Scott Shawcroft
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
Scott Shawcroft
642fbcf87a
Handle status led power
...
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
Scott Shawcroft
6164d44e6d
Turn off LED after REPL
2021-05-18 11:32:45 -07:00
Scott Shawcroft
5c33c9d597
Fix SAMD
...
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
2021-05-14 16:14:24 -07:00
Scott Shawcroft
689ec86225
Merge pull request #4754 from dhalbert/fix-endpoint-checking
...
Fix endpoint checking; Clean up safe mode printing
2021-05-14 11:25:01 -07:00
Scott Shawcroft
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
Dan Halbert
0651ef17dd
Fix endpoint checking; Clean up safe mode printing.
2021-05-12 15:53:52 -04:00
Lucian Copeland
0d3c5222d8
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-05-10 17:30:33 -04:00
Dan Halbert
4b45c37516
Do USB init even in safe mode
2021-05-08 11:03:05 -04:00
Dan Halbert
ebf9dcb47a
Merge pull request #4689 from dhalbert/dynamic-usb-descriptors
...
Dynamic USB descriptors
2021-05-06 13:51:38 -04:00
Lucian Copeland
f38f5dbce6
Set reload reason when reloaded from repl
2021-05-05 17:02:32 -04:00
Lucian Copeland
17ee507f09
Remove overwrite of run_reason in main
...
When `reload_requested` is detected, the run reason will no longer be
automatically overwritten as an AUTO_RELOAD, making SUPERVISOR_RELOAD a
detectable reload reason. Autoreload now sets the reload reason itself.
2021-05-04 17:04:24 -04:00
Dan Halbert
abfb020d41
MSC, CDC, HID keyboard definitely working
2021-04-29 17:41:43 -04:00
Dan Halbert
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
Lucian Copeland
9feef41c82
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-04-28 15:10:55 -04:00
Dan Halbert
587aedd14f
rework storage allocation
2021-04-28 13:00:44 -04:00
Dan Halbert
d4d96bb25f
Merge pull request #4236 from jun2sak/nrf52-sleep
...
sleep and wakeup for nrf52
2021-04-28 12:11:31 -04:00
Dan Halbert
8500e846c6
partially working
2021-04-27 23:53:23 -04:00
Dan Halbert
f98a54628b
wip: compiles
2021-04-27 14:37:36 -04:00
Dan Halbert
c26e49c2e6
wip: starting to try to compile
2021-04-25 23:17:41 -04:00
Dan Halbert
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
jun2sak
7accb8b173
modify copyright notice.
2021-04-25 19:57:21 +09:00
Artyom Skrobov
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
Dan Halbert
2b4c88d633
wip: partial HID, still needs rework
2021-04-23 00:18:05 -04:00
Dan Halbert
4a7e129287
wip: latent usb device enabling/disabling
2021-04-13 23:33:44 -04:00
jun2sak
6e9429d779
soft reboot for pretending deep sleep.
2021-04-12 20:53:14 +09:00
Lucian Copeland
15764b4c24
Merge remote-tracking branch 'upstream/main' into nrf52-sleep
2021-04-09 13:48:45 -04:00
Lucian Copeland
17585e1e07
Clean up API
2021-04-02 14:08:48 -04:00
Lucian Copeland
d35a307ffa
Merge branch 'sleep-api-update' into stm-alarm
2021-03-29 12:27:25 -04:00
Lucian Copeland
00178ca5e0
Sleep API changes, redundancy fix
2021-03-27 14:14:57 -04:00
Lucian Copeland
529fb52309
Style changes and wakeup detection
2021-03-27 13:16:12 -04:00
Lucian Copeland
6b2c9985ff
Extract RTC, implement fake RTC deepsleep
2021-03-11 17:50:05 -05:00
jun2sak
3fab9f8b1b
new wait-until-alarm design, don't use System OFF.
2021-03-07 01:09:54 +09:00
Lucian Copeland
f1792c8474
Extract EXTI, create base sleep framework
2021-03-02 11:41:53 -05:00
jun2sak
7bb789625e
use the original port_idle_until_interrupt() if not CIRCUITPY_ALARM.
2021-02-28 16:27:37 +09:00
jun2sak
3e47e00291
address the pretending-to-deep-sleep issue.
2021-02-28 15:57:37 +09:00
jun2sak
fac86c8277
remove unused debug printf's.
2021-02-28 15:34:55 +09:00
jun2sak
9661d67cd3
replace MY_DEBUG_UART -> NRF_DEBUG_PRINT.
2021-02-25 01:49:57 +09:00
jun2sak
057682f776
cleanup.
2021-02-24 00:13:11 +09:00
jun2sak
ec64fa6a29
move dump_xxx functions to debug_uart.c.
2021-02-23 12:16:37 +09:00
jun2sak
1da8b9900a
Merge branch 'main' into nrf52-sleep
2021-02-21 13:35:06 +09:00
jun2sak
26f8f532f1
safe mode fix.
2021-02-21 00:47:07 +09:00
jun2sak
e6350ff834
Initial commit.
2021-02-17 20:53:18 +09:00
Dan Halbert
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
Dan Halbert
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
hathach
8d7b1f9e8c
add usb_background_schedule()
...
unconditionally schedule usb background after
background_callback_reset()
2021-02-04 16:00:14 +07:00
Scott Shawcroft
fb1e0106b5
Fix press any key message
2021-01-20 19:16:56 -08:00
microDev
0bad6110d4
update wake-alarm implementation
2020-12-31 02:44:20 +05:30
Scott Shawcroft
1fca297a2d
A couple sleep fixes
...
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
2020-12-22 16:13:02 -08:00
Dan Halbert
d4e9eea397
mark alarm.wake_alarm during gc sweep
2020-12-22 08:11:01 -08:00
