Commit Graph

30 Commits

Author SHA1 Message Date
Andrew Scheller 902d9552c5 Replace some Makefile commands with variables in py/mkenv.mk 2014-04-07 01:35:45 +01:00
Damien George a12be917a4 stmhal: Add timer module; move servo PWM from TIM2 to TIM5.
As per issue #257, servo is better on TIM5 because TIM2 is connected to
more GPIO.
2014-04-02 15:09:36 +01:00
Damien George 09d207785c stmhal: Unify naming of HW config; make SD detect configurable.
All board config macros now begin with MICROPY_HW_.

Renamed PYBv10 to PYBV10, since macros should be all uppercase.

Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD
detect pin can be easily configured.
2014-03-30 12:30:35 +01:00
Damien George 038df43183 stmhal: Implement selector for USB device mode; improve boot up.
Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID.
Choice is made by an option in boot.py, with default being CDC+MSC.
HID+MSC is not currently supported, but should be easy to implement.

Boot up now has ability to change the reset mode: hold down USR switch
while booting and LEDs will count from 1 to 7 to indicate the boot mode.
Release USR when correct mode is selected.  Current modes are 1 (normal
boot), 2 (safe mode), 3 (reset FS mode).
2014-03-30 00:00:15 +00:00
Damien George c9fd6645b0 stmhal: Factor out stdio and readline to separate files.
Adds readline_init() to clear readline history on soft reset.  Addresses
issue #387.
2014-03-29 14:20:05 +00:00
Damien George 6cfda3084d stmhal: Add I2C support; change accel driver to use new I2C. 2014-03-25 23:26:14 +00:00
Damien George caac542b23 Proper support for registering builtin modules in ROM.
Comes with some refactoring of code and renaming of files.  All modules
are now named mod*.[ch].
2014-03-25 14:18:18 +00:00
Dave Hylands 1403298a65 stmhal - fixed up adc stuff
Added support for the ADC channels and mappings to make_pins.py

I'm not sure if the hal properly deals with the channel 16/18 differences
between the 40x and 42x. It seems to deal with it partially. This particular
aspect will need testing on a 42x or 43x.
2014-03-24 11:16:35 -07:00
Damien George b13492f8ad stmhal: Add DAC driver. 2014-03-24 15:15:33 +00:00
Damien George 5fd2ebbbdd stmhal: Update help function. 2014-03-24 11:27:56 +00:00
Damien George 02fa035800 stmhal: Add input() and pyb.input() functions. 2014-03-22 23:53:50 +00:00
Damien George 626f6b8133 stmhal: Add servo driver. 2014-03-22 15:52:33 +00:00
Damien George d311655655 stmhal: Add time module with sleep function. 2014-03-22 15:06:29 +00:00
Damien George ad7b84a7b9 stmhal: Add os module with a few basic functions. 2014-03-22 14:56:32 +00:00
Damien George 684164a8cf stmhal: Add PYBv10 config; add RNG support. 2014-03-22 13:41:02 +00:00
Damien George fb25c2d95f stmhal: USB CDC and MSC device work together. 2014-03-22 12:32:54 +00:00
Damien George 8913c04831 stmhal: Add support for USB MSC device.
This gives a functioning, independent MSC device.
2014-03-21 23:32:01 +00:00
Damien George f78d9b1a72 stmhal: Add accelerometer driver; fix bug with LFN. 2014-03-20 23:33:30 +00:00
Damien George 494600bc99 stmhal: Add lcd.c to Makefile, and init LCD in main. 2014-03-19 13:12:30 +00:00
Damien George b92d3e1fde stmhal: Add fatfs support, working with flash and SD card. 2014-03-17 14:04:19 +00:00
Damien George 9e5ea4d768 stmhal: Add flash write support and flash storage driver. 2014-03-17 13:31:35 +00:00
Damien George fb431bf556 stmhal: Add SD card support.
Just low-level read/write support.  No filesystem yet.
2014-03-17 13:03:41 +00:00
Damien George 8b96af6907 stmhal: Get RTC working. 2014-03-15 12:54:48 +00:00
Damien George e285511a23 stmhal: Get USB CDC REPL working.
New USB HAL is quite a bit improved over previous one.  Now has better
callbacks and flow control.

REPL over USB CDC now works as before, except for soft-reset (since USB
driver uses malloc...).
2014-03-15 11:52:29 +00:00
Dave Hylands ca5444e6cd stmhal - add pin mapping, gpio, exti, usrsw 2014-03-14 23:41:28 -07:00
Damien George b30c02afa0 stmhal: Get USB enumerating a CDC device.
Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-14 00:30:37 +00:00
Dave Hylands ef39f2d9ca Cleanup systick for stmhal 2014-03-13 14:40:49 -07:00
Dave Hylands f14b92b9e1 REPl working on UART6 with STMHAL 2014-03-12 18:15:55 -07:00
Damien George 4ef1dbcbf6 stmhal: Get SysTick and HSE working. 2014-03-12 21:59:33 +00:00
Dave Hylands dd38d90724 Initial checkin with STM HAL
This compiles and links, but hasn't been tested on a board
yet and even if it was run, it doesn't currently do anything.
2014-03-11 23:55:41 -07:00