2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
3bf4b42e2e
change OH20 badge pin defs to use SWn for buttons
...
Rather than use A, B, C and D
Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
0a54f88751
add pin defs for buttons on the OHS2020 badge
2020-02-10 00:32:16 +01:00
acef93a253
Rename eveL to _eve, EVEL to _EVE
2020-02-05 18:17:58 -08:00
7fd30e7d20
First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
...
[adafruit/circuitpython#2578 ]
2020-02-03 16:46:14 -08:00
5a29b222eb
add bluefruit sense - tested
2020-02-03 13:52:30 -05:00
64cafe82bc
Adjust OHS2020 madctl for default rotation
...
Make to go faster I guess.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
6804b2a7fd
Add I2C pin definitions for interoperability with Adafruit libraries
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
33dcdd7c03
Updates to enable working SPI TFT
...
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.
As fixed the improper SPI bus pins definitions and it works!
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
d99c2ffe4f
QSPI flash fixes
...
We had the pin names swapped on the schematic and a different flash was populated.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
dc964b346c
adjust CLUE madctl so rotation 0 is 'right'
2020-01-31 20:17:39 -05:00
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
4abd5f1f7b
increase max connections from 2 to 5
2020-01-31 14:58:23 -05:00
b6358182d3
Update CLUE to Rev C
2020-01-30 15:22:26 -05:00
df5e58fc6e
Add support for the Particle Ethernet FeatherWing
2020-01-28 10:53:50 +01:00
f2dfcee042
add missing displayref
2020-01-26 20:10:20 -05:00
68f9aee992
reset NeoPixels on CPB on soft reload
2020-01-23 20:16:31 -05:00
cc77e86408
Update the VID and USB company string
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 15:43:49 -08:00
cc03d68984
Fix backlight pin registration
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 14:53:07 -08:00
86d454adf3
Initial board support for OHS2020 Badge
...
Not tested but builds.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 13:46:56 -08:00
4bf10a75c7
Add board definition files for AramCon Badge 2019
2020-01-16 00:44:18 +02:00
82fb761c0f
Add PacketBuffer and MTU negotiation support.
...
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.
This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
2020-01-03 17:29:54 -08:00
f0d34da556
add display support; rotation 270
2019-12-30 17:39:39 -05:00
3f9ebd2fed
initial CLUE board defn
2019-12-30 17:10:42 -05:00
2abccc1745
update vid and pid for teknikio_bluebird
2019-12-16 08:58:56 -05:00
32744a04e1
update bluebird make file
2019-12-13 09:08:21 -05:00
3992a870e5
Merge branch 'master' into teknikio/bluebird
2019-12-13 08:55:15 -05:00
4bee6536c9
updates to bluebird
2019-12-13 08:52:03 -05:00
b484c89b73
Merge pull request #4 from adafruit/master
...
Pull master
2019-12-13 08:51:06 -05:00
e11fabd5e0
moved nrf internal filesystem to just below bootloader
2019-12-12 14:57:23 -05:00
dde7c5e145
Merge branch 'master' of https://github.com/Teknikio/circuitpython
2019-12-12 08:59:37 -05:00
bf4138b0e4
Merge pull request #3 from adafruit/master
...
Pull master
2019-12-12 08:59:22 -05:00
0da5dceccf
update bluebird makefile
2019-12-11 15:25:16 -05:00
a273a7c55e
add remaining peripheral pin maps and digital/analog pin definitions
2019-12-11 15:23:16 -05:00
006d85d5c2
add make file and board configuration, add accelerometer pin mappings
2019-12-11 14:49:59 -05:00
d9ca4c9a60
fix build failures
2019-12-10 22:39:44 -05:00
c6221c5956
Remove no-longer-used nrf and atmel-samd .ld files
2019-12-10 21:22:17 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
013c840862
working on all ports
2019-12-10 20:27:30 -05:00
60f399395a
Add POWER_SWITCH pin to CPB
2019-12-09 18:30:24 -05:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
ba83a4a2ac
Merge pull request #1 from adafruit/master
...
Update base
2019-11-05 11:06:18 -05:00
8ab3ef44dd
add bluebird template files
2019-11-05 10:52:25 -05:00
8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks
...
Refine _bleio
2019-11-04 22:27:54 -05:00
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable
...
cpb: Disable the onboard speaker until request
2019-11-03 18:34:29 -05:00
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
2bdccf03a7
cpb: define the SPEAKER_ENABLE_PIN
...
