d446d328d8
Fix QSPI on Feather nRF52840
...
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
2018-11-27 00:13:24 -08:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel
2018-11-23 14:22:07 -08:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
52fd151c9c
ports/nrf: enable json module on nrf boards generally
2018-11-22 10:35:57 -06:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
5fe746f643
Latest Feather nRF52840 pin revisions
2018-11-21 19:46:49 -05:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
b67c53edfa
Factor out of external flash as well.
...
Plus some cleanup.
Fixes #1324
2018-11-14 18:30:47 -08:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
47212ee31e
start debug
2018-11-14 17:21:48 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
64d457dad9
bring bleio PR up to date
2018-11-07 14:12:22 -05:00
f24c225664
Merge pull request #1312 from dhalbert/adafruit_nrfx
...
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-11-04 11:42:12 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
e203ce9ce5
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-10-31 23:18:59 -04:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
bbf8334166
Fix build without network code
2018-10-25 13:14:27 +11:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
dc9d338612
Merge pull request #1167 from notro/cpython_stdlib
...
Support CPython standard library
2018-10-24 12:57:41 -07:00
d882ff6328
samd51: Set stack size to 8k
...
This is necessary in order to run unittest.
Heavy tests like those in the stdlib need 12-14k.
2018-10-24 19:33:01 +02:00
1b86e5fc83
samd51: Enable functionality to support CPython stdlib
...
This enables various things in order to support the CPython standard library.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED:
Support NotImplemented for easy conversion of stdlib.
It doesn't do fallbacks though, only raises TypeError.
MICROPY_PY_COLLECTIONS_ORDEREDDICT:
collections.OrderedDict
MICROPY_PY_FUNCTION_ATTRS:
Support function.__name__ for use as key in the function attribute workaround.
MICROPY_PY_IO:
uio module: BytesIO, FileIO, StringIO, TextIOWrapper
Also add 'io' alias.
MICROPY_PY_REVERSE_SPECIAL_METHODS:
Support the __r*__ special methods.
MICROPY_PY_SYS_EXC_INFO:
sys.exc_info() used by unittest when collecting exceptions.
MICROPY_CPYTHON_COMPAT:
Some of the things it adds:
>>> object.__init__
<function>
>>> object.__new__
<function>
>>> object.__class__
<class 'type'>
>>> object().__class__
<class 'object'>
>>> object.__name__
'object'
>>> 'Hello'.encode()
b'Hello'
>>> b'Hello'.decode()
'Hello'
Named tuple field names from string:
namedtuple('Point', 'x y')
2018-10-24 19:33:01 +02:00
cec9a69a15
samd51: Make errno, os, and time module aliases
...
Add alias for uerrno so the user doesn't have to know about the
CircuitPython special names for the module.
Make os and time weak modules (aliases) making it possible to add
functionality to those modules written in python.
Example:
'import os' will now look in the path for an os module and if not found
it will import the builtin module. An os module written in python will
import the builtin module through its name prefixed with an underscore
(_os) following the C module naming practice in CPython.
Also right align the macro values to increase readability making it
easier to compare the values for samd21 and samd51. Even the longest
macro from py/mpconfig.h will fit with this alignment.
2018-10-24 19:31:53 +02:00
554f82fe9b
Merge pull request #1286 from klardotsh/topic-nrf52840-mdk
...
Add support for MakerDiary nRF52840 MDK board
2018-10-22 17:47:14 -07:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
4bc24c4f60
bleio: Fix errors after rebase
2018-10-21 17:15:27 +02:00
eceb21a017
bleio: Don't register the services until needed
...
Because of the very specific way nRF requires service registration
(characteristics can be added only to last added service), we would
have to write the Python code in a specific way. With this patch the
user has more freedom.
2018-10-21 16:00:04 +02:00
19fab4af5a
bleio: Remove deep copy constructor for UUID
2018-10-21 15:59:50 +02:00
b5e5805bb4
bleio: Remove redundant struct field
2018-10-21 15:59:46 +02:00
c7b42d80b3
bleio: A bit of cleanup
2018-10-21 15:59:42 +02:00
cf79316002
nrf: Fix ble uart using the new API
2018-10-21 15:59:36 +02:00
d5a71a4b8a
nrf: Move bluetooth driver to the 'bluetooth' folder
2018-10-21 15:55:25 +02:00
17f13ecc2c
nrf: Cleanup of the ble driver
...
Moved the functions to classes that they belong to.
