Commit Graph

139 Commits

Author SHA1 Message Date
Scott Shawcroft b73b30ff9f
Switch to upstream TinyUSB 2021-01-21 11:33:13 -08:00
Scott Shawcroft 733094aead
Add initial RP2040 support
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.

Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
Damien George 0ce6948653 lib/libhydrogen: Add new libhydrogen submodule.
This library is a small and easy-to-use cryptographic library which is well
suited to embedded systems.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Jonah Yolles-Murphy 8f8af90098 final name and extra board 2021-01-13 23:51:34 -05:00
Jonah Yolles-Murphy 8652d69614 update TG-Watch pins, name, and frozen libraries 2021-01-10 04:04:50 -05:00
Scott Shawcroft 0dcc659d53
Swap to IDF release/4.2 branch for stability 2020-12-15 18:12:59 -08:00
Scott Shawcroft 4ac4faaaf6
Use nina-fw root certs
That way we have one set we use for all of Adafruit's connected
devices.
2020-11-30 17:02:26 -08:00
Jeff Epler 231e3d362d esp32s2: Update esp-idf submodule to include fix for #3424
This re-points the submodule to my personal fork of esp-idf.
Users may need to `git submodule sync` in their existing trees when
this change occurs.

Adds just the following commit in esp-idf:
  > esp_crt_bundle: Allow verify_callback to correct BADCERT_BAD_MD
2020-11-14 10:16:39 -06:00
hathach b7ed18d622 change idf to espressif
fix hal includes
2020-10-08 00:52:00 +07:00
Lucian Copeland 0d7552b67e Update ESP-IDF to newer fixed fork 2020-10-06 12:48:28 -04:00
Lucian Copeland 66b8559fd4 Change submodule, rework all includes 2020-09-30 11:26:07 -04:00
Jerry Needell 2529ee2359 freeze rfm69 and bus_device libraries int feather_m0_rfm69 2020-09-09 14:54:20 -04:00
Jerry Needell 432f43a472 freeze rfm9x and BusDevice, remove many built-in modules 2020-08-05 11:37:57 -04:00
Diego Elio Pettenò 34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
Scott Shawcroft 6aaab005c5
Initial ESP32S2 port.
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
TG-Techie b9e494b85a add submodule to TG-Watch02A 2020-04-28 00:03:02 -04:00
Jeff Epler 09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Lars Kellogg-Stedman abf79de785 Fix bad submodule path
The repository URL for extmod/ulab had a trailing slash, causing
errors when trying to clone it.

Closes #2762
2020-04-11 09:02:52 -04:00
Lucian Copeland ef7370d023 Change ST drivers submodule to match TinyUSB 2020-03-12 17:14:09 -04:00
Lucian Copeland be7def128a submodule move and sync 2020-03-11 18:16:16 -04:00
Jim Mussared f46782dde9 mimxrt: Add new, minimal port to NXP i.MX RT series CPUs.
This is an extremely minimal port to the NXP i.MX RT, in the style of the
SAMD port  It's largely based on the TinyUSB mimxrt implementation, using
the NXP SDK.  It currently supports the Teensy 4.0 board with a REPL over
the USB-VCP interface.

This commit also adds the NXP SDK submodule (also from TinyUSB) to
lib/nxp_driver.

Note: if you already have the tinyusb submodule initialized recursively you
will need to run the following as the tinyusb sub-submodules have been
rearranged (upstream):

