This adds support for the LEGO Hub No. 7, aka LEGO Technic Small hub, aka
LEGO SPIKE Essential hub. This board is largely similar to Hub No. 6:
- Same MCU (STM32F413 - different packaging with fewer pins).
- Same Bluetooth chip (TI CC2564).
- Same IMU chip.
- Similar external flash chip - 4MiB instead of 32MiB.
- 2 I/O ports instead of 6.
- No display - only status and battery LEDs.
- Different LED driver chip.
- Only 1 button which is also the power button.
- No speaker.
Signed-off-by: David Lechner <david@pybricks.com>
This adds configurable macros to define the timer and channel used to
provide the Bluetooth 32768 MHz clock. This will allow code to be shared
with LEGO_HUB_NO7.
Signed-off-by: David Lechner <david@pybricks.com>
This changes spiflash.py to read the flash chip ID at runtime to select the
read/write/erase commands. This will allow the code to be shared with
LEGO_HUB_NO7 which doesn't use the 32-bit commands.
Also remove an unused constant while we are touching this.
Signed-off-by: David Lechner <david@pybricks.com>
This changes appupdate.py to get the filesystem size at runtime. This will
allow the code to be shared with LEGO_HUB_NO7 which has a similar flash
chip with a different size.
Signed-off-by: David Lechner <david@pybricks.com>
This changes all uses of pins to use the alias names of the pins. This
makes the code easier to understand and will also allow sharing more code
with LEGO_HUB_NO7.
Signed-off-by: David Lechner <david@pybricks.com>
Also use mkrules.mk's submodule target rather than duplicating the call to
`submodule sync`.
Until we can find a way to use idf.py/cmake to discover submodules we have
no way to discover optional or board-specific submodules so need to err on
the side of including everything.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Used to be special-cased for Pico, but now everything depends on
micropython-lib if it's using a frozen manifest.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Several boards now depend on libraries from micropython-lib. Rather than
expecting micropython-lib to be available as a sibling of the micropython
repo, instead make it a submodule.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Document how to connect the Timer block BRK_IN to a physical Pin alternate
function.
Add an example of PWM Motor drive using complementary outputs with dead
time and break input to kill the PWM and generate a callback.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
Some Pin alternate functions are inputs, for example, timer capture and
break inputs. In Pyb.Pin the only way to set alt mode is with Pin.AF_PP or
Pin.AF_OD. It is not intuitive to use an output mode to configure an
input. Pin.ALT is used in the machine.Pin class and works in pyb.Pin.
The examples are changed to use Pin.ALT because TIM2_CH3 can be a capture
input or pulse output.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
Remove out of context callback paragraph, it was part of the wipy docs.
And move the paragraph about PULL_UP/PULL_DOWN resistor values to within
the init() method docs. Also fix pull-pull -> push-pull.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size. However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.
Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
This adds #ifdefs around each of the mp_hal_* time functions for the unix
port. This allows variants to override individual functions as needed.
Signed-off-by: David Lechner <david@pybricks.com>
Still see some USB issues apparently caused by delays loading wifi
firmware. cyw43_delay_ms is used to wait in the driver, so we should call
the event hook in there.
Fixes#8963.
Formerly, py/formatfloat would print whole numbers inaccurately with
nonzero digits beyond the decimal place. This resulted from its strategy
of successive scaling of the argument by 0.1 which cannot be exactly
represented in floating point. The change in this commit avoids scaling
until the value is smaller than 1, so all whole numbers print with zero
fractional part.
Fixes issue #4212.
Signed-off-by: Dan Ellis dan.ellis@gmail.com
On ports with more than one filesystem, the type will be wrong, for example
if using LFS but FAT enabled, then the type will be FAT. So it's not
possible to use these classes to identify a file object type.
Furthermore, constructing an io.FileIO currently crashes on FAT, and
make_new isn't supported on LFS.
And the io.TextIOWrapper class does not match CPython at all.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The state machines were not properly restarted in the case that the same
PIO program was shared among multiple StateMachine instances. This is
because only the first StateMachine to use the program would set the
rp2_state_machine_initial_pc variable.
See https://forum.micropython.org/viewtopic.php?f=21&t=12776&p=69464#p69464
This commit simplifies mp_obj_get_complex_maybe() by first calling
mp_obj_get_float_maybe() to handle the cases corresponding to floats.
Only if that fails does it attempt to extra a full complex number.
This reduces code size and also means that mp_obj_get_complex_maybe() now
supports user-defined classes defining __float__; in particular this allows
user-defined classes to be used as arguments to cmath-module function.
Furthermore, complex_make_new() can now be simplified to directly call
mp_obj_get_complex(), instead of mp_obj_get_complex_maybe() followed by
mp_obj_get_float(). This also improves error messages from complex with
an invalid argument, it now raises "can't convert <type> to complex" rather
than "can't convert <type> to float".
