Merge remote-tracking branch 'adafruit/main' into banglejs2

.github/actions/deps/external/action.yml

@@ -45,7 +45,7 @@ runs:
 
     # arm
     - name: Get arm toolchain
-      if: inputs.platform == 'aarch' || inputs.platform == 'arm' || inputs.platform == 'nrf'
+      if: inputs.platform == 'aarch' || inputs.platform == 'arm'
       uses: carlosperate/arm-none-eabi-gcc-action@v1
       with:
         release: '10-2020-q4'
@@ -73,22 +73,6 @@ runs:
         echo >> $GITHUB_PATH "$PATH"
       shell: bash
 
-    # nrf
-    - name: Get nrfutil 7+
-      if: inputs.platform == 'nrf'
-      run: |
-        wget https://developer.nordicsemi.com/.pc-tools/nrfutil/x64-linux/nrfutil
-        chmod +x nrfutil
-        ./nrfutil install nrf5sdk-tools
-        mkdir -p $HOME/.local/bin
-        mv nrfutil $HOME/.local/bin
-        echo "$HOME/.local/bin" >> $GITHUB_PATH
-      shell: bash
-    - name: Print nrfutil version
-      if: inputs.platform == 'nrf'
-      run: nrfutil -V
-      shell: bash
-
     # riscv
     - name: Get riscv toolchain
       if: inputs.platform == 'riscv'

.github/actions/deps/ports/action.yml

@@ -0,0 +1,28 @@
+name: Fetch port deps
+
+inputs:
+  board:
+    required: true
+    type: string
+
+outputs:
+  port:
+    value: ${{ steps.board-to-port.outputs.port }}
+
+runs:
+  using: composite
+  steps:
+    - name: Board to port
+      id: board-to-port
+      run: |
+        PORT=$(find ports/*/boards/ -type d -name ${{ inputs.board }} | sed 's/^ports\///g;s/\/boards.*//g')
+        if [ -z $PORT ]; then (exit 1); else echo >> $GITHUB_OUTPUT "port=$PORT"; fi
+      shell: bash
+
+    - name: Set up espressif port
+      if: steps.board-to-port.outputs.port == 'espressif'
+      uses: ./.github/actions/deps/ports/espressif
+
+    - name: Set up nrf port
+      if: steps.board-to-port.outputs.port == 'nrf'
+      uses: ./.github/actions/deps/ports/nrf

.github/actions/deps/ports/nrf/action.yml

@@ -0,0 +1,17 @@
+name: Fetch nrf port deps
+
+runs:
+  using: composite
+  steps:
+    - name: Get nrfutil 7+
+      run: |
+        wget https://developer.nordicsemi.com/.pc-tools/nrfutil/x64-linux/nrfutil
+        chmod +x nrfutil
+        ./nrfutil install nrf5sdk-tools
+        mkdir -p $HOME/.local/bin
+        mv nrfutil $HOME/.local/bin
+        echo "$HOME/.local/bin" >> $GITHUB_PATH
+      shell: bash
+    - name: Print nrfutil version
+      run: nrfutil -V
+      shell: bash

.github/workflows/build-boards-custom.yml

@@ -51,20 +51,15 @@ jobs:
       if: inputs.debug || inputs.flags != ''
       run: |
         > custom-build && git add custom-build
-    - name: Get port
-      id: get-port
-      run: |
-        PORT=$(find ports/*/boards/ -type d -name ${{ inputs.board }} | sed 's/^ports\///g;s/\/boards.*//g')
-        if [ -z $PORT ]; then (exit 1); else echo >> $GITHUB_OUTPUT "port=$PORT"; fi
-    - name: Port to platform
-      run: echo >> $GITHUB_ENV "PLATFORM=${{ env[format('PLATFORM_{0}', steps.get-port.outputs.port)] }}"
     - name: Set up python
       uses: actions/setup-python@v4
       with:
         python-version: 3.x
     - name: Set up port
-      if: env.PLATFORM == 'esp'
+      id: set-up-port
-      uses: ./.github/actions/deps/ports/espressif
+      uses: ./.github/actions/deps/ports
+      with:
+        board: ${{ inputs.board }}
     - name: Set up submodules
       id: set-up-submodules
       uses: ./.github/actions/deps/submodules
@@ -75,7 +70,7 @@ jobs:
       uses: ./.github/actions/deps/external
       with:
         action: cache
-        platform: ${{ env.PLATFORM }}
+        platform: ${{ env[format('PLATFORM_{0}', steps.set-up-port.outputs.port)] }}
     - name: Set up mpy-cross
       if: steps.set-up-submodules.outputs.frozen == 'True'
       uses: ./.github/actions/mpy_cross
@@ -96,9 +91,9 @@ jobs:
         mkfs.fat --version || true
     - name: Build board
       run: make -j2 ${{ inputs.flags }} BOARD=${{ inputs.board }} DEBUG=${{ inputs.debug && '1' || '0' }} TRANSLATION=${{ inputs.language }}
-      working-directory: ports/${{ steps.get-port.outputs.port }}
+      working-directory: ports/${{ steps.set-up-port.outputs.port }}
     - name: Upload artifact
       uses: actions/upload-artifact@v3
       with:
         name: ${{ inputs.board }}-${{ inputs.language }}-${{ inputs.version }}${{ inputs.flags != '' && '-custom' || '' }}${{ inputs.debug && '-debug' || '' }}
-        path: ports/${{ steps.get-port.outputs.port }}/build-${{ inputs.board }}/firmware.*
+        path: ports/${{ steps.set-up-port.outputs.port }}/build-${{ inputs.board }}/firmware.*

.github/workflows/build-boards.yml

@@ -38,8 +38,9 @@ jobs:
       with:
         python-version: 3.x
     - name: Set up port
-      if: inputs.platform == 'esp'
+      uses: ./.github/actions/deps/ports
-      uses: ./.github/actions/deps/ports/espressif
+      with:
+        board: ${{ matrix.board }}
     - name: Set up submodules
       id: set-up-submodules
       uses: ./.github/actions/deps/submodules

.github/workflows/build.yml

@@ -22,12 +22,12 @@ jobs:
     outputs:
       build-doc: ${{ steps.set-matrix.outputs.build-doc }}
       build-boards: ${{ steps.set-matrix.outputs.build-boards }}
+      build-windows: ${{ steps.set-matrix.outputs.build-windows }}
       boards-aarch: ${{ steps.set-matrix.outputs.boards-aarch }}
       boards-arm: ${{ steps.set-matrix.outputs.boards-arm }}
+      boards-atmel: ${{ steps.set-matrix.outputs.boards-atmel }}
       boards-esp: ${{ steps.set-matrix.outputs.boards-esp }}
-      boards-nrf: ${{ steps.set-matrix.outputs.boards-nrf }}
       boards-riscv: ${{ steps.set-matrix.outputs.boards-riscv }}
-      boards-rpi: ${{ steps.set-matrix.outputs.boards-rpi }}
       cp-version: ${{ steps.set-up-submodules.outputs.version }}
     steps:
     - name: Dump GitHub context
@@ -55,24 +55,23 @@ jobs:
       uses: ./.github/actions/deps/external
       with:
         action: cache
-    # Disabled: Needs to be updated
-    # - name: Get last commit with checks
-    #   id: get-last-commit-with-checks
-    #   if: github.event_name == 'pull_request'
-    #   working-directory: tools
-    #   run: python3 -u ci_changes_per_commit.py
-    #   env:
-    #     REPO: ${{ github.repository }}
-    #     PULL: ${{ github.event.number }}
-    #     GITHUB_TOKEN: ${{ github.token }}
-    #     EXCLUDE_COMMIT: ${{ github.event.after }}
     - name: Set up mpy-cross
       uses: ./.github/actions/mpy_cross
       with:
         download: false
+    - name: Get last commit with checks
+      id: get-last-commit-with-checks
+      if: github.event_name == 'pull_request'
+      working-directory: tools
+      run: python3 -u ci_changes_per_commit.py
+      env:
+        REPO: ${{ github.repository }}
+        PULL: ${{ github.event.number }}
+        GITHUB_TOKEN: ${{ github.token }}
+        EXCLUDE_COMMIT: ${{ github.event.pull_request.head.sha }}
     - name: Set head sha
       if: github.event_name == 'pull_request'
-      run: echo "HEAD_SHA=$(git show -s --format=%s $GITHUB_SHA | grep -o -P "(?<=Merge ).*(?= into)")" >> $GITHUB_ENV
+      run: echo "HEAD_SHA=${{ github.event.pull_request.head.sha }}" >> $GITHUB_ENV
     - name: Set base sha
       if: github.event_name == 'pull_request'
       run: |
@@ -220,6 +219,74 @@ jobs:
         [ -z "$TWINE_USERNAME" ] || echo "Uploading dev release to PyPi"
         [ -z "$TWINE_USERNAME" ] || twine upload circuitpython-stubs/dist/*
 
