djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add initial thunderpack port files.

Browse Source
This commit is contained in:
jgillick 2020-03-14 00:03:14 -07:00
parent 3a5f79acef
commit 6f153804da
13 changed files with 2147 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

189
ports/stm/boards/STM32F412CGUx_FLASH.ld Normal file
View File

@ -0,0 +1,189 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
** Author : Auto-generated by System Workbench for STM32
**
** Abstract : Linker script for STM32F412CGUx series
** 1024Kbytes FLASH and 256Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed “as is,” without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of STMicroelectronics nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20040000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

521
ports/stm/boards/startup_stm32f412cx_thunderpack.s Normal file
View File

@ -0,0 +1,521 @@
/**
******************************************************************************
* @file startup_stm32f412Cx.s
* @author MCD Application Team
* @brief STM32F412Cx Devices vector table for GCC based toolchains.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
/* bl __libc_init_array */
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word CAN1_TX_IRQHandler /* CAN1 TX */
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word 0 /* Reserved */
.word SDIO_IRQHandler /* SDIO */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word TIM6_IRQHandler /* TIM6 */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word DFSDM1_FLT0_IRQHandler /* DFSDM1 Filter0 */
.word DFSDM1_FLT1_IRQHandler /* DFSDM1 Filter1 */
.word CAN2_TX_IRQHandler /* CAN2 TX */
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
.word OTG_FS_IRQHandler /* USB OTG FS */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word RNG_IRQHandler /* RNG */
.word FPU_IRQHandler /* FPU */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word FMPI2C1_EV_IRQHandler /* FMPI2C1 Event */
.word FMPI2C1_ER_IRQHandler /* FMPI2C1 Error */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM9_IRQHandler
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
.weak TIM1_UP_TIM10_IRQHandler
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM11_IRQHandler
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak OTG_FS_WKUP_IRQHandler
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak CAN2_TX_IRQHandler
.thumb_set CAN2_TX_IRQHandler,Default_Handler
.weak CAN2_RX0_IRQHandler
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
.weak CAN2_RX1_IRQHandler
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
.weak CAN2_SCE_IRQHandler
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak FMPI2C1_EV_IRQHandler
.thumb_set FMPI2C1_EV_IRQHandler,Default_Handler
.weak FMPI2C1_ER_IRQHandler
.thumb_set FMPI2C1_ER_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

38
ports/stm/boards/thunderpack/board.c Normal file
View File

@ -0,0 +1,38 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
void board_init(void) {
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

37
ports/stm/boards/thunderpack/mpconfigboard.h Normal file
View File

@ -0,0 +1,37 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
//Micropython setup
#define MICROPY_HW_BOARD_NAME "THUNDERPACK"
#define MICROPY_HW_MCU_NAME "STM32F412xGU"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (0x4000)
#define BOARD_OSC_DIV (24)
#define BOARD_NO_VBUS_SENSE (1)
#define DEFAULT_I2C_BUS_SCL (&pin_PB06)
#define DEFAULT_I2C_BUS_SDA (&pin_PB07)

22
ports/stm/boards/thunderpack/mpconfigboard.mk Normal file
View File

@ -0,0 +1,22 @@
USB_VID = 0x0483
USB_PID = 0xdf11
USB_PRODUCT = "Thunderpack"
USB_MANUFACTURER = "Jeremy Gillick"
USB_DEVICES = "CDC,MSC,HID"
INTERNAL_FLASH_FILESYSTEM = 1
LONGINT_IMPL = NONE
# QSPI_FLASH_FILESYSTEM = 1
# EXTERNAL_FLASH_DEVICE_COUNT = 1
# EXTERNAL_FLASH_DEVICES = N25Q128A
# LONGINT_IMPL = MPZ
MCU_SERIES = m4
MCU_VARIANT = stm32f4
MCU_SUB_VARIANT = stm32f412cx_thunderpack
MCU_PACKAGE = 48
CMSIS_MCU = STM32F412Zx
LD_FILE = boards/STM32F412CGUx_FLASH.ld

