
2021-11-21 11:39:42 -06:00
6d412e20c4
Disabling from some boards
2021-11-20 14:04:49 -06:00
d063bf2675
Initial commit for IS31
2021-11-20 13:46:11 -06:00
adac5ee596
Merge pull request #5563 from jepler/enable-error-missing-prototypes
...
Additional missing-prototypes fixes
2021-11-11 11:57:43 -05:00
340d6b9213
more missing-prototypes fixes
2021-11-10 21:00:17 -06:00
e7d9dc323b
shrink kicksat-sprite, simmel, pyb_nano_v2
2021-11-10 21:12:41 -05:00
Dan Halbert
DavePutz
Scott Shawcroft
Arudinne
Neradoc
Dan Halbert
foamyguy
Paint Your Dragon
Michael Wisslead
Pontus Oldberg
Jeff Epler
Mark
jerryneedell
Neradoc
arms22
Michael Himing
gamblor21
Scott Gauche
Scott Shawcroft
0hotpotman0
Jeff Epler
Pierre Constantineau
Asura