Commit Graph

83 Commits

Author SHA1 Message Date
Tom Collins 6f56412ec3 py/lexer: Process CR earlier to allow newlines checks on chr1.
Resolves an issue where lexer failed to accept CR after line continuation
character.  It also simplifies the code.
2017-05-12 15:14:24 +10:00
Tom Collins 2998647c4e py/lexer: Simplify lexer startup by using dummy bytes and next_char().
Now consistently uses the EOL processing ("\r" and "\r\n" convert to "\n")
and EOF processing (ensure "\n" before EOF) provided by next_char().

In particular the lexer can now correctly handle input that starts with CR.
2017-05-09 14:43:23 +10:00
Damien George 5010d1958f py/lexer: Simplify and reduce code size for operator tokenising.
By removing the 'E' code from the operator token encoding mini-language the
tokenising can be simplified.  The 'E' code was only used for the !=
operator which is now handled as a special case; the optimisations for the
general case more than make up for the addition of this single, special
case.  Furthermore, the . and ... operators can be handled in the same way
as != which reduces the code size a little further.

This simplification also removes a "goto".

Changes in code size for this patch are (measured in bytes):

bare-arm:       -48
minimal x86:    -64
unix x86-64:   -112
unix nanbox:    -64
stmhal:         -48
cc3200:         -48
esp8266:        -76
2017-03-29 10:56:52 +11:00
Damien George f64a3e296e py/lexer: Remove obsolete comment, since lexer can now raise exceptions. 2017-03-23 16:40:24 +11:00
Damien George 1831034be1 py: Allow lexer to raise exceptions during construction.
This patch refactors the error handling in the lexer, to simplify it (ie
reduce code size).

A long time ago, when the lexer/parser/compiler were first written, the
lexer and parser were designed so they didn't use exceptions (ie nlr) to
report errors but rather returned an error code.  Over time that has
gradually changed, the parser in particular has more and more ways of
raising exceptions.  Also, the lexer never really handled all errors without
raising, eg there were some memory errors which could raise an exception
(and in these rare cases one would get a fatal nlr-not-handled fault).

This patch accepts the fact that the lexer can raise exceptions in some
cases and allows it to raise exceptions to handle all its errors, which are
for the most part just out-of-memory errors during construction of the
lexer.  This makes the lexer a bit simpler, and also the persistent code
stuff is simplified.

What this means for users of the lexer is that calls to it must be wrapped
in a nlr handler.  But all uses of the lexer already have such an nlr
handler for the parser (and compiler) so that doesn't put any extra burden
on the callers.
2017-03-14 11:52:05 +11:00
Damien George 5124a94067 py/lexer: Convert mp_uint_t to size_t where appropriate. 2017-02-17 12:44:24 +11:00
Damien George 534b7c368d py: Do adjacent str/bytes literal concatenation in lexer, not compiler.
It's much more efficient in RAM and code size to do implicit literal string
concatenation in the lexer, as opposed to the compiler.

RAM usage is reduced because the concatenation can be done right away in the
tokeniser by just accumulating the string/bytes literals into the lexer's
vstr.  Prior to this patch adjacent strings/bytes would create a parse tree
(one node per string/bytes) and then in the compiler a whole new chunk of
memory was allocated to store the concatenated string, which used more than
double the memory compared to just accumulating in the lexer.

This patch also significantly reduces code size:

bare-arm: -204
minimal:  -204
unix x64: -328
stmhal:   -208
esp8266:  -284
cc3200:   -224
2017-02-17 12:12:40 +11:00
Damien George 773278ec30 py/lexer: Simplify handling of line-continuation error.
Previous to this patch there was an explicit check for errors with line
continuation (where backslash was not immediately followed by a newline).

But this check is not necessary: if there is an error then the remaining
logic of the tokeniser will reject the backslash and correctly produce a
syntax error.
2017-02-17 11:30:14 +11:00
Damien George ae43679792 py/lexer: Use strcmp to make keyword searching more efficient.
Since the table of keywords is sorted, we can use strcmp to do the search
and stop part way through the search if the comparison is less-than.

Because all tokens that are names are subject to this search, this
optimisation will improve the overall speed of the lexer when processing
a script.

The change also decreases code size by a little bit because we now use
strcmp instead of the custom str_strn_equal function.
2017-02-17 11:10:35 +11:00
Damien George a68c754688 py/lexer: Move check for keyword to name-tokenising block.
Keywords only needs to be searched for if the token is a MP_TOKEN_NAME, so
we can move the seach to the part of the code that does the tokenising for
MP_TOKEN_NAME.
2017-02-17 10:59:57 +11:00
Damien George 98b3072da5 py/lexer: Simplify handling of indenting of very first token. 2017-02-17 10:56:06 +11:00
Damien George c264414746 py/lexer: Don't generate string representation for period or ellipsis.
It's not needed.
2017-02-16 20:23:41 +11:00
Damien George 8beba7310f extmod/vfs_fat: Remove MICROPY_READER_FATFS component. 2017-01-30 12:26:07 +11:00
Damien George dcb9ea7215 extmod: Add generic VFS sub-system.
This provides mp_vfs_XXX functions (eg mount, open, listdir) which are
agnostic to the underlying filesystem type, and just require an object with
the relevant filesystem-like methods (eg .mount, .open, .listidr) which can
then be mounted.

