Commit Graph

59 Commits

Author SHA1 Message Date
Dan Halbert 616201109c correct MP_TYPE_FLAG_NONE to MP_TYPE_FLAG_HAS_SPECIAL_ACCESSORS
also remove #include py/objproperty.h where not needed
(side effect of looking for property uses)
2023-11-04 22:51:41 -04:00
Jeff Epler 774f6ac6ab
Switch to using MP_ERROR_TEXT instead of translate, globally 2023-10-30 09:49:06 +01:00
Scott Shawcroft e62db5adcd
Fix native property setting from subclass 2023-10-24 16:20:51 -07:00
Scott Shawcroft 9633c4e78f
Merge remote-tracking branch 'adafruit/main' into v1.20-merge 2023-10-11 11:21:57 -07:00
Dan Halbert 7e0e6fcdca Metro M4 now compiles 2023-10-03 15:03:59 -04:00
Dan Halbert 4d175ab41a convert to MP_DEFINED_CONST_OBJ_TYPE() 2023-09-19 21:09:29 -04:00
Dan Halbert 2c0fa0f7dc initial merge from v1.20.0; just satisifying conflicts 2023-09-19 11:10:12 -04:00
Jeff Epler c029d6a165
Merge remote-tracking branch 'origin/8.2.x' into merge-82x 2023-08-22 08:49:16 -05:00
Dan Halbert 10a022db87 consolidate and shorten some error messages 2023-08-19 12:39:54 -04:00
Dan Halbert 0d2c3c3f08 wip: continuing compilation fixes; mp_obj_alloc everywhere 2023-08-07 20:45:57 -04:00
MicroDev d9d94eacca
run updated pre-commit 2023-02-01 13:38:41 +05:30
foamyguy 56be547754 fix type name 2022-11-11 20:18:42 -06:00
foamyguy 3c4d8c6926 implement self hidden property for vectorio shapes 2022-11-11 17:50:07 -06:00
Jeff Epler 907c5d387f
Tweak black_bindings
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.

Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation

This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)

It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.

I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Jeff Epler b2cc8d2aad
run black_bindings across all bindings 2022-09-27 15:21:42 -05:00
Jeff Epler 8227903b61
Use validation functions 2022-09-22 08:39:34 -05:00
Scott Shawcroft 9d10a3da66
Conditionalize LTO 2022-05-27 12:59:54 -07:00
foamyguy b6a5f421a9 use draw protocol impl 2022-05-08 12:02:59 -05:00
Jeff Epler 78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
Jeff Epler 31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
foamyguy 366b9fa0f3 add color_index property to docstring 2022-03-20 09:51:42 -05:00
foamyguy fe8b9728e7 color index for vectorio shapes. 2022-03-19 11:30:37 -05:00
foamyguy 90fadc58fd implement color_number argument for vectorio.Rectangle 2022-03-18 18:28:29 -05:00
Kenny 8de5f90086 vectorio contains(x, y)
new utility function for all vectorio shape specializations for testing
whether a screen-space x,y point falls within a shape's x,y.

This respects the current orientation of the screen in the manner of
displayio and vectorio - so your x,y requests are in the same coordinate
domain as your x,y locations and your width/height etc. properties that
ou set on other shapes. I.e., if you're using this for touch points then
you will need to make sure the touch events are in the same x,y domain as
your display.

```
contains(2, 4) -> true
------------------
|                |
|                |
| --             |
| | \            |
| |. \           |
| |   \          |
| |____\         |
|                |
------------------

contains(5, 4) -> false
------------------
|                |
|                |
| --             |
| | \            |
| |  \.          |
| |   \          |
| |____\         |
|                |
------------------
```

