Scott Shawcroft
b81573d439
Merge pull request #4891 from dhalbert/keypad-scanning-events
...
keypad: support for vector and matrix key scanning
2021-06-24 10:25:21 -07:00
Dan Halbert
db297add67
fix other too-big builds
2021-06-18 13:20:31 -04:00
Jeff Epler
e1d7e46e88
fix keyboard interrupt
2021-06-18 11:15:51 -05:00
Dan Halbert
4655a71793
Turn off keypad on some builds to avoid overflow
2021-06-15 14:11:04 -04:00
Dan Halbert
f97e0ec631
fix ulab commit
2021-06-15 11:51:28 -04:00
Dan Halbert
a192f1ca2f
merge from upstream
2021-06-15 11:21:08 -04:00
Jeff Epler
1a06d06468
ulab: disable on several stm boards with constrained flash storage
2021-06-11 07:46:21 -05:00
Dan Halbert
b815164bdf
Turn off keypad on a few small builds
2021-06-10 10:09:55 -04:00
Jeff Epler
49db85cb3d
Check that select firmwares build on Windows with MSYS2
...
This configuration is used by @ladyada and more often than it should
we've discovered late that a change introduced problems building
there.
By adding this to regular CI, hopefully we learn about and fix these
issues sooner rather than later.
2021-05-28 16:47:29 -05:00
Scott Shawcroft
561ffec693
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 13:46:42 -07:00
Scott Shawcroft
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
Scott Shawcroft
b78e9fcd19
Improve STM reset reason
...
This causes safe mode to skip the wait for reset when waking up
from an alarm. (It also means we don't flash the LED for it.)
2021-05-19 11:48:02 -07:00
Lucian Copeland
bce541dcc5
Minor text fixes
2021-05-18 15:16:25 -04:00
Lucian Copeland
633d83cc3e
Merge remote-tracking branch 'upstream/main' into sleep-revamp
2021-05-17 18:57:10 -04:00
Lucian Copeland
715f7ee490
Add STM32 and NRF52 compatibility
2021-05-14 14:34:35 -04:00
Scott Shawcroft
689ec86225
Merge pull request #4754 from dhalbert/fix-endpoint-checking
...
Fix endpoint checking; Clean up safe mode printing
2021-05-14 11:25:01 -07:00
Dan Halbert
c65986f526
shrink a bit more
2021-05-14 09:18:14 -04:00
Dan Halbert
0fcb11b7b2
shrink some STM32F4 builds: turn MIDI back off
2021-05-13 23:14:12 -04:00
Dan Halbert
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
Scott Shawcroft
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
Scott Shawcroft
35ee4add63
Merge pull request #4388 from hierophect/stm-alarm
...
STM32: Alarms and sleep
2021-05-13 10:27:51 -07:00
Lucian Copeland
849e3a7319
Style fixes, submodules
2021-05-13 11:24:27 -04:00
Lucian Copeland
525b34b042
Fix formatting and broken links
...
Implmements missed pre-commit changes for all files, and fixes links broken by
cleanup in #4698
2021-05-10 18:04:43 -04:00
Lucian Copeland
0d3c5222d8
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-05-10 17:30:33 -04:00
Kattni Rembor
294ef59f27
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
Jeff Epler
446169e078
Merge pull request #4720 from tannewt/merge_1.13
...
Merge in MicroPython 1.13
2021-05-08 08:46:03 -05:00
Lucian Copeland
9920741c2f
Merge remote-tracking branch 'upstream/main' into stm-espr-pico-fix
2021-05-06 17:43:38 -04:00
Scott Shawcroft
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
Lucian Copeland
80a459d1f8
Remove settings for DNP oscillator
2021-05-06 13:52:07 -04:00
Dan Halbert
843598ec3a
fix more board builds
2021-05-05 18:44:27 -04:00
Scott Shawcroft
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
Dan Halbert
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
Dan Halbert
94ed5e0048
Merge pull request #4696 from dhalbert/no-pulseio-on-small-boards
...
Include pulseio only on CIRCUITPY_FULL_BUILD
2021-05-03 09:35:29 -04:00
Dan Halbert
e475dc8899
Fix broken builds
2021-05-03 00:09:15 -04:00
Jeff Epler
e95e921ca1
codeformat: Fix filename matching
...
In #4683 , tannewt noticed that uncrustify was not running on some
file in common-hal.
I investigated and found that it was not being run on a bunch of paths.
Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.
I spot-checked some specific filenames after this change, and all looks good:
```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.
Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```
As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
Lucian Copeland
07b86fcb76
fix sleepmemory object redefine error
2021-04-29 17:28:06 -04:00
Lucian Copeland
bab5a22f0c
Fix build issues
...
