55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
844c20106b
Turn off `micropython.mem_info` on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
a14762a16c
Add support for rendering a shape.
...
Fixes #1171
2019-01-14 17:29:15 -08:00
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
6eecf96710
Use correct SERCOM for SDA/SCL on Grand Central
2019-01-11 19:06:46 -05:00
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
0599fbf7d8
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2019-01-08 16:40:12 -05:00
a00420bafd
Added pinout for SparkFun SAMD21 Mini Breakout on README.
2019-01-07 17:26:38 -06:00
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
180c7b4b79
Trying iframe in rst again^3.
2019-01-07 16:35:47 -06:00
4d3ae04e2b
Trying iframe in rst again again.
2019-01-07 16:31:52 -06:00
04b9a789ff
Trying iframe in rst again.
2019-01-07 16:28:14 -06:00
2df3e7b0fc
Updated README with embedded spreadsheet
2019-01-07 16:25:34 -06:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
bbf8334166
Fix build without network code
2018-10-25 13:14:27 +11:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
dc9d338612
Merge pull request #1167 from notro/cpython_stdlib
...
Support CPython standard library
2018-10-24 12:57:41 -07:00
d882ff6328
samd51: Set stack size to 8k
...
This is necessary in order to run unittest.
Heavy tests like those in the stdlib need 12-14k.
2018-10-24 19:33:01 +02:00
1b86e5fc83
samd51: Enable functionality to support CPython stdlib
...
This enables various things in order to support the CPython standard library.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED:
Support NotImplemented for easy conversion of stdlib.
It doesn't do fallbacks though, only raises TypeError.
MICROPY_PY_COLLECTIONS_ORDEREDDICT:
collections.OrderedDict
MICROPY_PY_FUNCTION_ATTRS:
Support function.__name__ for use as key in the function attribute workaround.
MICROPY_PY_IO:
uio module: BytesIO, FileIO, StringIO, TextIOWrapper
Also add 'io' alias.
MICROPY_PY_REVERSE_SPECIAL_METHODS:
Support the __r*__ special methods.
MICROPY_PY_SYS_EXC_INFO:
sys.exc_info() used by unittest when collecting exceptions.
MICROPY_CPYTHON_COMPAT:
Some of the things it adds:
>>> object.__init__
<function>
>>> object.__new__
<function>
>>> object.__class__
<class 'type'>
>>> object().__class__
<class 'object'>
>>> object.__name__
'object'
>>> 'Hello'.encode()
b'Hello'
>>> b'Hello'.decode()
'Hello'
Named tuple field names from string:
namedtuple('Point', 'x y')
2018-10-24 19:33:01 +02:00
cec9a69a15
samd51: Make errno, os, and time module aliases
...
Add alias for uerrno so the user doesn't have to know about the
CircuitPython special names for the module.
Make os and time weak modules (aliases) making it possible to add
functionality to those modules written in python.
Example:
'import os' will now look in the path for an os module and if not found
it will import the builtin module. An os module written in python will
import the builtin module through its name prefixed with an underscore
(_os) following the C module naming practice in CPython.
Also right align the macro values to increase readability making it
easier to compare the values for samd21 and samd51. Even the longest
macro from py/mpconfig.h will fit with this alignment.
2018-10-24 19:31:53 +02:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
298756eef8
Merge pull request #1280 from tannewt/precondition_dac
...
Ramp values to and from a default value while active.
2018-10-17 15:00:11 -04:00
4eb1fe18e5
Tweaks from feedback:
...
* default_value is now quiescent_value
* Use step = -step format for sign switch
* Add note about analogout_reset being empty
2018-10-17 11:31:08 -07:00
c209165d43
Ramp values to and from a default value while active.
...
This reduces the popping sound on initial playback of an audio
sample.
The M4 DAC has a pop on startup that cannot be prevented. It also
does not allow readback so current values of the DAC are ignored.
Fixes #1090
2018-10-16 16:23:29 -07:00
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
a15f3361aa
add mechanism for timer ticks in NICs
2018-10-16 23:09:25 +11:00
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
aab28748bb
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-11 14:19:10 +11:00
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master
...
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
2018-10-09 23:58:43 -07:00
9f94712ad1
replacing change to input() with separate method to check for USB Serial input
2018-10-09 18:37:52 -04:00
a60700b1c5
Get DHCP working ...
2018-10-09 16:28:30 +11:00
6e624b9c6a
Split wiznet.WIZNET5K off into its own file
2018-10-09 13:05:58 +11:00
2b0356c61f
Disable framebuf by default on express builds.
2018-10-05 15:19:09 -07:00
76008ce304
Introduce audioio.Mixer which can mix multiple audio samples
...
to produce a single sample.
Only works with 16 bit samples on the M4.
Fixes #987
2018-10-05 15:12:23 -07:00
091c5106ef
Cleanup Files
2018-10-04 21:26:28 -05:00
62d316bffb
W25Q16JV IQ and IM
...
Indicate the differences between IQ and IM with the 2 MiB version of the W25Q chip.
2018-10-04 21:26:05 -05:00
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
f6b9f101dc
Added W25Q16JV_IM
...
Added new flash module: W25Q16JV_IM
2018-10-04 21:13:05 -05:00
15b59bee1b
change initialization method + mod_network names
2018-10-04 22:31:47 +10:00
f9bda0ff93
Makefile & mpconfigport for atmel-samd with wiznet
2018-10-04 22:02:25 +10:00
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
a9d094ab74
Fix translations
2018-09-21 12:24:04 -04:00
e5274959f2
Merge remote-tracking branch 'adafruit/3.x' into merge_3x
2018-09-21 12:22:26 -04:00
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
655f223916
Clock the SAMD21 much faster so it can actually convert at its max
...
sample rate of 350ksps.
Also added an error check of sample rate.
Fixes #1196
2018-09-18 15:29:46 -07:00
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
2dd9407f21
Merge pull request #1186 from dhalbert/uart-enhancements
...
UART enhancements
2018-09-12 16:23:28 -07:00
f21cf15c38
Add OnDiskBitmap which loads pixel data straight from disk.
...
Also, renamed Sprite's palette to pixel_shader so it can be
anything that produces colors based on values (including color values).
Added a ColorConverter that converts RGB888 (found in bitmaps) to
RGB565 for the display.
Fixes #1182
2018-09-12 15:25:59 -07:00
6a046f55c4
UART fixes and enhancements; default board object fix
2018-09-12 17:19:43 -04:00
sommersoft
Dan Halbert
Scott Shawcroft
TG-Techie
Max Holliday
Scott Shawcroft
Elias Santistevan
ShawnHymel
Roy Hooper
ladyada
TG-Techie
sabas1080
Jeff Epler
Benjamin Shockley
Noralf Trønnes
ATMakersBill
Bryan Siepert
Nick Moore
Paul Sajna
Pierrick C