    git submodule deinit lib/tinyusb
    rm -rf .git/modules/lib/tinyusb
    git submodule update --init lib/tinyusb
2020-03-11 15:34:13 +11:00
Jeff Epler eab9b670d8 ulab: Use https://github.com/v923z/micropython-ulab/
The only delta we were carrying was in the README.
2020-03-09 14:48:52 -05:00
Damien George d35fefe30a lib: Add BlueKitchen BTstack submodule. 2020-03-10 01:53:42 +11:00
Jeff Epler dc64857a7d
Merge branch 'master' into ulab 2020-02-29 21:54:39 -06:00
arturo182 3f26a0b06b Freeze adafruit_requests and adafruit_esp32spi into feather_mimxrt1011 2020-02-29 00:26:39 +01:00
Jeff Epler fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
Max Holliday ffd15c29dc trying to add Adafruit_CircuitPython_Register again 2020-02-08 16:15:23 -08:00
Scott Shawcroft 7d8dac9211
Refine iMX RT memory layout and add three boards
Introduces a way to place CircuitPython code and data into
tightly coupled memory (TCM) which is accessible by the CPU in a
single cycle. It also frees up room in the corresponding cache for
intermittent data. Loading from external flash is slow!

The data cache is also now enabled.

Adds support for the iMX RT 1021 chip. Adds three new boards:
* iMX RT 1020 EVK
* iMX RT 1060 EVK
* Teensy 4.0

Related to #2492, #2472 and #2477. Fixes #2475.
2020-01-17 17:36:08 -08:00
arturo182 13e0cba6f1 Add initial MIMXRT10XX port 2020-01-06 21:08:49 +01:00
KalbeAbbas 89ed64157d
Merge branch 'master' into master 2019-12-16 13:25:44 +05:00
Jeff Epler a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00
Scott Shawcroft 17c8356b8c
Add connection interval and debugging
This also sets TinyUSB to master and to not include its submodules.

It also fixes an old displayio example comment and retries gattc
reads.
2019-12-04 14:39:02 -08:00
KalbeAbbas 9ce2087a75 change 2019-11-13 17:18:00 +05:00
KalbeAbbas 040f201fab added SD card module 2019-11-13 15:44:59 +05:00
KalbeAbbas f6577fc9f7 SD card folder removed 2019-11-13 15:11:03 +05:00
KalbeAbbas 6161c72270 SD card folder added 2019-11-12 20:09:57 +05:00
Kamil Tomaszewski 1fa8841d20 Change port name to cxd56 2019-10-11 08:23:51 +02:00
Kamil Tomaszewski 6d1748fd59 Add spresense-exported-sdk submodule 2019-10-09 08:38:50 +02:00
Damien George 21507a6f62 lib/mynewt-nimble: Add Apache mynewt nimble as a submodule.
Tag nimble_1_1_0_tag.
2019-10-01 09:51:02 +10:00
Hierophect a63df51893 Requested changes, general cleanup 2019-07-24 14:21:27 -04:00
Hierophect 5ee5c35833 Doc error caused by submodule, misc cleanup 2019-07-23 15:28:48 -04:00
Hierophect 5cfde7b6ea Switch to submodule for cube files 2019-07-23 14:37:30 -04:00
Damien George 258d10862d lib: Add tinyusb as a submodule. 2019-07-01 17:18:44 +10:00
Damien George 875af757bd lib: Add asf4 as a submodule. 2019-07-01 17:18:44 +10:00
Damien George 399417adba lib: Add new submodule for mbedtls, currently at v2.17.0.
From upstream source: https://github.com/ARMmbed/mbedtls.git
2019-06-05 15:21:40 +10:00
Scott Shawcroft ab6896206d
Remove lwip submodule because it is unused. 2019-03-29 15:03:10 -07:00
Radomir Dopieralski d81db3bced Merge branch 'master' of github.com:adafruit/circuitpython 2019-03-19 09:20:05 +01:00
Radomir Dopieralski a50ee4f650 Add frozen stage module to ugame10 board
And also ignore some more pins.

This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
Radomir Dopieralski 5d85d54026 Move the frozen pew.py into a submodule 2019-03-01 16:24:22 +01:00
Scott Shawcroft 590e029198
Begin font parsing and packing for terminal 2019-01-31 11:42:13 -08:00
Scott Shawcroft 45b301856c
Switch TinyUSB back to hathach's version. The merge commit of the commit we were on. 2018-12-06 15:39:47 -08:00
Scott Shawcroft 9d07e95351
Add support for adding release info into adafruit/circuitpython-org
This also changes the build script to python with better output.
2018-11-30 00:30:57 -08:00
Scott Shawcroft 9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
Dan Halbert e203ce9ce5 Use adafruit/nrfx fork of NordicSemiconductor/nrfx 2018-10-31 23:18:59 -04:00
Scott Shawcroft de5a9d72dc
Compress all translated strings with Huffman coding.
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.