This helps provide low overhead introspection of shape coverage on screen.
It's envisioned that this will be used for things like touch-and-drag
widget controls, touch "areas" and may help with random ornament placement
on toy Christmas trees.
2021-12-27 12:01:19 -10:00
Kenny 17b53c7ebe vectorio: Add width and height properties to rectangle
Closes: https://github.com/adafruit/circuitpython/issues/5695
2021-12-12 19:50:00 -08:00
Dan Halbert 23d2c96476
Merge pull request #5466 from jepler/merge-1.17
Merge 1.17
2021-10-15 23:34:31 -04:00
Jeff Epler 4e7c1a4bd4 Rename make_new's parameter to `all_args`
.. and fix two straggling modules that weren't updated at all.
Maybe they're not included in any builds?
2021-10-15 13:49:33 -05:00
Jeff Epler 8d8f83bc05 Merge tag 'v1.17' into merge-1.17
F-strings, new machine.I2S class, ESP32-C3 support and LEGO_HUB_NO6 board

This release of MicroPython adds support for f-strings (PEP-498), with a
few limitations compared to normal Python.  F-strings are essentially
syntactic sugar for "".format() and make formatting strings a lot more
convenient.  Other improvements to the core runtime include pretty printing
OSError when it has two arguments (an errno code and a string), scheduling
of KeyboardInterrupt on the main thread, and support for a single argument
to the optimised form of StopIteration.

In the machine module a new I2S class has been added, with support for
esp32 and stm32 ports.  This provides a consistent API for transmit and
receive of audio data in blocking, non-blocking and asyncio-based
operation.  Also, the json module has support for the "separators" argument
in the dump and dumps functions, and framebuf now includes a way to blit
between frame buffers of different formats using a palette.  A new,
portable machine.bitstream function is also added which can output a stream
of bits with configurable timing, and is used as the basis for driving
WS2812 LEDs in a common way across ports.

There has been some restructuring of the repository directory layout, with
all third-party code now in the lib/ directory.  And a new top-level
directory shared/ has been added with first-party code that was previously
in lib/ moved there.

The docs have seen further improvement with enhancements and additions to
the rp2 parts, as well as a new quick reference for the zephyr port.
The terms master/slave have been replaced with controller/peripheral,
mainly relating to I2C and SPI usage.  And u-module references have been
replaced with just the module name without the u-prefix to help clear up
the intended usage of modules in MicroPython.

For the esp8266 and esp32 ports, hidden networks are now included in WLAN
scan results.  On the esp32 the RMT class is enhanced with idle_level and
write_pulses modes.  There is initial support for ESP32-C3 chips with
GENERIC_C3 and GENERIC_C3_USB boards.

The javascript port has had its Makefile and garbage collector
implementation reworked so it compiles and runs with latest the Emscripten
using asyncify.

The mimxrt port sees the addition of hardware I2C and SPI support, as well
as some additional methods to the machine module.  There is also support
for Hyperflash chips.

The nrf port now has full VFS storage support, enables source-line on
traceback, and has .mpy features consistent with other ports.

For the rp2 port there is now more configurability for boards, and more
boards added.

The stm32 port has a new LEGO_HUB_NO6 board definition with detailed
information how to get this LEGO Hub running stock MicroPython.  There is
also now support to change the CPU frequency on STM32WB MCUs.  And USBD_xxx
descriptor options have been renamed to MICROPY_HW_USB_xxx.

Thanks to everyone who contributed to this release: Amir Gonnen, Andrew
Scheller, Bryan Tong Minh, Chris Wilson, Damien George, Daniel Mizyrycki,
David Lechner, David P, Fernando, finefoot, Frank Pilhofer, Glenn Ruben
Bakke, iabdalkader, Jeff Epler, Jim Mussared, Jonathan Hogg, Josh Klar,
Josh Lloyd, Julia Hathaway, Krzysztof Adamski, Matúš Olekšák, Michael
Weiss, Michel Bouwmans, Mike Causer, Mike Teachman, Ned Konz, NitiKaur,
oclyke, Patrick Van Oosterwijck, Peter Hinch, Peter Züger, Philipp
Ebensberger, robert-hh, Roberto Colistete Jr, Sashkoiv, Seon Rozenblum,
Tobias Thyrrestrup, Tom McDermott, Will Sowerbutts, Yonatan Goldschmidt.

