11288c1c28
esp32s2: Add rgbmatrix support
2021-05-26 11:21:59 -05:00
0d7f257eae
displayio: Pause rgbmatrix during soft-reset
...
We can't handle rgbmatrix's interrupts from here until the display is
reinitialized, so set the display as paused.
With this change, I can survive multiple cycles with wifi+rgbmatrix
on an esp32s2. Before, it usually failed.
2021-05-26 11:18:02 -05:00
0f66832829
Merge branch 'main' into hid_devices-gc
2021-05-24 18:17:52 -04:00
0d92558012
Merge pull request #4800 from dhalbert/too-many-hid-devices
...
Handle too many HID devices properly
2021-05-24 14:26:41 -07:00
5a9b95e611
unlock board.I2C() on reset
2021-05-21 17:49:50 -04:00
c6eb0283dc
Don't set num_hid_devices before it's validated
2021-05-21 17:34:30 -04:00
5a81f275cf
Don't change number of HID devices until it's vetted
2021-05-21 17:29:21 -04:00
7d0cda2614
gc all pointers in hid_devices properly
2021-05-21 16:32:55 -04:00
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
aebee2de73
Handle USB_HIGHSPEED for MIDI also
2021-05-19 07:43:47 -04:00
da248d1594
spresense: Fix USB CDC and MSC
2021-05-18 17:02:16 +02:00
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
a70fc0caee
Merge pull request #4744 from tannewt/merge_1.14
...
Merge MicroPython 1.14
2021-05-11 16:11:58 -07:00
e02a26453c
Merge MicroPython 1.14 into CircuitPython
2021-05-11 15:07:40 -07:00
3c8b8cdba7
`make translate`
2021-05-10 16:57:38 -07:00
7cd8e98962
Make two error messages sentence case
2021-05-10 16:51:13 -07:00
f504af3127
fix HID; fix interface name table creation
2021-05-09 00:42:45 -04:00
5e06c91244
Merge pull request #4716 from tyomitch/main
...
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
908d83d1f2
s/Circuit Python/CircuitPython/g
...
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod
2021-05-05 17:51:52 -07:00
adc3d7d55e
update Python API according to review comments
2021-05-03 22:29:02 -04:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
5b5de4b92e
fix sHID report doc and API
2021-05-03 20:53:31 -04:00
b35fa44c8a
Merge MicroPython 1.12 into CircuitPython
2021-05-03 14:01:18 -07:00
be7b2b00a8
uncrustify with newer version of uncrustify
2021-04-30 10:40:12 -04:00
71a8cadb09
working!
2021-04-29 22:26:38 -04:00
abfb020d41
MSC, CDC, HID keyboard definitely working
2021-04-29 17:41:43 -04:00
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
587aedd14f
rework storage allocation
2021-04-28 13:00:44 -04:00
8500e846c6
partially working
2021-04-27 23:53:23 -04:00
f98a54628b
wip: compiles
2021-04-27 14:37:36 -04:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
7a40b4daec
very much WIP
2021-04-26 23:54:01 -04:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
c26e49c2e6
wip: starting to try to compile
2021-04-25 23:17:41 -04:00
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
aea3c4d3ab
wip
2021-04-25 10:23:59 -04:00
2ba2574ebf
Merge pull request #4619 from tyomitch/microbit
...
[build] Allow USB to be set to 0
2021-04-24 10:31:29 -04:00
556a126917
wip: getting closer
2021-04-23 21:44:13 -04:00
80e8b4ac14
Merge pull request #4635 from jepler/pcc
...
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-23 13:31:53 -07:00
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
2b4c88d633
wip: partial HID, still needs rework
2021-04-23 00:18:05 -04:00
64e0958916
wip: descriptor building
2021-04-21 23:25:36 -04:00
6b18a51d57
wip: working on descriptor templates
2021-04-20 22:20:34 -04:00
51ccf8dc30
wip: revert usb_descriptor changes; use raw descriptors instead
2021-04-19 23:24:18 -04:00
76d68f21ac
displayio: Add RGB555/565/_SWAPPED format support
...
This is helpful when displaying frames from an OV7670 camera, which
uses the RGB565_SWAPPED format internally.