95
ports/stm/boards/thunderpack/pins.c Normal file
View File

@ -0,0 +1,95 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
// { MP_ROM_QSTR(MP_QSTR_PE02), MP_ROM_PTR(&pin_PE02) },
// { MP_ROM_QSTR(MP_QSTR_PE03), MP_ROM_PTR(&pin_PE03) },
// { MP_ROM_QSTR(MP_QSTR_PE04), MP_ROM_PTR(&pin_PE04) },
// { MP_ROM_QSTR(MP_QSTR_PE05), MP_ROM_PTR(&pin_PE05) },
// { MP_ROM_QSTR(MP_QSTR_PE06), MP_ROM_PTR(&pin_PE06) },
// { MP_ROM_QSTR(MP_QSTR_PC13), MP_ROM_PTR(&pin_PC13) },
// { MP_ROM_QSTR(MP_QSTR_PF02), MP_ROM_PTR(&pin_PF02) },
// { MP_ROM_QSTR(MP_QSTR_PF03), MP_ROM_PTR(&pin_PF03) },
// { MP_ROM_QSTR(MP_QSTR_PF10), MP_ROM_PTR(&pin_PF10) },
// { MP_ROM_QSTR(MP_QSTR_PC00), MP_ROM_PTR(&pin_PC00) },
// { MP_ROM_QSTR(MP_QSTR_PC01), MP_ROM_PTR(&pin_PC01) },
// { MP_ROM_QSTR(MP_QSTR_PC02), MP_ROM_PTR(&pin_PC02) },
// { MP_ROM_QSTR(MP_QSTR_PC03), MP_ROM_PTR(&pin_PC03) },
{ MP_ROM_QSTR(MP_QSTR_PA01), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_PA02), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_PA03), MP_ROM_PTR(&pin_PA03) },
{ MP_ROM_QSTR(MP_QSTR_PA04), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_PA05), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_PA06), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_PA07), MP_ROM_PTR(&pin_PA07) },
// { MP_ROM_QSTR(MP_QSTR_PC04), MP_ROM_PTR(&pin_PC04) },
// { MP_ROM_QSTR(MP_QSTR_PC05), MP_ROM_PTR(&pin_PC05) },
// { MP_ROM_QSTR(MP_QSTR_PB00), MP_ROM_PTR(&pin_PB00) },
// { MP_ROM_QSTR(MP_QSTR_PB01), MP_ROM_PTR(&pin_PB01) },
// { MP_ROM_QSTR(MP_QSTR_PF11), MP_ROM_PTR(&pin_PF11) },
// { MP_ROM_QSTR(MP_QSTR_PF13), MP_ROM_PTR(&pin_PF13) },
// { MP_ROM_QSTR(MP_QSTR_PB10), MP_ROM_PTR(&pin_PB10) },
// { MP_ROM_QSTR(MP_QSTR_PB11), MP_ROM_PTR(&pin_PB11) },
// { MP_ROM_QSTR(MP_QSTR_PB12), MP_ROM_PTR(&pin_PB12) },
// { MP_ROM_QSTR(MP_QSTR_PB13), MP_ROM_PTR(&pin_PB13) },
// { MP_ROM_QSTR(MP_QSTR_PB14), MP_ROM_PTR(&pin_PB14) },
// { MP_ROM_QSTR(MP_QSTR_PB15), MP_ROM_PTR(&pin_PB15) },
// { MP_ROM_QSTR(MP_QSTR_PD12), MP_ROM_PTR(&pin_PD12) },
// { MP_ROM_QSTR(MP_QSTR_PD13), MP_ROM_PTR(&pin_PD13) },
// { MP_ROM_QSTR(MP_QSTR_PG02), MP_ROM_PTR(&pin_PG02) },
// { MP_ROM_QSTR(MP_QSTR_PC06), MP_ROM_PTR(&pin_PC06) },
// { MP_ROM_QSTR(MP_QSTR_PC07), MP_ROM_PTR(&pin_PC07) },
// { MP_ROM_QSTR(MP_QSTR_PC09), MP_ROM_PTR(&pin_PC09) },
{ MP_ROM_QSTR(MP_QSTR_PA08), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_PA10), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_PA13), MP_ROM_PTR(&pin_PA13) },
{ MP_ROM_QSTR(MP_QSTR_PA14), MP_ROM_PTR(&pin_PA14) },
// { MP_ROM_QSTR(MP_QSTR_PA15), MP_ROM_PTR(&pin_PA15) },
// { MP_ROM_QSTR(MP_QSTR_PD06), MP_ROM_PTR(&pin_PD06) },
// { MP_ROM_QSTR(MP_QSTR_PG09), MP_ROM_PTR(&pin_PG09) },
// { MP_ROM_QSTR(MP_QSTR_PG10), MP_ROM_PTR(&pin_PG10) },
// { MP_ROM_QSTR(MP_QSTR_PG11), MP_ROM_PTR(&pin_PG11) },
// { MP_ROM_QSTR(MP_QSTR_PG12), MP_ROM_PTR(&pin_PG12) },
// { MP_ROM_QSTR(MP_QSTR_PG13), MP_ROM_PTR(&pin_PG13) },
// { MP_ROM_QSTR(MP_QSTR_PG14), MP_ROM_PTR(&pin_PG14) },
// { MP_ROM_QSTR(MP_QSTR_PB03), MP_ROM_PTR(&pin_PB03) },
{ MP_ROM_QSTR(MP_QSTR_PB04), MP_ROM_PTR(&pin_PB04) },
{ MP_ROM_QSTR(MP_QSTR_PB05), MP_ROM_PTR(&pin_PB05) },
{ MP_ROM_QSTR(MP_QSTR_PB06), MP_ROM_PTR(&pin_PB06) },
{ MP_ROM_QSTR(MP_QSTR_PB07), MP_ROM_PTR(&pin_PB07) },
// { MP_ROM_QSTR(MP_QSTR_PB08), MP_ROM_PTR(&pin_PB08) },
// { MP_ROM_QSTR(MP_QSTR_PB09), MP_ROM_PTR(&pin_PB09) },
// { MP_ROM_QSTR(MP_QSTR_PE00), MP_ROM_PTR(&pin_PE00) },
// { MP_ROM_QSTR(MP_QSTR_PE01), MP_ROM_PTR(&pin_PE01) },
// { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_PB10) },
// { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PB09) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA07) },
// { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA15) },
// { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB08) },
// { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PG10) },
// { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PG11) },
// { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PF03) },
// { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PF10) },
// { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PG12) },
// { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PF04) },
// { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PG13) },
// { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PG14) }, //USART6 TX
// { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PG09) }, //USART6 RX
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA01) },
// { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PC01) },
// { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PC03) },
// { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PC04) },
// { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PC05) }, //alt PB09, see F401ZG-DISCO manual
// { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB00) }, //alt PB10, see F401ZG-DISCO manual
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB06) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB07) },
{ MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_LED4), MP_ROM_PTR(&pin_PA03) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