What follows is a detailed list of changes, generated from the git commit
history, and organised into sections.

Main components
===============

all:
- fix signed shifts and NULL access errors from -fsanitize=undefined
- update to point to files in new shared/ directory

py core:
- mpstate: make exceptions thread-local
- mpstate: schedule KeyboardInterrupt on main thread
- mperrno: add MP_ECANCELED error code
- makeqstrdefs.py: don't include .h files explicitly in preprocessing
- mark unused arguments from bytecode decoding macros
- objexcept: pretty print OSError also when it has 2 arguments
- makeversionhdr: add --tags arg to git describe
- vm: simplify handling of MP_OBJ_STOP_ITERATION in yield-from opcode
- objexcept: make mp_obj_exception_get_value support subclassed excs
- support single argument to optimised MP_OBJ_STOP_ITERATION
- introduce and use mp_raise_type_arg helper
- modsys: optimise sys.exit for code size by using exception helpers
- objexcept: make mp_obj_new_exception_arg1 inline
- obj: fix formatting of comment for mp_obj_is_integer
- emitnative: reuse need_reg_all func in need_stack_settled
- emitnative: ensure stack settling is safe mid-branch
- runtime: fix bool unary op for subclasses of native types
- builtinimport: fix condition for including do_execute_raw_code()
- mkrules: automatically build mpy-cross if it doesn't exist
- implement partial PEP-498 (f-string) support
- lexer: clear fstring_args vstr on lexer free
- mkrules.mk: do submodule sync in "make submodules"

extmod:
- btstack: add missing call to mp_bluetooth_hci_uart_deinit
- btstack: check that BLE is active before performing operations
- uasyncio: get addr and bind server socket before creating task
- axtls-include: add axtls_os_port.h to customise axTLS
- update for move of crypto-algorithms, re1.5, uzlib to lib
- moduselect: conditionally compile select()
- nimble: fix leak in l2cap_send if send-while-stalled
- btstack/btstack.mk: use -Wno-implicit-fallthrough, not =0
- utime: always invoke mp_hal_delay_ms when >= to 0ms
- modbluetooth: clamp MTU values to 32->UINT16_MAX
- nimble: allow modbluetooth binding to hook "sent HCI packet"
- nimble: add "memory stalling" mechanism for l2cap_send
- uasyncio: in open_connection use address info in socket creation
- modujson: add support for dump/dumps separators keyword-argument
- modlwip: fix close and clean up of UDP and raw sockets
- modbluetooth: add send_update arg to gatts_write
- add machine.bitstream
- modframebuf: enable blit between different formats via a palette

lib:
- tinyusb: update to version 0.10.1
- pico-sdk: update to version 1.2.0
- utils/stdout_helpers: make mp_hal_stdout_tx_strn_cooked efficient
- axtls: switch to repo at micropython/axtls
- axtls: update to latest axtls 2.1.5 wih additional commits
- re1.5: move re1.5 code from extmod to lib
- uzlib: move uzlib code from extmod to lib
- crypto-algorithms: move crypto-algorithms code from extmod to lib
- update README's based on contents of these dirs

drivers:
- neopixel: add common machine.bitstream-based neopixel module
- neopixel: optimize fill() for speed
- neopixel: reduce code size of driver
- cyw43: fix cyw43_deinit so it can be called many times in a row
- cyw43: make wifi join fail if interface is not active

mpy-cross:
- disable stack check when building with Emscripten

Support components
==================

docs:
- library: document new esp32.RMT features and fix wait_done
- library: warn that ustruct doesn't handle spaces in format strings
- esp8266/tutorial: change flash mode from dio to dout
- replace master/slave with controller/peripheral in I2C and SPI
- rp2: enhance quickref and change image to Pico pinout
- rp2: update general section to give a brief technical overview
- library/utime.rst: clarify behaviour and precision of sleep ms/us
- library/uasyncio.rst: document stream readexactly() method
- library/machine.I2S.rst: fix use of sd pin in examples
- zephyr: add quick reference for the Zephyr port
- library/zephyr: add libraries specific to the Zephyr port
- templates: add unix and zephyr quickref links to top-index
- rename ufoo.rst to foo.rst
- replace ufoo with foo in all docs
- library/index.rst: clarify module naming and purpose
- library/builtins.rst: add module title
- library/network.rst: simplify socket import
- add docs for machine.bitstream and neopixel module
- library: fix usage of :term: for frozen module reference
- esp8266: use monospace for software tools
- reference: mention that slicing a memoryview causes allocation