These mp_vfs_XXX functions would typically be used by a port to implement
the "uos" module, and mp_vfs_open would be the builtin open function.

This feature is controlled by MICROPY_VFS, disabled by default.
2017-01-27 17:19:06 +11:00
Damien George c305ae3243 py/lexer: Permanently disable the mp_lexer_show_token function.
The lexer is very mature and this debug function is no longer used.  If
it's really needed one can uncomment it and recompile.
2016-12-22 10:49:54 +11:00
Damien George f4aebafe7a py/lexer: Remove unnecessary check for EOF in lexer's next_char func.
This check always fails (ie chr0 is never EOF) because the callers of this
function never call it past the end of the input stream.  And even if they
did it would be harmless because 1) reader.readbyte must continue to
return an EOF char if the stream is exhausted; 2) next_char would just
count the subsequent EOF's as characters worth 1 column.
2016-12-22 10:39:06 +11:00
Damien George b9c4783273 py/lexer: Remove unreachable code in string tokeniser. 2016-12-22 10:37:13 +11:00
Damien George adccafb42a tests/basics/lexer: Add a test for newline-escaping within a string. 2016-12-22 10:32:06 +11:00
Damien George 5bdf1650de py/lexer: Make lexer use an mp_reader as its source. 2016-11-16 18:35:01 +11:00
Damien George 66d955c218 py/lexer: Rewrite mp_lexer_new_from_fd in terms of mp_reader. 2016-11-16 18:13:51 +11:00
Damien George e5ef15a9d7 py/lexer: Provide generic mp_lexer_new_from_file based on mp_reader.
If a port defines MICROPY_READER_POSIX or MICROPY_READER_FATFS then
lexer.c now provides an implementation of mp_lexer_new_from_file using
the mp_reader_new_file function.
2016-11-16 18:13:51 +11:00
Damien George 511c083811 py/lexer: Rewrite mp_lexer_new_from_str_len in terms of mp_reader_mem. 2016-11-16 18:13:50 +11:00
Damien George 31101d91ce py/lexer: Remove unnecessary code, and unreachable code.
Setting emit_dent=0 is unnecessary because arriving in that part of the
if-logic will guarantee that emit_dent is already zero.

The block to check indent_top(lex)>0 is unreachable because a newline is
always inserted an the end of the input stream, and hence dedents are
always processed before EOF.
2016-10-12 11:00:17 +11:00
Damien George 5da0d29d3c py/vstr: Remove vstr.had_error flag and inline basic vstr functions.
The vstr.had_error flag was a relic from the very early days which assumed
that the malloc functions (eg m_new, m_renew) returned NULL if they failed
to allocate.  But that's no longer the case: these functions will raise an
exception if they fail.

Since it was impossible for had_error to be set, this patch introduces no
change in behaviour.

An alternative option would be to change the malloc calls to the _maybe
variants, which return NULL instead of raising, but then a lot of code
will need to explicitly check if the vstr had an error and raise if it
did.

The code-size savings for this patch are, in bytes: bare-arm:188,
minimal:456, unix(NDEBUG,x86-64):368, stmhal:228, esp8266:360.
2016-09-19 12:28:55 +10:00
Damien George 3ff16ff52e py: Declare constant data as properly constant.
Otherwise some compilers (eg without optimisation) will put this read-only
data in RAM instead of ROM.
2016-05-20 12:46:20 +01:00
pohmelie 81ebba7e02 py: add async/await/async for/async with syntax
They are sugar for marking function as generator, "yield from"
and pep492 python "semantically equivalents" respectively.

@dpgeorge was the original author of this patch, but @pohmelie made
changes to implement `async for` and `async with`.
2016-04-13 15:26:38 +01:00
Damien George ea23520403 py: Add MICROPY_DYNAMIC_COMPILER option to config compiler at runtime.
This new compile-time option allows to make the bytecode compiler
configurable at runtime by setting the fields in the mp_dynamic_compiler
structure.  By using this feature, the compiler can generate bytecode
that targets any MicroPython runtime/VM, regardless of the host and
target compile-time settings.

Options so far that fall under this dynamic setting are:
- maximum number of bits that a small int can hold;
- whether caching of lookups is used in the bytecode;
- whether to use unicode strings or not (lexer behaviour differs, and
  therefore generated string constants differ).
2016-02-25 10:05:46 +00:00
Damien George dd5353a405 py: Add MICROPY_ENABLE_COMPILER and MICROPY_PY_BUILTINS_EVAL_EXEC opts.
MICROPY_ENABLE_COMPILER can be used to enable/disable the entire compiler,
which is useful when only loading of pre-compiled bytecode is supported.
It is enabled by default.

