7de1da45da
woops out of sync header, plus... i dunno add some frozen modules cause we have almost no RAM :(
2021-01-09 13:23:17 -05:00
813fa671f3
nowhitespace
2021-01-09 12:29:08 -05:00
9253351fa4
Merge branch 'main' into main
2021-01-09 12:25:16 -05:00
999ee68e12
try adding new feather def
2021-01-09 12:22:53 -05:00
7b4558b750
Fix socket.recvfrom_into()
2021-01-08 19:17:17 -05:00
06ab848a0d
added platform
2021-01-08 16:48:25 -06:00
de5b138dcf
remove commented line
2021-01-08 14:46:37 -05:00
7556f38f04
initialize LDO2 in board_init()
2021-01-08 14:40:06 -05:00
5f0e41ad60
I2SOut: Enable ticks during audio playback
...
.. otherwise, the background callback to load the I2S fifos does not get
run. (I'm not sure this is _correct_ behavior of sleep + background
tasks, but it is the current behavior)
2021-01-08 09:01:34 -06:00
430bcdb59d
port_i2s_play: fill the initial buffer via background callback
...
There were _possibly_ problems where this routine was being entered
by direct call AND by background callback. Schedule the work here,
and it will be done almost immediately, without worry about interference.
I don't know if this is strictly necessary, but it doesn't hurt. Since
the I2S clock is being run all the time, we have to enter the background
task to fill the FIFO with zeros constantly anyway.
2021-01-08 08:49:25 -06:00
12264cca34
port_i2s_play: remove build error
2021-01-08 08:47:13 -06:00
0b7a4c4b2b
i2s_fill_buffer: remove debug print
2021-01-08 08:46:56 -06:00
873a300d02
i2s_fill_buffer: Need to fill with zeros when stopping
2021-01-08 08:46:41 -06:00
cfd8288dfa
esp2s2: enlarge stack-buffer, use it instead of i2s_zero_dma_buffer
...
.. it's not clear that there was a problem with i2s_zero_dma_buffer, but
just in case.
2021-01-07 16:29:52 -06:00
d3afda61d8
esp32s2: i2s: must reset buffer, otherwise wave samples don't start
...
.. and other housekeeping when starting to play a sample
2021-01-07 16:29:08 -06:00
352226402c
esp32s2: i2s: fix accounting for "stretched" frames
2021-01-07 16:28:33 -06:00
010a4e7b0f
esp32s2: port: Ensure JTAG pins are available for debugging
2021-01-07 16:23:21 -06:00
115f3e0867
Updated code as per helpful suggestion
2021-01-07 23:05:16 +01:00
7bb196b9d2
esp32s2: 'make flash': Allow customizing the esptool flags
...
This can be useful so that e.g., on a Kaluga when programming via
the FTDI chip, you can override the variable to specify "--after=hard_reset"
to automatically return to running CircuitPython, choose a different
baud rate (921600 is about 2s faster than 460800), etc:
make BOARD=espressif_kaluga_1 ESPTOOL_FLAGS="-b 921600 --before=default_reset --after=hard_reset"
2021-01-07 15:01:33 -06:00
30c6dd3f76
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-07 14:11:14 -06:00
6976ec6ef9
Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led
2021-01-07 15:02:40 -05:00
55c80754c7
Merge pull request #3945 from 2bndy5/fix-table-in-a-readme
...
convert esp32s2 port readme to rst
2021-01-07 10:43:34 -08:00
0b0b476be6
Merge pull request #3940 from caternuson/magtag_accelo_irq_pin
...
Add MagTag accelo IRQ pin
2021-01-07 10:31:33 -08:00
18122e0455
missed a couple inline code snippets
2021-01-06 15:28:19 -08:00
092331eee1
convert esp32s2 readme to rst
2021-01-06 15:19:40 -08:00
66d87782be
Adding authmode keyword
2021-01-06 23:52:30 +01:00
9db0a4f265
add magtag accelo irq pin
2021-01-06 09:17:19 -08:00
a33359762d
Merge pull request #3903 from anecdata/reasons
...
