43dae6c8d1
Merge pull request #5951 from dhalbert/track-board-default-objects
...
Track creation of board.I2C(), etc.
2022-01-31 14:29:19 -08:00
20a17bec25
shrink arduino_mkrzero and sparkfun_samd21_dev
2022-01-31 09:16:03 -05:00
93a60eecab
Merge pull request #5946 from tammymakesthings/pr4218-neopixel-show-after-deinit
...
Fixes neopixel show() after deinit() not raising an exception
2022-01-29 18:30:37 -05:00
a88969d306
Revert "Disabled audioio, audiobusio, USB midi for sparkfun_redboard_turbo to save flash space"
...
This reverts commit 5e2166673b
2022-01-29 17:06:26 -05:00
6e98186f0d
turn off more things on SAMD21 full builds
2022-01-29 17:05:51 -05:00
5e2166673b
Disabled audioio, audiobusio, USB midi for sparkfun_redboard_turbo to save flash space
2022-01-29 14:31:58 -07:00
19f9163892
Bringing branch up to date with current main
2022-01-25 11:02:00 -07:00
60801066b2
Fix magtag, openbook for EPaperDisplay constructor
2022-01-24 12:34:01 -07:00
9a353a4f56
Merge pull request #5422 from Neradoc/nera-secondary-I2C
...
Allow multiple board buses
2022-01-21 11:08:14 -08:00
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
fed5227de9
shrink stringcar_m0_express
2022-01-20 20:34:04 -05:00
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
d5ca7f0348
Merge pull request #5842 from dhalbert/pdmin-fix
...
Fixes SAMD PDMIn
2022-01-12 10:50:04 -08:00
dd54e8f657
PDMIn: enable IRQ; need a volatile; call pdmin_reset()
...
enable IRQ for PDMIn
2022-01-12 11:44:43 -05:00
1fb4f02de2
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-06 16:32:17 -05:00
9d2a32d07e
countio: add selectable rise and fall detection, pulls
2021-12-31 16:34:58 -05:00
34e8bfd09e
explicitly use mpz long ints on this board
2021-12-27 16:39:04 -06:00
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
325c2161e9
shrink CPX crickit build
2021-12-23 12:24:16 -05:00
bbe30514ef
Fix other INTENCLR and INTENSET to write whole reg
2021-12-12 22:25:44 -05:00
c06eee9841
Clear TAMPER interrupt properly; make keypad module table const
2021-12-12 22:00:08 -05:00
b6858e4ca7
allow multiple board buses
...
Co-authored-by: Neradoc <neraOnGit@ri1.fr>
2021-12-11 23:07:21 +05:30
e0e3224253
forgot a check for BOARD_HAS_CRYSTAL
2021-12-07 15:42:31 -05:00
7e21344cf0
fix FrequencyIn for crystalless boards and simplify clock logic
2021-12-07 13:12:24 -05:00
92bb909bf0
add a frequencyin_reset() for VM restart
2021-12-05 17:06:42 -05:00
e8ea9c75a1
check for missing pins; deinit txrx leds
2021-11-30 19:16:21 -05:00
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
95c09ac66f
Merge pull request #5610 from tannewt/rpi
...
Initial broadcom port for Raspberry Pi
2021-11-24 19:02:23 -05:00
e6a68cc4a7
Shrink 3 SAMD builds by disabling onewireio
2021-11-24 14:27:49 -08:00
a1052d5f73
Initial broadcom port for Raspberry Pi
...
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.
There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
and unnecessary for the vast majority of builds.
Fixes #4314
2021-11-22 14:54:44 -08:00
582a923ec9
Merge pull request #5579 from jepler/fix-optimization-same54
...
same54: Use the same optimization as other sam d5x/e5x
2021-11-16 08:32:08 -05:00
73430af78b
-O2 without -fno-inline-functions
2021-11-15 22:36:23 -05:00
1039e1116b
same54: Use the same optimization as other sam d5x/e5x
...
It's likely that this is a relic of my early testing.
2021-11-12 18:54:56 -06:00
dfef5014ed
enable rainbowio with newly free space
2021-11-12 17:31:12 -06:00
b5dd8891e2
turn off `onewireio` on `feather_m0_adalogger`
2021-11-12 20:02:22 +05:30
adac5ee596
Merge pull request #5563 from jepler/enable-error-missing-prototypes
...
Additional missing-prototypes fixes
2021-11-11 11:57:43 -05:00
cd6599ce65
A few more missing-prototypes fixes
2021-11-11 08:42:30 -06:00
f058c5ec8c
fix kicksat-sprite
2021-11-10 23:05:06 -05:00
340d6b9213
more missing-prototypes fixes
2021-11-10 21:00:17 -06:00
e7d9dc323b
shrink kicksat-sprite, simmel, pyb_nano_v2
2021-11-10 21:12:41 -05:00
58485bc0b1
Switch SAMD51 and SAME51 back to -Os from -O2
...
The SAMx51 builds were getting very close to full on larger translations. This PR
adds 1400 bytes of enabled features, and pushed some over the edge.
2021-11-10 16:00:38 -05:00
ebc8359c67
disable missing-prototypes diagnostics in yet another tinyusb file
2021-11-10 12:47:55 -06:00
5cba23e04d
More missing-prototypes fixes
2021-11-10 12:22:07 -06:00
621953c960
Additional missing-prototypes fixes
...
I think this correctly enables missing-prototypes in atmel-samd
and raspberrypi ports.
2021-11-10 10:55:53 -06:00
a69496b0e7
Merge pull request #5562 from microDev1/traceback
...
Refactor traceback handling
2021-11-10 11:53:35 -05:00
53a68f7ce6
turn off `onewireio` on `arduino_nano_33_iot`
2021-11-10 20:25:46 +05:30
63fbf98186
Enable -Wmissing-prototypes for atmel-samd
2021-11-09 20:05:00 -06:00
bb71f8c9b3
Merge pull request #5544 from jepler/alphablend
...
bitmaptools: add alphablend
2021-11-08 10:50:03 -08:00
6790f95953
Fix disabling of FRAMEBUFFERIO on atmel-samd
...
.. this needs to imply the disabling of RGBMATRIX too
2021-11-05 15:19:01 -05:00
43b593725b
atmel-samd: Fix converting watchdog seconds to cycles
...
It's intended that the actual timeout always be at least the requested
timeout. However, due to multiplying by the wrong factor to get from
seconds to cycles, a timeout request of e.g., 8.1s (which is less than
8.192s) would give an actual timeout of 8, not 16 as it should.
2021-11-05 11:40:08 -05:00
Scott Shawcroft
Dan Halbert
Dan Halbert
Tammy Cravit
Dan Kulinski
microDev
Scott Shawcroft
Brian Dean
Jeff Epler
Timon