+  build-windows:
+    runs-on: windows-2022
+    needs: scheduler
+    if: ${{ needs.scheduler.outputs.build-windows == 'True' }}
+    env:
+      CP_VERSION: ${{ needs.scheduler.outputs.cp-version }}
+    defaults:
+      run:
+        # We define a custom shell script here, although `msys2.cmd` does neither exist nor is it available in the PATH yet
+        shell: msys2 {0}
+    steps:
+    # We want to change the configuration of the git command that actions/checkout will be using
+    # (since it is not possible to set autocrlf through the action yet, see actions/checkout#226).
+    - run: git config --global core.autocrlf input
+      shell: bash
+    - name: Check python coding (cmd)
+      run: python -c "import sys, locale; print(sys.getdefaultencoding(), locale.getpreferredencoding(False))"
+      shell: cmd
+    # We use a JS Action, which calls the system terminal or other custom terminals directly, if required
+    - uses: msys2/setup-msys2@v2
+      with:
+        install: base-devel git wget unzip gcc python-pip
+    # The goal of this was to test how things worked when the default file encoding (locale.getpreferedencoding())
+    # was not UTF-8. However, msys2 python does use utf-8 as the preferred file encoding, and using actions/setup-python
+    # python3.8 gave a broken build, so we're not really testing what we wanted to test.
+    # However, commandline length limits are being tested so that does some good.
+    - name: Check python coding (msys2)
+      run: |
+        locale -v
+        which python; python --version
+        python -c "import sys, locale; print(sys.getdefaultencoding(), locale.getpreferredencoding(False))"
+        which python3; python3 --version
+        python3 -c "import sys, locale; print(sys.getdefaultencoding(), locale.getpreferredencoding(False))"
+    - name: Install dependencies
+      run: |
+        wget --no-verbose -O gcc-arm.zip https://developer.arm.com/-/media/Files/downloads/gnu-rm/10-2020q4/gcc-arm-none-eabi-10-2020-q4-major-win32.zip
+        unzip -q -d /tmp gcc-arm.zip
+        tar -C /tmp/gcc-arm-none-* -cf - . | tar -C /usr/local -xf -
+        pip install wheel
+        # requirements_dev.txt doesn't install on windows. (with msys2 python)
+        # instead, pick a subset for what we want to do
+        pip install cascadetoml jinja2 typer click intelhex
+        # check that installed packages work....?
+        which python; python --version; python -c "import cascadetoml"
+        which python3; python3 --version; python3 -c "import cascadetoml"
+    - name: Set up repository
+      uses: actions/checkout@v3
+      with:
+        submodules: false
+        fetch-depth: 1
+    - name: Set up submodules
+      uses: ./.github/actions/deps/submodules
+    - name: build mpy-cross
+      run: make -j2 -C mpy-cross
+    - name: build rp2040
+      run: make -j2 -C ports/raspberrypi BOARD=adafruit_feather_rp2040 TRANSLATION=de_DE
+    - name: build samd21
+      run: make -j2 -C ports/atmel-samd BOARD=feather_m0_express TRANSLATION=zh_Latn_pinyin
+    - name: build samd51
+      run: make -j2 -C ports/atmel-samd BOARD=feather_m4_express TRANSLATION=es
+    - name: build nrf
+      run: make -j2 -C ports/nrf BOARD=feather_nrf52840_express TRANSLATION=fr
+    - name: build stm
+      run: make -j2 -C ports/stm BOARD=feather_stm32f405_express TRANSLATION=pt_BR
+    # I gave up trying to do esp builds on windows when I saw
+    # ERROR: Platform MINGW64_NT-10.0-17763-x86_64 appears to be unsupported
+    # https://github.com/espressif/esp-idf/issues/7062
+
   aarch:
     needs: [scheduler, mpy-cross, tests]
     if: ${{ needs.scheduler.outputs.boards-aarch != '[]' }}
@@ -240,6 +307,16 @@ jobs:
       boards: ${{ needs.scheduler.outputs.boards-arm }}
       cp-version: ${{ needs.scheduler.outputs.cp-version }}
 
+  atmel:
+    needs: [scheduler, mpy-cross, tests]
+    if: ${{ needs.scheduler.outputs.boards-atmel != '[]' }}
+    uses: ./.github/workflows/build-boards.yml
+    secrets: inherit
+    with:
+      platform: arm
+      boards: ${{ needs.scheduler.outputs.boards-atmel }}
+      cp-version: ${{ needs.scheduler.outputs.cp-version }}
+
   esp:
     needs: [scheduler, mpy-cross, tests]
     if: ${{ needs.scheduler.outputs.boards-esp != '[]' }}
@@ -250,16 +327,6 @@ jobs:
       boards: ${{ needs.scheduler.outputs.boards-esp }}
       cp-version: ${{ needs.scheduler.outputs.cp-version }}
 
-  nrf:
-    needs: [scheduler, mpy-cross, tests]
-    if: ${{ needs.scheduler.outputs.boards-nrf != '[]' }}
-    uses: ./.github/workflows/build-boards.yml
-    secrets: inherit
-    with:
-      platform: nrf
-      boards: ${{ needs.scheduler.outputs.boards-nrf }}
-      cp-version: ${{ needs.scheduler.outputs.cp-version }}
-
   riscv:
     needs: [scheduler, mpy-cross, tests]
     if: ${{ needs.scheduler.outputs.boards-riscv != '[]' }}
@@ -269,13 +336,3 @@ jobs:
       platform: riscv
       boards: ${{ needs.scheduler.outputs.boards-riscv }}
       cp-version: ${{ needs.scheduler.outputs.cp-version }}
-
-  rpi:
-    needs: [scheduler, mpy-cross, tests]
-    if: ${{ needs.scheduler.outputs.boards-rpi != '[]' }}
-    uses: ./.github/workflows/build-boards.yml
-    secrets: inherit
-    with:
-      platform: arm
-      boards: ${{ needs.scheduler.outputs.boards-rpi }}
-      cp-version: ${{ needs.scheduler.outputs.cp-version }}

.github/workflows/ports_windows.yml

@@ -1,111 +0,0 @@
-name: windows port
-
-on:
-  push:
-  pull_request:
-    paths:
-      - '.github/workflows/ports_windows.yml'
-      - 'extmod/**'
-      - 'lib/**'
-      - 'mpy-cross/**'
-      - 'ports/unix/**'
-      - 'ports/windows/**'
-      - 'py/**'
-      - 'requirements*.txt'
-      - 'tools/**'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  windows:
-    runs-on: windows-2022
-    defaults:
-      run:
-        # We define a custom shell script here, although `msys2.cmd` does neither exist nor is it available in the PATH yet
-        shell: msys2 {0}
-    steps:
-
-    # We want to change the configuration of the git command that actions/checkout will be using (since it is not possible to set autocrlf through the action yet, see actions/checkout#226).
-    - run: git config --global core.autocrlf input
-      shell: bash
-
-    - name: Check python coding (cmd)
-      run: python -c "import sys, locale; print(sys.getdefaultencoding(), locale.getpreferredencoding(False))"
-      shell: cmd
-
-    # We use a JS Action, which calls the system terminal or other custom terminals directly, if required
-    - uses: msys2/setup-msys2@v2
-      with:
-        update: true
-        install: base-devel git wget unzip gcc python-pip
-
-    # The goal of this was to test how things worked when the default file
-    # encoding (locale.getpreferedencoding()) was not UTF-8.  However, msys2
-    # python does use utf-8 as the preferred file encoding, and using
-    # actions/setup-python python3.8 gave a broken build, so we're not really
-    # testing what we wanted to test.
-    #
-    # however, commandline length limits are being tested so that does some
-    # good.
-    - name: Check python coding (msys2)
-      run: |
-        locale -v
-        which python; python --version
-        python -c "import sys, locale; print(sys.getdefaultencoding(), locale.getpreferredencoding(False))"
-        which python3; python3 --version
-        python3 -c "import sys, locale; print(sys.getdefaultencoding(), locale.getpreferredencoding(False))"
-
-    - name: Install dependencies
-      run: |
-        wget --no-verbose -O gcc-arm.zip https://developer.arm.com/-/media/Files/downloads/gnu-rm/10-2020q4/gcc-arm-none-eabi-10-2020-q4-major-win32.zip
-        unzip -q -d /tmp gcc-arm.zip
-        tar -C /tmp/gcc-arm-none-* -cf - . | tar -C /usr/local -xf -
-        pip install wheel
-        # requirements_dev.txt doesn't install on windows. (with msys2 python)
-        # instead, pick a subset for what we want to do
-        pip install cascadetoml jinja2 typer click intelhex
-        # check that installed packages work....?
-        which python; python --version; python -c "import cascadetoml"
-        which python3; python3 --version; python3 -c "import cascadetoml"
-
-    - name: Set up repository
-      uses: actions/checkout@v3
-      with:
-        submodules: false
-        fetch-depth: 1
-
-    - name: Set up submodules
-      uses: ./.github/actions/deps/submodules
-      with:
-        version: true
-
-    - name: build mpy-cross
-      run: make -j2 -C mpy-cross
-
-    - name: build rp2040
-      run: make -j2 -C ports/raspberrypi BOARD=adafruit_feather_rp2040 TRANSLATION=de_DE
-
-    - name: build samd21
-      run: make -j2 -C ports/atmel-samd BOARD=feather_m0_express TRANSLATION=zh_Latn_pinyin
-
-    - name: build samd51
-      run: make -j2 -C ports/atmel-samd BOARD=feather_m4_express TRANSLATION=es
-
-    - name: build nrf
-      run: make -j2 -C ports/nrf BOARD=feather_nrf52840_express TRANSLATION=fr
-
-    - name: build stm
-      run: make -j2 -C ports/stm BOARD=feather_stm32f405_express TRANSLATION=pt_BR
-
-# I gave up trying to do esp32 builds on windows when I saw
-# ERROR: Platform MINGW64_NT-10.0-17763-x86_64 appears to be unsupported
-# https://github.com/espressif/esp-idf/issues/7062
-#
-#    - name: prepare esp
-#      run: ports/espressif/esp-idf/install.bat
-#      shell: cmd
-#
-#    - name: build esp
-#      run: . ports/espressif/esp-idf/export.sh && make -j2 -C ports/espressif BOARD=adafruit_metro_esp32s2

.gitmodules

@@ -187,10 +187,6 @@
 [submodule "frozen/Adafruit_CircuitPython_APDS9960"]
 	path = frozen/Adafruit_CircuitPython_APDS9960
 	url = https://github.com/adafruit/Adafruit_CircuitPython_APDS9960
-[submodule "ports/broadcom/peripherals"]
-	path = ports/broadcom/peripherals
-	url = https://github.com/adafruit/broadcom-peripherals.git
-	branch = main-build
 [submodule "rpi-firmware"]
 	path = ports/broadcom/firmware
 	url = https://github.com/raspberrypi/rpi-firmware.git
@@ -328,3 +324,7 @@
 [submodule "frozen/Adafruit_CircuitPython_SSD1680"]
 	path = frozen/Adafruit_CircuitPython_SSD1680
 	url = https://github.com/adafruit/Adafruit_CircuitPython_SSD1680
+[submodule "ports/broadcom/peripherals"]
+	path = ports/broadcom/peripherals
+	url = https://github.com/adafruit/broadcom-peripherals.git
+	branch = main-build

locale/ID.po

@@ -30,6 +30,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2419,6 +2427,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/circuitpython.pot

@@ -28,6 +28,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2389,6 +2397,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/cs.po

@@ -32,6 +32,14 @@ msgstr ""
 "\n"
 "Kód byl zastaven kvůli automatickému načtení. K načtení dojde brzy.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2406,6 +2414,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/de_DE.po

@@ -31,6 +31,14 @@ msgstr ""
 "\n"
 "Code wurde durch automatisches Neuladen gestoppt. Wird bald neu geladen.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2455,6 +2463,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/el.po

@@ -35,6 +35,14 @@ msgstr ""
 "Ο κώδικας σταμάτησε λόγω της αυτόματης επαναφόρτωσης. Η επαναφόρτωση θα "
 "γίνει σύντομα.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2414,6 +2422,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/en_GB.po