Builds without LTO work as well but include both untranslated
strings and compressed strings.

This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531.
2018-08-16 17:40:57 -07:00
glennrub 002f7d1ad7 nrf: Replace custom-HAL with nrfx-HAL
Summarized this squashed PR replaces the hal/ folder in the port. This has been replaced the official
HAL layer from Nordic Semiconductor; https://github.com/NordicSemiconductor/nrfx.

A Git submodule has been added under lib/nrfx, for the nrfx dependency.

The drivers / modules has been updated to use this new HAL layer; nrfx at v1.0.0.

Also, header files and system files for nrf51/nrf52x chip variants has been deleted from the device/ folder, only keeping back the startup files written in C. All other files are now fetched from nrfx.

3 new header files in the ports/nrf/ folder has been added to configure nrfx (nrfx_config.h), logging (nrfx_log.h) and glue nrfx together with the drivers and modules from micropython (nrfx_glue.h).

The PR has been a joint effort from @aykevl (Ayke van Laethem) and @glennrub.

For reference, the commit log will be kept to get an overview of the changes done:

* ports/nrf: Initial commit for moving hal to Nordic Semiconductor BSD-3 licensed nrfx-hal.

* ports/nrf: Adding nrfx, Nordic Semiconductor BSD-3 hal layer, as git submodule checked out at lib/nrfx.

* ports/nrf/modules/machine/uart: Fixing bug which set hwfc to parity excluded, always resulting in no flow control, hence corrupted output. Also adding an extra loop on uart_tx_char to prevent any tx when any ongoing tx is in progress.

* ports/nrf/i2c: Moving I2C over to nrfx driver.

* ports/nrf/modules/machine/i2c: Alignment. Renaming print function param 'o' to 'self_in'

* ports/nrf/spi: Updating SPI machine module to use nrfx drivers.

* ports/nrf: Renaming modules/machine/rtc.c/.h to rtcounter.c/.h to not confuse the peripheral with Real-Time Clock:

* ports/nrf: Updating various files after renaming machine module RTC to RTCounter.

* ports/nrf: Renaming RTC to RTCounter in modmachine globals dict table. Also updating object type name to reflect new module name.

* ports/nrf: Fixing leftovers after renaming rtc to rtcounter.

* ports/nrf: Early untested adoption of nrfx_rtc in RTCounter. Untested.

* nrf/modules/machine/i2c: Improve keyword argument handling

* ports/nrf/modules/temp: Updating Temp machine module to use nrfx defined hal nrf_temp.h. Moving logic of BLE stack awareness to machine module.

* ports/nrf/boards/pca10040: Enable machine Temp module.

* nrf/modules/machine/rtcounter: Remove magic constants.

* ports/nrf: Adding base support for nrfx module logging. Adding option to disable logging of UART as it might log its own setup over UART while the peripheral is not yet set up. Logging of UART could make sense if other transport of log is used.

* ports/nrf: updating nrfx_log.h with more correct parenthisis on macro grouping.

* ports/nrf: Updating nrfx logging with configuration to disable logging of UART module. The pattern can be used to turn off other modules as well. However, for now UART is the only module locking itself by logging before the peripheral is configured. Logging is turned off by default, can be enabled in nrfx_config.h by setting NRFX_LOG_ENABLED=1.

* ports/nrf/modules/random: Updating modrandom to use nrfx hal for rng. Not using nrfx-driver for this peripheral as its blocking mode would do the trick on RNG. Moving softdevice aware code from legacy hal to modrandom.c.

* nrf: Enable Peripheral Resource Sharing.

This enables TWI and SPI to be enabled at the same time.

