felixerdy
ca6dda4d2b
reorder alias
2021-04-09 08:35:13 +02:00
Jeff Epler
3aec1032f7
atmel-samd: switch to shared softencoder implementation
2021-04-08 16:32:36 -05:00
felixerdy
e5cffa94e8
add aliases for TX and RX
2021-04-08 21:19:27 +02:00
Brian Dean
8544249fc0
boards/bdmicro_vina_d51: Replace old rev with new rev and rename.
...
This update to the PR retains the earlier board rev (with a rename) so
that backward binary compatibility is not lost for the earlier board
revision. The primary name 'vina-d51' is retained for the latest
revision to make it easy for customers to select the proper UF2
download - because the name matches the commercial name.
Details:
Replace bdmicro_vina_d51 with bdmicro_vina_d51_pcb7 (revision 7 of
PCB) with boardfiles unmodified. Add _pcb7 to the workflow build.
Replace bdmicro_vina_d51 boardfile content with latest PCB updates
(revision 10 ov PCB). Add minimal comments in the board files to make
it clear which PCB revision is implemented. Update the USB PID to
reflect an updated board revision.
2021-04-07 09:11:30 -04:00
Brian Dean
3e558a89ac
boards/bdmicro_vina_d51: A few updates for flexibility and expansion.
...
ESP-01 header renamed to AUX, and expanded to 12 pins from 8
pins. Pins 1-8 still accommodate the ESP-01, with expansion to full
SERCOM 4-pad support to allow for SPI and I2C on that expansion port
with additional GPIO control.
Update pins.c with additional signals provided AUX_1-8, along with
UART, SPI, I2C name usage as aliases to appropriate AUX_1-8
signals. Additionally, add several alternate names specific to several
expansion modules - the ESP-01, and the ATW-01 using the WINC_1500
(SPI) w/interrupt and control needed for the WINC - with assignments
to module pin positions.
Re-work SERCOM assignments to accommodate the above from other parts
of the board, which required moving a SERCOM or two around in order to
accommodate the 4-pad sercom pin mapping on the AUX port.
Built and tested using latest from 'main':
Adafruit CircuitPython 6.2.0-rc.0-70-ga1562430f-dirty on 2021-04-05;
BDMICRO VINA-D51 with samd51n20
2021-04-05 10:44:52 -04:00
sabas1080
8b6ffba392
Update comment
2021-04-04 11:10:32 -05:00
sabas1080
53f3282e9c
change flash device
2021-04-02 14:42:38 -06:00
sabas1080
f8da94b8ba
removed o¡modules not availables
2021-04-02 14:40:27 -06:00
sabas1080
c1987b7311
init port hunter cat nfc!
2021-04-02 13:19:59 -06:00
Tsutomu IKEGAMI
be50732515
Fix SD_DET pin assignment of seeduino_wio_terminal.
2021-04-01 17:09:56 +09:00
Artyom Skrobov
8056af8648
[synthio] add a simple MidiTrack implementation
2021-03-26 16:38:10 -04:00
Scott Shawcroft
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
felixerdy
cde659651b
add brown out detect level
2021-03-23 19:17:45 +01:00
Limor "Ladyada" Fried
4b42932188
Merge pull request #4449 from ladyada/main
...
adventure together with rotary trinkey
2021-03-20 13:37:31 -04:00
lady ada
8884682cac
adventure together with rotary trinkey
2021-03-20 12:03:51 -04:00
Jeff Epler
bfc8c89536
Merge pull request #4403 from jepler/bitmap-read-2
...
bitmaptools: Add readinto, arrayblit
2021-03-17 07:57:31 -05:00
Jeff Epler
94fa8e8a60
disable bitmaptools on small board
2021-03-16 19:04:21 -05:00
Jeff Epler
75ba26ee7c
Merge pull request #4421 from kattni/led-pin
...
Adding LED for D13/L pin name.
2021-03-16 18:58:14 -05:00
Mark
1be5ca7881
Merge pull request #4130 from gamblor21/rp_dp_parallel
...
Add RP2040 displayio.ParallelBus Support
2021-03-16 13:49:55 -05:00
Jeff Epler
58679dc038
Merge remote-tracking branch 'origin/main' into bitmap-read-2
2021-03-16 12:21:50 -05:00
Kattni Rembor
2b910b7292
Adding LED for D13/L pin name.
