Commit Graph

166 Commits

Author SHA1 Message Date
Damien George ebacdfabb6 stm32/machine_adc: Add machine.ADC class. 2019-09-04 15:40:24 +10:00
Damien George 59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George 64aebca155 stm32/Makefile: Allow a board to disable float support.
By using "MICROPY_FLOAT_IMPL = none" in its mpconfigboard.mk file.
2019-07-16 14:47:32 +10:00
Damien George 4c1ad1f691 stm32: Add support for USB on L0 MCUs. 2019-07-16 14:45:53 +10:00
Damien George 5fd62c8992 stm32: Remove SystemInit funcs, use stm32lib versions instead.
stm32lib now provides system_stm32XXxx.c source files for all MCU variants,
which includes SystemInit and prescaler tables.  Since these are quite
standard and don't need to be changed, switch to use them instead of custom
variants, making the start-up code cleaner.

The SystemInit code in stm32lib was checked and is equivalent to what is
removed from the stm32 port in this commit.
2019-07-08 15:23:53 +10:00
Damien George 21ecf8be5f stm32/powerctrl: Move L0's SystemClock_Config to powerctrlboot.c file. 2019-07-08 15:23:53 +10:00
Damien George 23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George 6b6403ce76 stm32/Makefile: Use startup_stm32*.s file from stm32lib.
This means that each MCU now gets a unique IRQ table, eg a specific one for
STM32F405, STM32F411, etc rather than just STM32F4xx.
2019-07-03 23:42:36 +10:00
Damien George 241e577753 stm32/Makefile: Remove Wno-attributes for ll_usb HAL file.
This HAL file is now patched so it doesn't have these warnings.
2019-07-03 23:41:33 +10:00
Damien George 04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
Damien George 205c6d0dc9 stm32/Makefile: Print info messages about use of mboot/QSPI flash. 2019-06-24 21:59:58 +10:00
Damien George 38bcc99a58 stm32/usbd_msc: Provide Mode Sense response data in MSC interface.
Eventually these responses could be filled in by a function to make their
contents dynamic, depending on the attached logical units.  But for now
they are fixed, and this patch fixes the MODE SENSE(6) responses so it is
the correct length with the correct header.
2019-06-11 15:43:59 +10:00
Damien George 518aa571ab stm32/usbd_msc: Rework USBD MSC code to support multiple logical units.
SCSI can support multiple logical units over the one interface (in this
case over USBD MSC) and here the MSC code is reworked to support this
feature.  At this point only one LU is used and the behaviour is mostly
unchanged from before, except the INQUIRY result is different (it will
report "Flash" for both flash and SD card).
2019-06-11 15:43:15 +10:00
Damien George fed4c23590 stm32: Integrate optional mbedTLS component for ussl module.
To use it a board should define MICROPY_PY_USSL=1 and MICROPY_SSL_MBEDTLS=1
at the Makefile level.  With the provided configuration it adds about 64k
to the build.
2019-06-05 15:37:31 +10:00
Damien George 8b7409c295 stm32: Integrate in the cyw43 driver and network.WLAN class.
Enable it by setting MICROPY_PY_NETWORK_CYW43=1 at the Makefile level.
2019-06-03 17:14:34 +10:00
Damien George 97753a1bbc stm32: Move factory reset files and code to separate source file.
The new function factory_reset_make_files() populates the given filesystem
with the default factory files.  It is defined with weak linkage so it can
be overridden by a board.

This commit also brings some minor user-facing changes:

- boot.py is now no longer created unconditionally if it doesn't exist, it
  is now only created when the filesystem is formatted and the other files
  are populated (so, before, if the user deleted boot.py it would be
  recreated at next boot; now it won't be).

- pybcdc.inf and README.txt are only created if the board has USB, because
  they only really make sense if the filesystem is exposed via USB.
2019-05-07 13:59:51 +10:00
Damien George aa7b32c811 stm32/dac: Rework DAC driver to use direct register access.
This patch makes the DAC driver simpler and removes the need for the ST
HAL.  As part of it, new helper functions are added to the DMA driver,
which also use direct register access instead of the ST HAL.

Main changes to the DAC interface are:

- The DAC uPy object is no longer allocated dynamically on the heap,
  rather it's statically allocated and the same object is retrieved for
  subsequent uses of pyb.DAC(<id>).  This allows to access the DAC objects
  without resetting the DAC peripheral.  It also means that the DAC is only
  reset if explicitly passed initialisation parameters, like "bits" or
  "buffering".