@@ -34,6 +34,14 @@ msgstr ""
 "\n"
 "Code stopped by auto-reload. Reloading soon.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2414,6 +2422,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/es.po

@@ -8,8 +8,8 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-02-20 03:39+0000\n"
+"PO-Revision-Date: 2023-02-23 17:53+0000\n"
-"Last-Translator: Jose David M <jquintana202020@gmail.com>\n"
+"Last-Translator: Luis Ruiz San Segundo <luisan00@hotmail.com>\n"
 "Language-Team: \n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
@@ -34,6 +34,19 @@ msgstr ""
 "\n"
 "Código detenido por la auto-recarga. Recargando pronto.\n"
 
+#: main.c
+#, fuzzy
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+"\n"
+"CIRCUITPY_PYSTACK_SIZE no válido\n"
+"\n"
+"\n"
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -50,7 +63,7 @@ msgid ""
 "Press reset to exit safe mode.\n"
 msgstr ""
 "\n"
-"Presione reset para salir de safe mode.\n"
+"Presione reset para salir del modo seguro.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -58,7 +71,7 @@ msgid ""
 "You are in safe mode because:\n"
 msgstr ""
 "\n"
-"Estas in safe mode porque:\n"
+"Estas en modo seguro porque:\n"
 
 #: py/obj.c
 msgid "  File \"%q\""
@@ -145,7 +158,7 @@ msgstr "%q está siendo utilizado"
 
 #: py/objstr.c py/objstrunicode.c
 msgid "%q index out of range"
-msgstr "%q indice fuera de rango"
+msgstr "%q índice fuera de rango"
 
 #: shared-module/bitbangio/SPI.c
 msgid "%q init failed"
@@ -161,19 +174,19 @@ msgstr "%q es solamente de lectura en esta tarjeta"
 
 #: py/argcheck.c shared-bindings/usb_hid/Device.c
 msgid "%q length must be %d"
-msgstr "%q tamaño debe ser %d"
+msgstr "%q longitud debe ser %d"
 
 #: py/argcheck.c
 msgid "%q length must be %d-%d"
-msgstr "%q tamaño debe ser %d-%d"
+msgstr "%q longitud debe ser %d-%d"
 
 #: py/argcheck.c
 msgid "%q length must be <= %d"
-msgstr "%q tamaño debe ser <= %d"
+msgstr "%q longitud debe ser <= %d"
 
 #: py/argcheck.c
 msgid "%q length must be >= %d"
-msgstr "%q tamaño debe ser >= %d"
+msgstr "%q longitud debe ser >= %d"
 
 #: py/argcheck.c
 msgid "%q must be %d"
@@ -197,7 +210,7 @@ msgstr "%q debe ser >= %d"
 
 #: shared-bindings/analogbufio/BufferedIn.c
 msgid "%q must be a bytearray or array of type 'H' or 'B'"
-msgstr "%q debe ser un byte-matriz o matriz de tipo 'H' o 'B'"
+msgstr "%q debe ser un bytearray o array de tipo 'H' o 'B'"
 
 #: shared-bindings/audiocore/RawSample.c
 msgid "%q must be a bytearray or array of type 'h', 'H', 'b', or 'B'"
@@ -243,7 +256,7 @@ msgstr "%q() toma %d argumentos posicionales pero %d fueron dados"
 
 #: shared-bindings/usb_hid/Device.c
 msgid "%q, %q, and %q must all be the same length"
-msgstr "%q, %q, y %q deben tener el mismo largo"
+msgstr "%q, %q, y %q deben tener la misma longitud"
 
 #: py/objint.c shared-bindings/storage/__init__.c
 msgid "%q=%q"
@@ -349,7 +362,7 @@ msgstr "'=' alineación no permitida en el especificador string format"
 
 #: shared-module/struct/__init__.c
 msgid "'S' and 'O' are not supported format types"
-msgstr "'S' y 'O' no son compatibles con los tipos de formato"
+msgstr "'S' y 'O' no son tipos de formato soportados"
 
 #: py/compile.c
 msgid "'align' requires 1 argument"
@@ -423,7 +436,7 @@ msgstr "tipos de 64 bit"
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
-msgstr "El canal EXTINT ya está siendo utilizado"
+msgstr "Un canal de interrupción por hardware ya está en uso"
 
 #: ports/espressif/common-hal/analogio/AnalogIn.c
 msgid "ADC2 is being used by WiFi"
@@ -432,7 +445,7 @@ msgstr "ADC2 está siendo usado por WiFi"
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
-msgstr "La dirección debe tener %d bytes de largo"
+msgstr "La dirección debe tener %d bytes de longitud"
 
 #: ports/espressif/common-hal/memorymap/AddressRange.c
 msgid "Address range not allowed"
@@ -446,7 +459,7 @@ msgstr "Todos los periféricos CAN están en uso"
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
-msgstr "Todos los periféricos I2C están siendo usados"
+msgstr "Todos los periféricos I2C están en uso"
 
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
@@ -462,36 +475,36 @@ msgstr "Todos los FIFOs de RX en uso"
 
 #: ports/espressif/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
-msgstr "Todos los periféricos SPI están siendo usados"
+msgstr "Todos los periféricos SPI están en uso"
 
 #: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
-msgstr "Todos los periféricos UART están siendo usados"
+msgstr "Todos los periféricos UART están en uso"
 
 #: ports/nrf/common-hal/countio/Counter.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/rotaryio/IncrementalEncoder.c
 #: shared-bindings/pwmio/PWMOut.c
 msgid "All channels in use"
-msgstr "Todos los canales esta en uso"
+msgstr "Todos los canales están en uso"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
-msgstr "Todos los canales de eventos estan siendo usados"
+msgstr "Todos los canales de eventos están en uso"
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "All state machines in use"
-msgstr "Todas las máquinas de estado en uso"
+msgstr "Todas las máquinas de estado están en uso"
 
 #: ports/atmel-samd/audio_dma.c
 msgid "All sync event channels in use"
 msgstr ""
 "Todos los canales de eventos de sincronización (sync event channels) están "
-"siendo utilizados"
+"en uso"
 
 #: shared-bindings/pwmio/PWMOut.c
 msgid "All timers for this pin are in use"
-msgstr "Todos los timers para este pin están siendo utilizados"
+msgstr "Todos los timers para este pin están en uso"
 
 #: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -560,7 +573,7 @@ msgstr "Tratando de localizar %d bloques"
 
 #: ports/raspberrypi/audio_dma.c
 msgid "Audio conversion not implemented"
-msgstr "Conversión de audio no esta implementada"
+msgstr "Conversión de audio no está implementada"
 
 #: shared-bindings/wifi/Radio.c
 msgid "AuthMode.OPEN is not used with password"
@@ -579,12 +592,12 @@ msgid ""
 "Auto-reload is on. Simply save files over USB to run them or enter REPL to "
 "disable.\n"
 msgstr ""
-"Auto-reload habilitado. Simplemente guarda los archivos via USB para "
+"Auto-reload habilitado. Simplemente guarda los archivos vía USB para "
-"ejecutarlos o entra al REPL para desabilitarlos.\n"
+"ejecutarlos o entra al REPL para deshabilitarlo.\n"
 
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "Baudrate not supported by peripheral"
-msgstr "El periférico no maneja el Baudrate"
+msgstr "Baudrate no soportado por el periférico"
 
 #: shared-module/displayio/Display.c
 #: shared-module/framebufferio/FramebufferDisplay.c
@@ -605,7 +618,7 @@ msgstr "Bits depth debe ser múltiplo de 8."
 
 #: shared-bindings/bitmaptools/__init__.c
 msgid "Bitmap size and bits per value must match"
-msgstr "El tamaño del mapa de bits y los bits por valor deben cotejar"
+msgstr "El tamaño del mapa de bits y los bits por valor deben coincidir"
 
 #: supervisor/shared/safe_mode.c
 msgid "Boot device must be first (interface #0)."
@@ -634,44 +647,43 @@ msgstr "El brillo no se puede ajustar"
 #: shared-bindings/_bleio/UUID.c
 #, c-format
 msgid "Buffer + offset too small %d %d %d"
-msgstr "Búfer + compensado muy pequeños %d %d %d"
+msgstr "Buffer + offset muy pequeños %d %d %d"
 
 #: ports/raspberrypi/bindings/rp2pio/StateMachine.c
 msgid "Buffer elements must be 4 bytes long or less"
-msgstr ""
+msgstr "Los elementos del buffer deben tener una longitud de 4 bytes o menos"
-"Los elementos del búfer deben de ser de una longitud de 4 bytes o menos"
 
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is not a bytearray."
-msgstr "Búfer no es un bytearray."
+msgstr "Buffer no es un bytearray."
 
 #: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is too small"
-msgstr "Búfer es muy pequeño"
+msgstr "Buffer es muy pequeño"
 
 #: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
-msgstr "Longitud del búfer %d es demasiado grande. Tiene que ser menor a %d"
+msgstr "La longitud del buffer %d es demasiado grande. Tiene que ser menor a %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 #: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
-msgstr "El tamaño del búfer debe ser múltiplo de 512"
+msgstr "El tamaño del buffer debe ser múltiplo de 512"
 
 #: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c
 msgid "Buffer must be a multiple of 512 bytes"
-msgstr "Búfer deber ser un múltiplo de 512 bytes"
+msgstr "El buffer deber ser un múltiplo de 512 bytes"
 
 #: shared-bindings/_bleio/PacketBuffer.c
 #, c-format
 msgid "Buffer too short by %d bytes"
-msgstr "Búfer muy corto por %d bytes"
+msgstr "Buffer muy corto por %d bytes"
 
 #: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Buffers must be same size"
-msgstr "Búferes deben ser del mismo tamaño"
+msgstr "Los buffers deben ser del mismo tamaño"
 
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
@@ -758,7 +770,7 @@ msgstr ""
 
 #: ports/espressif/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot pull on input-only pin."
-msgstr "No puede hacer pull en un pin de entrada sola."
+msgstr "No puede hacer pull en un pin de solo entrada."
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Cannot record to a file"
@@ -1844,7 +1856,7 @@ msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
-"Pretendiendo ir a deep sleep hasta la alarma, CTRL-C or una escritura de "
+"Pretendiendo ir a deep sleep hasta la alarma, CTRL-C o una escritura de "
 "archivo\n"
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
@@ -2461,38 +2473,42 @@ msgstr "Usted presionó ambos botones al iniciar."
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
 msgid "You pressed button A at start up."
-msgstr "Usted presionó el boton A al iniciar."
+msgstr "Usted presionó el botón A al iniciar."
 
