Commit Graph

46 Commits

Author SHA1 Message Date
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George 761e4c7ff6 all: Remove trailing spaces, per coding conventions. 2017-07-19 13:12:10 +10:00
Benjamin Weps 3e82bedf46 stmhal/sdcard: Allow a board to customise the SDIO pins. 2017-06-27 12:42:46 +10:00
Damien George 0986675451 stmhal: Convert all module and method tables to use MP_ROM macros. 2017-05-06 17:03:40 +10:00
Damien George 7876e54aa5 stmhal/sdcard: Add support for SDMMC2 on F7 MCUs.
By default the SDIO (F4) or SDMMC1 (L4, F7) is used as the SD card
peripheral, but if a board config defines MICROPY_HW_SDMMC2_CK and other
pins then the SD card driver will use SDMMC2.
2017-03-30 17:55:21 +11:00
Damien George 89738e8240 stmhal: Rename sys_tick ticks/delay functions to corresp. mp_hal ones.
The renames are:
HAL_Delay -> mp_hal_delay_ms
sys_tick_udelay -> mp_hal_delay_us
sys_tick_get_microseconds -> mp_hal_ticks_us

And mp_hal_ticks_ms is added to provide the full set of timing functions.

Also, a separate HAL_Delay function is added which differs slightly from
mp_hal_delay_ms and is intended for use only by the ST HAL functions.
2017-03-02 15:32:32 +11:00
Damien George 6ab5512132 stmhal: Use mp_hal_delay_ms instead of HAL_Delay. 2017-03-02 15:02:57 +11:00
Damien George 3667ee1b88 stmhal: On boot, mount all available partitions of the SD card.
The first partition is mounted as "/sd" and subsequent partitions are
mounted as "/sd<part_num>".  This is backwards compatible with the previous
behaviour, which just mounted the first partition on "/sd".

At this point, only FatFs filesystems are mounted.
2017-01-31 12:18:08 +11:00
Damien George a526352454 stmhal: Set the FatFs partition number when initialising VFS object.
stmhal has MULTI_PARTITION enabled for FatFs and so these values need to be
initialised.
2017-01-30 13:02:10 +11:00
Damien George b697c89009 extmod: Merge old fsusermount.h header into vfs.h and vfs_fat.h.
vfs.h is for generic VFS declarations, and vfs_fat.h is for VfsFat
specific things.
2017-01-30 12:26:08 +11:00
Damien George 84c614e729 stmhal: Convert to use VFS sub-system and new ooFatFs component.
This patch makes the following configuration changes:
- MICROPY_FSUSERMOUNT is disabled, removing old mounting infrastructure
- MICROPY_VFS is enabled, giving new VFS sub-system
- MICROPY_VFS_FAT is enabled, giving uos.VfsFat type
- MICROPY_FATFS_OO is enabled, to use new ooFatFs lib, R0.12b

User facing API should be almost unchanged.  Most notable changes are
removal of os.mkfs (use os.VfsFat.mkfs instead) and pyb.mount doesn't
allow unmounting by passing None as the device.
2017-01-27 23:22:15 +11:00
Damien George e202b6f586 stmhal/sdcard: Use mp_hal_pin_config function instead of HAL_GPIO_Init.
There is a minor functional change with this patch, that the GPIO are now
configured in fast mode, whereas they were in high speed mode before.  But
the SDIO should still work because SD CK frequency is at most 25MHz.
2016-12-22 14:55:26 +11:00
Jean-François Milants 08bd7d1d31 stmhal/sdcard: Clean/invalidate cache before DMA transfers with SD card.
Add 2 macros in mphalport.h that clean and invalidate data caches only on
STM32F7 MCUs.  They are needed to ensure the cache coherency before/after
DMA transferts.

* MP_HAL_CLEANINVALIDATE_DCACHE cleans and invalidate the data cache. It
  must be called before starting a DMA transfer from the peripheral to the
  RAM memory.

* MP_HAL_CLEAN_DCACHE cleans the data cache.  It must be called before
  starting a DMA transfert from the RAM memory to the peripheral.