ESP32-S2: Log all Wi-Fi events & remove unneeded call
2021-01-06 08:41:19 -08:00
98c9492a8c
change ESP_EARLY_LOG* to ESP_LOG* throughout event_handler
2021-01-05 18:39:51 -06:00
ec02102409
implment use of DotStar for staus led
2021-01-04 07:41:25 -05:00
10f178d162
Fixed incorrect pin assignment on header
...
IO13 is for blue LED
IO14 is the correct pin header between IO18 and IO12
The silk is wrong (shows IO13), but hardware is correct as IO14, but IO14 was not included in pins.c
Silk will be updated on next PCB production run
2021-01-04 10:06:32 +11:00
2ce07209df
changes based on UM's input
2021-01-01 17:23:11 -08:00
220501e159
dupe LED entries
2020-12-31 18:02:44 -08:00
43f93b097f
release and pre-release FeatherS2 NSync
2020-12-31 17:50:41 -08:00
5698b8bb0a
Merge pull request #3850 from microDev1/touch-s2
...
Support for Touch Alarm
2020-12-30 16:25:11 -06:00
0bad6110d4
update wake-alarm implementation
2020-12-31 02:44:20 +05:30
b83bdc540d
enable light-sleep functionality
2020-12-31 02:22:20 +05:30
28ce5e8988
Merge branch 'main' into touch-s2
2020-12-30 22:44:22 +05:30
c7f68022ef
add pretend-to-sleep functionality
2020-12-30 22:11:22 +05:30
d537d94a4c
see what we're missing
2020-12-30 09:45:15 -06:00
0914b71653
remove unneeded set_config (wrong param; called in connect anyway)
2020-12-30 09:26:25 -06:00
72cad49c69
Fix minor typo in ESP32S2 readme
2020-12-29 22:52:59 -06:00
a7542598a0
esp32s2: add I2SOut
2020-12-29 14:46:38 -06:00
b40a579d18
esp32s2: espidf: Consistent error checking of esp-idf calls
...
By surrounding most ESP-IDF API calls with this new macro, their failure will
result in a CircuitPython exception.
2020-12-29 14:06:32 -06:00
05ba1431c3
esp32s2: espidf: Add IDFError
...
this is an exception class for "generic" IDF errors that don't have
their own exception type.
2020-12-29 14:06:32 -06:00
d024df6b06
esp32s2: Use better optimizer flags in debug builds
...
(note that the before and after files both lack trailing newlines; this is
how the esp-idf do)
OPTIMIZATION_DEFAULT is -Og, which enables optimizations that do not
interfere with the debugger:
```
elseif(CONFIG_COMPILER_OPTIMIZATION_DEFAULT)
list(APPEND compile_options "-Og")
```
2020-12-29 14:06:32 -06:00
7401aa8e85
Merge pull request #3888 from microDev1/fix-reset-pin
...
FIX : common_hal_reset_pin()
2020-12-29 10:08:47 -06:00
c3396e4b49
Merge pull request #3868 from BennyE/wifi-enhancement-countrycode
...
esp32-s2: wifi enhancement to include countrycode
2020-12-28 11:49:41 -08:00
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
6c7e6abcfd
Downgrade OTA API for IDF 4.2
2020-12-27 20:30:49 -08:00
64bb055700
Updating comment to reflect feedback of espressif from IDFGH-4486 -> works correct as per the protocol
2020-12-24 15:40:53 +01:00
8061a2574d
Merge branch 'main' into pin_alarm
2020-12-23 22:05:02 -05:00
1a6b1b1953
implementing suggested changes
2020-12-24 00:37:37 +01:00
e9c9fce15d
Remove debug log messages
2020-12-23 14:59:09 +01:00
1fca297a2d
A couple sleep fixes
...
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
2020-12-22 16:13:02 -08:00
da8f023665
esp32s2: make flash: use the stub
...