examples: no changes specific to this component/port

tests:
- extmod: make uasyncio_heaplock test more deterministic
- cpydiff/modules_struct_whitespace_in_format: run black
- extmod/ujson: add tests for dump/dumps separators argument
- run-multitests.py: add broadcast and wait facility
- multi_bluetooth/ble_subscribe.py: add test for subscription
- extmod/vfs_fat_finaliser.py: ensure alloc at never-used GC blocks
- basics: split f-string debug printing to separate file with .exp
- pybnative: make while.py test run on boards without pyb.delay

tools:
- autobuild: add scripts to build release firmware
- remove obsolete build-stm-latest.sh script
- ci.sh: run apt-get update in ci_powerpc_setup
- makemanifest.py: allow passing flags to mpy-tool.py
- autobuild: add mimxrt port to build scripts for nightly builds
- pyboard.py: add cmd-line option to make soft reset configurable
- mpremote: swap order of PID and VID in connect-list output
- ci.sh: build unix dev variant as part of macOS CI
- ci.sh: build GENERIC_C3 board as part of esp32 CI
- autobuild: use separate IDF version to build newer esp32 SoCs
- autobuild: add FeatherS2 and TinyS2 to esp32 auto builds
- mpremote: add seek whence for mounted files
- mpremote: raise OSError on unsupported RemoteFile.seek
- autobuild: add the MIMXRT1050_EVKB board to the daily builds
- ci.sh: add mpy-cross build to nrf port
- codeformat.py: include ports/nrf/modules/nrf in code formatting
- gen-cpydiff.py: don't rename foo to ufoo in diff output
- autobuild: add auto build for Silicognition wESP32
- mpremote: fix connect-list in case VID/PID are None
- mpremote: add "devs" shortcut for "connect list"
- mpremote: remove support for pyb.USB_VCP in/out specialisation
- autobuild: don't use "-B" for make, it's already a fresh build
- pyboard.py: move --no-exclusive/--soft-reset out of mutex group
- pyboard.py: make --no-follow use same variable as --follow
- pyboard.py: add --exclusive to match --no-exclusive
- pyboard.py: make --no-soft-reset consistent with other args
- uncrustify: force 1 newline at end of file
- mpremote: bump version to 0.0.6

CI:
- workflows: add workflow to build and test javascript port
- workflows: switch from Coveralls to Codecov
- workflows: switch from lcov to gcov
- workflows: add workflow to build and test unix dev variant

The ports
=========

all ports:
- use common mp_hal_stdout_tx_strn_cooked instead of custom one
- update for move of crypto-algorithms, uzlib to lib
- rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID

bare-arm port: no changes specific to this component/port

cc3200 port: no changes specific to this component/port

esp8266 port:
- add __len__ to NeoPixel driver to support iterating
- Makefile: add more libm files to build
- include hidden networks in WLAN.scan results
- replace esp.neopixel with machine.bitstream
- remove dead code for end_ticks in machine_bitstream

