Commit Graph

164 Commits

Author SHA1 Message Date
iabdalkader 449be91e1a stm32/Makefile: Include HAL HSEM driver on H747 MCUs. 2023-03-08 00:55:01 +11:00
Jim Mussared bad0098a49 stm32: Update to use the open-source lib version of cyw43-driver.
This removes the previous WiFi driver from drivers/cyw43 (but leaves behind
the BT driver), and makes the stm32 port (i.e. PYBD and Portenta) use the
new "lib/cyw43-driver" open-source driver already in use by the rp2 port.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:27:12 +11:00
Damien George 8d9a7fd228 stm32/Makefile: Clean up nested if-else to chained if-else-if.
Makefile's support "else ifdef", so use it to make the logic clearer.

Also dedent some associated lines for consistency.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 10:14:04 +11:00
Jim Mussared 69b93527d5 ports: Make BOARD default from BOARD_DIR in Makefile's.
This allows:

    $ make BOARD_DIR=path/to/board

to infer BOARD=board, rather than the previous behavior that required
additionally setting BOARD explicitly.

Also makes the same change for VARIANT_DIR -> VARIANT on Unix.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 09:47:08 +11:00
David Lechner 3446d440f6 shared/runtime/gchelper: Drop cpu directive from ARM asm helpers.
This drops the `.cpu` directive from the ARM gchelper_*.s files.  Having
this directive breaks the linker when targeting older CPUs (e.g. `-mthumb
-mthumb-interwork` for `-mcpu=arm7tdmi`).  The actual target CPU should be
determined by the compiler options.

The exact CPU doesn't actually matter, but rather the supported assembly
instruction set.  So the files are renamed to *_thumb1.s and *thumb2.s to
indicate the instruction set support instead of the CPU support.

Signed-off-by: David Lechner <david@pybricks.com>
2023-01-28 15:51:38 +11:00
iabdalkader 3b5cafc716 stm32/Makefile: Leave DFU mode after download when using dfu-util.
Not all DFU bootloaders exit after download, this modifier is required for
some boards to reset, otherwise they sit idle in DFU mode.
2023-01-19 16:23:22 +11:00
Jim Mussared 5ef3aec33c stm32/Makefile: Set MPY_CROSS_FLAGS based on MCU type.
Previously it was hardcoded to armv7m, which would have failed on M0/M0+.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-11-17 22:10:41 +11:00
iabdalkader 71881116e6 extmod/extmod.mk: Set default mbedtls config file in extmod Makefile. 2022-11-09 18:43:13 +01:00
iabdalkader d2c2846820 stm32/Makefile: Allow overriding the default MBEDTLS_CONFIG_FILE. 2022-11-08 23:43:43 +11:00
Damien George cd35b8a2a3 extmod/machine_timer: Move stm32's implementation of machine.Timer here.
So it can be reused by other ports.

Signed-off-by: Damien George <damien@micropython.org>
2022-10-27 14:32:43 +11:00
Jim Mussared d6d8722558 extmod: Make extmod.mk self-contained.
This makes it so that all a port needs to do is set the relevant variables
and "include extmod.mk" and doesn't need to worry about adding anything to
OBJ, CFLAGS, SRC_QSTR, etc.

Make all extmod variables (src, flags, etc) private to extmod.mk.

Also move common/shared, extmod-related fragments (e.g. wiznet, cyw43,
bluetooth) into extmod.mk.

Now that SRC_MOD, CFLAGS_MOD, CXXFLAGS_MOD are unused by both extmod.mk
(and user-C-modules in a previous commit), remove all uses of them from
port makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:31:49 +11:00
Jim Mussared 87011f6353 extmod/extmod.mk: Make extmod.mk handle GIT_SUBMODULES.
This applies to nimble, btstack, axtls, mbedtls, lwip.

Rather than having the ports individually manage GIT_SUBMODULES for these
components, make extmod.mk append them when the relevant feature is
enabled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:29:09 +11:00
Jim Mussared 3cc6decfc4 py/py.mk: Make user-C-module handling self-contained in py.mk.
Removes the need for the port to add anything to OBJS or SRC_QSTR.