 #: supervisor/shared/safe_mode.c
 msgid "You pressed the BOOT button at start up"
-msgstr "Usted presionó el boton BOOT al iniciar"
+msgstr "Usted presionó el botón BOOT al iniciar"
 
 #: ports/espressif/boards/adafruit_huzzah32_breakout/mpconfigboard.h
 msgid "You pressed the GPIO0 button at start up."
-msgstr ""
+msgstr "Presionaste el botón GPIO0 al inicio."
+
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr "Presionó el botón Rec al inicio."
 
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
-msgstr "Usted presionó el boton SW38 al iniciar."
+msgstr "Usted presionó el botón SW38 al iniciar."
 
 #: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
 msgid "You pressed the VOLUME button at start up."
-msgstr "Usted presionó el boton de Volumén al iniciar."
+msgstr "Usted presionó el botón de volumen al iniciar."
 
 #: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
 msgid "You pressed the central button at start up."
-msgstr "Usted presionó el boton central al iniciar."
+msgstr "Usted presionó el botón central al iniciar."
 
 #: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
 msgid "You pressed the left button at start up."
-msgstr "Usted presionó el boton izquierdo al iniciar."
+msgstr "Usted presionó el botón izquierdo al iniciar."
 
 #: supervisor/shared/safe_mode.c
 msgid "You pressed the reset button during boot."
-msgstr "Usted presionó el boton izquierdo al iniciar."
+msgstr "Presionó el botón de reinicio durante el arranque."
 
 #: supervisor/shared/micropython.c
 msgid "[truncated due to length]"

locale/fil.po

@@ -29,6 +29,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2409,6 +2417,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/fr.po

@@ -8,14 +8,14 @@ msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2022-12-27 18:02+0000\n"
+"PO-Revision-Date: 2023-02-22 18:34+0000\n"
-"Last-Translator: Blinka CircuitPython <limor@ladyada.net>\n"
+"Last-Translator: Neradoc <weblate@ri1.fr>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=utf-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.15.1-dev\n"
+"X-Generator: Weblate 4.16-dev\n"
 
 #: main.c
 msgid ""
@@ -34,6 +34,14 @@ msgstr ""
 "Le code a été arrêté par l'actualisation automatique. Rechargement "
 "prochain.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -46,12 +54,16 @@ msgid ""
 "\n"
 "Press reset to exit safe mode.\n"
 msgstr ""
+"\n"
+"Appuyer sur reset pour sortir du mode sûr.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "You are in safe mode because:\n"
 msgstr ""
+"\n"
+"Le mode sûr est actif:\n"
 
 #: py/obj.c
 msgid "  File \"%q\""
@@ -127,7 +139,7 @@ msgstr "Échec de %q : %d"
 
 #: py/argcheck.c
 msgid "%q in %q must be of type %q, not %q"
-msgstr ""
+msgstr "%q dans %q doit être de type %q, pas %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
@@ -150,7 +162,7 @@ msgstr ""
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "%q is read-only for this board"
-msgstr ""
+msgstr "%q est en lecture seule sur cette carte"
 
 #: py/argcheck.c shared-bindings/usb_hid/Device.c
 msgid "%q length must be %d"
@@ -190,7 +202,7 @@ msgstr "%q doit être >= %d"
 
 #: shared-bindings/analogbufio/BufferedIn.c
 msgid "%q must be a bytearray or array of type 'H' or 'B'"
-msgstr ""
+msgstr "%q doit être un bytearray ou matrice de type 'H' ou 'B'"
 
 #: shared-bindings/audiocore/RawSample.c
 msgid "%q must be a bytearray or array of type 'h', 'H', 'b', or 'B'"
@@ -199,11 +211,11 @@ msgstr "%q doit être a bytearray ou array de type 'h', 'H', 'b', ou 'B'"
 #: ports/raspberrypi/bindings/cyw43/__init__.c py/argcheck.c py/objexcept.c
 #: shared-bindings/canio/CAN.c shared-bindings/digitalio/Pull.c
 msgid "%q must be of type %q or %q, not %q"
-msgstr ""
+msgstr "%q doit être de type %q ou %q, pas %q"
 
 #: py/argcheck.c py/obj.c py/objstrunicode.c
 msgid "%q must be of type %q, not %q"
-msgstr ""
+msgstr "%q doit être de type %q, pas %q"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "%q must be power of 2"
@@ -228,7 +240,7 @@ msgstr "broche %q invalide"
 
 #: py/objrange.c py/objslice.c shared-bindings/random/__init__.c
 msgid "%q step cannot be zero"
-msgstr ""
+msgstr "le pas ne peut être zéro dans %q"
 
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
@@ -429,7 +441,7 @@ msgstr "L'adresse doit être longue de %d octets"
 
 #: ports/espressif/common-hal/memorymap/AddressRange.c
 msgid "Address range not allowed"
-msgstr ""
+msgstr "Plage d'adresses non autorisée"
 
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
@@ -524,7 +536,7 @@ msgstr "Déjà à la recherche des réseaux wifi"
 #: shared-module/os/getenv.c
 #, c-format
 msgid "An error occurred while retrieving '%s':\n"
-msgstr ""
+msgstr "Erreur survenue en récupérant '%s':\n"
 
 #: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
 msgid "Another PWMAudioOut is already active"
@@ -921,7 +933,7 @@ msgstr ""
 
 #: py/obj.c
 msgid "During handling of the above exception, another exception occurred:"
-msgstr ""
+msgstr "Pendant la gestion de cette exception, un autre s'est produite:"
 
 #: shared-bindings/aesio/aes.c
 msgid "ECB only operates on 16 bytes at a time"
@@ -950,7 +962,7 @@ msgstr "Erreur dans l'expression régulière"
 
 #: supervisor/shared/safe_mode.c
 msgid "Error in safemode.py."
-msgstr ""
+msgstr "Erreur dans safemode.py."
 
 #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
 msgid "Error: Failure to bind"
@@ -958,7 +970,7 @@ msgstr "Erreur : Impossible de lier"
 
 #: shared-bindings/alarm/__init__.c
 msgid "Expected a kind of %q"
-msgstr ""
+msgstr "Argument de type %q attendu"
 
 #: ports/espressif/common-hal/_bleio/Adapter.c
 #: ports/nrf/common-hal/_bleio/Adapter.c
@@ -1035,7 +1047,7 @@ msgstr "Le fichier existe"
 
 #: shared-module/os/getenv.c
 msgid "File not found"
-msgstr ""
+msgstr "Fichier non trouvé"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
 #: ports/espressif/common-hal/canio/Listener.c
@@ -1123,12 +1135,12 @@ msgstr "Matériel utilisé, essayez d'autres broches"
 
 #: supervisor/shared/safe_mode.c
 msgid "Heap allocation when VM not running."
-msgstr ""
+msgstr "Allocation du tas en dehors de la MV."
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Heap was corrupted because the stack was too small. Increase stack size."
-msgstr ""
+msgstr "Tas corrompu parce que la pile était trop petite. Augmenter la pile."
 
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
@@ -1141,7 +1153,7 @@ msgstr "Erreur d'initialisation I2C"
 #: ports/raspberrypi/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "I2C peripheral in use"
-msgstr "périphérique I2C utilisé"
+msgstr "Périphérique I2C utilisé"
 
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
@@ -1258,7 +1270,7 @@ msgstr "Le minuteur du watchdog interne a expiré."
 
 #: supervisor/shared/safe_mode.c
 msgid "Interrupt error."
-msgstr ""
+msgstr "Erreur d'interruption."
 
 #: py/argcheck.c shared-bindings/digitalio/DigitalInOut.c
 msgid "Invalid %q"
@@ -1297,7 +1309,7 @@ msgstr "Bits par valeur invalides"
 #: shared-module/os/getenv.c
 #, c-format
 msgid "Invalid byte %.*s"
-msgstr ""
+msgstr "Octet invalide %.*s"
 
 #: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
 #, c-format
@@ -1327,7 +1339,7 @@ msgstr "État invalide"
 
 #: shared-module/os/getenv.c
 msgid "Invalid unicode escape"
-msgstr ""
+msgstr "Séquence unicode invalide"
 
 #: shared-bindings/aesio/aes.c
 msgid "Key must be 16, 24, or 32 bytes long"
@@ -1335,7 +1347,7 @@ msgstr "La clé doit comporter 16, 24 ou 32 octets"
 
 #: shared-module/os/getenv.c
 msgid "Key not found"
-msgstr ""
+msgstr "Clé non trouvée"
 
 #: shared-module/is31fl3741/FrameBuffer.c
 msgid "LED mappings must match display size"
@@ -1448,7 +1460,7 @@ msgstr "Erreur NVS"
 
 #: shared-bindings/socketpool/SocketPool.c
 msgid "Name or service not known"
-msgstr ""
+msgstr "Nom ou service inconnu"
 
 #: py/qstr.c
 msgid "Name too long"
@@ -1693,7 +1705,7 @@ msgstr "Une seul %q autorisée en sommeil profond."
 
 #: ports/espressif/common-hal/espulp/ULPAlarm.c
 msgid "Only one %q can be set."
-msgstr ""
+msgstr "Un seul %q peut être défini."
 
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
@@ -1729,7 +1741,7 @@ msgstr "Timeout de l'opération"
 
 #: ports/raspberrypi/common-hal/mdns/Server.c
 msgid "Out of MDNS service slots"
-msgstr ""
+msgstr "À cours de services MDNS"
 
 #: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
 msgid "Out of memory"
@@ -1865,7 +1877,7 @@ msgstr "Taille du programme invalide"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 msgid "Program too long"
-msgstr ""
+msgstr "Programme trop long"
 
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@@ -2047,7 +2059,7 @@ msgstr "Canal stéréo droit doit être sur le canal PWM B"
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Stopping AP is not supported."
-msgstr ""
+msgstr "Stopper n'est pas supporté."
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
@@ -2067,11 +2079,11 @@ msgstr "Délais de lecture de température dépassée"
 
 #: supervisor/shared/safe_mode.c
 msgid "The `microcontroller` module was used to boot into safe mode."
-msgstr ""
+msgstr "Le module microcontroller a été utilisé pour démarrer en mode sûr."
 