* nrf/Makefile: Define MCU sub variant (e.g. NRF51822/NRF51422)

* nrf: Port TIMER peripheral to nrfx HAL.

* nrf/modules/machine/uart: Optimize UART module

For a nRF51, this results in a size reduction of:
.text: -68 bytes
.data: -56 bytes

* nrf/modules/machine/uart: Don't use magic index numbers.

* nrf/modules/machine/uart: Fix off-by-one error.

For nrf51:
.text: -40 bytes

* nrf/modules/machine/rtcounter: Update for nrfx HAL.

* nrf/modules/machine/i2c: Reduce RAM consumption.

Reductions for the nrf51:
flash: -108 bytes
RAM:   -72 bytes

* nrf/mpconfigport: Avoid unnecessary root pointers.

This saves 92 bytes of RAM.

* nrf: Support SoftDevice with nrfx HAL.

* nrf: Add NVMC peripheral (microbitfs) support.

There is no support yet for a SoftDevice.

It also fixes a potentially serious bug in start_index generation.

* nrf/modules/machine/spi: Optimize SPI peripheral.

nrf51:
text: -340 bytes
data: -72  bytes

nrf52:
text: -352 bytes
data: -108 bytes

* nrf/modules/random: Forgot to commit header file.

* nrf: Make nrfx_config.h universal for all boards.

* nrf: Use SoftDevice API for flash access when built for SD

* nrf/drivers/bluetooth: Remove legacy HAL driver includes.

These were not used anymore so can be removed.

* ports/nrf/microbit: Port microbit targets to nrfx HAL

Initial port of microbit modules to use nrfx HAL layer.
Tested display/image and modmusic on micro:bit to verify that
softpwm and ticker for nrf51 is working as expected.

Changing IRQ priority on timer to priority 2, as 1 might collide if
used side by side of SD110 BLE stack.

The patch reserves Timer1 peripheral compile time. This is not ideal
and should be resolved in seperate task.

* nrf/boards/microbit: Remove custom nrfx_config.h from microbit target, adding disablement of timer1 if softpwm is enabled.

* nrf/adc: Update ADC module to use nrfx

* nrf/modules/machine/pwm: Updating machine PWM module to use nrfx HAL driver.

examples/nrf52_pwm.py and examples/nrf52_servo.py tested on pca10040.

* nrf: Removing hal folder and boards nrf5x_hal_conf.h headers.

* nrf/nrfx_glue: Adding direct NVIC access for S110 BLE stack

If SoftDevice s110 has not yet been initialized, the IRQ will not be forwarded to
the application using the sd_nvic* function calls. Hence, direct access to cmsi
nvic functions are used instead if SoftDevice is not enabled.

* nrf/drivers/ticker: Setting IRQ priority 3 on Timer1

SoftDevice fails to initilize if Timer1 has been configured to priority
level 2 before enabling the SD. The timer is set to priority 1, higher than BLE
stack in order to provide better quality of music rendering when used with the
music module. This might be too high, time will show.

* nrf/examples: Updating ubluepy_temp after moving RTCounter to nrfx.

* nrf: delete duplicate files from device folder which can be located in nrfx/mdk.

* nrf/Makefile: Fetch system files from nrfx.

Testing on each device sub-variant to figure out which system file to
use. Reason for this is that nrf52.c is actually defining nrf52832.

Removing NRF_DEFINES parameter setting the device in use into the
same sub-variant test, as NRF52 is unique to nrf52832 when using nrfx.
Without this exclusion of -DNRF52 in compilation for nrf52840, the
device will be interpreted as a nrf52, hence nrf52832.

Also, changing name on variable SRC_NRF_HAL to SRC_NRFX_HAL to
explicitly tell the origin of the file.

* nrf: Updating device #ifdefs to be more open to non-nrf51 targets.

* nrf/modules/machine/uart: Removing second instance of UART for nrf52840 as it only has one non-DMA variant.

* nrf/device: Removing system files as these are now used from nrfx/mdk

* nrf: Moving startup files in device one level up as there is no need for deep hierarchy.