These macros are called in sdcard.c, before reading from and writing to
the SDCard, when DMA is used.
2016-12-02 13:51:09 +11:00
Ryan Shaw 8ebd53afc9 stmhal: enable SD power save (disable CLK on idle) 2016-11-07 16:49:29 +11:00
dpslwk f3636a7b46 stmhal: Enable SD card on L4 MCUs. 2016-06-29 14:29:01 +01:00
Damien George 87981fc517 stmhal/sdcard: Allow to do unaligned read-from/write-to SD card.
For example, the following code now works with a file on the SD card:

    f = open('test', 'rb') # test must be 1024 bytes or more in size
    f.seek(511)
    f.read(513)

Also works for writing.

Fixes issue #1863.
2016-05-13 14:45:40 +01:00
Damien George 88153dc56a stmhal/sdcard: Fix initialisation of DMA TX so that writes work.
Addresses issue #2034.
2016-05-06 10:53:25 +01:00
Tobias Badertscher e64032d6fd stmhal: L4: Adapt DMA to be able to support STM32L4 MCU series.
The main thing is to change the DMA code in a way that the structure
DMA_Stream_TypeDef (which is similar to DMA_Channel_TypeDef on stm32l4)
is no longer used outside of dma.c, as this structure only exists for the
F4 series.  Therefore I introduced a new structure (dma_descr_t) which
handles all DMA specific stuff for configuration.  Further the periphery
(spi, i2c, sdcard, dac) does not need to know the internals of the dma.
2016-05-05 14:51:20 +01:00
Damien George e372e83b30 extmod/fsusermount: Move BP_IOCTL_xxx constants to fsusermount.h. 2016-02-10 23:40:35 +00:00
Damien George b33a770596 extmod/fsusermount: Support mounting of multiple block devices.
This patch adds support to fsusermount for multiple block devices
(instead of just one).  The maximum allowed is fixed at compile time by
the size of the fs_user_mount array accessed via MP_STATE_PORT, which
in turn is set by MICROPY_FATFS_VOLUMES.

With this patch, stmhal (which is still tightly coupled to fsusermount)
is also modified to support mounting multiple devices   And the flash and
SD card are now just two block devices that are mounted at start up if
they exist (and they have special native code to make them more
efficient).
2016-02-10 23:40:10 +00:00
Damien George 3770cd2e70 stmhal: Expose flash and SD card as proper objects with block protocol.
You can now create (singleton) objects representing the flash and SD
card, using:

    flash = pyb.Flash()
    sdcard = pyb.SDCard()

These objects provide the block protocol.
2016-02-10 23:40:10 +00:00
Damien George 401af50dc0 stmhal: Add pyb.irq_stats() to get statistics about IRQ calls.
Adds a lot of code, makes IRQs a bit less efficient, but is very useful
for debugging.  Usage: pyb.irq_stats() returns a memory view that can be
read and written, eg:

    list(pyb.irq_stats())
    pyb.irq_stats()[0]
    pyb.irq_stats()[0] = 0

The patch provides general IRQ_ENTER() and IRQ_EXIT() macros that can be
modified to provide further IRQ statistics if desired.
2015-12-22 21:00:20 +00:00
Damien George f4c17378b3 stmhal: Protect SD card DMA transactions against USB MSC contention.
Consider the following scenario: SD card is being read by pyboard; USB
irq comes in for MSC read request; SD card needs to be read from within
USB irq while SD read is already ongoing.  Such contention needs to be
avoided.