2021-03-16 12:14:40 -04:00
gamblor21
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
gamblor21
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
Mark
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
Jeff Epler
d3bf1fe15d
modifications by pre-commit
2021-03-15 18:11:00 -05:00
microDev
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
felixerdy
6c32a1f67f
update pins of senseBox MCU
2021-03-15 10:27:50 +01:00
Jeff Epler
b33d77bfe8
disable bitmaptools on over-full board
2021-03-14 20:08:09 -05:00
felixerdy
de93df6444
add senseBox MCU
2021-03-12 17:57:55 +01:00
gamblor21
7321411962
Added frequency to parallel display
2021-03-11 19:32:43 -06:00
gamblor21
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
Scott Shawcroft
2c3002b327
Merge pull request #4370 from jposada202020/i2cperipheral_ctrlc
...
I2CPeripheral samd51 corrections in the CTRLC bit
2021-03-09 12:58:59 -08:00
jposada202020
be90fa80e8
Initial Changes
2021-03-09 10:48:33 -05:00
Jeff Epler
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
Jeff Epler
4f040af481
vm: Make the speed-size trade-off compile time settable
...
.. and enable for all samd21 boards
2021-03-05 18:29:27 -06:00
Dan Halbert
4cf6579e22
remove general changes; not consistent across builds
2021-03-05 10:10:50 -05:00
Dan Halbert
c97721455a
Shrink the smallest builds with compile options
2021-03-04 23:07:06 -05:00
Jeff Epler
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
Dan Halbert
0a58d451ad
Merge pull request #4306 from Neradoc/fix-reset-to-safe
...
press reset to safe mode on ports where reset reason is not implemented
2021-03-02 15:44:52 -05:00
Scott Shawcroft
e4f0e47d9f
Merge pull request #4233 from pewpew-game/displayio-group-list
...
displayio: make Group use a python list internally
2021-03-02 09:59:58 -08:00
Dan Halbert
248acd07c8
shrink builds
2021-03-02 12:25:42 -05:00
Radomir Dopieralski
cb2cf81136
ugame10 - disable pulseio to make more room for the French
2021-03-02 11:11:55 +01:00
Dan Halbert
54d11a8e2d
Merge pull request #4299 from jamesbowman/main
...
Add EVE support for Feather M4 Express
2021-03-01 22:56:50 -05:00
Scott Shawcroft
d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup
...
Add `bitmaptools` module
2021-03-01 18:24:12 -08:00
James Bowman
0dabd1ace2
Add EVE support for Feather M4 Express
2021-03-01 14:42:48 -08:00
Jeff Epler
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
Scott Shawcroft
7562b0cbb8
Turn off GC opt on catwan_usbstick
2021-02-26 12:00:01 -08:00
Jeff Epler
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
Kevin Matocha
ec4cd68edc
More mpconfigboard.mk corrections for small builds
2021-02-25 17:48:50 -06:00
Kevin Matocha
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
Kamil Tomaszewski
fb32e0a7fd
qtpy_m0_haxpress: Change config to make it fit.
2021-02-25 09:44:33 +01:00
Dan Halbert
a30d4ad25d
set SUPEROPT_VM = 0 on most non-Express SAMD21 boards
2021-02-22 23:03:11 -05:00
Dan Halbert
8470f0fdb7
SAMD21: one endpoint pair for MSC now instead of two
2021-02-21 12:37:59 -05:00
Dan Halbert
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
Dan Halbert
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
Seth Kerr
9e626fdd5c
new cp sapling board
2021-02-14 20:00:32 -05:00
Dan Halbert
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
Jeff Epler
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
Dan Halbert
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
Scott Shawcroft
f6603aa566
Merge pull request #4168 from BHDynamics/main
...
Add DynaLoRa-USB Dongle
2021-02-10 11:03:16 -08:00
Enrique Casado
983c75fb24
Add more pin names
2021-02-10 12:19:50 +01:00
Dan Halbert
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
Dan Halbert
5bb722b927
Merge pull request #4122 from hathach/fix-3986
...
Fix 3986 background reset remove existing usb callback
2021-02-05 09:13:28 -05:00
Enrique Casado
70e15d61b2
ports/atmel-samd/boards/dynalora_usb/board.c
2021-02-05 13:24:59 +01:00
Dan Halbert
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
Dan Halbert
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
BiffoBear
4eb396806c
Updated trinket_m0 make file to squeeze all translations as per Dan Halbert.
