6ebb911a4d
pre-commit formatting fix
2023-02-13 21:06:47 -05:00
09ccf2988d
Replace bitwise or with boolean or
2023-02-13 21:04:11 -05:00
39d3d97ea4
Remove unnecessary memory barriers
2023-02-13 19:46:35 -05:00
dcb6955fa5
use boolean and symbols
2023-02-13 14:58:37 -05:00
791aefd388
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:54 -05:00
575f177dd0
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:46 -05:00
1679790481
Tweaked to run without delays on zero w
2023-02-11 20:21:25 -05:00
359a27e166
Pre-commit is stubborn
2023-02-11 12:19:21 -05:00
2104708c58
missed a trailing space
2023-02-11 12:17:55 -05:00
f29cd4a836
Pre-commit fix trim trailing whitespace
2023-02-11 12:13:34 -05:00
a462a316bd
Fix pre-commit formatting
2023-02-11 12:10:03 -05:00
a2bbca1428
Broadcom Raspberry Pi Zero2W neopixel timing fix
...
These changes result in working neopixel functionality. I've tested on
both the zero2w and the pi4b (The 4b didn't exhibit the original issue)
and the boards now behave properly with 1 to 30 pixels and the board hanging
no longer occurs.
Remove mod that didn't help during testing
Restoring back to original structure
Replace 2 microsecond delay w/deterministic loop
Remove unneded check for empty queue
Put transmit delay outside loop so Queue is used
Make sure last transmission is complete
2023-02-11 11:38:11 -05:00
2a2f94df15
Update tinyusb for zero support
2022-01-06 08:52:33 -08:00
756b9f6dfa
Initial Pi Zero support
...
Both SD card and USB don't work. REPL works over UART.
Progress on #5631
2021-12-30 18:32:59 -08:00
5e4cb4f1e2
Yes, index is unused. That's ok.
2021-12-15 13:46:31 -08:00
2693e2ce0a
Add neopixel support on PWM capable pins
...
It'll be hard to do PWM from them concurrently
Fixes #5697
2021-12-14 16:59:53 -08:00
RetiredWizard
Scott Shawcroft