Very long ago, this was apparently not supported in esptool yet, at
least when operating over USB CDC. This now works just fine, and
our esp webtool relies on it as well. It makes flashing faster,
too.
2020-12-22 10:27:42 -06:00
d4e9eea397
mark alarm.wake_alarm during gc sweep
2020-12-22 08:11:01 -08:00
d6df43b943
Merge pull request #3863 from dhalbert/adafruit-prefix
...
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-22 08:02:35 -05:00
39ca406a31
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-21 23:32:11 -05:00
ae3b440835
more fixes and still with debug
2020-12-22 00:32:48 +01:00
75620884e6
Fix stubs, recv_into error
2020-12-21 13:26:43 -05:00
32736dd2c3
Implement server API
2020-12-20 17:12:03 -05:00
2e393ed195
adding debug infos
2020-12-20 22:03:38 +01:00
ecd7c0878e
expose wake pin parameter and more tweaks
2020-12-19 20:54:36 +05:30
a60fabdffa
add touch alarm support for esp32s2
2020-12-19 12:56:34 +05:30
8eaf2b0c19
implement touch alarm
2020-12-18 12:54:36 +05:30
4512290ba0
Merge branch 'main' into ota-s2
2020-12-18 00:44:00 +05:30
4863413bc9
rename ota to dualbank
2020-12-18 00:34:56 +05:30
0dcc659d53
Swap to IDF release/4.2 branch for stability
2020-12-15 18:12:59 -08:00
1ad49d9a18
Add alarm.pin that wakes on pin level
...
Fixes #3787
2020-12-15 18:12:59 -08:00
3ad4b12ce1
Merge branch 'main' into esp-analog-hang
2020-12-15 15:08:30 -05:00
d076296659
Merge pull request #3816 from dhalbert/sleepmemory
...
alarm.sleep_memory + alarm.wake_alarm
2020-12-14 17:40:02 -08:00
d6ee17c6fd
Merge pull request #3817 from BennyE/reserve-pins-only-for-debug
...
esp32s2: Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-14 17:32:17 -08:00
a1f773d9ed
Merge pull request #3819 from BennyE/issue3663
...
Fix for issue 3663 by returning early if no scan was started before s…
2020-12-14 17:11:18 -08:00
dc473b29e3
Merge pull request #3643 from hierophect/esp32-pin-reset
...
ESP32-S2: Add IDF pin resets to Microcontroller
2020-12-14 17:09:29 -08:00
d793ec2872
Change pinfunc to default of 0 at reset
2020-12-14 14:25:38 -05:00
cac755ba16
Merge remote-tracking branch 'upstream/main' into esp-analog-hang
2020-12-14 13:00:57 -05:00
f15e2d86c0
Reduce samples from 64 to 2
2020-12-14 12:59:20 -05:00
e0afa32cfa
use RTC_DATA_ATTR; address review comments
2020-12-14 11:36:54 -05:00
210c0ec89c
add country(code) to wifi network objects)
2020-12-13 13:32:12 +01:00
37ee5e683d
Merge branch 'main' into ota-s2
2020-12-12 05:25:46 +05:30
c5c13620f2
Fix for issue 3663 by returning early if no scan was started before stop is issued
2020-12-12 00:49:53 +01:00
81c4871fdf
Set DEBUG CFLAG if set in make
2020-12-11 22:11:39 +01:00
e3194ad54e
Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-11 20:35:28 +01:00
cf938983e9
SleepMemory + set alarm.wake_alarm
2020-12-11 08:10:26 -05:00
cb35abfd04
add docs, update translation & fix ota.flash()
2020-12-11 01:01:01 +05:30
55f4110983
fix typo
2020-12-10 14:16:25 -05:00
5964163649
Initial SleepMemory code
2020-12-10 13:03:40 -05:00
6a4f74946f
reset ota module on every vm run
2020-12-10 16:48:58 +05:30
07015ad527
add ability to switch boot partition
2020-12-10 16:42:45 +05:30
bfa2c604ef
add ability to flash in discontinuous chunks
2020-12-10 15:45:25 +05:30
ed5add37f6
add ability to flash in continuous chunks
2020-12-10 14:36:49 +05:30
dee86a014b
factor out esp_ota_end
2020-12-10 14:04:24 +05:30
20c3184c87
re-organize and clean-up
2020-12-10 12:34:56 +05:30
e14b148e62
Merge pull request #3803 from skieast/fix_i2c_hang_with_wifi
...
