ef39e72c7c
free event handlers on reset; fix typo in Broadcaster
2018-12-29 13:55:10 -05:00
de7cadb9b2
fix typos in internal_flash.c
2018-12-29 00:08:04 -05:00
145e110915
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-29 00:00:39 -05:00
4d1f0ec07b
Add Broadcaster. Reset correctly on reload.
2018-12-28 23:34:23 -05:00
6b0d93cea3
correct i2c max len
2018-12-28 21:14:27 +07:00
a4ee80832a
fix #1422 correct i2c max xfer len (size in bits)
2018-12-28 16:30:11 +07:00
3ee766bc01
put received bytes to fifo when error
2018-12-28 01:05:30 +07:00
d092722ae8
fix #1407 keep receiving in case of error
2018-12-28 00:40:29 +07:00
55084b30ef
remome FRAMEBUF from nrf builds - use QSPI for particle ARGON
2018-12-27 09:38:35 -05:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
f5b15c9b4d
Merge remote-tracking branch 'origin/feather52840-rgb-qspi-fixes' into bleio-rev
2018-12-21 21:28:24 -05:00
0dfe2dbff0
return error status on more routines; minor simplification of freq setting
2018-12-21 12:30:54 -05:00
bce6d124af
Don't check for corrupt heap too early; Fix QSPI timing
2018-12-20 21:28:36 -05:00
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
6752266673
added pulsein using gpiote (gpio interrupt)
2018-12-18 22:05:17 +07:00
bfa66861ef
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-13 16:33:15 -05:00
b37b2fa7e7
overwrite old data if fifo is full
2018-12-13 23:56:06 +07:00
e136222ae2
use rbuf for busio uart
2018-12-13 23:48:53 +07:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
70939ad517
Merge pull request #1395 from jerryneedell/jerryn_cpython
...
enable MICROPY_CPYTHON_COMPAT
2018-12-11 10:54:17 -08:00
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.
2018-12-10 20:32:19 -08:00
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840
2018-12-10 20:13:36 -08:00
a90343022a
enble MICROPYTHON_CPYTHON_COMPAT - fix mpconfigport.h to allow and enable a few more items for compatiblilty with other builds
2018-12-10 16:35:40 -05:00
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
a7a24096f4
bleio WIP: redo for more immutability; use sd_* routines for internal flash write
2018-12-07 16:52:47 -05:00
df84da5913
Stub out serial_write as well
2018-12-07 09:32:37 -08:00
808ca676b6
Fix unix
2018-12-06 17:12:30 -08:00
332ea8853f
Macro guard VDDH inclusion.
2018-12-06 16:38:14 -08:00
817766acdc
Use the stub for ESP8266 as well.
2018-12-06 15:47:16 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
125901e4e2
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-06 12:41:38 -05:00
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
b25bf062fb
Add correct flash chip for Particle Mesh boards
2018-12-04 18:20:51 -08:00
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
3fa8796668
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 15:01:03 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
09316b35d7
remove non-broken-out nrf pins. re-organize pins.c list.
2018-11-30 14:58:36 -07:00
6e15ab6385
Stop ignoring SD hex files and improve the error when its missing.
2018-11-30 13:26:12 -08:00
df18d22a93
Capture stderr as well and work on nRF build
2018-11-30 12:59:05 -08:00
f67814fc97
Adding SparkFun nRF52840 Mini board support.
2018-11-30 13:57:22 -07:00
cf70dc4f1c
Fix BLE build
2018-11-30 11:53:33 -08:00
56345ff997
A few tweaks based on review feedback
2018-11-30 10:58:27 -08:00
9d07e95351
Add support for adding release info into adafruit/circuitpython-org
...
This also changes the build script to python with better output.
2018-11-30 00:30:57 -08:00
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
d446d328d8
Fix QSPI on Feather nRF52840
...
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
2018-11-27 00:13:24 -08:00
3164b16196
WIP: debug; add hash and __eq__ to UUID
2018-11-26 21:09:17 -05:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
6fb7590280
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-11-26 10:16:29 -05:00
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel
2018-11-23 14:22:07 -08:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
52fd151c9c
ports/nrf: enable json module on nrf boards generally
2018-11-22 10:35:57 -06:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
5fe746f643
Latest Feather nRF52840 pin revisions
2018-11-21 19:46:49 -05:00
1763ffe245
More UUID work; use mp_raise for exceptions
2018-11-20 23:04:58 -05:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
31cc71f7fb
WIP: bleio revisions
2018-11-20 09:36:45 -05:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
b67c53edfa
Factor out of external flash as well.
...
Plus some cleanup.
Fixes #1324
2018-11-14 18:30:47 -08:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
47212ee31e
start debug
2018-11-14 17:21:48 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
64d457dad9
bring bleio PR up to date
2018-11-07 14:12:22 -05:00
f24c225664
Merge pull request #1312 from dhalbert/adafruit_nrfx
...
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-11-04 11:42:12 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
e203ce9ce5
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-10-31 23:18:59 -04:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
Dan Halbert
hathach
Jerry Needell
Limor "Ladyada" Fried
Scott Shawcroft
ShawnHymel
jimblom
sabas1080
Jeff Epler
Benjamin Shockley
Noralf Trønnes
Scott Shawcroft
ATMakersBill
Bryan Siepert