Dan Halbert
6001b64a8a
Fix status DotStar writing
2019-09-01 23:50:21 -04:00
C47D
40fbac13cd
[rgb status] Adjust to current brightness
2019-07-08 22:06:43 -05:00
C47D
324cbe4327
[rgb status] Also invert the pwm values on clear_temp_status
2019-07-07 21:15:51 -05:00
C47D
fae1039401
[rgb led status] Add CP_RGB_STATUS_PWM_INVERTED symbol to invert pwm signals.
2019-07-06 16:50:48 -05:00
Scott Shawcroft
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
Carlos
9de46f3edd
[supervisor/shared/rgb_led_status.c] Initial support for RGB led as Status
2019-06-04 21:22:38 -05:00
Terri Oda
a9b05d37d7
Make status light flash blue for incompatible mpy ( fixes #1369 )
2019-05-08 11:54:08 -07:00
Scott Shawcroft
503642e794
Make status LED brightness change immediate.
...
Fixes #1516
2019-03-26 16:43:35 -07:00
Dan Halbert
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
Scott Shawcroft
168aa394db
Move pin struct to the peripherals library.
...
Its slimmed down by removing the qstr and bit packing TCC info.
The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
2018-08-02 13:59:05 -07:00
Scott Shawcroft
fd71e56891
atmel-samd: Re-org helper peripheral files into their own subdirectory.
...
Ideally in the future they won't depend on ASF4 or MicroPython.
2018-06-01 15:07:31 -07:00
Scott Shawcroft
5f9b3f2b87
Fix the status neopixel flashing.
...
We were storing the wrong current color.
2018-04-12 13:33:58 -07:00
Bryan Siepert
942b7ffbe0
fixes hardware dotstar support for 3.0 and addresses issue #514
2018-03-08 20:39:47 -08:00
Scott Shawcroft
bf05183158
Merge remote-tracking branch 'adafruit/2.x' into merge_2x
2018-02-27 15:24:16 -08:00
mrmcwethy
a38d8948b3
M4 status LED flashing with no main.py present #447 Initialized stack variable
2017-11-22 22:57:50 -08:00
Scott Shawcroft
3177e10e9e
atmel-samd: Add samd21 neopixel support.
...
Also, fix and enable the status neopixel.
Fixes #264
2017-10-31 22:38:09 -07:00
Scott Shawcroft
6839fff313
Move to ASF4 and introduce SAMD51 support. ( #258 )
...
* atmel-samd: Remove ASF3. This will break builds.
* atmel-samd: Add ASF4 for the SAMD21 and SAMD51.
* Introduce the supervisor concept to facilitate porting.
The supervisor is the code which runs individual MicroPython VMs. By
splitting it out we make it more consistent and easier to find.
This also adds very basic SAMD21 and SAMD51 support using the
supervisor. Only the REPL currently works.
This begins the work for #178 .
2017-09-22 21:05:51 -04:00