This patch provides a simple solution, to raise the irq priority above
that of the USB irq during SD DMA transfers.  Pyboard and PC can now
read from the SD card at the same time (well, reads are interleaved).
2015-12-04 11:39:21 +00:00
Damien George 9936aa3f87 stmhal: Save RAM and ROM by making SD DMA init structure const for tx/rx. 2015-11-24 15:44:16 +00:00
Dave Hylands 6edffd0df5 stmhal: Add dma support for sdcard.
This started out using IgorLektorovEpam work in PR #1389
and reworked it.
2015-11-24 09:37:25 +00:00
Dave Hylands 823a961ecc stmhal: Enable sdcard on STM32F7DISC board. 2015-10-30 12:05:14 +00:00
Paul Sokolovsky 1b586f3a73 py: Rename MP_BOOL() to mp_obj_new_bool() for consistency in naming. 2015-10-11 15:18:15 +03:00
Dave Hylands ea8bf81058 stmhal: Replace #include "stm32f4xx_hal.h" with #include STM32_HAL_H. 2015-07-30 00:38:25 +01:00
Damien George 7674da8057 stmhal: Remove some unnecessary declarations, purely for cleanup. 2015-03-20 22:27:34 +00:00
Damien George 4d77e1a034 py: Use m_{new,renew,del} consistently.
This is so all memory requests go through the same interface.
2015-02-27 09:34:51 +00:00
Damien George 2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Damien George 072bd07f17 stmhal: Add retry to SD card init.
This fixed an issue with a certain SD card sometimes not initialising
first time round.  See issue #822 for related, and thanks to
@iabdalkader for the idea.
2014-10-20 00:04:27 +01:00
Damien George 1d7fb82f0a stmhal: Change 64-bit arithmetic to 32-bit for SD card block addressing.
By measuring SD card addresses in blocks and not bytes, one can get away
with using 32-bit numbers.

This patch also uses proper atomic lock/unlock around SD card
read/write, adds SD.info() function, and gives error code for failed
read/writes.
2014-09-15 23:49:57 +01:00
Felix Domke 6ff42c54bb stmhal/sdcard.c: add pyb.SD.write 2014-09-15 22:34:16 +01:00
Dave Hylands 994bb4a839 Fix sdcard_power_on to not do anything if the card is already powered on. 2014-08-25 10:16:52 -07:00
Damien George 594699bc88 stmhal: Protect SD_WriteBlocks by IRQ disable/enable pair. 2014-07-07 07:29:06 +01:00
Dave Hylands 90ba80dc36 Disable IRQs around sdcard reads.
Once the code switches to using DMA, this can be removed.
2014-07-06 09:51:22 -07:00
Paul Sokolovsky 8139494e54 stmhal: Include mpconfig.h before all other includes.
It defines types used by all other headers.

Fixes #691.
2014-06-28 23:32:03 +03:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George d553be5982 build: Simplify build directory layout by putting all headers in genhdr.
Any generated headers go in $(BUILD)/genhdr/, and are #included as
'genhdr/xxx.h'.
2014-04-17 18:03:27 +01:00
Damien George df6567e634 Merge map.h into obj.h.
Pretty much everyone needs to include map.h, since it's such an integral
part of the Micro Python object implementation.  Thus, the definitions
are now in obj.h instead.  map.h is removed.
2014-03-30 13:54:02 +01:00
Damien George d17926db71 Rename rt_* to mp_*.
Mostly just a global search and replace.  Except rt_is_true which
becomes mp_obj_is_true.

Still would like to tidy up some of the names, but this will do for now.
2014-03-30 13:35:08 +01:00
Damien George 09d207785c stmhal: Unify naming of HW config; make SD detect configurable.
All board config macros now begin with MICROPY_HW_.

Renamed PYBv10 to PYBV10, since macros should be all uppercase.

Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD
detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
Damien George 9b196cddab Remove mp_obj_type_t.methods entry and use .locals_dict instead.
Originally, .methods was used for methods in a ROM class, and
locals_dict for methods in a user-created class.  That distinction is
unnecessary, and we can use locals_dict for ROM classes now that we have
ROMable maps.

This removes an entry in the bloated mp_obj_type_t struct, saving a word
for each ROM object and each RAM object.  ROM objects that have a
methods table (now a locals_dict) need an extra word in total (removed
the methods pointer (1 word), no longer need the sentinel (2 words), but
now need an mp_obj_dict_t wrapper (4 words)).  But RAM objects save a
word because they never used the methods entry.

Overall the ROM usage is down by a few hundred bytes, and RAM usage is
down 1 word per user-defined type/class.

There is less code (no need to check 2 tables), and now consistent with
the way ROM modules have their tables initialised.

Efficiency is very close to equivaluent.
2014-03-26 21:47:19 +00:00
Damien George c12b2213c1 Change mp_method_t.name from const char * to qstr.
Addresses issue #377.
2014-03-26 20:15:40 +00:00
Damien George fb431bf556 stmhal: Add SD card support.
Just low-level read/write support.  No filesystem yet.
2014-03-17 13:03:41 +00:00