442
ports/stm/boards/thunderpack/stm32f4xx_hal_conf.h Normal file
View File

@ -0,0 +1,442 @@
/**
******************************************************************************
* @file stm32f4xx_hal_conf_template.h
* @author MCD Application Team
* @brief HAL configuration template file.
* This file should be copied to the application folder and renamed
* to stm32f4xx_hal_conf.h.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CONF_H
#define __STM32F4xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_CAN_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
#define HAL_SRAM_MODULE_ENABLED
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
#define HAL_I2C_MODULE_ENABLED
#define HAL_I2S_MODULE_ENABLED
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
#define HAL_RNG_MODULE_ENABLED
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
#define HAL_SD_MODULE_ENABLED
/* #define HAL_MMC_MODULE_ENABLED */
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_PCD_MODULE_ENABLED
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
#define HAL_QSPI_MODULE_ENABLED
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_FMPI2C_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_EXTI_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)24000000U) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
#define DATA_CACHE_ENABLE 1U
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848_PHY_ADDRESS Address*/
#define DP83848_PHY_ADDRESS 0x01U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f4xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f4xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f4xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f4xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f4xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f4xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f4xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f4xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f4xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32f4xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f4xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f4xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f4xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f4xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f4xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f4xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f4xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f4xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f4xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f4xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f4xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f4xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f4xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f4xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f4xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f4xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f4xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f4xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f4xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f4xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f4xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f4xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f4xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f4xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f4xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f4xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_DSI_MODULE_ENABLED
#include "stm32f4xx_hal_dsi.h"
#endif /* HAL_DSI_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32f4xx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f4xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_FMPI2C_MODULE_ENABLED
#include "stm32f4xx_hal_fmpi2c.h"
#endif /* HAL_FMPI2C_MODULE_ENABLED */
#ifdef HAL_SPDIFRX_MODULE_ENABLED
#include "stm32f4xx_hal_spdifrx.h"
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
#ifdef HAL_DFSDM_MODULE_ENABLED
#include "stm32f4xx_hal_dfsdm.h"
#endif /* HAL_DFSDM_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32f4xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

77
ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/clocks.c Normal file
View File

@ -0,0 +1,77 @@
/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "stm32f4xx_hal.h"
#include "py/mpconfig.h"
void stm32f4_peripherals_clocks_init(void) {
//System clock init
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* The voltage scaling allows optimizing the power consumption when the
* device is clocked below the maximum system frequency, to update the
* voltage scaling value regarding system frequency refer to product
* datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSE Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = BOARD_OSC_DIV;
RCC_OscInitStruct.PLL.PLLN = 200;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
RCC_OscInitStruct.PLL.PLLR = 2;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
/* Select PLLSAI output as USB clock source */
PeriphClkInitStruct.PLLI2S.PLLI2SM = 12;
PeriphClkInitStruct.PLLI2S.PLLI2SQ = 3;
PeriphClkInitStruct.PLLI2S.PLLI2SR = 2;
PeriphClkInitStruct.PLLI2S.PLLI2SN = 72;
PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC;
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CK48;
PeriphClkInitStruct.Clk48ClockSelection = RCC_CK48CLKSOURCE_PLLI2SQ;
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
* clocks dividers */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK |
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
}

242
ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/gpio.c Normal file
View File