 #: py/obj.c
 msgid "The above exception was the direct cause of the following exception:"
-msgstr ""
+msgstr "L'exception précédente est la cause directe de l'exception suivante:"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
@@ -2079,7 +2091,7 @@ msgstr "La taille de rgb_pins doit être 6, 12, 18, 24 ou 30"
 
 #: supervisor/shared/safe_mode.c
 msgid "The power dipped. Make sure you are providing enough power."
-msgstr ""
+msgstr "La puissance a chu. Assurez vous de fournir assez de puissance."
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -2100,7 +2112,7 @@ msgstr "Le signe de l'échantillon ne correspond pas à celui du mixer"
 
 #: supervisor/shared/safe_mode.c
 msgid "Third-party firmware fatal error."
-msgstr ""
+msgstr "Erreur fatale de logiciel système tierce partie."
 
 #: shared-module/imagecapture/ParallelImageCapture.c
 msgid "This microcontroller does not support continuous capture."
@@ -2182,7 +2194,7 @@ msgstr "Initialisation UART"
 
 #: ports/raspberrypi/common-hal/busio/UART.c
 msgid "UART peripheral in use"
-msgstr ""
+msgstr "Périphérique UART utilisé"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART re-init"
@@ -2237,7 +2249,7 @@ msgstr "Impossible d'allouer des tampons pour une conversion signée"
 
 #: supervisor/shared/safe_mode.c
 msgid "Unable to allocate the heap."
-msgstr ""
+msgstr "Impossible d'allouer le tas."
 
 #: ports/espressif/common-hal/busio/I2C.c
 msgid "Unable to create lock"
@@ -2268,7 +2280,7 @@ msgstr "Impossible de lancer la requête mDNS"
 
 #: shared-bindings/memorymap/AddressRange.c
 msgid "Unable to write to address."
-msgstr ""
+msgstr "L'écriture a échoué."
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
@@ -2437,15 +2449,15 @@ msgstr "Wi-Fi : "
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Wifi is in access point mode."
-msgstr ""
+msgstr "Wifi en mode point d'accès."
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Wifi is in station mode."
-msgstr ""
+msgstr "Wifi en mode station."
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Wifi is not enabled"
-msgstr ""
+msgstr "Le wifi n'est pas activé"
 
 #: main.c
 msgid "Woken up by alarm.\n"
@@ -2461,48 +2473,52 @@ msgstr "Écritures non supporté vers les Characteristic"
 #: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
 #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
 msgid "You pressed both buttons at start up."
-msgstr ""
+msgstr "Vous avez appuyé les deux boutons au démarrage."
 
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
 msgid "You pressed button A at start up."
-msgstr ""
+msgstr "Vous avez appuyé le bouton A au démarrage."
 
 #: supervisor/shared/safe_mode.c
 msgid "You pressed the BOOT button at start up"
-msgstr ""
+msgstr "Vous avez appuyé le bouton BOOT au démarrage"
 
 #: ports/espressif/boards/adafruit_huzzah32_breakout/mpconfigboard.h
 msgid "You pressed the GPIO0 button at start up."
+msgstr "Vous avez appuyé le bouton GPIO0 au démarrage."
+
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
 msgstr ""
 
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
-msgstr ""
+msgstr "Vous avez appuyé le bouton SW38 au démarrage."
 
 #: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
 msgid "You pressed the VOLUME button at start up."
-msgstr ""
+msgstr "Vous avez appuyé le bouton VOLUME au démarrage."
 
 #: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
 msgid "You pressed the central button at start up."
-msgstr ""
+msgstr "Vous avez appuyé le bouton central au démarrage."
 
 #: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
 msgid "You pressed the left button at start up."
-msgstr ""
+msgstr "Vous avez appuyé le bouton gauche au démarrage."
 
 #: supervisor/shared/safe_mode.c
 msgid "You pressed the reset button during boot."
-msgstr ""
+msgstr "Vous avez appuyé le bouton reset au démarrage."
 
 #: supervisor/shared/micropython.c
 msgid "[truncated due to length]"
-msgstr ""
+msgstr "[taille limite atteinte]"
 
 #: py/objtype.c
 msgid "__init__() should return None"
@@ -2575,7 +2591,7 @@ msgstr "la tableau à trop de dimensions"
 
 #: extmod/ulab/code/ndarray.c
 msgid "array is too big"
-msgstr ""
+msgstr "matrice trop grande"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
@@ -2802,7 +2818,7 @@ msgstr "attribut non modifiable"
 
 #: py/runtime.c
 msgid "can't set attribute '%q'"
-msgstr ""
+msgstr "attribut '%q' non modifiable"
 
 #: py/emitnative.c
 msgid "can't store '%q'"
@@ -3068,6 +3084,8 @@ msgid ""
 "espcamera.Camera requires reserved PSRAM to be configured. See the "
 "documentation for instructions."
 msgstr ""
+"espcamera.Camera a besoin de PSRAM réservée. Voir la documentation pour les "
+"instructions."
 
 #: py/runtime.c
 msgid "exceptions must derive from BaseException"
@@ -3285,7 +3303,7 @@ msgstr "l'index est hors limites"
 
 #: shared-bindings/_pixelmap/PixelMap.c
 msgid "index must be tuple or int"
-msgstr ""
+msgstr "l'index doit être un tuple ou entier"
 
 #: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
 #: ports/espressif/common-hal/pulseio/PulseIn.c
@@ -3671,7 +3689,7 @@ msgstr "compte de décalage négatif"
 
 #: shared-bindings/_pixelmap/PixelMap.c
 msgid "nested index must be int"
-msgstr ""
+msgstr "sous index doit être entier"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no SD card"
@@ -3843,7 +3861,7 @@ msgstr "seul bit_depth = 16 est pris en charge"
 
 #: ports/stm/common-hal/audiobusio/PDMIn.c
 msgid "only mono is supported"
-msgstr ""
+msgstr "seul mono est supporté"
 
 #: extmod/ulab/code/numpy/create.c
 msgid "only ndarrays can be concatenated"
@@ -3851,7 +3869,7 @@ msgstr ""
 
 #: ports/stm/common-hal/audiobusio/PDMIn.c
 msgid "only oversample=64 is supported"
-msgstr ""
+msgstr "seul oversample=64 supporté"
 
 #: ports/nrf/common-hal/audiobusio/PDMIn.c
 #: ports/stm/common-hal/audiobusio/PDMIn.c

locale/hi.po

@@ -28,6 +28,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2391,6 +2399,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/it_IT.po

@@ -31,6 +31,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2416,6 +2424,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/ja.po

@@ -34,6 +34,14 @@ msgstr ""
 "\n"
 "オートリロードでコード実行は中止された。まもなくリロードする。\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2408,6 +2416,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/ko.po

@@ -29,6 +29,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2395,6 +2403,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/nl.po

@@ -28,6 +28,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2418,6 +2426,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/pl.po

@@ -30,6 +30,14 @@ msgid ""
 "Code stopped by auto-reload. Reloading soon.\n"
 msgstr ""
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2399,6 +2407,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-02-20 03:39+0000\n"
+"PO-Revision-Date: 2023-02-23 17:53+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -32,6 +32,18 @@ msgstr ""
 "\n"
 "O código parou pela recarga automática. Recarregando em breve.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+"\n"
+"CIRCUITPY_PYSTACK_SIZE inválido\n"
+"\n"
+"\n"
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2466,7 +2478,11 @@ msgstr "Você pressionou o botão BOOT na inicialização"
 
 #: ports/espressif/boards/adafruit_huzzah32_breakout/mpconfigboard.h
 msgid "You pressed the GPIO0 button at start up."
-msgstr ""
+msgstr "Você pressionou o botão GPIO0 durante a inicialização."
+
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr "Você pressionou o botão Rec durante a inicialização."
 
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."

locale/ru.po

@@ -34,6 +34,14 @@ msgstr ""
 "\n"
 "Программа остановлена автоматической перезагрузкой. Скоро перезагрузка.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2454,6 +2462,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-02-20 03:39+0000\n"
+"PO-Revision-Date: 2023-02-23 17:53+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -32,6 +32,18 @@ msgstr ""
 "\n"
 "Koden stoppades av automatisk laddning. Omladdning sker strax.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+"\n"
+"Ogiltig CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\n"
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2439,7 +2451,11 @@ msgstr "Du tryckte ner BOOT-knappen vid start"
 
 #: ports/espressif/boards/adafruit_huzzah32_breakout/mpconfigboard.h
 msgid "You pressed the GPIO0 button at start up."
-msgstr ""
+msgstr "Du tryckte på GPIO0-knappen vid start."
+
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr "Du tryckte ned Rec-knappen vid start."
 
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."

locale/tr.po

@@ -34,6 +34,14 @@ msgstr ""
 "Program otomatik yeniden yükleme tarafından durduruldu. Birazdan tekrar "
 "yüklenecek.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2413,6 +2421,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

locale/zh_Latn_pinyin.po

@@ -34,6 +34,14 @@ msgstr ""
 "dài mǎ yīn zì dòng chóng xīn jiā zǎi ér tíng zhǐ. jí jiāng chóng xīn jiā "
 "zǎi.\n"
 
+#: main.c
+msgid ""
+"\n"
+"Invalid CIRCUITPY_PYSTACK_SIZE\n"
+"\n"
+"\r"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
@@ -2439,6 +2447,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""

main.c

@@ -122,8 +122,8 @@
 uint8_t value_out = 0;
 #endif
 
-#if MICROPY_ENABLE_PYSTACK
+#if MICROPY_ENABLE_PYSTACK && CIRCUITPY_OS_GETENV
-static size_t PLACE_IN_DTCM_BSS(_pystack[CIRCUITPY_PYSTACK_SIZE / sizeof(size_t)]);
+#include "shared-module/os/__init__.h"
 #endif
 
 static void reset_devices(void) {
@@ -132,7 +132,32 @@ static void reset_devices(void) {
     #endif
 }
 