* nrf: Use NRF52_SERIES defined in nrfx/mdk/nrf.h as define value when testing for both nrf52(832) and nrf52840 variants.

* nrf/modules/machine/uart: Enable UART RX by default

Enable rx by default after intiialization of the peripheral.
Else, the nrfx driver will re-enable rx for each byte read
on uart REPL, clearing the EVENT_RXDRDY before second byte,
which again will make second byte get lost and read will get stuck.

This happens if the bytes are transmitted nrf(51) while still
processing the previous byte. Not seen on nrf52, but should
also become an issue at higher speeds.

This patch sets rx to always be enabled. Hence, not clearing the event
between read bytes, and it will be able to detect next byte recieved
upon finishing the first.

* nrf/modules/machine/timer: Fixing defines excluding Timer1 if ticker/softpwm is used.

* nrf: Switching import form mpconfigboard.h to mpconfigport.h in nrfx_config.h as mpconfigboard.h might define default values for defines not set by board specific header.

* nrf/modules/machine/i2c: nrfx integration fixes

Increasing speed to 400K.

Returning Address NACK's as MP error code; MP_ENODEV.

Returning MP_ETIMEOUT on all other error codes from TWI nrfx driver
except the ANACK.

Enabling and disabling the TWI peripheral before and after each transaction.

* nrf/examples: Updating ssd1306_mod.py to split framebuffer transfer into multiple chunks

* nrf/modules/machine/i2c: Return MP_EIO error if Data NACK occurs.

* nrf: Addressing review comments.

* nrf: Updating git submodule and users to nrfx v1.0.0.

* nrf/modules/machine/adc: Update adc module to follow v1.0.0 nrfx API.

* nrf/modules/machine/spi: Implement init and deinit functions

Extending SPI objects with a config member such that
configuration can be kept between new() and init().

Moving initialization done in new() to common init
function shared between the module functions.

If SPI is already configured, the SPI peripheral will
be uninitialized before initalized again.

Adding logic to handle initialization of polarity and
phase. As well, updating default speed to 1M from 500K.