This allows the board to disable the onboard speaker until explicitly
enabled in user code.
Testing performed on a CPB:
* Touching the AUDIO pin with a fingertip no longer generates noise/buzz
* Generating a waveform with `simpleio.tone` produces no sound by default
* When the board.SPEAKER_ENABLE is configured as a digital output and
set True, `simpleio.tone` does produce sound
Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to
speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
speaker_enable.direction = digitalio.Direction.OUTPUT
speaker_enable.value = True
before using the internal speaker.
Closes : #2258
2019-11-01 16:26:03 -05:00
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks
2019-11-01 13:20:58 -07:00
e35eb08f1d
nrf: allocate two I2C on CPB
2019-10-28 21:08:53 -04:00
358920db0e
Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only
2019-10-28 10:40:10 -04:00
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express
...
Initial Itsy nRF52840 defn
2019-10-27 16:46:28 -05:00
ab6fd34828
add object types to rgb status objects;mark spi rgb objects as never_reset
2019-10-25 22:32:43 -04:00
7d04d9109e
use bitbang SPI for DotStar; still need to fix hw SPI for dotstar
2019-10-25 15:37:27 -04:00
cdeb0857a9
Initial Itsy nRF52840 defn
2019-10-25 11:15:34 -04:00
ae30a1e5aa
Refine _bleio
...
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.
It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.
Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.
Relates to #586
2019-10-21 18:57:03 -07:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
fc19e03128
WIP: bonding
2019-10-06 21:30:26 -04:00
aa1eed3bd3
initial Arduino Nano 33 BLE board definition
2019-09-26 15:28:57 -04:00
3c22c690c8
CPB A1 pin mapping wrong; remove A7
2019-09-06 14:17:11 -04:00
0b7291d767
fix default crystal value; fix include order
2019-08-22 09:01:05 -04:00
acc6df4959
merge similar fix in
2019-08-22 01:29:34 -04:00
d94023e9b3
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 01:04:00 -04:00
85d7398476
Merge pull request #2066 from dhalbert/ble-pairing
...
BLE: more features
2019-08-16 14:50:00 -07:00
5877bd6036
CPblue initial definition
2019-08-13 22:12:36 -04:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
c56566179a
Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files
2019-08-05 18:10:27 -04:00
28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
...
Blip improvements
2019-07-19 10:52:08 -07:00
724ce4acba
enable libraries needed by BlipBoy Shield
2019-07-19 18:48:08 +05:30
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
af0f1a7542
Update pins.c
...
whitespace
2019-01-16 15:02:48 +11:00
c2d39a7ab7
Update pins.c
2019-01-16 14:58:16 +11:00
ac238838f2
Update pins.c
...
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
7296b647ef
Add MDK nRF52840 MDK USB Dongle support.
...
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/ .
A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
b6b5ed9c89
Remove nRF52832 support
2018-12-30 22:49:20 -05:00
55084b30ef
remome FRAMEBUF from nrf builds - use QSPI for particle ARGON
2018-12-27 09:38:35 -05:00
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.
2018-12-10 20:32:19 -08:00
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840
2018-12-10 20:13:36 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
b25bf062fb
Add correct flash chip for Particle Mesh boards
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
09316b35d7
remove non-broken-out nrf pins. re-organize pins.c list.
2018-11-30 14:58:36 -07:00
f67814fc97
Adding SparkFun nRF52840 Mini board support.
2018-11-30 13:57:22 -07:00
d446d328d8
Fix QSPI on Feather nRF52840
...