@ -0,0 +1,242 @@
/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/* GPIO PIN REFERENCE
#define LED3_Pin GPIO_PIN_2
#define LED3_GPIO_Port GPIOE
#define LED4_Pin GPIO_PIN_3
#define LED4_GPIO_Port GPIOE
#define DFSDM_DATIN3_Pin GPIO_PIN_4
#define DFSDM_DATIN3_GPIO_Port GPIOE
#define A0_Pin GPIO_PIN_0
#define A0_GPIO_Port GPIOF
#define LCD_BLCTRL_Pin GPIO_PIN_5
#define LCD_BLCTRL_GPIO_Port GPIOF
#define QSPI_BK1_IO3_Pin GPIO_PIN_6
#define QSPI_BK1_IO3_GPIO_Port GPIOF
#define QSPI_BK1_IO2_Pin GPIO_PIN_7
#define QSPI_BK1_IO2_GPIO_Port GPIOF
#define QSPI_BK1_IO0_Pin GPIO_PIN_8
#define QSPI_BK1_IO0_GPIO_Port GPIOF
#define QSPI_BK1_IO1_Pin GPIO_PIN_9
#define QSPI_BK1_IO1_GPIO_Port GPIOF
#define STLK_MCO_Pin GPIO_PIN_0
#define STLK_MCO_GPIO_Port GPIOH
#define DFSDM_CKOUT_Pin GPIO_PIN_2
#define DFSDM_CKOUT_GPIO_Port GPIOC
#define JOY_SEL_Pin GPIO_PIN_0
#define JOY_SEL_GPIO_Port GPIOA
#define STLINK_RX_Pin GPIO_PIN_2
#define STLINK_RX_GPIO_Port GPIOA
#define STLINK_TX_Pin GPIO_PIN_3
#define STLINK_TX_GPIO_Port GPIOA
#define CODEC_I2S3_WS_Pin GPIO_PIN_4
#define CODEC_I2S3_WS_GPIO_Port GPIOA
#define DFSDM_DATIN0_Pin GPIO_PIN_1
#define DFSDM_DATIN0_GPIO_Port GPIOB
#define QSPI_CLK_Pin GPIO_PIN_2
#define QSPI_CLK_GPIO_Port GPIOB
#define EXT_RESET_Pin GPIO_PIN_11
#define EXT_RESET_GPIO_Port GPIOF
#define CTP_RST_Pin GPIO_PIN_12
#define CTP_RST_GPIO_Port GPIOF
#define JOY_RIGHT_Pin GPIO_PIN_14
#define JOY_RIGHT_GPIO_Port GPIOF
#define JOY_LEFT_Pin GPIO_PIN_15
#define JOY_LEFT_GPIO_Port GPIOF
#define JOY_UP_Pin GPIO_PIN_0
#define JOY_UP_GPIO_Port GPIOG
#define JOY_DOWN_Pin GPIO_PIN_1
#define JOY_DOWN_GPIO_Port GPIOG
#define D4_Pin GPIO_PIN_7
#define D4_GPIO_Port GPIOE
#define D5_Pin GPIO_PIN_8
#define D5_GPIO_Port GPIOE
#define D6_Pin GPIO_PIN_9
#define D6_GPIO_Port GPIOE
#define D7_Pin GPIO_PIN_10
#define D7_GPIO_Port GPIOE
#define D8_Pin GPIO_PIN_11
#define D8_GPIO_Port GPIOE
#define D9_Pin GPIO_PIN_12
#define D9_GPIO_Port GPIOE
#define D10_Pin GPIO_PIN_13
#define D10_GPIO_Port GPIOE
#define D11_Pin GPIO_PIN_14
#define D11_GPIO_Port GPIOE
#define D12_Pin GPIO_PIN_15
#define D12_GPIO_Port GPIOE
#define I2C2_SCL_Pin GPIO_PIN_10
#define I2C2_SCL_GPIO_Port GPIOB
#define M2_CKIN_Pin GPIO_PIN_11
#define M2_CKIN_GPIO_Port GPIOB
#define CODEC_I2S3_SCK_Pin GPIO_PIN_12
#define CODEC_I2S3_SCK_GPIO_Port GPIOB
#define D13_Pin GPIO_PIN_8
#define D13_GPIO_Port GPIOD
#define D14_Pin GPIO_PIN_9
#define D14_GPIO_Port GPIOD
#define D15_Pin GPIO_PIN_10
#define D15_GPIO_Port GPIOD
#define LCD_RESET_Pin GPIO_PIN_11
#define LCD_RESET_GPIO_Port GPIOD
#define D0_Pin GPIO_PIN_14
#define D0_GPIO_Port GPIOD
#define D1_Pin GPIO_PIN_15
#define D1_GPIO_Port GPIOD
#define CODEC_INT_Pin GPIO_PIN_2
#define CODEC_INT_GPIO_Port GPIOG
#define LCD_TE_Pin GPIO_PIN_4
#define LCD_TE_GPIO_Port GPIOG
#define CTP_INT_Pin GPIO_PIN_5
#define CTP_INT_GPIO_Port GPIOG
#define QSPI_BK1_NCS_Pin GPIO_PIN_6
#define QSPI_BK1_NCS_GPIO_Port GPIOG
#define USB_OTGFS_OVRCR_Pin GPIO_PIN_7
#define USB_OTGFS_OVRCR_GPIO_Port GPIOG
#define USB_OTGFS_PPWR_EN_Pin GPIO_PIN_8
#define USB_OTGFS_PPWR_EN_GPIO_Port GPIOG
#define CODEC_I2S3_MCK_Pin GPIO_PIN_7
#define CODEC_I2S3_MCK_GPIO_Port GPIOC
#define uSD_D0_Pin GPIO_PIN_8
#define uSD_D0_GPIO_Port GPIOC
#define uSD_D1_Pin GPIO_PIN_9
#define uSD_D1_GPIO_Port GPIOC
#define M2_CKINA8_Pin GPIO_PIN_8