-STATIC void start_mp(supervisor_allocation *heap) {
+#if MICROPY_ENABLE_PYSTACK
+STATIC supervisor_allocation *allocate_pystack(safe_mode_t safe_mode) {
+    mp_int_t pystack_size = CIRCUITPY_PYSTACK_SIZE;
+    #if CIRCUITPY_OS_GETENV && CIRCUITPY_SETTABLE_PYSTACK
+    // Fetch value if exists from settings.toml
+    // Leaves size to build default on any failure
+    if (safe_mode == SAFE_MODE_NONE || safe_mode == SAFE_MODE_USER) {
+        (void)common_hal_os_getenv_int("CIRCUITPY_PYSTACK_SIZE", &pystack_size);
+        // Check if value is valid
+        pystack_size = pystack_size - pystack_size % sizeof(size_t); // Round down to multiple of 4.
+        if ((pystack_size < 384) || (pystack_size > 900000)) {
+            serial_write_compressed(translate("\nInvalid CIRCUITPY_PYSTACK_SIZE\n\n\r"));
+            pystack_size = CIRCUITPY_PYSTACK_SIZE; // Reset
+        }
+    }
+    #endif
+    supervisor_allocation *pystack = allocate_memory(pystack_size, false, false);
+    if (pystack == NULL) {
+        serial_write_compressed(translate("\nInvalid CIRCUITPY_PYSTACK_SIZE\n\n\r"));
+        pystack = allocate_memory(CIRCUITPY_PYSTACK_SIZE, false, false);
+    }
+    return pystack;
+}
+#endif
+
+STATIC void start_mp(supervisor_allocation *heap, supervisor_allocation *pystack) {
     supervisor_workflow_reset();
 
     // Stack limit should be less than real stack size, so we have a chance
@@ -160,7 +185,7 @@ STATIC void start_mp(supervisor_allocation *heap) {
     readline_init0();
 
     #if MICROPY_ENABLE_PYSTACK
-    mp_pystack_init(_pystack, _pystack + (sizeof(_pystack) / sizeof(size_t)));
+    mp_pystack_init(pystack->ptr, pystack->ptr + get_allocation_length(pystack) / sizeof(size_t));
     #endif
 
     #if MICROPY_ENABLE_GC
@@ -264,7 +289,7 @@ STATIC void count_strn(void *data, const char *str, size_t len) {
     *(size_t *)data += len;
 }
 
-STATIC void cleanup_after_vm(supervisor_allocation *heap, mp_obj_t exception) {
+STATIC void cleanup_after_vm(supervisor_allocation *heap, supervisor_allocation *pystack, mp_obj_t exception) {
     // Get the traceback of any exception from this run off the heap.
     // MP_OBJ_SENTINEL means "this run does not contribute to traceback storage, don't touch it"
     // MP_OBJ_NULL (=0) means "this run completed successfully, clear any stored traceback"
@@ -345,6 +370,9 @@ STATIC void cleanup_after_vm(supervisor_allocation *heap, mp_obj_t exception) {
     filesystem_flush();
     stop_mp();
     free_memory(heap);
+    #if MICROPY_ENABLE_PYSTACK
+    free_memory(pystack);
+    #endif
     supervisor_move_memory();
 
     // Let the workflows know we've reset in case they want to restart.
@@ -399,10 +427,12 @@ STATIC bool run_code_py(safe_mode_t safe_mode, bool *simulate_reset) {
         };
         #endif
 
+        supervisor_allocation *pystack = NULL;
+        #if MICROPY_ENABLE_PYSTACK
+        pystack = allocate_pystack(safe_mode);
+        #endif
         supervisor_allocation *heap = allocate_remaining_memory();
-
+        start_mp(heap, pystack);
-        // Prepare the VM state.
-        start_mp(heap);
 
         #if CIRCUITPY_USB
         usb_setup_with_vm();
@@ -450,7 +480,7 @@ STATIC bool run_code_py(safe_mode_t safe_mode, bool *simulate_reset) {
 
 
         // Finished executing python code. Cleanup includes filesystem flush and a board reset.
-        cleanup_after_vm(heap, _exec_result.exception);
+        cleanup_after_vm(heap, pystack, _exec_result.exception);
         _exec_result.exception = NULL;
 
         // If a new next code file was set, that is a reason to keep it (obviously). Stuff this into
@@ -739,8 +769,12 @@ STATIC void __attribute__ ((noinline)) run_safemode_py(safe_mode_t safe_mode) {
         return;
     }
 
+    supervisor_allocation *pystack = NULL;
+    #if MICROPY_ENABLE_PYSTACK
+    pystack = allocate_pystack(safe_mode);
+    #endif
     supervisor_allocation *heap = allocate_remaining_memory();
-    start_mp(heap);
+    start_mp(heap, pystack);
 
     static const char *const safemode_py_filenames[] = {"safemode.py", "safemode.txt"};
     maybe_run_list(safemode_py_filenames, MP_ARRAY_SIZE(safemode_py_filenames));
@@ -751,7 +785,7 @@ STATIC void __attribute__ ((noinline)) run_safemode_py(safe_mode_t safe_mode) {
         set_safe_mode(SAFE_MODE_SAFEMODE_PY_ERROR);
     }
 
-    cleanup_after_vm(heap, _exec_result.exception);
+    cleanup_after_vm(heap, pystack, _exec_result.exception);
     _exec_result.exception = NULL;
 }
 #endif
@@ -772,9 +806,12 @@ STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
 
     // Do USB setup even if boot.py is not run.
 
+    supervisor_allocation *pystack = NULL;
+    #if MICROPY_ENABLE_PYSTACK
+    pystack = allocate_pystack(safe_mode);
+    #endif
     supervisor_allocation *heap = allocate_remaining_memory();
-
+    start_mp(heap, pystack);
-    start_mp(heap);
 
     #if CIRCUITPY_USB
     // Set up default USB values after boot.py VM starts but before running boot.py.
@@ -860,7 +897,7 @@ STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
 
     port_post_boot_py(true);
 
-    cleanup_after_vm(heap, _exec_result.exception);
+    cleanup_after_vm(heap, pystack, _exec_result.exception);
     _exec_result.exception = NULL;
 
     port_post_boot_py(false);
@@ -871,12 +908,16 @@ STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
     #endif
 }
 
-STATIC int run_repl(void) {
+STATIC int run_repl(safe_mode_t safe_mode) {
     int exit_code = PYEXEC_FORCED_EXIT;
     stack_resize();
     filesystem_flush();
+    supervisor_allocation *pystack = NULL;
+    #if MICROPY_ENABLE_PYSTACK
+    pystack = allocate_pystack(safe_mode);
+    #endif
     supervisor_allocation *heap = allocate_remaining_memory();
-    start_mp(heap);
+    start_mp(heap, pystack);
 
     #if CIRCUITPY_USB
     usb_setup_with_vm();
@@ -919,7 +960,7 @@ STATIC int run_repl(void) {
         exit_code = PYEXEC_DEEP_SLEEP;
     }
     #endif
-    cleanup_after_vm(heap, MP_OBJ_SENTINEL);
+    cleanup_after_vm(heap, pystack, MP_OBJ_SENTINEL);
 
     // Also reset bleio. The above call omits it in case workflows should continue. In this case,
     // we're switching straight to another VM so we want to reset.
@@ -938,6 +979,7 @@ STATIC int run_repl(void) {
 }
 
 int __attribute__((used)) main(void) {
+
     // initialise the cpu and peripherals
     set_safe_mode(port_init());
 
@@ -1038,7 +1080,7 @@ int __attribute__((used)) main(void) {
     bool simulate_reset = true;
     for (;;) {
         if (!skip_repl) {
-            exit_code = run_repl();
+            exit_code = run_repl(get_safe_mode());
             supervisor_set_run_reason(RUN_REASON_REPL_RELOAD);
         }
         if (exit_code == PYEXEC_FORCED_EXIT) {

ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk

@@ -20,11 +20,13 @@ CIRCUITPY_BLEIO_HCI = 0
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_FLOPPYIO = 0
 CIRCUITPY_FRAMEBUFFERIO = 0
+CIRCUITPY_PIXELMAP = 0
 CIRCUITPY_GETPASS = 0
 CIRCUITPY_KEYPAD = 0
 CIRCUITPY_MSGPACK = 0
 CIRCUITPY_PS2IO = 0
 CIRCUITPY_RGBMATRIX = 0
+CIRCUITPY_RAINBOWIO = 0
 CIRCUITPY_ROTARYIO = 0
 CIRCUITPY_TOUCHIO = 0
 CIRCUITPY_USB_HID = 0

ports/broadcom/common-hal/busio/I2C.c

@@ -98,7 +98,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
     self->sda_pin = sda;
     self->scl_pin = scl;
 
-    uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+    uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
     uint16_t clock_divider = source_clock / frequency;
     self->peripheral->DIV_b.CDIV = clock_divider;
 

ports/broadcom/common-hal/busio/SPI.c

@@ -87,6 +87,8 @@ void common_hal_busio_spi_construct(busio_spi_obj_t *self,
         mp_raise_NotImplementedError(translate("Half duplex SPI is not implemented"));
     }
 
+    // BCM_VERSION != 2711 have 3 SPI but as listed in peripherals/gen/pins.c two are on
+    // index 0, once one index 0 SPI is found the other will throw an invalid_pins error.
     for (size_t i = 0; i < NUM_SPI; i++) {
         if (spi_in_use[i]) {
             continue;
@@ -157,6 +159,7 @@ void common_hal_busio_spi_deinit(busio_spi_obj_t *self) {
     common_hal_reset_pin(self->MOSI);
     common_hal_reset_pin(self->MISO);
     self->clock = NULL;
+    spi_in_use[self->index] = false;
 
     if (self->index == 1 ||
         self->index == 2) {
@@ -180,7 +183,7 @@ bool common_hal_busio_spi_configure(busio_spi_obj_t *self,
 
     if (self->index == 1 || self->index == 2) {
         SPI1_Type *p = aux_spi[self->index];
-        uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+        uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
         uint16_t clock_divider = source_clock / baudrate;
         if (source_clock % baudrate > 0) {
             clock_divider += 2;
@@ -198,7 +201,7 @@ bool common_hal_busio_spi_configure(busio_spi_obj_t *self,
         SPI0_Type *p = spi[self->index];
         p->CS = polarity << SPI0_CS_CPOL_Pos |
             phase << SPI0_CS_CPHA_Pos;
-        uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+        uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
         uint16_t clock_divider = source_clock / baudrate;
         if (source_clock % baudrate > 0) {
             clock_divider += 2;

ports/broadcom/common-hal/busio/UART.c

@@ -124,7 +124,7 @@ void pl011_IRQHandler(uint8_t index) {
     // Clear the interrupt in case we weren't able to clear it by emptying the
     // FIFO. (This won't clear the FIFO.)
     ARM_UART_PL011_Type *pl011 = uart[index];
-    pl011->ICR = UART0_ICR_RXIC_Msk;
+    pl011->ICR = ARM_UART_PL011_ICR_RXIC_Msk;
 }
 
 void UART0_IRQHandler(void) {
@@ -258,31 +258,31 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
 
         common_hal_busio_uart_set_baudrate(self, baudrate);
 