esp32 port:
- boards/sdkconfig.base: disable MEMPROT_FEATURE to alloc from IRAM
- add __len__ to NeoPixel driver to support iterating
- main: allow MICROPY_DIR to be overridden
- esp32_rmt: fix RMT looping in newer IDF versions
- esp32_rmt: enhance RMT with idle_level and write_pulses modes
- add new machine.I2S class for I2S protocol support
- machine_spi: calculate actual attained baudrate
- machine_hw_spi: use a 2 item SPI queue for long transfers
- machine_dac: add MICROPY_PY_MACHINE_DAC option, enable by default
- machine_i2s: add MICROPY_PY_MACHINE_I2S option, enable by default
- fix use of mp_int_t, size_t and uintptr_t
- add initial support for ESP32C3 SoCs
- boards/GENERIC_C3: add generic C3-based board
- modmachine: release the GIL in machine.idle()
- mphalport: always yield at least once in delay_ms
- machine_uart: add flow kw-arg to enable hardware flow control
- boards: add Silicognition wESP32 board configuration
- mpconfigport.h: enable reverse and inplace special methods
- include hidden networks in WLAN.scan results
- makeimg.py: get bootloader and partition offset from sdkconfig
- enable MICROPY_PY_FSTRINGS by default
- machine_hw_spi: release GIL during transfers
- machine_pin: make check for non-output pins respect chip variant
- replace esp.neopixel with machine.bitstream
- remove dead code for end_ticks in machine_bitstream
- boards: add GENERIC_C3_USB board with USB serial/JTAG support

javascript port:
- rework Makefile and GC so it works with latest Emscripten
- Makefile: suppress compiler errors from array bounds
- Makefile: change variable to EXPORTED_RUNTIME_METHODS

mimxrt port:
- move calc_weekday helper function to timeutils
- machine_spi: add the SPI class to the machine module
- moduos: seed the PRNG on boot using the TRNG
- boards: set vfs partition start to 1 MBbyte
- main: skip running main.py if boot.py failed
- main: extend the information returned by help()
- mimxrt_flash: remove commented-out code
- modmachine: add a few minor methods to the machine module
- machine_led: use mp_raise_msg_varg helper
- machine_i2c: add hardware-based machine.I2C to machine module
- add support for Hyperflash chips
- boards: add support for the MIMXRT1050_EVKB board
- machine_pin: implement ioctl for Pin

minimal port:
- Makefile: add support for building with user C modules

nrf port:
- modules: replace master/slave with controller/peripheral in SPI
- boards/common.ld: calculate unused flash region
- modules/nrf: add new nrf module with flash block device
- drivers: add support for using flash block device with SoftDevice
- mpconfigport.h: expose nrf module when MICROPY_PY_NRF is set
- README: update README.md to reflect internal file systems
- mpconfigport.h: tune FAT FS configuration
- Makefile: add _fs_size linker script override from make
- modules/uos: allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2
- mpconfigport.h: enable MICROPY_PY_IO_FILEIO when an FS is enabled
- qstrdefsport.h: add entries for in-built FS mount points
- main: add auto mount and auto format hook for internal flash FS
- boards: enable needed features for FAT/LFS1/LFS2
- facilitate use of freeze manifest
- boards: set FROZEN_MANIFEST blank when SD present on nrf51 targets
- modules/scripts: add file system formatting script
- Makefile: set default manifest file for all targets
- mphalport: add dummy function for mp_hal_time_ns()
- boards: enable MICROPY_VFS_LFS2 for all target boards
- modules/uos: add ilistdir to uos module
- modules/nrf: add function to enable/disable DCDC
- enable source line on tracebacks
- set .mpy features consistent with documentation and other ports