2021-04-19 10:23:47 -05:00
5ccd5dc08b
Fix struct.pack with padding bytes
...
It used to validate the following arg could fit in a single byte.
Now, it always uses zero to pad.
2021-04-16 12:39:23 -07:00
6cb751ab06
wip: revamp API names
2021-04-14 22:10:09 -04:00
3978b50b8d
Merge pull request #4489 from gamblor21/audiomixer_rp2040
...
Add non M4 audiomixer support
2021-04-14 12:19:17 -07:00
4a7e129287
wip: latent usb device enabling/disabling
2021-04-13 23:33:44 -04:00
cd8deb0b72
Removed all the M4 comments
2021-04-13 17:36:14 -05:00
c6ee471b52
Merge branch 'main' of https://github.com/adafruit/circuitpython into patch-3
2021-04-13 00:32:19 -04:00
7ace53f22c
Remove comment for define being M4 only it can be M7 too
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-04-12 22:35:55 -05:00
280aefffb7
IncrementalEncoder: Re-add missing update of quarter_count
...
This lost line caused incremental encoders to stay stuck at 0 forever.
I seem to have lost it while trying to create tidy commits :frown:
2021-04-09 08:47:40 -05:00
3ce0b512f8
rasberrypi: IncrementalEncoder: factor out state machine
2021-04-08 16:25:47 -05:00
78089107bc
displayio.Bitmap: Allow modification though the buffer protocol
...
It is required to call .dirty() with appropriate arguments after modifications through the buffer protocol, or the display might not be updated correctly.
2021-04-03 10:41:20 -05:00
9bf4b4d81e
Fixes to math for level calculations
2021-04-02 16:47:25 -05:00
7c3975ecf2
update tinyusb to fix midi buffer overflow issue
2021-04-02 17:57:56 +07:00
171820e53f
Fix format
2021-04-01 20:45:15 +09:00
5f77d07760
Fix format
2021-04-01 20:26:10 +09:00
3c4d763fef
Fix format.
2021-04-01 18:04:33 +09:00
7810cb275c
Add two escape sequences to terminalio.Termial:
...
- ESC[yy;xxH : move cursor to (xx, yy)
- ESC[2J : clear screen
2021-04-01 17:33:57 +09:00
a13da2ad57
Merge pull request #4486 from kmatch98/displayio_area_expand
...
`displayio` and `vectorio`: move to displayio_area_union and away from _expand
2021-03-26 23:00:05 -04:00
8056af8648
[synthio] add a simple MidiTrack implementation
2021-03-26 16:38:10 -04:00
172715194f
adafruit_bus_device: SPIDevice: Fix so it works with bitbangio.SPI
...
.. by calling methods, same as we did for I2C
2021-03-26 14:51:53 -05:00
a70b679ed5
bitbangio.SPI.read: Support write_value, fix some other nits
2021-03-26 12:24:09 -05:00
0b212e2243
Add non M4 audiomixer support
2021-03-25 17:30:40 -05:00
56362a9806
remove duplicated code, replace with displayio_area_canon
2021-03-25 11:31:07 -05:00
9485805b6a
move to displayio_area_union and away from _expand
2021-03-25 11:21:39 -05:00
3785eb7779
correct rectangle size dimensions
2021-03-25 09:36:40 -05:00
98425c9a9d
Merge pull request #4464 from kmatch98/transform_fix
...
update logic for displayio.TileGrid's transform_xy
2021-03-22 15:52:23 -07:00
d52662856b
Merge pull request #4462 from jepler/disable-usb-cdc
...
storage: Correct when we check for USB mounts
2021-03-22 15:52:10 -07:00
24831a79d3
update logic for transform_xy
2021-03-22 16:38:56 -05:00
5a0e9945e6
storage: Correct when we check for USB mounts
...
Closes #4417
2021-03-22 11:45:54 -05:00
a05aab8304
Merge pull request #4454 from jepler/bitmaptools-readinto-4bit
...
Fix reading 4-bit data
2021-03-21 19:56:23 -05:00
c64fccbeee
hex may be more obvious
2021-03-21 13:48:08 -05:00
7229fe631d
Fix reading 4-bit data
2021-03-21 13:37:38 -05:00
e084a92671
Merge pull request #4432 from jepler/bitmap-dirty-improvements
...