H7 compatibility problems in port.c and peripherals/exti
NRF build failures due to new use of const for PinAlarm pin objects
Isolated board flash overage on blackpill_with_flash, remove audio modules
2021-04-29 14:48:16 -04:00
Dan Halbert
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
Lucian Copeland
9fe8d61656
Fix broken MP macros from 1.11 merge
2021-04-28 18:26:52 -04:00
Lucian Copeland
9feef41c82
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-04-28 15:10:55 -04:00
Scott Shawcroft
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
Scott Shawcroft
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
Dan Halbert
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
Artyom Skrobov
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
Dan Halbert
64e0958916
wip: descriptor building
2021-04-21 23:25:36 -04:00
Lucian Copeland
8ce89860e6
Pass pre-commit formatting
2021-04-21 17:34:13 -04:00
Lucian Copeland
e0024c70de
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-04-15 16:32:30 -04:00
Artyom Skrobov
92d7f31046
[synthio] disable in stm32f411ce_blackpill_with_flash
...
region `FLASH_FIRMWARE' overflowed by 228 bytes
2021-04-13 03:01:55 -04:00
Kevin Lutzer
4fb3139273
switch orders the flash memory is listed
2021-04-08 21:56:25 -06:00
Kevin Lutzer
c672b33770
add W25Q64JVxQ as a supported flash for stm32f411 black pill
2021-04-08 21:53:38 -06:00
Artyom Skrobov
4ee781227f
[meowbit] change board.BUZZ type to PWMAudioOut,
...
as advised in #4257
2021-04-03 13:35:19 -04:00
Lucian Copeland
8a2143f161
Clean up comments and debugging pins
2021-04-02 17:40:40 -04:00
Lucian Copeland
9240146b22
Make light sleep store true alarm object to global map
2021-04-02 16:58:42 -04:00
Lucian Copeland
66a1583183
Implement fake and true deep sleep alarm differentiation
2021-04-02 15:13:10 -04:00
Lucian Copeland
17585e1e07
Clean up API
2021-04-02 14:08:48 -04:00
Lucian Copeland
91e530d36c
Resolve wake alarm crash
2021-04-02 13:42:22 -04:00
Lucian Copeland
4f52554eb3
Fix to RTC reset
2021-04-01 20:53:25 -04:00
Lucian Copeland
d35a307ffa
Merge branch 'sleep-api-update' into stm-alarm
2021-03-29 12:27:25 -04:00
Lucian Copeland
529fb52309
Style changes and wakeup detection
2021-03-27 13:16:12 -04:00
Artyom Skrobov
b40d072648
[stm] implementation of audiopwmio
...
Based on nrf PWMAudioOut by @jepler and stm PulseOut by @hierophect
Tested on a Meowbit
2021-03-26 13:18:01 -04:00
Scott Shawcroft
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
Lucian Copeland
d8a2d69e10
Working deep sleep via RTC reset, with debug pins
2021-03-21 13:15:44 -04:00
Dan Halbert
d7a2ae9df7
fix stm compiler error
2021-03-19 11:04:46 -04:00
Dan Halbert
b2d913412f
merge from upstream
2021-03-18 23:14:43 -04:00
gamblor21
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
gamblor21
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
Mark
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
microDev
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
gamblor21
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
Lucian Copeland
6b2c9985ff
Extract RTC, implement fake RTC deepsleep
2021-03-11 17:50:05 -05:00
Scott Shawcroft
0e451a1681
Merge pull request #4383 from hierophect/stm32-uart-dereserve
...
STM32: Fix UART deinit
2021-03-11 10:48:01 -08:00
Lucian Copeland
0b73c7a212
Update F407 to match F405
2021-03-11 11:27:17 -05:00
Lucian Copeland
1ebbd14d0f
Fix UART deinit
2021-03-11 11:02:13 -05:00
Dan Halbert
08c5dbb003
use return values in STM PWMOut constructor, not exceptions
2021-03-11 08:52:47 -05:00
Jeff Epler
cdb0fda72a
Merge remote-tracking branch 'origin/main' into count-flash-devices
2021-03-07 20:26:04 -06:00
Jeff Epler
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
jerryneedell
a23129bc49
add GD25Q16C flash to BlackPill
2021-03-07 17:23:39 +00:00
Artyom Skrobov
4720dc179a
[stm] curr_pulseout can be STATIC
...
Not used outside of PulseOut.c
2021-03-05 12:52:13 +02:00
Jeff Epler
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
Lucian Copeland
f1792c8474
Extract EXTI, create base sleep framework
2021-03-02 11:41:53 -05:00
Jeff Epler
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
Kevin Matocha
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
Dan Halbert
67406488d1
merge from upstream; re-alphabetize
2021-02-19 14:22:50 -05:00
Dan Halbert
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
Jeff Epler
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
Dan Halbert
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
Lucian Copeland
edb7f2d807
Free up space for JA build
2021-02-11 16:30:27 -05:00
Lucian Copeland
d00bee2149
Fix I2C Repeated start error by converting to IT mode
2021-02-10 14:59:19 -05:00
Dan Halbert
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
Dan Halbert
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
Scott Shawcroft
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
Dan Halbert
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
Jonathan Giles
55c6d3e92f
1. Rename 'stm32f411ce_blackpill_haxpress' to 'stm32f411ce_blackpill_with_flash'
...
2. Add 'W25Q64JV_IQ' to flash chip list (as per commercial version)
2021-01-19 11:48:15 -05:00
djix123
b4bdf55eda
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.mk
...
Update PID for _with_flash version to resolve duplicate PID issue
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:35:52 -05:00
djix123
4804032f09
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.mk
...
Change name from _haxpress to _with_flash
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:35:03 -05:00
djix123
c8046af6e7
Update ports/stm/boards/stm32f411ce_blackpill_haxpress/mpconfigboard.h
...
Change name from _haxpress to _with_flash
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-01-19 11:34:47 -05:00
Jonathan Giles
ebb4df846f
Add support for a 'haxpress' external SPI flash build for the stm32f411ce blackpill board
2021-01-19 07:46:59 -05:00
gamblor21
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
microDev
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
Jonathan Giles
aaa3c61819
Add default I2C pins for STM32F411CE
2020-12-22 09:11:05 -05:00