#define M2_CKINA8_GPIO_Port GPIOA
#define USB_OTGFS_VBUS_Pin GPIO_PIN_9
#define USB_OTGFS_VBUS_GPIO_Port GPIOA
#define USB_OTGFS_ID_Pin GPIO_PIN_10
#define USB_OTGFS_ID_GPIO_Port GPIOA
#define USB_OTGFS_DM_Pin GPIO_PIN_11
#define USB_OTGFS_DM_GPIO_Port GPIOA
#define USB_OTGFS_DP_Pin GPIO_PIN_12
#define USB_OTGFS_DP_GPIO_Port GPIOA
#define SWDIO_Pin GPIO_PIN_13
#define SWDIO_GPIO_Port GPIOA
#define SWCLK_Pin GPIO_PIN_14
#define SWCLK_GPIO_Port GPIOA
#define uSD_D2_Pin GPIO_PIN_10
#define uSD_D2_GPIO_Port GPIOC
#define uSD_D3_Pin GPIO_PIN_11
#define uSD_D3_GPIO_Port GPIOC
#define uSD_CLK_Pin GPIO_PIN_12
#define uSD_CLK_GPIO_Port GPIOC
#define D2_Pin GPIO_PIN_0
#define D2_GPIO_Port GPIOD
#define D3_Pin GPIO_PIN_1
#define D3_GPIO_Port GPIOD
#define uSD_CMD_Pin GPIO_PIN_2
#define uSD_CMD_GPIO_Port GPIOD
#define uSD_DETECT_Pin GPIO_PIN_3
#define uSD_DETECT_GPIO_Port GPIOD
#define FMC_NOE_Pin GPIO_PIN_4
#define FMC_NOE_GPIO_Port GPIOD
#define FMC_NWE_Pin GPIO_PIN_5
#define FMC_NWE_GPIO_Port GPIOD
#define FMC_NE1_Pin GPIO_PIN_7
#define FMC_NE1_GPIO_Port GPIOD
#define SWO_Pin GPIO_PIN_3
#define SWO_GPIO_Port GPIOB
#define CODEC_I2S3ext_SD_Pin GPIO_PIN_4
#define CODEC_I2S3ext_SD_GPIO_Port GPIOB
#define CODEC_I2S3_SD_Pin GPIO_PIN_5
#define CODEC_I2S3_SD_GPIO_Port GPIOB
#define I2C1_SCL_Pin GPIO_PIN_6
#define I2C1_SCL_GPIO_Port GPIOB
#define I2C1_SDA_Pin GPIO_PIN_7
#define I2C1_SDA_GPIO_Port GPIOB
#define I2C2_SDA_Pin GPIO_PIN_9
#define I2C2_SDA_GPIO_Port GPIOB
#define LED1_Pin GPIO_PIN_0
#define LED1_GPIO_Port GPIOE
#define LED2_Pin GPIO_PIN_1
#define LED2_GPIO_Port GPIOE
*/
#include "stm32f4xx_hal.h"
#include "stm32f4/gpio.h"
#include "common-hal/microcontroller/Pin.h"
void stm32f4_peripherals_gpio_init(void) {
//Enable all GPIO for now
GPIO_InitTypeDef GPIO_InitStruct = {0};
// __HAL_RCC_GPIOE_CLK_ENABLE();
// __HAL_RCC_GPIOC_CLK_ENABLE();
// __HAL_RCC_GPIOF_CLK_ENABLE();
// __HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
// __HAL_RCC_GPIOG_CLK_ENABLE();
// __HAL_RCC_GPIOD_CLK_ENABLE();
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3, GPIO_PIN_RESET);
//HAL_GPIO_WritePin(USB_OTGFS_PPWR_EN_GPIO_Port, USB_OTGFS_PPWR_EN_Pin, GPIO_PIN_SET);
//Configure LED pins
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
//Status LED chain
stm32f4_peripherals_status_led(0,1);
stm32f4_peripherals_status_led(1,1);
stm32f4_peripherals_status_led(2,1);
stm32f4_peripherals_status_led(3,1);
//Never reset pins
// never_reset_pin_number(2,13); //PC13 anti tamp
// never_reset_pin_number(2,14); //PC14 OSC32_IN
// never_reset_pin_number(2,15); //PC15 OSC32_OUT
never_reset_pin_number(0,13); //PA13 SWDIO
never_reset_pin_number(0,14); //PA14 SWCLK
//never_reset_pin_number(0,15); //PA15 JTDI
//never_reset_pin_number(1,3); //PB3 JTDO
//never_reset_pin_number(1,4); //PB4 JTRST
// Port H is not included in GPIO port array
// never_reset_pin_number(5,0); //PH0 JTDO
// never_reset_pin_number(5,1); //PH1 JTRST
}
void stm32f4_peripherals_status_led(uint8_t led, uint8_t state) {
switch(led)
{
case 0: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, state);
break;
case 1: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_1, state);
break;
case 2: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, state);
break;
case 3: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_3, state);
break;
default: break;
}
}