MICROPY_PY_BUILTINS_EVAL_EXEC controls support of eval and exec builtin
functions.  By default they are only included if MICROPY_ENABLE_COMPILER
is enabled.

Disabling both options saves about 40k of code size on 32-bit x86.
2015-12-18 12:35:44 +00:00
Damien George 2b000474d9 py/lexer: Properly classify floats that look like hex numbers.
Eg 0e0 almost looks like a hex number but in fact is a float.
2015-09-07 17:33:44 +01:00
Damien George 0be3c70cd8 py/lexer: Raise SyntaxError when unicode char point out of range. 2015-09-07 17:19:17 +01:00
Damien George 081f9325f5 py/lexer: Raise NotImplError for unicode name escape, instead of assert. 2015-09-07 17:08:49 +01:00
Damien George d241c2a592 py/lexer: Raise SyntaxError when str hex escape sequence is malformed.
Addresses issue #1390.
2015-07-23 23:20:37 +01:00
Damien George 7f19a39a3b py: Cast argument for printf to int, to be compatible with more ports.
This allows stmhal to be compiled with MICROPY_DEBUG_PRINTERS.
2015-06-22 17:40:12 +01:00
Damien George 7ed58cb663 py: Support unicode (utf-8 encoded) identifiers in Python source.
Enabled simply by making the identifier lexing code 8-bit clean.
2015-06-09 10:58:07 +00:00
Dave Hylands 3ad94d6072 extmod: Add ubinascii.unhexlify
This also pulls out hex_digit from py/lexer.c and makes unichar_hex_digit
2015-05-20 09:29:22 +01:00
Damien George 2e2e404ff7 py: Allow to compile with extra warnings (sign-compare, unused-param). 2015-03-19 00:25:33 +00:00
Damien George 7d414a1b52 py: Parse big-int/float/imag constants directly in parser.
Previous to this patch, a big-int, float or imag constant was interned
(made into a qstr) and then parsed at runtime to create an object each
time it was needed.  This is wasteful in RAM and not efficient.  Now,
these constants are parsed straight away in the parser and turned into
objects.  This allows constants with large numbers of digits (so
addresses issue #1103) and takes us a step closer to #722.
2015-02-08 01:57:40 +00:00
Damien George 32bade19d9 py: Convert CR to LF and CR LF to LF in lexer.
Only noticeable difference is how newlines are encoded in triple-quoted
strings.  The behaviour now matches CPython3.
2015-01-30 00:27:46 +00:00
Damien George 16677ce311 py: Be more precise about unicode type and disabled unicode behaviour. 2015-01-28 14:07:11 +00:00
Damien George 963a5a3e82 py, unix: Allow to compile with -Wsign-compare.
See issue #699.
2015-01-16 17:47:07 +00:00
Damien George b4b10fd350 py: Put all global state together in state structures.
This patch consolidates all global variables in py/ core into one place,
in a global structure.  Root pointers are all located together to make
GC tracing easier and more efficient.
2015-01-07 20:33:00 +00:00
Damien George 51dfcb4bb7 py: Move to guarded includes, everywhere in py/ core.
Addresses issue #1022.
2015-01-01 20:32:09 +00:00
Damien George 451a087075 py: Fix printing of size_t entity; fix qemu-arm for changes to lexer. 2014-12-05 22:50:16 +00:00
Damien George a4c52c5a3d py: Optimise lexer by exposing lexer type.
mp_lexer_t type is exposed, mp_token_t type is removed, and simple lexer
functions (like checking current token kind) are now inlined.

This saves 784 bytes ROM on 32-bit unix, 348 bytes on stmhal, and 460
bytes on bare-arm.  It also saves a tiny bit of RAM since mp_lexer_t
is a bit smaller.  Also will run a bit more efficiently.
2014-12-05 19:35:18 +00:00
Damien George 9bf5f2857d py: Add further checks for failed malloc in lexer init functions. 2014-10-09 16:53:37 +01:00
Damien George 94fbe9711a py: Change lexer stream API to return bytes not chars.
Lexer is now 8-bit clean inside strings.
2014-07-30 11:46:05 +01:00
Damien George 54eb4e723e lexer: Convert type (u)int to mp_(u)int_t. 2014-07-03 13:47:47 +01:00
Chris Angelico 2ba2299d28 lexer, vstr: Add unicode support. 2014-06-27 00:04:18 +03:00
Paul Sokolovsky 59c675a64c py: Include mpconfig.h before all other includes.
It defines types used by all other headers.

Fixes #691.
2014-06-21 22:43:22 +03:00
Emmanuel Blot f6932d6506 Prefix ARRAY_SIZE with micropython prefix MP_ 2014-06-19 18:54:34 +02:00