Working, tested with two i2c busses
2020-12-09 10:03:31 -08:00
133013083a
Merge pull request #3808 from tannewt/panic_safe_mode
...
Enter safe mode after panic or brownout
2020-12-08 16:31:22 -08:00
57101d7da6
Merge pull request #3807 from tannewt/sleep_tweaks
...
Add `board_deinit` for use with sleep
2020-12-08 16:30:41 -08:00
9a5006e241
Remove problematic calloc
2020-12-08 17:43:39 -05:00
0b4bcd9599
Fix build and more comments
2020-12-08 13:05:21 -08:00
d0a806d797
Enter safe mode after panic or brownout
...
Uses the IDF's reset reason. Does nothing before reset.
Fixes #3389
2020-12-08 11:03:24 -08:00
40118bcf57
Add `board_deinit` for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
2f95c94ad8
esp32s2 - update common_hal_mcu_reset
2020-12-08 18:00:58 +05:30
602243748b
add ota support for esp32s2
2020-12-08 11:45:00 +05:30
fc23a0cc8a
implement ota module
2020-12-08 11:30:00 +05:30
571c063c2a
Working, tested with two i2c busses
2020-12-07 17:57:54 -08:00
44b56f76c4
Store safe mode state in the RTC.
...
Also print backtrace before reset when DEBUG. This will help debug
safe mode issues which calls reset.
2020-12-07 16:39:54 -08:00
22ad76bb48
Merge pull request #3800 from BennyE/wifi-better-logs
...
Enhance debug log for wifi scan, sta_start, sta_stop
2020-12-07 12:32:15 -08:00
c1a2ea27ce
Change to config-based resets
2020-12-07 13:57:47 -05:00
c7b5928833
Fix submodule desync
2020-12-07 11:47:39 -05:00
40a536904f
Merge remote-tracking branch 'upstream/main' into esp32-pin-reset
2020-12-07 11:45:27 -05:00
169b487509
Include wifi.radio singleton in gc
2020-12-07 11:07:56 -05:00
70827ac3da
debug log for wifi scan, start stop
2020-12-06 23:38:04 +01:00
348392f8cc
Merge pull request #3775 from tannewt/nina_certs
...
Use nina-fw root certs
2020-12-02 16:13:19 -05:00
9b3186b625
Merge pull request #3776 from tannewt/backup_socket_timeout
...
Two minor socket changes
2020-12-02 16:12:29 -05:00
31acfedf93
Merge pull request #3780 from tannewt/block_while_erasing
...
Block all tasks (not interrupts) during flash erase
2020-12-02 16:10:25 -05:00
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
...
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
73e22f9eeb
Block all tasks (not interrupts) during flash erase
...
Otherwise we risk running code from flash while an erase is in
progress, crashing and corrupting the file system.
Related to #3744
2020-12-01 18:15:06 -08:00
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
927624468d
Two minor socket changes
...
* Remove BrokenPipeError and prefer to return the number of bytes
received. (May be zero.)
* Add two minute backup timeout to reduce the chance we hang on
recv accidentally.
2020-11-30 18:39:50 -08:00
4ac4faaaf6
Use nina-fw root certs
...
That way we have one set we use for all of Adafruit's connected
devices.
2020-11-30 17:02:26 -08:00
5b3c930e38
Merge pull request #3738 from microDev1/fix-touch
...
ESP32S2: Fix multiple touchpad don't work simultaneously
2020-11-30 16:03:16 -08:00
c7404a3ff8
Add movable allocation system.