107
ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.c Normal file
View File

@ -0,0 +1,107 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
#include "py/mphal.h"
#include "stm32f4/pins.h"
#include "stm32f4/periph.h"
// I2C
I2C_TypeDef * mcu_i2c_banks[3] = {I2C1, NULL, NULL};
const mcu_i2c_sda_obj_t mcu_i2c_sda_list[8] = {
I2C_SDA(1, 4, &pin_PB07),
};
const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4] = {
I2C_SCL(1, 4, &pin_PB06),
};
// SPI
SPI_TypeDef * mcu_spi_banks[5] = {SPI1, NULL, NULL, NULL, NULL};
const mcu_spi_sck_obj_t mcu_spi_sck_list[15] = {
SPI(1, 5, &pin_PA05),
};
const mcu_spi_mosi_obj_t mcu_spi_mosi_list[14] = {
SPI(1, 5, &pin_PA07),
SPI(1, 5, &pin_PB05),
};
const mcu_spi_miso_obj_t mcu_spi_miso_list[12] = {
SPI(1, 5, &pin_PA06),
};
const mcu_spi_nss_obj_t mcu_spi_nss_list[12] = {
SPI(1, 5, &pin_PA04),
};
//UART
USART_TypeDef * mcu_uart_banks[MAX_UART] = {USART1, NULL, NULL, NULL, NULL, NULL};
bool mcu_uart_has_usart[MAX_UART] = {true, false, false, false, false, false};
const mcu_uart_tx_obj_t mcu_uart_tx_list[11] = {
UART(1, 7, &pin_PA09),
UART(1, 7, &pin_PB06),
};
const mcu_uart_rx_obj_t mcu_uart_rx_list[12] = {
UART(1, 7, &pin_PA10),
UART(1, 7, &pin_PB07),
};
//Timers
//TIM6 and TIM7 are basic timers that are only used by DAC, and don't have pins
TIM_TypeDef * mcu_tim_banks[14] = {TIM1, TIM2, TIM3, TIM4, TIM5, NULL, NULL, NULL, TIM9, NULL,
NULL, NULL, TIM13, TIM14};
const mcu_tim_pin_obj_t mcu_tim_pin_list[60] = {
TIM(2,1,1,&pin_PA00),
TIM(5,2,1,&pin_PA00),
TIM(2,1,2,&pin_PA01),
TIM(5,2,2,&pin_PA01),
TIM(2,1,3,&pin_PA02),
TIM(5,2,3,&pin_PA02),
TIM(2,1,4,&pin_PA03),
TIM(5,2,4,&pin_PA03),
TIM(9,3,1,&pin_PA02),
TIM(9,3,2,&pin_PA03),
TIM(3,2,1,&pin_PA06),
TIM(13,9,1,&pin_PA06),
TIM(3,2,2,&pin_PA07),
TIM(14,9,1,&pin_PA07),
TIM(1,1,1,&pin_PA08),
TIM(1,1,2,&pin_PA09),
TIM(1,1,3,&pin_PA10),
TIM(1,1,4,&pin_PA11),
TIM(3,2,2,&pin_PB05),
TIM(4,2,1,&pin_PB06),
TIM(4,2,2,&pin_PB07),
};

