This allows you to initialize usb_host.Port once successfully and
then returns the same object as long as you pass the same arguments
in. It does allow you to fix incorrect pins but not switching from
one valid set to another. (It needs a reset for that.)
This also moves hcd cache operations to RAM so that they don't
access the cache when doing maintenance.
and re-organize so that esp32 s2/s3 don't do as much at reset
.. it's not necessary (because most data is in esp-idf managed memory)
and doing this saves me from having to debug why reconstruct isn't working
properly on that platform.
This needs to be tested on other platforms again before being merged!
This adds a script to generate the peripherals files (except clock).
It adds support for the 1015, 1020, 1040, and 1050 EVKs.
Some work was started on 1176 but it isn't working. So, the board
def is in a separate branch.
Fixes#3521. Fixes#2477.
This brings in support to publish packages to PyPI, adds missing metadata
and fixes aioble descriptor flags.
Signed-off-by: Damien George <damien@micropython.org>
This brings in the following new modules: hs3003, bmi270, bmm150, cbor2
and senml. It also refactors lsm6dsox and lsm9ds1.
Signed-off-by: Damien George <damien@micropython.org>
Only uppercase ASCII letters a-z. This saves ~900 bytes. Previously
written files with other unicode letters will only be accessible
from their upper cased path.
Changes since the previous version:
- add an API to get the BSSID
- support auto channel selection when using BSSID for join
- improve performance for the Murata 1DX module and SDIO
- return EINVAL for invalid auth type
- add support for Bluetooth over SPI
- convert 4343WA1-7.45.98.50.combined to C header files
This may help address #7409 if the underlying cause is the deterministic
volume ID. However, not all boards have working urandom (samd21
at least does not) so a couple of fallbacks are attempted when it fails.
I verified that on a pico_w, each `storage.erase_filesystem()` gives
a distinct 32-bit volume ID (pico_w's urandom can never fail)
Changes since the previous version:
- remove mDNS
- implement lwIP IGMP MAC filter callback
- implement IPv6 support
- allow building with IGMP disabled
- fix handshake meggase WAIT_G1 event value
- increase EAPOL timeout from 2500ms to 500ms
- add function to get RSSI
- fix handling of open security networks
- remove support for automatically setting auth type
Signed-off-by: Damien George <damien@micropython.org>
This update includes a few bug fixes for BLE, support for LE audio, updates
to classic BT support, cmake support, and other things.
Signed-off-by: Damien George <damien@micropython.org>
This brings in mip-cmdline, espflash, use of machine.dht_readinto, and
other improvements to existing libraries.
Signed-off-by: Damien George <damien@micropython.org>
Changes in this new library version are:
- Add L1 HAL at v1.10.3.
- H7_HAL/rcc_ex: Add SPI45 to HAL_RCCEx_GetPeriphCLKFreq.
- L4_HAL/gpio_ex: Add #define for GPIO_AF14_TIM2 on L4P5/L4Q5.
- F4_HAL/i2c: Fix I2C frequency calculation macros.
- L1_HAL/utils: Fix compile error when USE_HAL_DRIVER is defined.
There don't seem to be many changes going from v2.1.2 to v2.1.3 of lwIP.
Mostly they are:
- IPv6 fixes and improvements
- changes to apps and other code that MicroPython doesn't use
- comments and tests
- minor bug fixes
In particular there doesn't look to be any change to the API of any
function used by MicroPython.
Network multi tests pass on PYBD_SF2 and PYBD_SF6. PYBD_SF2, PYBD_SF6 and
PICO_W have unchanged iperf3 performance. Similar results for networking
on the mimxrt port.
Signed-off-by: Damien George <damien@micropython.org>
Several boards now depend on libraries from micropython-lib. Rather than
expecting micropython-lib to be available as a sibling of the micropython
repo, instead make it a submodule.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Dan Halbert
Scott Shawcroft
Jeff Epler
Damien George
iabdalkader
gamblor21
MicroDev
David Lechner
Jim Mussared
yn386
Melissa LeBlanc-Williams
Peter Harper
robert-hh