Signed-off-by: Damien George <damien@micropython.org>
Fixes:
- Should read `definitions` rather than `defintions`.
- Should read `resolution` rather than `resoultion`.
- Should read `inefficient` rather than `inefficent`.
- Should read `closed` rather than `closded`.
Signed-off-by: Tim Gates <tim.gates@iress.com>
The device will respond to a non-WS request with a simple page that loads
websocket_content.js from a static host (http or https). However, even
if the resources are https, the page is still http and therefore allows
requesting to a WS (not WSS) websocket on the device.
Removed unused client_handshake from websocket_helper, and then merges the
remainder of this file (server_handshake) into webrepl.py (to reduce
firmware size). Also added the respond-as-HTTP handling to
server_handshake.
The default HTTP response is a simple page that sets the base URL and then
loads webrepl_content.js which document.write's the actual HTML.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
With a new option to evenly split the GC heap over multiple areas. This
adds code coverage for gc_add() and code associated with
MICROPY_GC_SPLIT_HEAP.
Use C macros to reduce the size of firmware images when the GC split-heap
feature is disabled.
The code size difference of this commit versus HEAD~2 (ie the commit prior
to MICROPY_GC_SPLIT_HEAP being introduced) when split-heap is disabled is:
bare-arm: +0 +0.000%
minimal x86: +0 +0.000%
unix x64: -16 -0.003%
unix nanbox: -20 -0.004%
stm32: -8 -0.002% PYBV10
cc3200: +0 +0.000%
esp8266: +8 +0.001% GENERIC
esp32: +0 +0.000% GENERIC
nrf: -20 -0.011% pca10040
rp2: +0 +0.000% PICO
samd: -4 -0.003% ADAFRUIT_ITSYBITSY_M4_EXPRESS
The code size difference of this commit versus HEAD~2 split-heap is enabled
with MICROPY_GC_MULTIHEAP=1 (but no extra code to add more heaps):
unix x64: +1032 +0.197% [incl +544(bss)]
esp32: +592 +0.039% GENERIC[incl +16(data) +264(bss)]
This commit adds a new option MICROPY_GC_SPLIT_HEAP (disabled by default)
which, when enabled, allows the GC heap to be split over multiple memory
areas/regions. The first area is added with gc_init() and subsequent areas
can be added with gc_add(). New areas can be added at runtime. Areas are
stored internally as a linked list, and calls to gc_alloc() can be
satisfied from any area.
This feature has the following use-cases (among others):
- The ESP32 has a fragmented OS heap, so to use all (or more) of it the
GC heap must be split.
- Other MCUs may have disjoint RAM regions and are now able to use them
all for the GC heap.
- The user could explicitly increase the size of the GC heap.
- Support a dynamic heap while running on an OS, adding more heap when
necessary.
If the Bluetooth stack runs on another OS thread then synchronous BLE irq
callbacks, which block the Bluetooth stack until the callback to Python is
complete, must coordinate with the main thread and configure the
MicroPython thread-local-state.
This commit adds MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS_WITH_INTERLOCK which
can be enabled if the system has these requirements.
Signed-off-by: Damien George <damien@micropython.org>
1. Add -Wno-array-bounds to avoid false positive on gcc 12.1; see related
issue #8685.
2. Remove always-true not-NULL-check (Msg.Rsp.Args.Common.Bssid is an array
not a pointer).
3. Fix pointer-to-freed-stack in wlan_set_security.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Originally in drivers/ninaw10/nina_wifi_bsp.c but that isn't a QSTR source.
Also remove outdated commment about root pointers in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a statically-allocated UART (see machine_uart.c), and doesn't
contain any heap pointers other than the ringbufs (which are already root
pointers), so no need to track it additionally.
Saves needing to add mpbthciport.c to the QSTR sources.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This fixes two problems with the BTstack implementation of descriptor
discovery:
- The call to gatt_client_discover_characteristic_descriptors needs to have
value_handle set to the starting handle (actually characteristic handle)
to start the search from.
- The BTstack event for a descriptor query result is
GATT_EVENT_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY_RESULT.
With this change the test tests/multi_bluetooth/ble_subscribe.py now passes
when BTstack is instance1 (for BTstack to pass as instance0 requires
gatts_write to support sending an update on BTstack).
Signed-off-by: Damien George <damien@micropython.org>
Add cert_reqs and cadata keyword-args to ssl.wrap_socket() and
ssl.CERT_NONE, ssl.CERT_OPTIONAL, ssl.CERT_REQUIRED constants to allow
certificate validation.
CPython doesn't accept cadata in ssl.wrap_socket(), but it does in
SSLContext.load_verify_locations(), so we use this name to at least match
the same name in load_verify_locations().
Add docs for these new arguments, as well as docs for the existing
server_hostname argument which is important for certificate validation.
Tests are added as well.
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