2018-10-21 15:54:13 +02:00
77eeecbfd9
nrf: BLE driver cleanup
2018-10-21 15:52:36 +02:00
6545aa99a9
nrf: Remove the ble drv specific characteristic struct
2018-10-21 15:51:04 +02:00
98aa8c5923
nrf: Remove the ble drv specific service struct
2018-10-21 15:51:01 +02:00
3df7dea2cc
nrf: Remove the ble drv specific advertisement data struct
2018-10-21 15:50:59 +02:00
4b344812bf
nrf: Remove the ble drv specific address struct
2018-10-21 15:50:56 +02:00
3bd65fbae5
nrf: Move the Peripheral class to bleio as Device
...
This was the last class from ubluepy and so that module is now gone.
The Device class offers both Peripheral and Central functionality.
See the inline docs for more info.
2018-10-21 15:50:45 +02:00
bda734223e
nrf: Move the Service class from ubluepy to the shared bleio module
2018-10-21 15:43:51 +02:00
cc78249226
nrf: Move the Characteristic class from ubluepy to the shared bleio module
2018-10-21 15:43:48 +02:00
61bf4a16a7
nrf: Remove unused ubluepy classes
2018-10-21 15:43:39 +02:00
1c6bf9a150
bleio: Move the Scanner class to a shared module
2018-10-21 15:43:29 +02:00
7390dc7dab
bleio: Move ScanEntry to shared module and add a new AdvertisementData class
2018-10-21 15:43:24 +02:00
345334aaf1
bleio: Add a new Address class
...
Use the new in the Adapter singleton.
2018-10-21 15:43:21 +02:00
d5f942a971
bleio: Add a AddressType enum-like class
2018-10-21 15:43:17 +02:00
20b8d5169d
nrf: Move the Descriptor class from ubluepy to the shared bleio module
2018-10-21 15:43:13 +02:00
f4940c9aec
nrf: Move the UUID class from ubluepy to the shared bleio module
...
Also added a UUIDType enum-like class for determining UUID type.
2018-10-21 15:43:08 +02:00
aefabc5353
Update docs to reflect proper size of device
2018-10-20 03:29:20 -07:00
4c75a60bd3
Declobber a DEFINE
2018-10-20 02:57:17 -07:00
16ca9c8c7c
Makefile fixes and some docs
2018-10-20 02:43:13 -07:00
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK
2018-10-20 02:43:12 -07:00
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
298756eef8
Merge pull request #1280 from tannewt/precondition_dac
...
Ramp values to and from a default value while active.
2018-10-17 15:00:11 -04:00
8161178415
Merge pull request #1275 from ElectronicCats/board-meowmeow
...
Added board Meow Meow by Electronic Cats
2018-10-17 11:41:57 -07:00
4eb1fe18e5
Tweaks from feedback:
...
* default_value is now quiescent_value
* Use step = -step format for sign switch
* Add note about analogout_reset being empty
2018-10-17 11:31:08 -07:00
c209165d43
Ramp values to and from a default value while active.
...
This reduces the popping sound on initial playback of an audio
sample.
The M4 DAC has a pop on startup that cannot be prevented. It also
does not allow readback so current values of the DAC are ignored.
Fixes #1090
2018-10-16 16:23:29 -07:00
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
c69b67f453
Merge pull request #1277 from dhalbert/nrf-pulseout
...
PulseOut working
2018-10-16 10:19:55 -07:00
b3c7746a7f
fix copyright notice
2018-10-16 11:09:37 -04:00
2262efc311
PulseOut working
2018-10-16 11:05:02 -04:00
a15f3361aa
add mechanism for timer ticks in NICs
2018-10-16 23:09:25 +11:00
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
8b531f3fba
Merge pull request #1263 from tannewt/trellis_m4_revD
...
Support rev D for the Trellis M4 Express
2018-10-10 23:34:59 -04:00
aab28748bb
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-11 14:19:10 +11:00
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
e5d2fae801
Merge pull request #1261 from jepler/esp8266-prebuilt-sdk
...
esp8266/README: comment on the specific binary SDK used
2018-10-10 12:03:12 -07:00
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
8d58093328
Merge pull request #1259 from dhalbert/nrf-pwmout
...
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-10 12:27:27 -04:00
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master
...
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
2018-10-09 23:58:43 -07:00
ca737e6f7c
Don't disable tempoarily in deinit().
2018-10-09 21:23:47 -04:00
012cc466a4
esp8266/README: comment on the specific binary SDK used
2018-10-09 20:17:38 -05:00
91a88cf568
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-09 20:52:55 -04:00
Scott Shawcroft
sabas1080
Jeff Epler
Dan Halbert
Benjamin Shockley
Noralf Trønnes
Scott Shawcroft
ATMakersBill
Bryan Siepert
Nick Moore
arturo182
Josh Klar
Josh Klar
Paul Sajna
Jeff Epler