* nrf/modules/machine: Removing unused nrfx includes in machine module header files
2018-07-18 17:12:26 +10:00
Dan Halbert 2809b4f9dd Merge branch 'master' into micropython-25ae98f-merge 2018-07-16 19:36:40 -04:00
Dan Halbert a20ab40ed2 Merge 3.0.0 final bugfixes and changes to master 2018-07-16 09:01:46 -04:00
Dan Halbert 7c219600a2 WIP: after merge; before testing 2018-07-11 16:45:30 -04:00
hathach 4b1f880904 clean up 2018-07-12 02:08:03 +07:00
hathach 69f224aec3 change gitmodule link from git to https 2018-07-10 02:39:38 +07:00
hathach 46c453cf0a add tinyusb as submodule 2018-07-03 17:46:08 +07:00
arturo182 5509f394dc nrf: Add a nrfx submodule and prepare for using the new drivers 2018-06-20 20:43:59 +02:00
Scott Shawcroft a5e03b76a6 Split out the peripherals library in preparation of sharing with MakeCode. 2018-06-15 16:16:21 -07:00
Dan Halbert b9f36184f5 refine pirkey build 2018-05-24 13:28:03 -04:00
Dan Halbert 5680933483 refactor longint settings; make crickit cpx build 2018-05-21 23:58:03 -04:00
Jeff Epler a6072f7ae3 uzlib: convert to submodule
Textualy, the files in lib/uzlib/src were identical to the ones committed
in extmod/uzlib so there should be no behavioral change possible as a
result of this commit.
2018-05-07 20:03:30 -05:00
Dan Halbert 32363b801b 3.0: add CircuitPlayground and HID to CPX frozen modules 2018-05-04 08:44:33 -04:00
Scott Shawcroft 19b0b414e6 Remove freetouch files that were accidentally checked in and
readd the submodule.
2018-03-28 14:04:53 -07:00
Damien George bd257a838f .gitmodules: Use https URL for lwIP submodule.
HTTPS is supported by Savannah and better to be secure than not.
2018-01-31 18:55:35 +11:00
Dan Halbert 065e82015f merge from 2.2.0 + fix up board defs 2018-01-02 21:25:41 -05:00
microbuilder 60a23f0fb6 nRF52 update with internal file system support 2017-12-21 13:49:14 +01:00
Kevin Townsend ce75a21e50 Revert "Supervisor REPL support for ports/nrf/boards/feather52"
This reverts commit 92113dde81.
2017-11-23 13:38:38 +01:00
Kevin Townsend 92113dde81 Supervisor REPL support for ports/nrf/boards/feather52 2017-11-23 09:22:11 +01:00
Scott Shawcroft a49200d5cb tools: Switch to using separate usb_descriptor repo. 2017-11-02 13:00:50 -07:00
Scott Shawcroft 2c26f35429 Re-add atmel submodules. 2017-10-24 22:39:08 -07:00
Scott Shawcroft 73c15dcf8b Merge commit 'f869d6b2e339c04469c6c9ea3fb2fabd7bbb2d8c' into nrf2_merge
This is prep for merging in the NRF5 pull request.
2017-10-24 22:31:16 -07:00
Dan Halbert fabaa2ec30 merge 2.x changes into master; touch up Makefile CFLAGS logic 2017-10-12 20:10:31 -04:00
Dan Halbert b7591cfd19 Replace asf4 tree with submodule repo adafruit/asf4, branch circuitpython. 2017-10-12 10:55:15 -07:00
Dan Halbert ef65ee78c5 Freeze libraries needed by adafruit_circuitplayground library into firmware.
This saves a lot of RAM. Fixes #287.
Also fixed compilation of frozen_mpy.c to use supplied make rule rather than
builtin rule (supplied rule suppresses printing out the gcc command line).
2017-10-08 10:54:46 -06:00
Damien George 904eb2d9f3 lib: Add new submodule, stm32lib containing STM32 CMSIS and HAL source.
Linked to https://github.com/micropython/stm32lib
2017-08-29 13:39:09 +10:00
Dan Halbert 74cfdeb316 Added ability to freeze multiple directories; freeze neopixel library in cpx build (#199)
Reworked frozen module support: clean up makefiles and handle multiple directories.
Modules to freeze are included as git submodules.

Add neopixel to circuitplayground express build.

Fixes #56
2017-08-23 11:05:59 -07:00
Scott Shawcroft 98667b1af8 Turn on build saving and uf2 creation. 2017-04-20 14:04:06 -07:00
Scott Shawcroft 076ff82c46 atmel-samd: Switch to https for freetouch submodule. 2017-04-18 12:34:03 -07:00
Scott Shawcroft 67ec52d7a9 atmel-samd: Swap out pulseio for touchio based on FreeTouch. 2017-04-18 09:44:04 -07:00
Paul Sokolovsky 06b783cf58 lib/berkeley-db-1.xx: Add Berkeley DB 1.85 as a submodule.
From https://github.com/pfalcon/berkeley-db-1.xx, which so far contains
pristine 1.85, but will get patches and compile warning fixes going
forward.

Berkeley DB 1.xx is BSD-licensed, and will form the basis of "btree"
simple database module.
2016-06-14 22:20:18 +03:00
Galen Hazelwood 22cb7cd953 lib/lwip: Add LwIP stack as a submodule in the library directory 2015-10-23 00:35:20 +03:00
Paul Sokolovsky c13be69a8e lib/libffi: Add libffi as a submodule.
This allows to build libffi from source together with micropython, and is
useful for cross-compilation. Support for this was already merged
previously, to use:

make libffi
make MICROPY_STANDALONE=1

(To both commands appropriate cross-compilition flags can be added).
2015-10-17 15:52:35 +03:00
Paul Sokolovsky 90a36942b4 lib/axtls: Add axtls git submodule, dependency of modussl.
From https://github.com/pfalcon/axtls , branch micropython.
2015-10-04 02:39:00 +03:00