-        uint32_t line_control = UART0_LCR_H_FEN_Msk;
+        uint32_t line_control = ARM_UART_PL011_LCR_H_FEN_Msk;
-        line_control |= (bits - 5) << UART0_LCR_H_WLEN_Pos;
+        line_control |= (bits - 5) << ARM_UART_PL011_LCR_H_WLEN_Pos;
         if (stop == 2) {
-            line_control |= UART0_LCR_H_STP2_Msk;
+            line_control |= ARM_UART_PL011_LCR_H_STP2_Msk;
         }
         if (parity != BUSIO_UART_PARITY_NONE) {
-            line_control |= UART0_LCR_H_PEN_Msk;
+            line_control |= ARM_UART_PL011_LCR_H_PEN_Msk;
         }
         if (parity == BUSIO_UART_PARITY_EVEN) {
-            line_control |= UART0_LCR_H_EPS_Msk;
+            line_control |= ARM_UART_PL011_LCR_H_EPS_Msk;
         }
         pl011->LCR_H = line_control;
 
-        uint32_t control = UART0_CR_UARTEN_Msk;
+        uint32_t control = ARM_UART_PL011_CR_UARTEN_Msk;
         if (tx != NULL) {
-            control |= UART0_CR_TXE_Msk;
+            control |= ARM_UART_PL011_CR_TXE_Msk;
         }
         if (rx != NULL) {
-            control |= UART0_CR_RXE_Msk;
+            control |= ARM_UART_PL011_CR_RXE_Msk;
         }
         if (cts != NULL) {
-            control |= UART0_CR_CTSEN_Msk;
+            control |= ARM_UART_PL011_CR_CTSEN_Msk;
         }
         if (rts != NULL) {
-            control |= UART0_CR_RTSEN_Msk;
+            control |= ARM_UART_PL011_CR_RTSEN_Msk;
         }
         pl011->CR = control;
     }
@@ -460,7 +460,7 @@ uint32_t common_hal_busio_uart_get_baudrate(busio_uart_obj_t *self) {
 
 void common_hal_busio_uart_set_baudrate(busio_uart_obj_t *self, uint32_t baudrate) {
     if (self->uart_id == 1) {
-        uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+        uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
         UART1->BAUD = ((source_clock / (baudrate * 8)) - 1);
     } else {
         ARM_UART_PL011_Type *pl011 = uart[self->uart_id];

ports/broadcom/common-hal/sdioio/SDCard.c

@@ -122,27 +122,27 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
         if (EMMC->STATUS_b.DAT_INHIBIT) {
             return SDMMC_ERR_BUSY;
         }
-        cmd_flags = EMMC_CMDTM_TM_BLKCNT_EN_Msk | EMMC_CMDTM_CMD_ISDATA_Msk;
+        cmd_flags = Arasan_EMMC_Distributor_CMDTM_TM_BLKCNT_EN_Msk | Arasan_EMMC_Distributor_CMDTM_CMD_ISDATA_Msk;
         if (cmdinfo->datalen > cmdinfo->blklen) {
-            cmd_flags |= EMMC_CMDTM_TM_MULTI_BLOCK_Msk;
+            cmd_flags |= Arasan_EMMC_Distributor_CMDTM_TM_MULTI_BLOCK_Msk;
             if ((cmdinfo->flags & SCF_AUTO_STOP) != 0) {
-                cmd_flags |= 1 << EMMC_CMDTM_TM_AUTO_CMD_EN_Pos;
+                cmd_flags |= 1 << Arasan_EMMC_Distributor_CMDTM_TM_AUTO_CMD_EN_Pos;
             }
         }
         if (read) {
-            cmd_flags |= EMMC_CMDTM_TM_DAT_DIR_Msk;
+            cmd_flags |= Arasan_EMMC_Distributor_CMDTM_TM_DAT_DIR_Msk;
         }
-        EMMC->BLKSIZECNT = (cmdinfo->datalen / cmdinfo->blklen) << EMMC_BLKSIZECNT_BLKCNT_Pos |
+        EMMC->BLKSIZECNT = (cmdinfo->datalen / cmdinfo->blklen) << Arasan_EMMC_Distributor_BLKSIZECNT_BLKCNT_Pos |
-            cmdinfo->blklen << EMMC_BLKSIZECNT_BLKSIZE_Pos;
+            cmdinfo->blklen << Arasan_EMMC_Distributor_BLKSIZECNT_BLKSIZE_Pos;
     }
 
     uint32_t response_type = EMMC_CMDTM_CMD_RSPNS_TYPE_RESPONSE_48BITS;
     uint32_t crc = 0;
     if ((cmdinfo->flags & SCF_RSP_CRC) != 0) {
-        crc |= EMMC_CMDTM_CMD_CRCCHK_EN_Msk;
+        crc |= Arasan_EMMC_Distributor_CMDTM_CMD_CRCCHK_EN_Msk;
     }
     if ((cmdinfo->flags & SCF_RSP_IDX) != 0) {
-        crc |= EMMC_CMDTM_CMD_IXCHK_EN_Msk;
+        crc |= Arasan_EMMC_Distributor_CMDTM_CMD_IXCHK_EN_Msk;
     }
     if ((cmdinfo->flags & SCF_RSP_136) != 0) {
         response_type = EMMC_CMDTM_CMD_RSPNS_TYPE_RESPONSE_136BITS;
@@ -152,8 +152,8 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
         response_type = EMMC_CMDTM_CMD_RSPNS_TYPE_RESPONSE_NONE;
     }
     uint32_t full_cmd = cmd_flags | crc |
-        cmdinfo->opcode << EMMC_CMDTM_CMD_INDEX_Pos |
+        cmdinfo->opcode << Arasan_EMMC_Distributor_CMDTM_CMD_INDEX_Pos |
-        response_type << EMMC_CMDTM_CMD_RSPNS_TYPE_Pos;
+        response_type << Arasan_EMMC_Distributor_CMDTM_CMD_RSPNS_TYPE_Pos;
     EMMC->CMDTM = full_cmd;
 
     // Wait for an interrupt to indicate completion of the command.
@@ -170,7 +170,7 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
         }
         return SDMMC_ERR_TIMEOUT;
     } else {
-        EMMC->INTERRUPT = EMMC_INTERRUPT_CMD_DONE_Msk;
+        EMMC->INTERRUPT = Arasan_EMMC_Distributor_INTERRUPT_CMD_DONE_Msk;
     }
 
     // Transfer the data.
@@ -197,7 +197,7 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
                 EMMC->DATA = ((uint32_t *)cmdinfo->data)[i];
             }
         }
-        uint32_t data_done_mask = EMMC_INTERRUPT_ERR_Msk | EMMC_INTERRUPT_DATA_DONE_Msk;
+        uint32_t data_done_mask = Arasan_EMMC_Distributor_INTERRUPT_ERR_Msk | Arasan_EMMC_Distributor_INTERRUPT_DATA_DONE_Msk;
         start_ticks = port_get_raw_ticks(NULL);
         while ((EMMC->INTERRUPT & data_done_mask) == 0 && (port_get_raw_ticks(NULL) - start_ticks) < (size_t)cmdinfo->timeout_ms) {
         }
@@ -282,7 +282,7 @@ void common_hal_sdioio_sdcard_construct(sdioio_sdcard_obj_t *self,
 
     }
     // Set max timeout
-    EMMC->CONTROL1 |= EMMC_CONTROL1_CLK_INTLEN_Msk | (0xe << EMMC_CONTROL1_DATA_TOUNIT_Pos);
+    EMMC->CONTROL1 |= Arasan_EMMC_Distributor_CONTROL1_CLK_INTLEN_Msk | (0xe << Arasan_EMMC_Distributor_CONTROL1_DATA_TOUNIT_Pos);
 
     EMMC->IRPT_MASK = 0xffffffff;
 

ports/broadcom/peripherals

@@ -1 +1 @@
-Subproject commit 08370086080759ed54ac1136d62d2ad24c6fa267
+Subproject commit d3a6b50a21e7dd49ba4bfa0374da3407594caa50

ports/espressif/boards/espressif_esp32_lyrat/board.c

@@ -0,0 +1,34 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Radio Sound, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "components/driver/include/driver/gpio.h"
+#include "components/hal/include/hal/gpio_hal.h"
+#include "common-hal/microcontroller/Pin.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h

@@ -0,0 +1,50 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Radio Sound, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Espressif ESP32-LyraT"
+#define MICROPY_HW_MCU_NAME         "ESP32"
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO22)
+
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO23, .sda = &pin_GPIO18}}
+
+#define CIRCUITPY_BOARD_SPI         (1)
+#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO14, .mosi = &pin_GPIO13, .miso = &pin_GPIO12}}
+
+#define CIRCUITPY_BOARD_UART        (0)
+
+// For entering safe mode, use Rec button
+#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO36)
+
+// Explanation of how a user got into safe mode
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the Rec button at start up.")
+
+// UART pins attached to the USB-serial converter chip
+#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
+#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)

ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.mk

@@ -0,0 +1,10 @@
+CIRCUITPY_CREATOR_ID =  0x000C303A
+CIRCUITPY_CREATION_ID = 0x0032A000
+
+IDF_TARGET = esp32
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 40m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+
+CIRCUITPY_ESPCAMERA = 0

ports/espressif/boards/espressif_esp32_lyrat/pins.c

@@ -0,0 +1,56 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // External pins are in silkscreen order, from top to bottom, left side, then right side
+    { MP_ROM_QSTR(MP_QSTR_CS0), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO23) },
+    { MP_ROM_QSTR(MP_QSTR_D23), MP_ROM_PTR(&pin_GPIO23) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO25) },
+
+    { MP_ROM_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_GPIO26) },
+
+    { MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO22) },
+    { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_GPIO22) },
+    { MP_ROM_QSTR(MP_QSTR_D22), MP_ROM_PTR(&pin_GPIO22) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_REC), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_SW36), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_MODE), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_SW39), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/espressif_esp32_lyrat/sdkconfig