...
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.
By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
596e0e4bd2
merge from upstream
2020-11-27 16:06:57 -05:00
e308a9ec11
working! PinAlarm not implemented yet.
2020-11-27 16:03:37 -05:00
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
e90cb3ad86
Merge branch 'main' into fix-touch
2020-11-26 11:33:45 +05:30
6af48bb24c
reset touchin on every vm run
2020-11-26 11:22:44 +05:30
7923aa0a62
Merge pull request #3708 from hierophect/esp32s2-udp
...
ESP32-S2: Add UDP with recvfrom_into and sendto
2020-11-25 21:11:20 -06:00
6fd123a5c4
Merge pull request #3758 from tannewt/update_connect_doc
...
Update wifi.Radio.connect doc
2020-11-25 21:09:56 -06:00
abff2615cb
Merge pull request #3754 from hierophect/esp-spi-pinclaim
...
ESP32S2: fix pin claiming bugs
2020-11-25 15:11:29 -08:00
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
9dbea36eac
changed alarm.time API
2020-11-25 15:09:27 -05:00
a854da35d3
Fix masking issue causing pin claim problems
2020-11-25 12:14:56 -05:00
c9bc877683
Merge remote-tracking branch 'upstream/main' into esp-spi-pinclaim
2020-11-25 10:43:35 -05:00
9a692c3222
Exit faster on recv when TLS connection closed
...
When a TLS connection is closed by the server it usually sends a
notice. We see this incoming byte with lwip_ioctl and try to read
it. The read returns 0 but we keep trying anyway. Now, we quit
trying when we get zero back. If the connection was still alive
it'd either read a byte or delay until a byte could be read.
2020-11-24 18:14:22 -08:00
4ac11c8d31
Update wifi.Radio.connect doc
...
Now it includes bssid info.
2020-11-24 17:54:39 -08:00
510f464234
Merge branch 'main' into esp32s2-udp
2020-11-24 18:28:10 -05:00
669f17e5bf
Merge pull request #3678 from microDev1/nvm-s2
...
ESP32S2: Support for NVM
2020-11-24 14:45:35 -08:00
59458a9013
Add pin claiming to SPI construct
2020-11-24 16:46:11 -05:00
d0e75e635a
Merge pull request #3714 from microDev1/ps2io-S2
...
ESP32S2: Support for PS/2-IO
2020-11-24 14:56:09 -05:00
0c5e0954db
Add closed socket identification
2020-11-24 14:51:06 -05:00
1031fe2992
correct submodule
2020-11-24 14:46:43 -05:00
0836abba41
Merge pull request #3720 from tannewt/more_wifi_retry
...
Retry connection when getting NOT_AUTHED
2020-11-24 09:54:54 -06:00
bbe13490b5
Merge branch 'main' into nvm-s2
2020-11-24 12:24:48 +05:30
6ff24410eb
use values pointer directly
2020-11-24 11:44:11 +05:30
9dd1783da5
Merge branch 'main' into ps2io-S2
2020-11-24 11:11:11 +05:30
7a45afc549
working, but need to avoid deep sleeping too fast before USB ready
2020-11-23 22:44:53 -05:00
ebdc48ae22
Merge pull request #3745 from kattni/magtag-pin-update
...
Add pin names from silk
2020-11-23 19:48:12 -05:00
1c9f33a372
Replace reset with mux change
2020-11-23 19:01:30 -05:00
86694262b8
Merge remote-tracking branch 'upstream/main' into esp32-pin-reset
2020-11-23 18:58:46 -05:00
lady ada
Caio Henrique de Queiroz Katayama
anecdata
jerryneedell
Jeff Epler
BennyE
Scott Shawcroft
brendan
caternuson
Seon Rozenblum
askpatricw
Jeff Epler
microDev
Hugo Dahl
Scott Shawcroft
Dan Halbert
Dan Halbert
Lucian Copeland
Bruce Segal
Christian Walther