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
2018-11-27 00:13:24 -08:00
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel
2018-11-23 14:22:07 -08:00
5fe746f643
Latest Feather nRF52840 pin revisions
2018-11-21 19:46:49 -05:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
64d457dad9
bring bleio PR up to date
2018-11-07 14:12:22 -05:00
d5a71a4b8a
nrf: Move bluetooth driver to the 'bluetooth' folder
2018-10-21 15:55:25 +02:00
aefabc5353
Update docs to reflect proper size of device
2018-10-20 03:29:20 -07:00
4c75a60bd3
Declobber a DEFINE
2018-10-20 02:57:17 -07:00
16ca9c8c7c
Makefile fixes and some docs
2018-10-20 02:43:13 -07:00
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK
2018-10-20 02:43:12 -07:00
f724647a45
fix feather nrf52840 build error
2018-09-25 17:09:54 +07:00
2f0e0bdcaf
migrate serial from uart to uarte
2018-09-25 16:14:44 +07:00
7a1b4ccc9b
Merge branch 'master' into nrf52_uart_io
2018-09-24 12:50:48 +07:00
c5593ec074
got uart tx work
2018-09-19 17:59:15 +07:00
1df3bcf392
add board.UART() function
2018-09-19 14:40:37 +07:00
d8c8c5f005
remove CFG_HWUART_FOR_SERIAL
2018-09-18 20:26:50 +07:00
7e8816ad6f
Add VOLTAGE_MONITOR alias to pin D31/A7
2018-09-13 23:46:47 +02:00
e335c74ac6
use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage
2018-09-09 15:01:28 -04:00
4382389e6f
fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards
2018-09-01 00:29:36 -04:00
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
ded38d30b6
rename pin.h to nrf_pin.h to avoid conflict with Pin.h
2018-08-26 20:37:12 -04:00
4cc33f8de6
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
2018-08-23 16:25:57 -04:00
7961103ee6
update SD to v6.1.0
2018-08-22 21:51:30 +07:00
eaf4d19dbb
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
...
Merge #1137
2018-08-22 10:24:10 -04:00
a516d1123f
fix typos
2018-08-22 19:42:41 +07:00
fc955b1591
remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader
2018-08-22 15:22:17 +07:00
c503cf990b
forgot to change .travis.yml
2018-08-21 20:35:58 -04:00
85df32907f
rename nrf boards to feather_nrf52832 and feather_nrf52840_express
2018-08-21 18:45:37 -04:00
df4184e478
rename linker file to SD major version only
2018-08-21 16:02:57 +07:00
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
3525d65af3
should fix #1021
...
- update tinyusb for wanted char
- move usb code into usb.c
2018-07-17 21:24:49 +07:00
f98c7f708e
merge review
2018-07-12 01:37:23 +07:00
10846d316b
Merge branch 'master' into nrf52840_usbboot
2018-07-11 21:35:44 +07:00
a53b1c7cf1
code format
2018-07-10 22:49:51 +07:00
2c63fb2a94
nrf: Remove the random hal and module
...
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
2018-07-10 14:59:22 +02:00
0e819599e7
Merge branch 'master' into nrf52840_usbboot
2018-07-10 02:02:52 +07:00
7715d19efe
update bootloader hex
2018-07-10 01:20:37 +07:00
97a1ae911e
add family option for uf2
2018-07-10 01:18:14 +07:00
25ece8fb3d
nrf: Rewrite the UART HAL using nrfx
2018-07-08 16:42:04 +02:00
c6a2a55bc9
nrf: Cleanup mpconfigboard files
...
All the removed defines were used by legacy modules that are now
removed.
2018-07-08 15:18:11 +02:00
948ddf8463
make SD default to s140 and s132 for nrf52840 and nrf52832
...
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
2018-07-06 14:39:49 +07:00
7fff7f5e70
add usb msc support for nrf52840
2018-07-04 16:40:53 +07:00
46c453cf0a
add tinyusb as submodule
2018-07-03 17:46:08 +07:00
c4f11dfd32
flash target update bootloader setting to skip crc checksum
2018-06-27 15:22:44 +07:00
8fbe1d73e9
clean up makefile
2018-06-27 15:13:20 +07:00
4920cc47ca
move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it
2018-06-27 14:31:08 +07:00
bed7310fd7
update bin files
2018-06-27 14:13:18 +07:00
ecd3993d43
update pin map for feather52840
2018-06-27 14:06:15 +07:00
8d065fe0e6
update reamde
2018-06-26 00:16:58 +07:00
54547683f9
add uf2, bootloader target
2018-06-25 23:31:14 +07:00
4722371be9
update bootloader hex with uf2
2018-06-25 23:27:00 +07:00
f5be5ed6ee
Merge branch 'master' into nrf52840_usbboot
2018-06-25 17:12:24 +07:00
596a1d8843
nrf: Rename feather52 to feather52832 in readme files
2018-06-22 10:04:39 +02:00
25e71a56d4
nrf: Update the PCA10056 example to use new pin naming
2018-06-20 23:39:36 +02:00
c2d4d0a10b
nrf: Simplify pin generation and definition
...
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
2018-06-20 23:26:32 +02:00
ff918556cd
nrf: Simplify the board makefiles
...
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
2018-06-20 21:21:45 +02:00
5509f394dc
nrf: Add a nrfx submodule and prepare for using the new drivers
2018-06-20 20:43:59 +02:00
b47a67d566
nrf: Remove machine, pyb and utime modules
...
