Commit Graph

101 Commits

Author SHA1 Message Date
Dan Halbert fed77e918a Fix formatting of "Limitations:" in a couple of modules
When "Limitations:" is in the class docstring, it is sometimes taken
as a class attribute name because of the colon. When exactly is not clear, but
changing embedded colons or various indentations fixes the problem.
2022-10-26 12:33:16 -04:00
Dan Halbert 01c15a1d1b catalog implementation limitations in documentation 2022-10-21 13:58:34 -04:00
Dan Halbert ead03cd96f add caveat in documentation 2022-10-13 11:47:10 -04:00
Jeff Epler 907c5d387f
Tweak black_bindings
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.

Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation

This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)

It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.

I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Dan Halbert db065a299f
Merge pull request #6933 from jepler/🥧🐮
Implement a useful subset of `wifi` and `socketpool` modules on 🥧🐮
2022-09-28 18:09:24 -04:00
Jeff Epler 346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out 2022-09-28 10:06:33 -05:00
Jeff Epler b2cc8d2aad
run black_bindings across all bindings 2022-09-27 15:21:42 -05:00
Scott Shawcroft 9d10a3da66
Conditionalize LTO 2022-05-27 12:59:54 -07:00
Dan Halbert f63b26c534 address jepler's comments and further squeezes 2022-05-20 10:10:55 -04:00
Dan Halbert a01dec1df9 message consolidation and more use of validators 2022-05-19 15:38:37 -04:00
Alec Delaney b035277e15
Mention other hardware in microcontroller module 2022-05-12 15:33:11 -04:00
Dan Halbert 5edc59f070
Merge pull request #6337 from jepler/property-storage
Optimize flash storage of properties
2022-05-06 09:55:18 -04:00
Dan Halbert 68acd14342 use generic hash routine where possible 2022-05-03 19:11:54 -04:00
Dan Halbert 9717fd235d make Pin hashable 2022-05-03 15:28:42 -04:00
Jeff Epler 78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
Jeff Epler 31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
mjs513 2e9e29bf1b Delete Left Over Comments 2022-04-20 04:10:16 -04:00
mjs513 fd41c1ac5b Update based on PR Comments 2022-04-14 06:45:16 -04:00
mjs513 7a30176b49 Fix Build Errors for Other Boards 2022-04-13 13:44:22 -04:00
root 716497c132 corrected pre-commit errors 2022-04-13 12:04:28 -04:00
root 60e330fb0d Added Settable Clock for MIMXRT BOARDS 2022-04-13 09:47:55 -04:00
Timon a1052d5f73
Initial broadcom port for Raspberry Pi
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.

There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
  themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
  mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
  and unnecessary for the vast majority of builds.

Fixes #4314
2021-11-22 14:54:44 -08:00
Robert Pafford 65f8804816
Implement reset_reason for raspberrypi port 2021-09-08 18:34:34 -04:00
Rob Capellini b8f2799609 Convert more modules to use MP_REGISTER_MODULE
Convert bitbangio, bitmaptools, _bleio, board, busio, countio, digitalio, framebufferio, frequencyio, gamepadshift, getpass, keypad, math, microcontroller, and msgpack modules to use MP_REGISTER_MODULE.

Related to #5183.
2021-08-26 21:35:02 -04:00
gamblor21 47db00f0af Made error message clear and reduce calls 2021-08-19 20:03:49 -05:00
gamblor21 e5dc722176 Fix for int type and pin validation 2021-08-17 19:16:26 -05:00
gamblor21 168ed355b1 Made check function generic 2021-08-17 17:55:26 -05:00
microDev 9ac607dffa
update run-mode
- add microcontroller.RunMode.UF2
- add UF2, NORMAL and BOOTLOADER run-modes to esp32s2
2021-07-18 00:00:58 +05:30
Jeff Epler 268717e427 ParallelImageCapture: Switch to taking a list of pins
.. adopting validate_pins from RGBMatrix into shared-bindings

.. updating other platforms for API change
2021-06-10 11:15:18 -05:00
Scott Shawcroft 3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod 2021-05-05 17:51:52 -07:00
Scott Shawcroft f0bb26d70f
Merge MicroPython 1.13 into CircuitPython 2021-05-04 18:06:33 -07:00
Scott Shawcroft 76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
root e1838ff335 Fix typo in documentation. 2021-01-29 11:57:36 -06:00
root cfd6ffc649 Adding files for cpu temperature fix 2021-01-28 16:06:30 -06:00
root ccdc97d23e Update documentation for microprossors with multiple cpus 2021-01-26 09:47:21 -06:00
Scott Shawcroft 2b4ad1ed03
Fix warnings that come from -O3 (I think) 2021-01-20 19:16:56 -08:00
Scott Shawcroft 733094aead
Add initial RP2040 support
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.

Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
Dan Halbert 9391c8f9dd Make ResetReason and RunReason available 2020-12-06 12:00:00 -05:00
Dan Halbert 65e2fe4654 fix stub problems; touch up doc 2020-11-27 23:27:15 -05:00
Dan Halbert 104a089677 deep sleep working; deep sleep delay when connected 2020-11-26 22:06:37 -05:00
Dan Halbert f868cc5dd0 some API renaming and bug fixes; fix docs 2020-11-24 23:37:05 -05:00
Dan Halbert 7a45afc549 working, but need to avoid deep sleeping too fast before USB ready 2020-11-23 22:44:53 -05:00
Dan Halbert a0f1ec3c4a wip 2020-11-22 19:10:09 -05:00
Dan Halbert 75559f35cc wip: ResetReason to microcontroller.cpu 2020-11-21 23:29:52 -05:00
Dan Halbert 682054a216 WIP: redo API; not compiled yet 2020-11-19 00:23:27 -05:00
microDev 930cf14dce
Add check for invalid io, function to disable all alarms 2020-10-27 16:17:26 -07:00
microDev 59df1a11ad
Add alarm_touch module 2020-10-27 16:16:52 -07:00
microDev 4d8ffdca8d
restructure alarm modules 2020-10-27 16:15:09 -07:00
microDev e5ff55b15c
Renamed alarm modules 2020-10-27 16:13:25 -07:00