Also makes it possible for user-C-modules to differentiate between code
that should be processed for QSTR vs other files (e.g. helpers and
libraries).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:23:18 +11:00
Jim Mussared 67d05ed02b ports: Make generated pin.c handling more consistent across ports.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:18:46 +11:00
Jim Mussared 17f2783e4a all: Use += rather than = everywhere for CFLAGS/LDFLAGS/LIBS.
This avoids a surprise where an = can cancel out an earlier +=.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:17:41 +11:00
yn386 427d72667f stm32: Add support for STM32L1 MCUs.
This change adds STM32L1 support to the STM32 port.
2022-09-25 23:56:41 +10:00
Damien George 1855df6361 stm32: Remove support for CC3000 WiFi driver.
It has been about 8 years since support for this chip was added.  Reasons
to remove it are:
- It is no longer easy to obtain this part.
- There are now many other options for WiFi.
- It's not a good use of developer time to maintain it.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-26 12:51:37 +10:00
Jim Mussared 492ba5eaf2 stm32: Move board variant config to mpconfigboard.mk.
Rather than having the autobuild know about the particular variants, have
the mpconfigboard.mk describe them and make autobuild discover them
automatically.

Adds a "query-variants" target to stm32/Makefile to allow the set of
possible variants to be queried.

Removes pybv3 from the autobuild as this isn't use by the downloads page.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 09:38:38 +10:00
robert-hh 717924001d stm32: Switch Wiznet to use lib/wiznet5k and extmod/network_wiznet5k.
Instead of the old Wiznet driver in drivers/wiznet5k.
2022-08-23 14:57:54 +10:00
Angus Gratton a16a330da5 nrf,stm32: Don't enable debug info by default if LTO is on.
It seems sometimes gcc with LTO will generate otherwise valid assembly
listings that cause 'as' to error out when generating DWARF debug info; see
https://sourceware.org/bugzilla/show_bug.cgi?id=29494

Therefore, don't enable -g by default if LTO is on.

Enabling LTO=1 DEBUG=1 is still possible but may result in random errors
at link time due to 'as' (the error in this case is "Error: unaligned
opcodes detected in executable segment", and the only other easy workaround
is CFLAGS+=-fno-jump-tables which may increase code size significantly).

Follows on from fdfe4eca74
2022-08-15 22:55:34 +10:00
Angus Gratton fdfe4eca74 ports: Always include debug information in the ELF.
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size.  However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.

Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
2022-07-29 11:24:00 +10:00
robert-hh c781899438 stm32/softtimer: Switch to use softtimer code from shared/runtime. 2022-07-19 12:33:19 +10:00
Damien George b89422ceaa extmod: Always use custom mbedtls error message code.
All ports that use mbedtls use the custom error messages in
mp_mbedtls_errors.c.  This commit simplifies the build so that ports don't
need to explicitly add this file, it's now used by default when mbedtls is
enabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 22:55:22 +10:00
Angus Gratton 1d23c01dd6 stm32/Makefile: Workaround LTO linker order bug in binutils <2.35.
Assembly files with weak symbols need to be linked first to avoid issues
with the weak symbols being incorrectly linked instead of strong ones.

See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83967 and
https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966

This is the workaround suggested in comment 10 of the gcc-arm-embedded bug.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2022-07-18 16:12:08 +10:00
Jim Mussared 6519b1b95e stm32/Makefile: Fix setting of define that enables WIZNET5K driver.
Commit 9670a156da missed one renaming of
MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K which prevented the
Wiznet interface from being enabled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-02 00:21:36 +10:00
Angus Gratton e76d88b531 stm32/Makefile: Enable link-time-optimisation via LTO=1 make option.
When tested, this reduces default MP binary sizes by approx 2-2.5%, and
very marginally increases performance in benchmarks. Build times seem very
similar to non-LTO when using gcc 12.

See #8733 for further discussion.

Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:31:32 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George 1842efbdd9 stm32/Makefile: Set CSUPEROPT to -Os for F0 and G0 MCUs to save space.
Saves 1804 bytes on NUCLEO_F091RC, and 1080 bytes on NUCLEO_G0B1RE.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
Damien George 9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Asensio Lorenzo Sempere 010012c7c3 stm32: Add support for G0 MCUs.
This commit adds support for the STM32G0 series of MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
iabdalkader 014912daae stm32/ulpi: Add USB3320 ULPI low-power functions.
This driver allows switching USB3320 ULPI to low-power mode.  It is ported/
adapted from ST code, stm32f7xx_lp_modes.c, which is BSD-3 licensed code.
2022-04-26 23:11:50 +10:00
iabdalkader 7b3adb5ce5 stm32/Makefile: Add H747 to Makefile's MCU flags. 2022-04-11 16:12:50 +10:00
Andrew Leech 8db93dc016 stm32/Makefile: Allow overriding COPT in Makefile.
It can now be set in mpconfigboard.mk (as well as the make command line).
2022-04-04 23:12:15 +10:00
Damien George 11b77263ef stm32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George e0a0719416 stm32: Add initial support for STM32WL MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Damien George 9127e63708 stm32/Makefile: Make stm32lib configurable.
The default stm32lib remains lib/stm32lib, but it can now be easily
overriden at build time by specifying STM32LIB_DIR, or STM32LIB_CMSIS_DIR
and STM32LIB_HAL_DIR.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Herwin Grobben 8f68e26f79 stm32: Add support for G4 MCUs, and add NUCLEO_G474RE board defn.
This commit adds support for the STM32G4 series of MCUs, and a board
definition for NUCLEO_G474RE.  This board has the REPL on LPUART1 which is
connected to the on-board ST-link USB-UART.
2022-02-01 16:21:01 +11:00
Jim Mussared 92353c2911 all: Remove support for FROZEN_DIR and FROZEN_MPY_DIR.
These have been deprecated for over two years in favour of FROZEN_MANIFEST
and manifest.py.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-17 23:54:05 +11:00
Damien George 88ac5a3116 stm32: Update L4 code to build with latest stm32lib and L4 HAL 1.17.0.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Damien George 0c9f5b388e stm32: Include HAL MMC code in F4 builds.
So that the MMC driver can be used on F4 MCUs.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-30 10:21:18 +11:00
Jan Staal 9e2423e730 stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
This commit is based upon prior work of @dpgeorge and @koendv.

MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)

Support has been added for the STM32H7B3I_DK board.

Signed-off-by: Jan Staal <info@janstaal.com>
2021-09-16 12:29:28 +10:00
Jan Hrudka d451dc0086 stm32: Add basic support for STM32H750. 2021-09-15 10:42:20 +10:00
iabdalkader 7aab0dc5d8 extmod: Move modnetwork and modusocket from stm32 to extmod.
So they can be used by other ports.
2021-09-15 01:25:12 +10:00
Tobias Thyrrestrup 0886bf46ca stm32/Makefile: Allow GIT_SUBMODULES and LIBS to be extended.
Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-08-19 22:56:39 +10:00
Jim Mussared e64cda5295 stm32: Add implementation of machine.bitstream.
Hand-written version for M0, and cycle-counter version for everything else.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Damien George f834fef6bb stm32/powerctrl: Support changing frequency on WB MCUs.
This allows changing the frequency to: 100kHz, 200kHz, 400kHz, 800kHz,
1MHz, 2MHz, 4MHz, 8MHz, 16MHz, 32MHz, 64MHz.  For frequencies 2MHz and
below, low power run (LPR) mode is enabled automatically.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:41:20 +10:00
Damien George 96c6b8cae3 ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID.
For consistency with other board-level config macros that begin with
MICROPY_HW_USB.

Also allow boards in the mimxrt, nrf and samd ports to configure these
values.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:55 +10:00
Tobias Thyrrestrup 60e3e51753 stm32/Makefile: Update to only pull in used Bluetooth library. 2021-07-31 15:11:46 +10:00
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George 132d93886f ports: Use common mp_hal_stdout_tx_strn_cooked instead of custom one.
To reduce code duplication.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-08 12:59:31 +10:00