Micropython legacy, keeping it consistent with atsam port.
2018-06-20 18:21:18 +02:00
61437106e7
update bootloader for feather nrf52840
2018-06-19 15:27:07 +07:00
6d2702ed98
Merge branch 'master' into nrf52840_usbboot
2018-06-19 14:50:17 +07:00
4e7eee3553
Merge pull request #946 from arturo182/nrf_sd6
...
nrf: Use the production version of s140 6.0.0
2018-06-18 16:29:41 -07:00
feee808955
nrf: Use the production version of s140 6.0.0
2018-06-18 23:12:28 +02:00
05547b72ac
Switch to Feather52s full name to avoid confusion with the nrf52840 later.
...
Fixes #940
2018-06-18 10:51:04 -07:00
35d38dbfed
update nrf52840 bootloader hex
2018-06-13 17:27:55 +07:00
418e28c7dc
update nrf52840 bootloader hex and target
2018-06-08 16:10:49 +07:00
2b3436e87c
add feather nrf52 uart rts, cts support
2018-06-08 15:59:38 +07:00
c10899d13f
allow to flash feather52 and feather52840 with jlink
...
add crc bypass magic to bootloader settting
2018-06-08 15:11:17 +07:00
6d4a2f5524
Merge branch 'master' into usbboot
2018-05-17 15:23:45 +07:00
52ebfd07a5
update nrfutil to 0.5.2d with singlebank option
2018-05-17 15:20:07 +07:00
53593d1315
fix #809
...
define CIRCUITPY_BOOT_OUTPUT_FILE will cause mp_hal_stdout_tx_strn() to
invoke before serial_init() is called. Solution is skipped output to
serial if it is not inited.
2018-05-15 18:40:49 +07:00
05f36ebeb1
update the bootloader hex for feather52840
2018-05-15 16:06:03 +07:00
d0e00d7fbe
Added built to example
2018-04-23 20:01:53 +02:00
0de8697315
Added note on USB CDC bootloader
2018-04-23 19:58:29 +02:00
ce9f05f91b
add missing files
2018-04-24 00:51:44 +07:00
50e7a4caa8
add bootloader hex
2018-04-24 00:19:04 +07:00
926849d7a8
don't use python nrfutil on windows, it doesnt work :/ tested feather52 makefile on windows/mingw
2018-04-13 14:00:20 -04:00
fce0b0858f
Removed leftover build option
2018-02-15 21:46:14 +01:00
10497d1db0
Update for style consistency
2018-02-15 21:44:05 +01:00
6544f4cb5c
Cleanup minor typos
2018-02-15 21:42:24 +01:00
da15053e0a
Fixed pin P0_00
2018-02-15 21:41:21 +01:00
d4356f9416
Added second 'P0_00'
2018-02-15 17:00:58 +01:00
cd7baed14d
Added note nrfutil and flashing
2018-02-15 16:00:34 +01:00
70596b6641
Added note on MSDDisable
2018-02-15 15:51:10 +01:00
f989db25b5
more bootloader feather52840 update
2018-02-15 21:43:27 +07:00
2e0edd5a63
Merge branch 'nrf52840' of github.com:microbuilder/circuitpython into nrf52840
2018-02-15 15:19:47 +07:00
2c9cd38547
update bootloader for feather52840
2018-02-15 15:12:30 +07:00
0981c579f0
Fixed pin names
2018-02-13 18:26:28 +01:00
b65e97bdb3
Update pin names
2018-02-13 18:17:31 +01:00
5160dda473
Merge branch 'master' into nrf52840
2018-02-13 18:13:47 +01:00
7b1cc9985b
Merge branch 'master' of github.com:adafruit/circuitpython
2018-02-13 18:11:20 +01:00
283be4f58e
Added note on installing nrfutil
2018-02-13 11:55:24 +01:00
7b6d1052d9
Improved README
2018-02-13 11:50:51 +01:00
Dan Halbert
Drew Fustini
James Bowman
Lady Ada
Michael Welling
Wojtek Siudzinski
Benny Meisels
Scott Shawcroft
JoeBakalor
Dan Halbert
jepler
Scott Shawcroft
Tavish Naruka
Nick Moore
Jerry Needell
dsiee
Gregory P. Smith
jimblom
arturo182
Josh Klar
Josh Klar
hathach
Pierrick C
Scott Shawcroft
Kevin Townsend
Kevin Townsend