58
ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.h Normal file
View File

@ -0,0 +1,58 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
//I2C
extern I2C_TypeDef * mcu_i2c_banks[3];
extern const mcu_i2c_sda_obj_t mcu_i2c_sda_list[8];
extern const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4];
//SPI
extern SPI_TypeDef * mcu_spi_banks[5];
extern const mcu_spi_sck_obj_t mcu_spi_sck_list[15];
extern const mcu_spi_mosi_obj_t mcu_spi_mosi_list[14];
extern const mcu_spi_miso_obj_t mcu_spi_miso_list[12];
extern const mcu_spi_nss_obj_t mcu_spi_nss_list[12];
//UART
extern USART_TypeDef * mcu_uart_banks[MAX_UART];
extern bool mcu_uart_has_usart[MAX_UART];
extern const mcu_uart_tx_obj_t mcu_uart_tx_list[11];
extern const mcu_uart_rx_obj_t mcu_uart_rx_list[12];
//Timers
#define TIM_BANK_ARRAY_LEN 14
#define TIM_PIN_ARRAY_LEN 60
TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN];
const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN];
#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H

161
ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.c Normal file
View File

@ -0,0 +1,161 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
#include "py/mphal.h"
#include "stm32f4/pins.h"
const mcu_pin_obj_t pin_PE02 = PIN(4, 2, NO_ADC);
const mcu_pin_obj_t pin_PE03 = PIN(4, 3, NO_ADC);
const mcu_pin_obj_t pin_PE04 = PIN(4, 4, NO_ADC);
const mcu_pin_obj_t pin_PE05 = PIN(4, 5, NO_ADC);
const mcu_pin_obj_t pin_PE06 = PIN(4, 6, NO_ADC);
const mcu_pin_obj_t pin_PC13 = PIN(2, 13, NO_ADC); //anti-tamp
const mcu_pin_obj_t pin_PC14 = PIN(2, 14, NO_ADC); //OSC32_IN
const mcu_pin_obj_t pin_PC15 = PIN(2, 15, NO_ADC); //OSC32_OUT
const mcu_pin_obj_t pin_PF00 = PIN(5, 0, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF01 = PIN(5, 1, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF02 = PIN(5, 2, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF03 = PIN(5, 3, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF04 = PIN(5, 4, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF05 = PIN(5, 5, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF06 = PIN(5, 6, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF07 = PIN(5, 7, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF08 = PIN(5, 8, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF09 = PIN(5, 9, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF10 = PIN(5, 10, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PC00 = PIN(2, 0, ADC_INPUT(ADC_1,10));
const mcu_pin_obj_t pin_PC01 = PIN(2, 1, ADC_INPUT(ADC_1,11));
const mcu_pin_obj_t pin_PC02 = PIN(2, 2, ADC_INPUT(ADC_1,12));
const mcu_pin_obj_t pin_PC03 = PIN(2, 3, ADC_INPUT(ADC_1,13));
const mcu_pin_obj_t pin_PA00 = PIN(0, 0, ADC_INPUT(ADC_1,0));
const mcu_pin_obj_t pin_PA01 = PIN(0, 1, ADC_INPUT(ADC_1,1));
const mcu_pin_obj_t pin_PA02 = PIN(0, 2, ADC_INPUT(ADC_1,2));
const mcu_pin_obj_t pin_PA03 = PIN(0, 3, ADC_INPUT(ADC_1,3));
const mcu_pin_obj_t pin_PA04 = PIN(0, 4, ADC_INPUT(ADC_1,4));
const mcu_pin_obj_t pin_PA05 = PIN(0, 5, ADC_INPUT(ADC_1,5));
const mcu_pin_obj_t pin_PA06 = PIN(0, 6, ADC_INPUT(ADC_1,6));
const mcu_pin_obj_t pin_PA07 = PIN(0, 7, ADC_INPUT(ADC_1,7));
const mcu_pin_obj_t pin_PC04 = PIN(2, 4, ADC_INPUT(ADC_1,14));
const mcu_pin_obj_t pin_PC05 = PIN(2, 5, ADC_INPUT(ADC_1,15));
const mcu_pin_obj_t pin_PB00 = PIN(1, 0, ADC_INPUT(ADC_1,8));
const mcu_pin_obj_t pin_PB01 = PIN(1, 1, ADC_INPUT(ADC_1,9));
const mcu_pin_obj_t pin_PB02 = PIN(1, 2, NO_ADC);
const mcu_pin_obj_t pin_PF11 = PIN(5, 11, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF12 = PIN(5, 12, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF13 = PIN(5, 13, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF14 = PIN(5, 14, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF15 = PIN(5, 15, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG00 = PIN(6, 0, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG01 = PIN(6, 1, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PE07 = PIN(4, 7, NO_ADC);
const mcu_pin_obj_t pin_PE08 = PIN(4, 8, NO_ADC);
const mcu_pin_obj_t pin_PE09 = PIN(4, 9, NO_ADC);
const mcu_pin_obj_t pin_PE10 = PIN(4, 10, NO_ADC);
const mcu_pin_obj_t pin_PE11 = PIN(4, 11, NO_ADC);
const mcu_pin_obj_t pin_PE12 = PIN(4, 12, NO_ADC);
const mcu_pin_obj_t pin_PE13 = PIN(4, 13, NO_ADC);
const mcu_pin_obj_t pin_PE14 = PIN(4, 14, NO_ADC);
const mcu_pin_obj_t pin_PE15 = PIN(4, 15, NO_ADC);
const mcu_pin_obj_t pin_PB10 = PIN(1, 10, NO_ADC);
const mcu_pin_obj_t pin_PB11 = PIN(1, 11, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PB12 = PIN(1, 12, NO_ADC);
const mcu_pin_obj_t pin_PB13 = PIN(1, 13, NO_ADC);
const mcu_pin_obj_t pin_PB14 = PIN(1, 14, NO_ADC);
const mcu_pin_obj_t pin_PB15 = PIN(1, 15, NO_ADC);
const mcu_pin_obj_t pin_PD08 = PIN(3, 8, NO_ADC);
const mcu_pin_obj_t pin_PD09 = PIN(3, 9, NO_ADC);
const mcu_pin_obj_t pin_PD10 = PIN(3, 10, NO_ADC);
const mcu_pin_obj_t pin_PD11 = PIN(3, 11, NO_ADC);
const mcu_pin_obj_t pin_PD12 = PIN(3, 12, NO_ADC);
const mcu_pin_obj_t pin_PD13 = PIN(3, 13, NO_ADC);
const mcu_pin_obj_t pin_PD14 = PIN(3, 14, NO_ADC);
const mcu_pin_obj_t pin_PD15 = PIN(3, 15, NO_ADC);
const mcu_pin_obj_t pin_PG02 = PIN(6, 2, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG03 = PIN(6, 3, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG04 = PIN(6, 4, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG05 = PIN(6, 5, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG06 = PIN(6, 6, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG07 = PIN(6, 7, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG08 = PIN(6, 8, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PC06 = PIN(2, 6, NO_ADC);
const mcu_pin_obj_t pin_PC07 = PIN(2, 7, NO_ADC);
const mcu_pin_obj_t pin_PC08 = PIN(2, 8, NO_ADC);
const mcu_pin_obj_t pin_PC09 = PIN(2, 9, NO_ADC);
const mcu_pin_obj_t pin_PA08 = PIN(0, 8, NO_ADC);
const mcu_pin_obj_t pin_PA09 = PIN(0, 9, NO_ADC);
const mcu_pin_obj_t pin_PA10 = PIN(0, 10, NO_ADC);
const mcu_pin_obj_t pin_PA11 = PIN(0, 11, NO_ADC);
const mcu_pin_obj_t pin_PA12 = PIN(0, 12, NO_ADC);
const mcu_pin_obj_t pin_PA13 = PIN(0, 13, NO_ADC);
const mcu_pin_obj_t pin_PA14 = PIN(0, 14, NO_ADC);
const mcu_pin_obj_t pin_PA15 = PIN(0, 15, NO_ADC);
const mcu_pin_obj_t pin_PC10 = PIN(2, 10, NO_ADC);
const mcu_pin_obj_t pin_PC11 = PIN(2, 11, NO_ADC);
const mcu_pin_obj_t pin_PC12 = PIN(2, 12, NO_ADC);
const mcu_pin_obj_t pin_PD00 = PIN(3, 0, NO_ADC);
const mcu_pin_obj_t pin_PD01 = PIN(3, 1, NO_ADC);
const mcu_pin_obj_t pin_PD02 = PIN(3, 2, NO_ADC);
const mcu_pin_obj_t pin_PD03 = PIN(3, 3, NO_ADC);
const mcu_pin_obj_t pin_PD04 = PIN(3, 4, NO_ADC);
const mcu_pin_obj_t pin_PD05 = PIN(3, 5, NO_ADC);
const mcu_pin_obj_t pin_PD06 = PIN(3, 6, NO_ADC);
const mcu_pin_obj_t pin_PD07 = PIN(3, 7, NO_ADC);
const mcu_pin_obj_t pin_PG09 = PIN(6, 9, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG10 = PIN(6, 10, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG11 = PIN(6, 11, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG12 = PIN(6, 12, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG13 = PIN(6, 13, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG14 = PIN(6, 14, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PG15 = PIN(6, 15, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PB03 = PIN(1, 3, NO_ADC);
const mcu_pin_obj_t pin_PB04 = PIN(1, 4, NO_ADC);
const mcu_pin_obj_t pin_PB05 = PIN(1, 5, NO_ADC);
const mcu_pin_obj_t pin_PB06 = PIN(1, 6, NO_ADC);
const mcu_pin_obj_t pin_PB07 = PIN(1, 7, NO_ADC);
const mcu_pin_obj_t pin_PB08 = PIN(1, 8, NO_ADC);
const mcu_pin_obj_t pin_PB09 = PIN(1, 9, NO_ADC);
const mcu_pin_obj_t pin_PE00 = PIN(4, 0, NO_ADC);
const mcu_pin_obj_t pin_PE01 = PIN(4, 1, NO_ADC);