- The DAC.noise() and DAC.triangle() methods now output a signal which is
  full scale (previously it was a fraction of the full output voltage).

- The DAC.write_timed() method is fixed so that it continues in the
  background when another peripheral (eg SPI) uses the DMA (previously the
  DAC would stop if another peripheral finished with the DMA and shut the
  DMA peripheral off completely).

Based on the above, the following backwards incompatibilities are
introduced:

- pyb.DAC(id) will now only reset the DAC the first time it is called,
  whereas previously each call to create a DAC object would reset the DAC.
  To get the old behaviour pass the bits parameter like: pyb.DAC(id, bits).

- DAC.noise() and DAC.triangle() are now full scale.  To get previous
  behaviour (to change the amplitude and offset) write to the DAC_CR (MAMP
  bits) and DAC_DHR12Rx registers manually.
2019-04-24 15:51:19 +10:00
Damien George 7ce2a08231 stm32: Add support for MMC driver, exposed via pyb.MMCard class.
Enable it via MICROPY_HW_ENABLE_MMCARD.
2019-04-01 17:04:43 +11:00
Boris Vinogradov 6947dff7da stm32/Makefile: Allow to override CROSS_COMPILE with included Makefile. 2019-03-29 11:34:05 +11:00
Damien George c7d19dc0ad ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code. 2019-03-14 12:22:49 +11:00
Andrew Leech 89ff506513 py: Update and rework build system for including external C modules.
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
Damien George b5f33ac2cb ports: Update to work with new oofatfs version. 2019-03-05 15:56:39 +11:00
Damien George 78fe979d7d stm32: Use global lwip build config and support building without lwip. 2019-03-04 23:33:02 +11:00
Damien George c8bbf2c170 stm32/Makefile: Allow a board to specify its linker sections for FW.
A board can now use the make variables TEXT0_SECTIONS and TEXT1_SECTIONS to
specify the linker sections that should go in its firmware.  Defaults are
provided which give the existing behaviour.
2019-03-04 22:26:55 +11:00
Damien George c55709bf29 stm32/network_lan: Add high-level network.LAN interface to ETH driver. 2019-02-26 23:32:19 +11:00
Damien George c950a1a35d stm32/eth: Add low-level Ethernet MAC driver. 2019-02-26 23:32:19 +11:00
Damien George 7b2dc96251 stm32/boards/make-pins.py: Add cmdline options to support use by mboot. 2019-02-14 13:35:39 +11:00
Damien George e6d97e8a0b stm32: Move gchelper assembler code to lib/utils for use by other ports. 2019-02-12 14:11:21 +11:00
Tobias Badertscher 372e7a4dc6 stm32: Implement UART.irq() method with initial support for RX idle IRQ. 2018-12-29 17:21:37 +11:00
Damien George a2271532be stm32: Split out UART Python bindings from uart.c to machine_uart.c. 2018-12-10 16:21:50 +11:00
Damien George dff14c740b stm32/powerctrl: Move function to set SYSCLK into new powerctrl file.
Power and clock control is low-level functionality and it makes sense to
have it in a dedicated file, at least so it can be reused by other parts of
the code.
2018-09-24 14:18:18 +10:00
Andrew Leech 84f4d58479 stm32/dcmi: Add F4/F7/H7 hal files and dma definitions for DCMI periph. 2018-09-21 12:12:49 +10:00
Damien George 56f275c0a2 stm32/Makefile: Include copysign.c in double precision float builds.
This is required for DEBUG=1 builds when MICROPY_FLOAT_IMPL=double.

Thanks to Andrew Leech.
2018-09-20 16:51:20 +10:00
Andrew Leech 17f7c683d2 stm32: Add support for STM32F765xx MCUs.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable.  When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
2018-09-20 15:16:03 +10:00
Damien George 47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.
MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.
2018-09-11 16:42:57 +10:00
Andrew Leech 670a2a3396 stm32/Makefile: Allow external BOARD_DIR directory to be specified.
This makes it easy to add a custom board definition outside of the
micropython tree, keeping the micropython submodule clean and official.
2018-09-11 15:15:21 +10:00
Damien George 8300be6d0f stm32/spi: Split out pyb.SPI and machine.SPI bindings to their own files
The aim here is to have spi.c contain the low-level SPI driver which is
independent (not fully but close) of MicroPython objects and methods, and
the higher-level bindings are separated out to pyb_spi.c and machine_spi.c.
2018-08-14 17:11:07 +10:00
Damien George f6f6452b6f stm32/Makefile: Use -Wno-attributes for ll_usb.c HAL source file.
A recent version of arm-none-eabi-gcc (8.2.0) will warn about unused packed
attributes in USB_WritePacket and USB_ReadPacket.  This patch suppresses
such warnings for this file only.
2018-07-30 15:35:05 +10:00
Andrew Leech a1db1506a2 stm32/sdram: Integrate SDRAM driver into rest of code.
If SDRAM is configured and enabled for a board then it is used for the
MicroPython GC heap.
2018-07-23 23:14:23 +10:00
Andrew Leech 4343c9330e stm32: Add method for statically configuring pin alternate function.
Works with pins declared normally in mpconfigboard.h, eg. (pin_XX), as well
as (pyb_pin_XX).