@@ -0,0 +1,37 @@
+CONFIG_ESP32_SPIRAM_SUPPORT=y
+# SPI RAM config
+#
+CONFIG_SPIRAM_TYPE_AUTO=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
+CONFIG_SPIRAM_SIZE=4194304
+CONFIG_SPIRAM_SPEED_40M=y
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+CONFIG_SPIRAM_IGNORE_NOTFOUND=y
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
+CONFIG_SPIRAM_CACHE_WORKAROUND=y
+
+# Uncomment (remove ###) to send ESP_LOG  output to TX/RX pins
+### #
+### # ESP System Settings
+### #
+### CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y
+### # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+### CONFIG_ESP_CONSOLE_UART_CUSTOM=y
+### # CONFIG_ESP_CONSOLE_NONE is not set
+### CONFIG_ESP_CONSOLE_UART=y
+### CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_0=y
+### # CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_1 is not set
+### CONFIG_ESP_CONSOLE_UART_NUM=0
+### CONFIG_ESP_CONSOLE_UART_TX_GPIO=8
+### CONFIG_ESP_CONSOLE_UART_RX_GPIO=7
+### CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+### # CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
+### # end of ESP System Settings

ports/raspberrypi/common-hal/socketpool/Socket.c

@@ -1109,7 +1109,7 @@ int socketpool_socket_recv_into(socketpool_socket_obj_t *socket,
             break;
     }
     if (ret == (unsigned)-1) {
-        return -_errno;
+        mp_raise_OSError(_errno);
     }
     return ret;
 }

py/circuitpy_mpconfig.h

@@ -145,6 +145,7 @@ extern void common_hal_mcu_enable_interrupts(void);
 #define MICROPY_REPL_AUTO_INDENT         (1)
 #define MICROPY_REPL_EVENT_DRIVEN        (0)
 #define MICROPY_ENABLE_PYSTACK           (1)
+#define CIRCUITPY_SETTABLE_PYSTACK       (1)
 #define MICROPY_STACK_CHECK              (1)
 #define MICROPY_STREAMS_NON_BLOCK        (1)
 #ifndef MICROPY_USE_INTERNAL_PRINTF

tools/ci_changes_per_commit.py

@@ -166,26 +166,14 @@ def get_commit_depth_and_check_suite(query_commits):
             return [None, None]
 
 
-def append_runs_to_list(runs, bad_runs_by_matrix):
-    regex_matrix = re.compile("^build-[^ ]+")
-    regex_board = re.compile("\([^ ]+\)$")
-    for run in runs["nodes"]:
-        name = run["name"]
-        res_matrix = regex_matrix.search(name)
-        if res_matrix:
-            matrix = res_matrix.group()
-            if matrix not in bad_runs_by_matrix:
-                bad_runs_by_matrix[matrix] = []
-            res_board = regex_board.search(name)
-            if res_board:
-                bad_runs_by_matrix[matrix].append(res_board.group()[1:-1])
-
-
 def get_bad_check_runs(query_check_runs):
     more_pages = True
     bad_runs_by_matrix = {}
+
     run_types = ["failed", "incomplete"]
 
+    regex_matrix = re.compile(r"^\S+ \/ (build|run) \(\S+\)$")
+
     while more_pages:
         check_runs = query_check_runs.fetch()["data"]["node"]
         more_pages = False
@@ -194,7 +182,17 @@ def get_bad_check_runs(query_check_runs):
             run_type_camel = run_type.capitalize() + "Run"
             run_type = run_type + "Runs"
 
-            append_runs_to_list(check_runs[run_type], bad_runs_by_matrix)
+            for check_run in check_runs[run_type]["nodes"]:
+                name = check_run["name"]
+                res_matrix = regex_matrix.search(name)
+                if res_matrix:
+                    matrix = name.split(" /", 1)[0]
+                    matrix_job = name.split(" (", 1)[1][:-1]
+                    bad_runs_by_matrix.setdefault(matrix, []).append(matrix_job)
+                elif name != "scheduler":
+                    bad_runs_by_matrix[name] = True
+                else:
+                    return {}
 
             if query_check_runs.paginate(
                 check_runs[run_type]["pageInfo"], "after" + run_type_camel

tools/ci_fetch_deps.py

@@ -80,14 +80,16 @@ def main():
         submodules = ["extmod/ulab", "lib/", "tools/"]
     elif TARGET == "build-doc":
         # used in .readthedocs.yml to generate RTD
-        submodules = ["extmod/ulab", "frozen/"]
+        submodules = ["extmod/ulab"]
+        submodules_tags = ["frozen/"]
     elif TARGET == "mpy-cross" or TARGET == "mpy-cross-mac":
         submodules = ["tools/"]  # for huffman
-    elif TARGET == "windows":
+    elif TARGET == "build-windows":
         # This builds one board from a number of ports so fill out a bunch of submodules
         submodules = ["extmod/ulab", "lib/", "tools/", "ports/", "data/nvm.toml"]
     elif TARGET == "website":
-        submodules = ["tools/adabot/", "frozen/"]
+        submodules = ["tools/adabot/"]
+        submodules_tags = ["frozen/"]
     elif TARGET == "pre-commit":
         submodules = ["extmod/ulab"]
     else:

tools/ci_set_matrix.py

@@ -42,15 +42,15 @@ from shared_bindings_matrix import (
     all_ports_all_boards,
 )
 
-PORT_TO_BUILD_JOB = {
+PORT_TO_ARCH = {
-    "atmel-samd": "arm",
+    "atmel-samd": "atmel",
     "broadcom": "aarch",
     "cxd56": "arm",
     "espressif": "esp",
     "litex": "riscv",
     "mimxrt10xx": "arm",
-    "nrf": "nrf",
+    "nrf": "arm",
-    "raspberrypi": "rpi",
+    "raspberrypi": "arm",
     "stm": "arm",
 }
 
@@ -62,6 +62,24 @@ IGNORE = [
 # Files in these directories never influence board builds
 IGNORE_DIRS = ["tests", "docs", ".devcontainer"]
 
+PATTERN_DOCS = (
+    r"^(?:\.github|docs|extmod\/ulab)|"
+    r"^(?:(?:ports\/\w+\/bindings|shared-bindings)\S+\.c|tools\/extract_pyi\.py|conf\.py|requirements-doc\.txt)$|"
+    r"(?:-stubs|\.(?:md|MD|rst|RST))$"
+)
+
+PATTERN_WINDOWS = [
+    ".github/",
+    "extmod/",
+    "lib/",
+    "mpy-cross/",
+    "ports/unix/",
+    "ports/windows/",
+    "py/",
+    "requirements",
+    "tools/",
+]
+
 if len(sys.argv) > 1:
     print("Using files list on commandline")
     changed_files = sys.argv[1:]
@@ -92,6 +110,9 @@ def set_output(name: str, value):
 
 
 def set_boards_to_build(build_all: bool):
+    if last_failed_jobs.get("mpy_cross") or last_failed_jobs.get("tests"):
+        build_all = True
+
     # Get boards in json format
     boards_info_json = build_board_info.get_board_mapping()
     all_board_ids = set()
@@ -203,14 +224,13 @@ def set_boards_to_build(build_all: bool):
             boards_to_build = all_board_ids
             break
 
-    # Split boards by build job.
+    # Split boards by architecture.
-    build_job_to_boards = {"aarch": [], "arm": [], "esp": [], "nrf": [], "riscv": [], "rpi": []}
+    arch_to_boards = {"aarch": [], "arm": [], "atmel": [], "esp": [], "riscv": []}
 
     # Append previously failed boards
-    for build_job in build_job_to_boards:
+    for arch in arch_to_boards:
-        job_name = f"build-{build_job}"
+        if arch in last_failed_jobs:
-        if job_name in last_failed_jobs:
+            for board in last_failed_jobs[arch]:
-            for board in last_failed_jobs[job_name]:
                 if not board in boards_to_build:
                     boards_to_build.append(board)
 
@@ -225,34 +245,32 @@ def set_boards_to_build(build_all: bool):
         # if this happens it's not in `board_to_port`.
         if not port:
             continue
-        build_job_to_boards[PORT_TO_BUILD_JOB[port]].append(board)
+        arch_to_boards[PORT_TO_ARCH[port]].append(board)
         print(" ", board)
 
     # Set the step outputs for each architecture
-    for build_job in build_job_to_boards:
+    for arch in arch_to_boards:
-        set_output(f"boards-{build_job}", json.dumps(build_job_to_boards[build_job]))
+        set_output(f"boards-{arch}", json.dumps(arch_to_boards[arch]))
 
 
 def set_docs_to_build(build_doc: bool):
     if not build_doc:
-        if "build-doc" in last_failed_jobs:
+        if last_failed_jobs.get("build-doc"):
             build_doc = True
         else:
-            doc_pattern = re.compile(
+            doc_pattern = re.compile(PATTERN_DOCS)
-                r"^(?:\.github\/workflows\/|docs|extmod\/ulab|(?:(?:ports\/\w+\/bindings|shared-bindings)\S+\.c|conf\.py|tools\/extract_pyi\.py|requirements-doc\.txt)$)|(?:-stubs|\.(?:md|MD|rst|RST))$"
-            )
             github_workspace = os.environ.get("GITHUB_WORKSPACE") or ""
             github_workspace = github_workspace and github_workspace + "/"
-            for p in changed_files:
+            for file in changed_files:
-                if doc_pattern.search(p) and (
+                if doc_pattern.search(file) and (
                     (
                         subprocess.run(
-                            f"git diff -U0 $BASE_SHA...$HEAD_SHA {github_workspace + p} | grep -o -m 1 '^[+-]\/\/|'",
+                            f"git diff -U0 $BASE_SHA...$HEAD_SHA {github_workspace + file} | grep -o -m 1 '^[+-]\/\/|'",
                             capture_output=True,
                             shell=True,
                         ).stdout
                     )
-                    if p.endswith(".c")
+                    if file.endswith(".c")
                     else True
                 ):
                     build_doc = True
@@ -263,6 +281,25 @@ def set_docs_to_build(build_doc: bool):
     set_output("build-doc", build_doc)
 
 
+def set_windows_to_build(build_windows):
+    if not build_windows:
+        if last_failed_jobs.get("build-windows"):
+            build_windows = True
+        else:
+            for file in changed_files:
+                for pattern in PATTERN_WINDOWS:
+                    if file.startswith(pattern):
+                        build_windows = True
+                        break
+                else:
+                    continue
+                break
+
+    # Set the step outputs
+    print("Building windows:", build_windows)
+    set_output("build-windows", build_windows)
+
+
 def check_changed_files():
     if not changed_files:
         print("Building all docs/boards")
@@ -275,6 +312,7 @@ def check_changed_files():
 def main():
     build_all = check_changed_files()
     set_docs_to_build(build_all)
+    set_windows_to_build(build_all)
     set_boards_to_build(build_all)