158
ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.h Normal file
View File

@ -0,0 +1,158 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F412ZG_PINS_H
#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F412ZG_PINS_H
//Pins in datasheet order: DocID028087 Rev 7 page 50. LQFP100 only
//pg 50
extern const mcu_pin_obj_t pin_PE02;
extern const mcu_pin_obj_t pin_PE03;
extern const mcu_pin_obj_t pin_PE04;
extern const mcu_pin_obj_t pin_PE05;
extern const mcu_pin_obj_t pin_PE06;
extern const mcu_pin_obj_t pin_PC13;
extern const mcu_pin_obj_t pin_PC14;
//pg 51
extern const mcu_pin_obj_t pin_PC15;
extern const mcu_pin_obj_t pin_PF00; // 144 only
extern const mcu_pin_obj_t pin_PF01; // 144 only
extern const mcu_pin_obj_t pin_PF02; // 144 only
extern const mcu_pin_obj_t pin_PF03; // 144 only
extern const mcu_pin_obj_t pin_PF04; // 144 only
extern const mcu_pin_obj_t pin_PF05; // 144 only
extern const mcu_pin_obj_t pin_PF06; // 144 only
extern const mcu_pin_obj_t pin_PF07; // 144 only
extern const mcu_pin_obj_t pin_PF08; // 144 only
extern const mcu_pin_obj_t pin_PF09; // 144 only
extern const mcu_pin_obj_t pin_PF10; // 144 only
//pg 52
extern const mcu_pin_obj_t pin_PC00;
extern const mcu_pin_obj_t pin_PC01;
extern const mcu_pin_obj_t pin_PC02;
extern const mcu_pin_obj_t pin_PC03;
extern const mcu_pin_obj_t pin_PA00;
extern const mcu_pin_obj_t pin_PA01;
extern const mcu_pin_obj_t pin_PA02;
//pg 53
extern const mcu_pin_obj_t pin_PA03;
extern const mcu_pin_obj_t pin_PA04;
extern const mcu_pin_obj_t pin_PA05;
extern const mcu_pin_obj_t pin_PA06;
extern const mcu_pin_obj_t pin_PA07;
extern const mcu_pin_obj_t pin_PC04;
//pg 54
extern const mcu_pin_obj_t pin_PC05;
extern const mcu_pin_obj_t pin_PB00;
extern const mcu_pin_obj_t pin_PB01;
extern const mcu_pin_obj_t pin_PB02;
extern const mcu_pin_obj_t pin_PF11; // 144 only
extern const mcu_pin_obj_t pin_PF12; // 144 only
extern const mcu_pin_obj_t pin_PF13; // 144 only
extern const mcu_pin_obj_t pin_PF14; // 144 only
extern const mcu_pin_obj_t pin_PF15; // 144 only
extern const mcu_pin_obj_t pin_PG00; // 144 only
extern const mcu_pin_obj_t pin_PG01; // 144 only
//pg 55
extern const mcu_pin_obj_t pin_PE07;
extern const mcu_pin_obj_t pin_PE08;
extern const mcu_pin_obj_t pin_PE09;
extern const mcu_pin_obj_t pin_PE10;
extern const mcu_pin_obj_t pin_PE11;
extern const mcu_pin_obj_t pin_PE12;
extern const mcu_pin_obj_t pin_PE13;
extern const mcu_pin_obj_t pin_PE14;
//pg 56
extern const mcu_pin_obj_t pin_PE15;
extern const mcu_pin_obj_t pin_PB10;
extern const mcu_pin_obj_t pin_PB11; // 144 only
extern const mcu_pin_obj_t pin_PB12;
extern const mcu_pin_obj_t pin_PB13;
//pg 57
extern const mcu_pin_obj_t pin_PB14;
extern const mcu_pin_obj_t pin_PB15;
extern const mcu_pin_obj_t pin_PD08;
extern const mcu_pin_obj_t pin_PD09;
extern const mcu_pin_obj_t pin_PD10;
extern const mcu_pin_obj_t pin_PD11;
extern const mcu_pin_obj_t pin_PD12;
//pg 58
extern const mcu_pin_obj_t pin_PD13;
extern const mcu_pin_obj_t pin_PD14;
extern const mcu_pin_obj_t pin_PD15;
extern const mcu_pin_obj_t pin_PG02; // 144 only
extern const mcu_pin_obj_t pin_PG03; // 144 only
extern const mcu_pin_obj_t pin_PG04; // 144 only
extern const mcu_pin_obj_t pin_PG05; // 144 only
extern const mcu_pin_obj_t pin_PG06; // 144 only
extern const mcu_pin_obj_t pin_PG07; // 144 only
extern const mcu_pin_obj_t pin_PG08; // 144 only
//pg 59
extern const mcu_pin_obj_t pin_PC06;
extern const mcu_pin_obj_t pin_PC07;
extern const mcu_pin_obj_t pin_PC08;
extern const mcu_pin_obj_t pin_PC09;
extern const mcu_pin_obj_t pin_PA08;
extern const mcu_pin_obj_t pin_PA09;
extern const mcu_pin_obj_t pin_PA10;
//pg 60
extern const mcu_pin_obj_t pin_PA11;
extern const mcu_pin_obj_t pin_PA12;
extern const mcu_pin_obj_t pin_PA13;
extern const mcu_pin_obj_t pin_PA14;
extern const mcu_pin_obj_t pin_PA15;
extern const mcu_pin_obj_t pin_PC10;
extern const mcu_pin_obj_t pin_PC11;
//pg 61
extern const mcu_pin_obj_t pin_PC12;
extern const mcu_pin_obj_t pin_PD00;
extern const mcu_pin_obj_t pin_PD01;
extern const mcu_pin_obj_t pin_PD02;
extern const mcu_pin_obj_t pin_PD03;
extern const mcu_pin_obj_t pin_PD04;
extern const mcu_pin_obj_t pin_PD05;
extern const mcu_pin_obj_t pin_PD06;
extern const mcu_pin_obj_t pin_PD07;
//pg 62
extern const mcu_pin_obj_t pin_PG09; // 144 only
extern const mcu_pin_obj_t pin_PG10; // 144 only
extern const mcu_pin_obj_t pin_PG11; // 144 only
extern const mcu_pin_obj_t pin_PG12; // 144 only
extern const mcu_pin_obj_t pin_PG13; // 144 only
extern const mcu_pin_obj_t pin_PG14; // 144 only
extern const mcu_pin_obj_t pin_PG15; // 144 only
extern const mcu_pin_obj_t pin_PB03;
extern const mcu_pin_obj_t pin_PB04;
//pg 63
extern const mcu_pin_obj_t pin_PB05;
extern const mcu_pin_obj_t pin_PB06;
extern const mcu_pin_obj_t pin_PB07;
extern const mcu_pin_obj_t pin_PB08;
extern const mcu_pin_obj_t pin_PB09;
extern const mcu_pin_obj_t pin_PE00;
extern const mcu_pin_obj_t pin_PE01;
#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F412ZG_PINS_H