Provides new mp_hal_pin_config_alt_static(pin_obj, mode, pull, fn_type)
function declared in pin_static_af.h to allow configuring pin alternate
functions by name at compile time.
2018-07-20 14:03:21 +10:00
Damien George 5042d98514 stm32/Makefile: Rebuild all qstrs when any board configuration changes. 2018-06-12 13:53:43 +10:00
Damien George 7d86ac6c01 stm32: Add network driver for Wiznet5k using MACRAW mode and lwIP.
The Wiznet5k series of chips support a MACRAW mode which allows the host to
send and receive Ethernet frames directly.  This can be hooked into the
lwIP stack to provide a full "socket" implementation using this Wiznet
Ethernet device.  This patch adds support for this feature.

To enable the feature one must add the following to mpconfigboard.mk, or
mpconfigport.mk:

    MICROPY_PY_WIZNET5K = 5500

and the following to mpconfigboard.h, or mpconfigport.h:

    #define MICROPY_PY_LWIP (1)

After wiring up the module (X5=CS, X4=RST), usage on a pyboard is:

    import time, network
    nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
    nic.active(1)
    while not nic.isconnected():
        time.sleep_ms(50) # needed to poll the NIC
    print(nic.ifconfig())

Then use the socket module as usual.

Compared to using the built-in TCP/IP stack on the Wiznet module, some
performance is lost in MACRAW mode: with a lot of memory allocated to lwIP
buffers, lwIP gives Around 750,000 bytes/sec max TCP download, compared
with 1M/sec when using the TCP/IP stack on the Wiznet module.
2018-06-01 14:21:38 +10:00
Damien George ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George cda964198a stm32: Integrate lwIP as implementation of usocket module.
This patch allows to use lwIP as the implementation of the usocket module,
instead of the existing socket-multiplexer that delegates the entire TCP/IP
layer to the NIC itself.

This is disabled by default, and enabled by defining MICROPY_PY_LWIP to 1.

When enabled, the lwIP TCP/IP stack will be included in the build with
default settings for memory usage and performance (see
lwip_inc/lwipopts.h).  It is then up to a particular NIC to register itself
with lwIP using the standard lwIP netif API.
2018-05-21 17:36:06 +10:00
Damien George aea71dbde0 stm32/Makefile: Use -O2 to optimise compilation of lib/libc/string0.c. 2018-05-04 15:53:51 +10:00
Damien George 19778d0a3c stm32/i2c: Add low-level I2C driver for F7 MCUs. 2018-04-24 23:48:04 +10:00
Damien George b73adcc3d9 stm32: Rename i2c.c to pyb_i2c.c.
i2c.c implements the legacy pyb.I2C class so rename the file to make this
explicit, and also to make room for an improved I2C driver.
2018-04-24 16:23:36 +10:00
Damien George d9e69681f5 stm32: Add custom, optimised Reset_Handler code.
The Reset_Handler needs to copy the data section and zero the BSS, and
these operations should be as optimised as possible to reduce start up
time.  The versions provided in this patch are about 2x faster (on a Cortex
M4) than the previous implementations.
2018-03-29 15:29:23 +11:00
Damien George 04de9e33bc stm32/system_stm32: Set VTOR pointer from TEXT0_ADDR. 2018-03-27 21:32:39 +11:00
Damien George ed75b2655f stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
This patch forces a board to explicitly define TEXT1_ADDR in order to
split the firmware into two separate pieces.  Otherwise the default is now
to produce only a single continuous firmware image with all ISR, text and
data together.
2018-03-27 21:24:15 +11:00
Damien George 95b2cb008e stm32/Makefile: Rename FLASH_ADDR/TEXT_ADDR to TEXT0_ADDR/TEXT1_ADDR.
To make it clearer that these addresses are both for firmware text and that
they have a prescribed ordering.
2018-03-27 21:20:04 +11:00
Damien George 7aec06ca9a stm32/boards: Allow boards to have finer control over the linker script.
This patch allows a particular board to independently specify the linker
scripts for 1) the MCU memory layout; 2) how the different firmware
sections are arranged in memory.  Right now all boards follow the same
layout with two separate firmware section, one for the ISR and one for the
text and data.  This leaves room for storage (filesystem data) to live
between the firmware sections.

