djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

stmhal: Save RAM and ROM by making SD DMA init structure const for tx/rx.

This commit is contained in:
Damien George 2015-11-24 15:21:37 +00:00
parent 522d454e34
commit 9936aa3f87
1 changed files with 26 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

59
stmhal/sdcard.c
View File

@ -64,12 +64,33 @@
#endif
// TODO: Since SDIO is fundamentally half-duplex, we really only need to
// tie up one DMA channel. However, the HAL DMA API doesn't
// seem to provide a convenient way to change the direction. I believe that
// its as simple as changing the CR register and the Init.Direction field
// and make DMA_SetConfig public.
// TODO: I think that as an optimization, we can allocate these dynamically
// if an sd card is detected. This will save approx 260 bytes of RAM
// when no sdcard was being used.
static SD_HandleTypeDef sd_handle;
static DMA_HandleTypeDef sd_rx_dma, sd_tx_dma;
static DMA_InitTypeDef sd_rx_dma_init, sd_tx_dma_init;
// Parameters to dma_init() for SDIO tx and rx.
static const DMA_InitTypeDef dma_init_struct_sdio = {
.Channel = 0,
.Direction = 0,
.PeriphInc = DMA_PINC_DISABLE,
.MemInc = DMA_MINC_ENABLE,
.PeriphDataAlignment = DMA_PDATAALIGN_WORD,
.MemDataAlignment = DMA_MDATAALIGN_WORD,
.Mode = DMA_PFCTRL,
.Priority = DMA_PRIORITY_VERY_HIGH,
.FIFOMode = DMA_FIFOMODE_ENABLE,
.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL,
.MemBurst = DMA_MBURST_INC4,
.PeriphBurst = DMA_PBURST_INC4,
};
void sdcard_init(void) {
GPIO_InitTypeDef GPIO_Init_Structure;
@ -106,36 +127,6 @@ void HAL_SD_MspInit(SD_HandleTypeDef *hsd) {
HAL_NVIC_SetPriority(SDIO_IRQn, IRQ_PRI_SDIO, IRQ_SUBPRI_SDIO);
HAL_NVIC_EnableIRQ(SDIO_IRQn);
// TODO: Since SDIO is fundamentally half-duplex, we really only need to
// tie up one DMA channel. However, the HAL DMA API doesn't
// seem to provide a convenient way to change the direction. I believe that
// its as simple as changing the CR register and the Init.Direction field
// and make DMA_SetConfig public.
// Configure DMA Rx parameters
sd_rx_dma_init.PeriphInc = DMA_PINC_DISABLE;
sd_rx_dma_init.MemInc = DMA_MINC_ENABLE;
sd_rx_dma_init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sd_rx_dma_init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sd_rx_dma_init.Mode = DMA_PFCTRL;
sd_rx_dma_init.Priority = DMA_PRIORITY_VERY_HIGH;
sd_rx_dma_init.FIFOMode = DMA_FIFOMODE_ENABLE;
sd_rx_dma_init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
sd_rx_dma_init.MemBurst = DMA_MBURST_INC4;
sd_rx_dma_init.PeriphBurst = DMA_PBURST_INC4;
// Configure DMA Tx parameters
sd_tx_dma_init.PeriphInc = DMA_PINC_DISABLE;
sd_tx_dma_init.MemInc = DMA_MINC_ENABLE;
sd_tx_dma_init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
sd_tx_dma_init.MemDataAlignment = DMA_MDATAALIGN_WORD;
sd_tx_dma_init.Mode = DMA_PFCTRL;
sd_tx_dma_init.Priority = DMA_PRIORITY_VERY_HIGH;
sd_tx_dma_init.FIFOMode = DMA_FIFOMODE_ENABLE;
sd_tx_dma_init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
sd_tx_dma_init.MemBurst = DMA_MBURST_INC4;
sd_tx_dma_init.PeriphBurst = DMA_PBURST_INC4;
// GPIO have already been initialised by sdcard_init
}
@ -222,7 +213,8 @@ mp_uint_t sdcard_read_blocks(uint8_t *dest, uint32_t block_num, uint32_t num_blo
HAL_SD_ErrorTypedef err = SD_OK;
if (query_irq() == IRQ_STATE_ENABLED) {
dma_init(&sd_rx_dma, DMA_STREAM_SDIO_RX, &sd_rx_dma_init, DMA_CHANNEL_SDIO_RX, DMA_PERIPH_TO_MEMORY, &sd_handle);
dma_init(&sd_rx_dma, DMA_STREAM_SDIO_RX, &dma_init_struct_sdio,
DMA_CHANNEL_SDIO_RX, DMA_PERIPH_TO_MEMORY, &sd_handle);
sd_handle.hdmarx = &sd_rx_dma;
err = HAL_SD_ReadBlocks_BlockNumber_DMA(&sd_handle, (uint32_t*)dest, block_num, SDCARD_BLOCK_SIZE, num_blocks);
@ -254,7 +246,8 @@ mp_uint_t sdcard_write_blocks(const uint8_t *src, uint32_t block_num, uint32_t n
HAL_SD_ErrorTypedef err = SD_OK;
if (query_irq() == IRQ_STATE_ENABLED) {
dma_init(&sd_tx_dma, DMA_STREAM_SDIO_TX, &sd_tx_dma_init, DMA_CHANNEL_SDIO_TX, DMA_MEMORY_TO_PERIPH, &sd_handle);
dma_init(&sd_tx_dma, DMA_STREAM_SDIO_TX, &dma_init_struct_sdio,
DMA_CHANNEL_SDIO_TX, DMA_MEMORY_TO_PERIPH, &sd_handle);
sd_handle.hdmatx = &sd_tx_dma;
err = HAL_SD_WriteBlocks_BlockNumber_DMA(&sd_handle, (uint32_t*)src, block_num, SDCARD_BLOCK_SIZE, num_blocks);