2021-02-03 11:47:56 +07:00
BiffoBear
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
Patrick Van Oosterwijck
0dbd3293a9
Add board Silicognition LLC M4-Shim
2021-01-30 18:35:35 -07:00
Dan Halbert
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
Scott Shawcroft
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
Dan Halbert
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
Dan Halbert
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
David Glaude
abd9f7894d
Permit Gameduino 3X Dazzler support on that board.
...
Totally untested, change request based on change made in #2581 .
It might be my first PR in CircuitPython core...
Maybe this should be confirmed by @jamesbowman
Those are the two boards that seems supported:
* Metro M4 Express
* Metro nRF52840 Express
The only Metro that this PR concern:
* Metro M4 AirLift Lite
Other Metro I found and are maybe not supported:
* Metro ESP32-S2
* Metro M0 Express
* Metro M7 1011
2021-01-24 12:53:06 +01:00
Dan Halbert
dc421a6ca8
squeeze some builds
2021-01-23 06:18:15 -05:00
Dan Halbert
8c49c8df0a
shrink arduino_mkr1300
2021-01-22 11:26:33 -05:00
Dan Halbert
e3275be8b1
Merge pull request #3911 from hugodahl/add-translation-for-builtin-object-help
...
Update built-in help output for localization (Issue #3907 )
2021-01-22 03:49:19 -05:00
Dan Halbert
63b5e56c72
shrink feather_m0_adalogger and gemma_m0
2021-01-21 23:49:49 -05:00
Dan Halbert
ea9fe24971
shrink arduino_mkrzero build
2021-01-21 18:02:35 -05:00
Dan Halbert
9b8246f889
shrink sparkfun_samd21_dev de_DE build
2021-01-21 15:56:30 -05:00
mrangen
dea2bcd8f0
Fixed comment in mpconfigboard.h
2021-01-17 21:20:27 -07:00
gamblor21
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
gamblor21
49e059cdaf
Removing frozen libraries
2021-01-16 16:37:42 -06:00
Jeff Epler
c44c99398d
Merge pull request #3983 from dhalbert/6.1.0-shrink-builds
...
shrink some de_DE builds
2021-01-12 20:19:43 -06:00
Jeff Epler
8d24e72981
Merge pull request #3978 from ladyada/neotrinkey
...
samd21 board with only 4 neopixels + two touchpads
2021-01-12 20:19:01 -06:00
Dan Halbert
4b30412871
shrink some de_DE builds
2021-01-12 18:23:37 -05:00
Dan Halbert
4be5e914ac
Merge pull request #3966 from dhalbert/samd-dac-channels
...
fix atmel-samd DAC channel selection logic
2021-01-12 13:01:50 -05:00
lady ada
748d44892d
fix some precommit complaints
2021-01-12 12:55:02 -05:00
lady ada
f7f97ae1b7
samd21 board with only 4 neopixels + two touchpads
2021-01-12 12:50:08 -05:00
Dan Halbert
452d66dd0e
Update ports/atmel-samd/common-hal/analogio/AnalogOut.c
...
whoops, yes!
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-11 19:12:52 -05:00
Scott Shawcroft
10093d37c5
Merge pull request #3960 from dhalbert/pwmout-tcc-resolution
...
Look up TCC resolution as necessary
2021-01-11 15:33:59 -08:00
Scott Shawcroft
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
Dan Halbert
316bd0c72d
fix atmel-samd DAC channel selection logic
2021-01-10 19:22:15 -05:00
Dan Halbert
908e02439d
Look up TCC resolution as necessary
2021-01-09 15:04:23 -05:00
foamyguy
13efbf24e5
disable msgpack on boards without room
2021-01-09 10:33:56 -06:00
Dan Halbert
39c166ba6a
update tinyusb; _ticks_enabled only for SAMD21
2021-01-08 13:30:11 -05:00
Dan Halbert
9a1d864331
overflowed tick counter needs 64 bits everywhere
2021-01-06 11:09:06 -05:00
iot49
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
Kattni Rembor
bbd4de33d1
Add adafruit_bus_device to CPX builds.
2021-01-04 15:53:39 -05:00
Benjamin Shockley
9286f26831
Added CP Dotstart Lib to Build
...
Added the CircuitPython dotstar library to the Mini SAM M4 build so users do not have to include the library to utilize the built-in APA102 LED.
2021-01-03 10:42:58 -06:00