Bitmap dirty improvements
2021-03-20 13:09:59 -05:00
9b188934d1
off by one error in rotozoom dirty_area
2021-03-19 21:23:55 -05:00
39500cdeab
Merge commit '40829d4cc85394513ca631cff23254344e29786c' of https://github.com/kmatch98/circuitpython into bitmap-dirty-improvements
2021-03-19 20:40:30 -05:00
95ac6c716b
rotozoom: switch to using set_dirty_area + write_pixel
2021-03-19 20:40:23 -05:00
40829d4cc8
switch to > in displayio_area_canon
2021-03-19 20:30:37 -05:00
1512ca520b
Fix PWMOut non-error handling and never reset
2021-03-19 09:57:21 -04:00
d0125617fd
Merge pull request #4428 from kmatch98/bitmap-read-2
...
Add `reverse_rows` to speedy bitmaptools.readinto function
2021-03-18 18:41:35 -05:00
623ece2c73
Merge pull request #4429 from jepler/displayio-bitmap-memoryview
...
displayio.Bitmap: Make memoryview()able
2021-03-18 18:38:25 -05:00
f5fd42c393
displayio: Move bitmap read-only checking to displayio_bitmap_set_dirty_area
...
This is a modest code savings, but more importantly it reduces
boilerplate in bitmap-modifying routines.
Callers need only ensure they call displayio_bitmap_set_dirty_area in
advance of the bitmap modifications they perform.
(note that this assumes that no bitmap operation can enter background
tasks. If an operation COULD enter background tasks, it MUST re-dirty
the area it touches when it exits, simply by a fresh call to
set_dirty_area with the same area as before)
2021-03-18 09:20:56 -05:00
36d608aa67
displayio_bitmap_set_dirty_area: rewrite in terms of displayio_area
...
.. simplifying code in the process. For instance, now fill_region
uses area routines to order and constrain its coordinates.
Happily, this change also frees a modest amount of code space.
2021-03-18 09:20:56 -05:00
3b506f0fa5
displayio: area: add displayio_area_canon
...
This routine will be used to simplify code that deals with ranges
of bitmap coordinates.
2021-03-18 09:06:00 -05:00
f40c0c13ad
displayio: area: add displayo_area_copy_coords, displayio_area_empty
...
.. and simplify the implmentation of displayio_area_union
This _slightly_ changes the behavior of displayio_area_union:
Formerly, if one of the areas was empty, its coordinates were still
used in the min/max calculations.
Now, if one of the areas is empty, the result gets the other area's coords
In particular, taking the union of the empty area with coords (0,0,0,0)
with the non-empty area (x1,y1,x2,y2) would give the area (0,0,x2,y2)
before, and (x1,y1,x2,y2) after the change.
2021-03-18 09:05:07 -05:00
47ca792765
arrayblit: mark bitmap area as dirty
2021-03-17 20:25:22 -05:00
670375dc0d
Merge pull request #4426 from kmatch98/main
...
Add getter for displayio.Palette item transparency/opacity.
2021-03-17 18:13:39 -07:00
c157ada90c
displayio.Bitmap: Make memoryview()able
2021-03-17 16:26:45 -05:00
c37a1f45f3
ran pre-commit for formatting fixes
2021-03-17 11:00:32 -05:00
580121d46e
minor formatting
2021-03-17 09:38:53 -05:00
ef91e1752c
merge upstream/main
2021-03-17 09:30:51 -05:00
5c3cce6f5d
add is_transparent getter to displayio.Palette
2021-03-16 20:43:23 -05:00
58679dc038
Merge remote-tracking branch 'origin/main' into bitmap-read-2
2021-03-16 12:21:50 -05:00
97b6664201
re-format with uncrustify
2021-03-16 12:20:09 -05:00
Jeff Epler
Dan Halbert
Scott Shawcroft
Dan Halbert
Scott Shawcroft
Kamil Tomaszewski
ajs256
Jeff Epler
Artyom Skrobov
gamblor21
Mark
hathach
Tsutomu IKEGAMI
Jeff Epler
Kevin Matocha