pic16bit port: no changes specific to this component/port

powerpc port: no changes specific to this component/port

qemu-arm port: no changes specific to this component/port

rp2 port:
- use 0=Monday datetime convention in RTC
- machine_rtc: in RTC.datetime, compute weekday automatically
- CMakeLists.txt: suppress compiler errors for pico-sdk and tinyusb
- tusb_config.h: set CFG_TUD_CDC_EP_BUFSIZE to 256
- machine_uart: add hardware flow control support
- machine_uart: allow overriding default machine UART pins
- machine_i2c: allow boards to configure I2C pins using new macros
- machine_spi: allow boards to configure SPI pins using new macros
- machine_uart: fix poll ioctl to also check hardware FIFO
- machine_uart: fix read when FIFO has chars but ringbuf doesn't
- tusb_port: allow boards to configure USB VID and PID
- boards/ADAFRUIT_FEATHER_RP2040: configure custom VID/PID
- boards/ADAFRUIT_FEATHER_RP2040: configure I2C/SPI default pins
- boards/SPARKFUN_PROMICRO: configure UART/I2C/SPI default pins
- boards/SPARKFUN_THINGPLUS: configure I2C/SPI default pins
- boards: add Adafruit ItsyBitsy RP2040
- boards: add Adafruit QT Py RP2040
- boards: add Pimoroni Pico LiPo 4MB
- boards: add Pimoroni Pico LiPo 16MB
- boards: add Pimoroni Tiny 2040
- CMakeLists.txt: allow a board's cmake to set the manifest path
- enable MICROPY_PY_FSTRINGS by default
- Makefile: add "submodules" target, to match other ports
- rp2_flash: disable IRQs while calling flash_erase/program
- CMakeLists.txt: add option to enable double tap reset to bootrom
- mpconfigport.h: allow boards to add root pointers

samd port:
- add support for building with user C modules

stm32 port:
- softtimer: add soft_timer_reinsert() helper function
- mpbthciport: change from systick to soft-timer for BT scheduling
- provide a custom BTstack runloop that integrates with soft timer
- usb: make irq's default trigger enable all events
- boardctrl: skip running main.py if boot.py had an error
- sdio: fix undefined reference to DMA stream on H7
- dma: add DMAMUX configuration for H7 to fix dma_nohal_init
- main: call mp_deinit() at end of main
- adc: allow using ADC12 and ADC3 for H7
- adc: define the ADC instance used for internal channels
- adc: simplify and generalise how pin_adcX table is defined
- add new machine.I2S class for I2S protocol support
- boards/NUCLEO_F446RE: fix I2C1 pin assignment to match datasheet
- replace master/slave with controller/peripheral in I2C and SPI
- systick: always POLL_HOOK when delaying for milliseconds
- sdram: make SDRAM test cache aware, and optional failure with msg
- boards/NUCLEO_F446RE: enable CAN bus support
- boards: add support for SparkFun STM32 MicroMod Processor board
- uart: fix LPUART1 baudrate set/get
- uart: support low baudrates on LPUART1
- boards/STM32F429DISC: set correct UART2 pins and add UART3/6
- boards/NUCLEO_F439ZI: add board definition for NUCLEO_F439ZI
- boards/LEGO_HUB_NO6: add board definition for LEGO_HUB_NO6
- Makefile: update to only pull in used Bluetooth library
- README.md: update supported MCUs, and submodule and mboot use
- usbd_desc: rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx
- usbd_cdc_interface: rename USBD_CDC_xx opts to MICROPY_HW_USB_xx
- powerctrl: support changing frequency on WB MCUs
- boards/NUCLEO_H743ZI2: add modified version of NUCLEO_H743ZI
- mbedtls: fix compile warning about uninitialized val
- enable MICROPY_PY_FSTRINGS by default
- add implementation of machine.bitstream
- Makefile: allow GIT_SUBMODULES and LIBS to be extended
- stm32_it: support TIM17 IRQs on WB MCUs
- disable computed goto on constrained boards
- storage: make extended-block-device more configurable
- boards/LEGO_HUB_NO6: change SPI flash storage to use hardware SPI
- boards/LEGO_HUB_NO6: skip first 1MiB of SPI flash for storage
- boards/LEGO_HUB_NO6: add make commands to backup/restore firmware

teensy port: no changes specific to this component/port

unix port:
- modffi: add option to lock GC in callback, and cfun access
- Makefile: add back LIB_SRC_C to list of object files
- variants: enable help and help("modules") on standard and dev
- Makefile: disable error compression on arm-linux-gnueabi-gcc

windows port:
- Makefile: add .exe extension to executables name
- appveyor: update to VS 2017 and use Python 3.8 for build/test

zephyr port:
- machine_spi: add support for hardware SPI
2021-10-15 08:20:54 -05:00
microDev 1977011cfd
use `mp_arg_validate_type` for keyword args 2021-10-10 15:28:35 +05:30
James Carr 5f519b8ba9
Update shared-bindings/vectorio/Polygon.c
As per microDev1

Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com>
2021-09-13 17:04:46 +01:00
James Carr f35d1578cc
Update the docs for vectorio 2021-09-11 23:37:41 +01:00
James Carr 2bc260a102
Rework of changes to bounds checking of location in VectorShape, moving most of the code into shared-module. 2021-09-10 21:48:01 +01:00
James Carr 1f446916c3
Improve the bounds checking on the location (the x, y co-ordinates) of a
VectorShape object so that it is consistent no matter where it is set from:
 * the constructor
 * the x and y setters
 * the location setter
2021-09-10 09:39:12 +01:00
Rob Capellini 1c8828223f Convert more modules to use MP_REGISTER_MODULE
Convert neopixel_write, onewireio, ps2io, pulseio, pwmio, rainbowio, random, rgbmatrix, rotaryio, rtc, sdcardio, sharpdisplay, _stage, storage, struct, supervisor, synthio, touchio, traceback, usb_cdc, usb_hid, usb_midi, and vectorio modules to use MP_REGISTER_MODULE.

Related to #5183.
2021-08-30 22:29:51 -04:00
Kenny a1fff320fb add location property to vectorshape and all composed shapes 2021-08-08 00:14:53 -07:00
Kenny 6be952d3ba found more documentation dependencies that needed updating 2021-08-05 00:13:10 -07:00
Kenny 85bf3d074f stub checker does not approve of shared vectorshape properties 2021-08-04 23:55:03 -07:00
Kenny 48ea81e2f1
Vexing pedantry
Spaces deleted from phone
Eternal chore, lint
2021-08-03 11:25:31 -07:00
Kenny 739ef92fc9
Update __init__.h
More random spaces. Why isn’t this in a pre-commit check
2021-08-03 09:20:02 -07:00
Kenny 464281b881
Stub comma 2021-08-03 08:08:11 -07:00
Kenny 8607cdd783 vectorio: add draw protocol
* Removes VectorShape from user python interactions
* Re-integrates vectorio with displayio behind draw protocol implementations
* Implements draw protocol with VectorShape
* Composes VectorShape behaviors into Rectangle, Circle and Polygon
* Fixes terrible pixel garbage being left behind
* Improves redraw performance (heuristically) by tracking dirty area separately from current area.

Known Issues:
It does not work with transposed views.
2021-08-02 20:19:54 -07:00
Kenny 0afd863224 vectorio: palettes don't color dirty rectangles
This is a breaking change with previous palette semantic with respect to python code that uses vectorio.
Displayio has breaking changes in cpy 7 for Group's removal of max_size parameter so this is as good a
time as any to break everything.

Currently:
To color vectorio shapes correctly you have to pass in a palette with length 2. Palette[0] must be set transparent and palette[1] must be the color you want.

New:
To color vectorio shapes correctly you pass in a palette with length >= 1. Palette[0] will be the color of the shape.

Also improves pixels per second when skipping areas that aren't covered by the shape.
2021-07-31 16:32:01 -07:00
Scott Shawcroft 3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod 2021-05-05 17:51:52 -07:00
Scott Shawcroft 76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Taku Fukada 56c898da80 Modify some Python stubs 2020-08-07 01:01:28 +09:00
Taku Fukada d356581651 Fix several type hints 2020-07-27 18:05:13 +09:00
Taku Fukada 54a342a7f5 Add and correct some type hints 2020-07-24 18:20:03 +09:00
dherrada 9e3fa863f1
Merge branch 'main' into type_hints 2020-07-21 16:18:51 -04:00
Kenny efeae0d84f fix 3169: Polygon.points property
The getter for vectorio.Polygon#points was not updated with the data type change of the stored points list.

This moves the implementation to shared_module and updates the data type to reflect the actual state.
2020-07-19 12:27:35 -07:00