The idea with this patch is to accommodate boards that don't have internal
flash storage and only need to have one continuous firmware section.  Thus
the common.ld script is renamed to common_ifs.ld to make explicit that it
is used for cases where the board has internal flash storage.
2018-03-27 21:17:48 +11:00
Damien George b63cc1e9ef stm32/Makefile: Re-enable strict aliasing optimisation for ST HAL files.
The HAL requires strict aliasing optimisation to be turned on to function
correctly (at least for the SD card driver on F4 MCUs).  This optimisation
was recently disabled with the addition of H7 support due to the H7 HAL
having errors with the strict aliasing optimisation enabled.  But this is
now fixed in the latest stm32lib and so the optimisation can now be
re-enabled.

Thanks to @chuckbook for finding that there was a problem with the SD card
on F4 MCUs with the strict aliasing optimisation disabled.
2018-03-26 00:00:47 +11:00
Damien George e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
Damien George 58ebeca6a9 drivers/bus: Pull out software SPI implementation to dedicated driver.
This patch takes the software SPI implementation from extmod/machine_spi.c
and moves it to a dedicated file in drivers/bus/softspi.c.  This allows the
SPI driver to be used independently of the uPy runtime, making it a more
general component.
2018-03-10 00:59:43 +11:00
iabdalkader 66748aaf60 stm32/Makefile: Use separate startup file for each MCU series. 2018-03-09 15:14:17 +11:00
iabdalkader b8d09b9bef stm32/Makefile: Add settings to support H7 MCUs. 2018-03-09 15:09:29 +11:00
Damien George adda38cf76 stm32/qspi: Add hardware QSPI driver, with memory-map capability.
It supports the abstract QSPI protocol defined in drivers/bus/qspi.h.
2018-03-03 00:17:08 +11:00
Damien George 0210383da5 stm32/spibdev: Add option to configure SPI block dev to use QSPI flash.
To use QSPI (in software QSPI mode) the configuration needed is:

    #define MICROPY_HW_SPIFLASH_SIZE_BITS (n * 1024 * 1024)
    #define MICROPY_HW_SPIFLASH_CS      (pin_x1)
    #define MICROPY_HW_SPIFLASH_SCK     (pin_x2)
    #define MICROPY_HW_SPIFLASH_IO0     (pin_x3)
    #define MICROPY_HW_SPIFLASH_IO1     (pin_x4)
    #define MICROPY_HW_SPIFLASH_IO2     (pin_x5)
    #define MICROPY_HW_SPIFLASH_IO3     (pin_x6)
2018-03-02 23:55:45 +11:00
Damien George e6220618ce stm32: Use "GEN" for describing files generated in the build.
Instead of "Create", to match the build output from the py/ core.
2018-02-23 16:27:30 +11:00
Damien George fa13e0d35b stm32: Factor out flash and SPI block-device code to separate files.
Prior to this patch, storage.c was a combination of code that handled
either internal flash or external SPI flash and exposed one of them as a
block device for the local storage.  It was also exposed to the USB MSC.

This patch splits out the flash and SPI code to separate files, which each
provide a general block-device interface (at the C level).  Then storage.c
just picks one of them to use as the local storage medium.  The aim of this
factoring is to allow to add new block devices in the future and allow for
easier configurability.
2018-02-13 22:21:46 +11:00
Damien George 57d2ac1300 stm32/rng: Simplify RNG implementation by accessing raw peripheral regs.
It saves code size and RAM, and is more efficient to execute.
2018-02-02 18:22:57 +11:00
Damien George efdda2c62d stm32: Add support for DHT11/DHT22 sensors. 2018-01-31 18:12:53 +11:00
Damien George e36821a766 stm32/modnwwiznet5k: Add support for W5500 Ethernet chip.
Which Wiznet chip to use is a compile-time option: MICROPY_PY_WIZNET5K
should be set to either 5200 or 5500 to support either one of these
Ethernet chips.  The driver is called network.WIZNET5K in both cases.

Note that this commit introduces a breaking-change at the build level
because previously the valid values for MICROPY_PY_WIZNET5K were 0 and 1
but now they are 0, 5200 and 5500.
2017-10-16 15:36:57 +11:00
Damien George 4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Damien George 01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00