diff --git a/ports/stm/boards/STM32F412CGUx_FLASH.ld b/ports/stm/boards/STM32F412CGUx_FLASH.ld new file mode 100644 index 0000000000..c394b8646e --- /dev/null +++ b/ports/stm/boards/STM32F412CGUx_FLASH.ld @@ -0,0 +1,189 @@ +/* +****************************************************************************** +** + +** File : LinkerScript.ld +** +** Author : Auto-generated by System Workbench for STM32 +** +** Abstract : Linker script for STM32F412CGUx series +** 1024Kbytes FLASH and 256Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© COPYRIGHT(c) 2019 STMicroelectronics

+** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of STMicroelectronics nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20040000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/ports/stm/boards/startup_stm32f412cx_thunderpack.s b/ports/stm/boards/startup_stm32f412cx_thunderpack.s new file mode 100644 index 0000000000..1c344ec08a --- /dev/null +++ b/ports/stm/boards/startup_stm32f412cx_thunderpack.s @@ -0,0 +1,521 @@ +/** + ****************************************************************************** + * @file startup_stm32f412Cx.s + * @author MCD Application Team + * @brief STM32F412Cx Devices vector table for GCC based toolchains. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ +/* bl __libc_init_array */ +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word 0 /* Reserved */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word TIM6_IRQHandler /* TIM6 */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word DFSDM1_FLT0_IRQHandler /* DFSDM1 Filter0 */ + .word DFSDM1_FLT1_IRQHandler /* DFSDM1 Filter1 */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word RNG_IRQHandler /* RNG */ + .word FPU_IRQHandler /* FPU */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word FMPI2C1_EV_IRQHandler /* FMPI2C1 Event */ + .word FMPI2C1_ER_IRQHandler /* FMPI2C1 Error */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak TIM6_IRQHandler + .thumb_set TIM6_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak DFSDM1_FLT0_IRQHandler + .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler + + .weak DFSDM1_FLT1_IRQHandler + .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak FMPI2C1_EV_IRQHandler + .thumb_set FMPI2C1_EV_IRQHandler,Default_Handler + + .weak FMPI2C1_ER_IRQHandler + .thumb_set FMPI2C1_ER_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm/boards/thunderpack/board.c b/ports/stm/boards/thunderpack/board.c new file mode 100644 index 0000000000..4421970eef --- /dev/null +++ b/ports/stm/boards/thunderpack/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/stm/boards/thunderpack/mpconfigboard.h b/ports/stm/boards/thunderpack/mpconfigboard.h new file mode 100644 index 0000000000..e374089288 --- /dev/null +++ b/ports/stm/boards/thunderpack/mpconfigboard.h @@ -0,0 +1,37 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +//Micropython setup +#define MICROPY_HW_BOARD_NAME "THUNDERPACK" +#define MICROPY_HW_MCU_NAME "STM32F412xGU" + +#define FLASH_SIZE (0x100000) +#define FLASH_PAGE_SIZE (0x4000) + +#define BOARD_OSC_DIV (24) +#define BOARD_NO_VBUS_SENSE (1) + +#define DEFAULT_I2C_BUS_SCL (&pin_PB06) +#define DEFAULT_I2C_BUS_SDA (&pin_PB07) diff --git a/ports/stm/boards/thunderpack/mpconfigboard.mk b/ports/stm/boards/thunderpack/mpconfigboard.mk new file mode 100644 index 0000000000..a5febd5802 --- /dev/null +++ b/ports/stm/boards/thunderpack/mpconfigboard.mk @@ -0,0 +1,22 @@ +USB_VID = 0x0483 +USB_PID = 0xdf11 +USB_PRODUCT = "Thunderpack" +USB_MANUFACTURER = "Jeremy Gillick" +USB_DEVICES = "CDC,MSC,HID" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = NONE + +# QSPI_FLASH_FILESYSTEM = 1 +# EXTERNAL_FLASH_DEVICE_COUNT = 1 +# EXTERNAL_FLASH_DEVICES = N25Q128A +# LONGINT_IMPL = MPZ + +MCU_SERIES = m4 +MCU_VARIANT = stm32f4 +MCU_SUB_VARIANT = stm32f412cx_thunderpack +MCU_PACKAGE = 48 +CMSIS_MCU = STM32F412Zx +LD_FILE = boards/STM32F412CGUx_FLASH.ld + + diff --git a/ports/stm/boards/thunderpack/pins.c b/ports/stm/boards/thunderpack/pins.c new file mode 100644 index 0000000000..db0b3cde1b --- /dev/null +++ b/ports/stm/boards/thunderpack/pins.c @@ -0,0 +1,95 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + // { MP_ROM_QSTR(MP_QSTR_PE02), MP_ROM_PTR(&pin_PE02) }, + // { MP_ROM_QSTR(MP_QSTR_PE03), MP_ROM_PTR(&pin_PE03) }, + // { MP_ROM_QSTR(MP_QSTR_PE04), MP_ROM_PTR(&pin_PE04) }, + // { MP_ROM_QSTR(MP_QSTR_PE05), MP_ROM_PTR(&pin_PE05) }, + // { MP_ROM_QSTR(MP_QSTR_PE06), MP_ROM_PTR(&pin_PE06) }, + // { MP_ROM_QSTR(MP_QSTR_PC13), MP_ROM_PTR(&pin_PC13) }, + // { MP_ROM_QSTR(MP_QSTR_PF02), MP_ROM_PTR(&pin_PF02) }, + // { MP_ROM_QSTR(MP_QSTR_PF03), MP_ROM_PTR(&pin_PF03) }, + // { MP_ROM_QSTR(MP_QSTR_PF10), MP_ROM_PTR(&pin_PF10) }, + // { MP_ROM_QSTR(MP_QSTR_PC00), MP_ROM_PTR(&pin_PC00) }, + // { MP_ROM_QSTR(MP_QSTR_PC01), MP_ROM_PTR(&pin_PC01) }, + // { MP_ROM_QSTR(MP_QSTR_PC02), MP_ROM_PTR(&pin_PC02) }, + // { MP_ROM_QSTR(MP_QSTR_PC03), MP_ROM_PTR(&pin_PC03) }, + { MP_ROM_QSTR(MP_QSTR_PA01), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_PA02), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_PA03), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_PA04), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_PA05), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_PA06), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_PA07), MP_ROM_PTR(&pin_PA07) }, + // { MP_ROM_QSTR(MP_QSTR_PC04), MP_ROM_PTR(&pin_PC04) }, + // { MP_ROM_QSTR(MP_QSTR_PC05), MP_ROM_PTR(&pin_PC05) }, + // { MP_ROM_QSTR(MP_QSTR_PB00), MP_ROM_PTR(&pin_PB00) }, + // { MP_ROM_QSTR(MP_QSTR_PB01), MP_ROM_PTR(&pin_PB01) }, + // { MP_ROM_QSTR(MP_QSTR_PF11), MP_ROM_PTR(&pin_PF11) }, + // { MP_ROM_QSTR(MP_QSTR_PF13), MP_ROM_PTR(&pin_PF13) }, + // { MP_ROM_QSTR(MP_QSTR_PB10), MP_ROM_PTR(&pin_PB10) }, + // { MP_ROM_QSTR(MP_QSTR_PB11), MP_ROM_PTR(&pin_PB11) }, + // { MP_ROM_QSTR(MP_QSTR_PB12), MP_ROM_PTR(&pin_PB12) }, + // { MP_ROM_QSTR(MP_QSTR_PB13), MP_ROM_PTR(&pin_PB13) }, + // { MP_ROM_QSTR(MP_QSTR_PB14), MP_ROM_PTR(&pin_PB14) }, + // { MP_ROM_QSTR(MP_QSTR_PB15), MP_ROM_PTR(&pin_PB15) }, + // { MP_ROM_QSTR(MP_QSTR_PD12), MP_ROM_PTR(&pin_PD12) }, + // { MP_ROM_QSTR(MP_QSTR_PD13), MP_ROM_PTR(&pin_PD13) }, + // { MP_ROM_QSTR(MP_QSTR_PG02), MP_ROM_PTR(&pin_PG02) }, + // { MP_ROM_QSTR(MP_QSTR_PC06), MP_ROM_PTR(&pin_PC06) }, + // { MP_ROM_QSTR(MP_QSTR_PC07), MP_ROM_PTR(&pin_PC07) }, + // { MP_ROM_QSTR(MP_QSTR_PC09), MP_ROM_PTR(&pin_PC09) }, + { MP_ROM_QSTR(MP_QSTR_PA08), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_PA10), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_PA13), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_PA14), MP_ROM_PTR(&pin_PA14) }, + // { MP_ROM_QSTR(MP_QSTR_PA15), MP_ROM_PTR(&pin_PA15) }, + // { MP_ROM_QSTR(MP_QSTR_PD06), MP_ROM_PTR(&pin_PD06) }, + // { MP_ROM_QSTR(MP_QSTR_PG09), MP_ROM_PTR(&pin_PG09) }, + // { MP_ROM_QSTR(MP_QSTR_PG10), MP_ROM_PTR(&pin_PG10) }, + // { MP_ROM_QSTR(MP_QSTR_PG11), MP_ROM_PTR(&pin_PG11) }, + // { MP_ROM_QSTR(MP_QSTR_PG12), MP_ROM_PTR(&pin_PG12) }, + // { MP_ROM_QSTR(MP_QSTR_PG13), MP_ROM_PTR(&pin_PG13) }, + // { MP_ROM_QSTR(MP_QSTR_PG14), MP_ROM_PTR(&pin_PG14) }, + // { MP_ROM_QSTR(MP_QSTR_PB03), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_PB04), MP_ROM_PTR(&pin_PB04) }, + { MP_ROM_QSTR(MP_QSTR_PB05), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_PB06), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_PB07), MP_ROM_PTR(&pin_PB07) }, + // { MP_ROM_QSTR(MP_QSTR_PB08), MP_ROM_PTR(&pin_PB08) }, + // { MP_ROM_QSTR(MP_QSTR_PB09), MP_ROM_PTR(&pin_PB09) }, + // { MP_ROM_QSTR(MP_QSTR_PE00), MP_ROM_PTR(&pin_PE00) }, + // { MP_ROM_QSTR(MP_QSTR_PE01), MP_ROM_PTR(&pin_PE01) }, + // { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_PB10) }, + // { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA07) }, + // { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA15) }, + // { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB08) }, + // { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PG10) }, + // { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PG11) }, + // { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PF03) }, + // { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PF10) }, + // { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PG12) }, + // { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PF04) }, + // { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PG13) }, + // { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PG14) }, //USART6 TX + // { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PG09) }, //USART6 RX + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA01) }, + // { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PC01) }, + // { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PC03) }, + // { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PC04) }, + // { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PC05) }, //alt PB09, see F401ZG-DISCO manual + // { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB00) }, //alt PB10, see F401ZG-DISCO manual + + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_LED4), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/stm/boards/thunderpack/stm32f4xx_hal_conf.h b/ports/stm/boards/thunderpack/stm32f4xx_hal_conf.h new file mode 100644 index 0000000000..530c7e6055 --- /dev/null +++ b/ports/stm/boards/thunderpack/stm32f4xx_hal_conf.h @@ -0,0 +1,442 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f4xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_SRAM_MODULE_ENABLED +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_RNG_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +#define HAL_SD_MODULE_ENABLED +/* #define HAL_MMC_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_QSPI_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)24000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) + +#define PHY_READ_TO ((uint32_t)0x0000FFFFU) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/clocks.c b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/clocks.c new file mode 100644 index 0000000000..0f2537df8a --- /dev/null +++ b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/clocks.c @@ -0,0 +1,77 @@ + +/* + * This file is part of the Micro Python project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include "stm32f4xx_hal.h" +#include "py/mpconfig.h" + +void stm32f4_peripherals_clocks_init(void) { + //System clock init + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the + * device is clocked below the maximum system frequency, to update the + * voltage scaling value regarding system frequency refer to product + * datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = BOARD_OSC_DIV; + RCC_OscInitStruct.PLL.PLLN = 200; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + RCC_OscInitStruct.PLL.PLLR = 2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLLSAI output as USB clock source */ + PeriphClkInitStruct.PLLI2S.PLLI2SM = 12; + PeriphClkInitStruct.PLLI2S.PLLI2SQ = 3; + PeriphClkInitStruct.PLLI2S.PLLI2SR = 2; + PeriphClkInitStruct.PLLI2S.PLLI2SN = 72; + PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC; + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CK48; + PeriphClkInitStruct.Clk48ClockSelection = RCC_CK48CLKSOURCE_PLLI2SQ; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + * clocks dividers */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | + RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); +} diff --git a/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/gpio.c b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/gpio.c new file mode 100644 index 0000000000..8f47ba3197 --- /dev/null +++ b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/gpio.c @@ -0,0 +1,242 @@ +/* + * This file is part of the Micro Python project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* GPIO PIN REFERENCE +#define LED3_Pin GPIO_PIN_2 +#define LED3_GPIO_Port GPIOE +#define LED4_Pin GPIO_PIN_3 +#define LED4_GPIO_Port GPIOE +#define DFSDM_DATIN3_Pin GPIO_PIN_4 +#define DFSDM_DATIN3_GPIO_Port GPIOE +#define A0_Pin GPIO_PIN_0 +#define A0_GPIO_Port GPIOF +#define LCD_BLCTRL_Pin GPIO_PIN_5 +#define LCD_BLCTRL_GPIO_Port GPIOF +#define QSPI_BK1_IO3_Pin GPIO_PIN_6 +#define QSPI_BK1_IO3_GPIO_Port GPIOF +#define QSPI_BK1_IO2_Pin GPIO_PIN_7 +#define QSPI_BK1_IO2_GPIO_Port GPIOF +#define QSPI_BK1_IO0_Pin GPIO_PIN_8 +#define QSPI_BK1_IO0_GPIO_Port GPIOF +#define QSPI_BK1_IO1_Pin GPIO_PIN_9 +#define QSPI_BK1_IO1_GPIO_Port GPIOF +#define STLK_MCO_Pin GPIO_PIN_0 +#define STLK_MCO_GPIO_Port GPIOH +#define DFSDM_CKOUT_Pin GPIO_PIN_2 +#define DFSDM_CKOUT_GPIO_Port GPIOC +#define JOY_SEL_Pin GPIO_PIN_0 +#define JOY_SEL_GPIO_Port GPIOA +#define STLINK_RX_Pin GPIO_PIN_2 +#define STLINK_RX_GPIO_Port GPIOA +#define STLINK_TX_Pin GPIO_PIN_3 +#define STLINK_TX_GPIO_Port GPIOA +#define CODEC_I2S3_WS_Pin GPIO_PIN_4 +#define CODEC_I2S3_WS_GPIO_Port GPIOA +#define DFSDM_DATIN0_Pin GPIO_PIN_1 +#define DFSDM_DATIN0_GPIO_Port GPIOB +#define QSPI_CLK_Pin GPIO_PIN_2 +#define QSPI_CLK_GPIO_Port GPIOB +#define EXT_RESET_Pin GPIO_PIN_11 +#define EXT_RESET_GPIO_Port GPIOF +#define CTP_RST_Pin GPIO_PIN_12 +#define CTP_RST_GPIO_Port GPIOF +#define JOY_RIGHT_Pin GPIO_PIN_14 +#define JOY_RIGHT_GPIO_Port GPIOF +#define JOY_LEFT_Pin GPIO_PIN_15 +#define JOY_LEFT_GPIO_Port GPIOF +#define JOY_UP_Pin GPIO_PIN_0 +#define JOY_UP_GPIO_Port GPIOG +#define JOY_DOWN_Pin GPIO_PIN_1 +#define JOY_DOWN_GPIO_Port GPIOG +#define D4_Pin GPIO_PIN_7 +#define D4_GPIO_Port GPIOE +#define D5_Pin GPIO_PIN_8 +#define D5_GPIO_Port GPIOE +#define D6_Pin GPIO_PIN_9 +#define D6_GPIO_Port GPIOE +#define D7_Pin GPIO_PIN_10 +#define D7_GPIO_Port GPIOE +#define D8_Pin GPIO_PIN_11 +#define D8_GPIO_Port GPIOE +#define D9_Pin GPIO_PIN_12 +#define D9_GPIO_Port GPIOE +#define D10_Pin GPIO_PIN_13 +#define D10_GPIO_Port GPIOE +#define D11_Pin GPIO_PIN_14 +#define D11_GPIO_Port GPIOE +#define D12_Pin GPIO_PIN_15 +#define D12_GPIO_Port GPIOE +#define I2C2_SCL_Pin GPIO_PIN_10 +#define I2C2_SCL_GPIO_Port GPIOB +#define M2_CKIN_Pin GPIO_PIN_11 +#define M2_CKIN_GPIO_Port GPIOB +#define CODEC_I2S3_SCK_Pin GPIO_PIN_12 +#define CODEC_I2S3_SCK_GPIO_Port GPIOB +#define D13_Pin GPIO_PIN_8 +#define D13_GPIO_Port GPIOD +#define D14_Pin GPIO_PIN_9 +#define D14_GPIO_Port GPIOD +#define D15_Pin GPIO_PIN_10 +#define D15_GPIO_Port GPIOD +#define LCD_RESET_Pin GPIO_PIN_11 +#define LCD_RESET_GPIO_Port GPIOD +#define D0_Pin GPIO_PIN_14 +#define D0_GPIO_Port GPIOD +#define D1_Pin GPIO_PIN_15 +#define D1_GPIO_Port GPIOD +#define CODEC_INT_Pin GPIO_PIN_2 +#define CODEC_INT_GPIO_Port GPIOG +#define LCD_TE_Pin GPIO_PIN_4 +#define LCD_TE_GPIO_Port GPIOG +#define CTP_INT_Pin GPIO_PIN_5 +#define CTP_INT_GPIO_Port GPIOG +#define QSPI_BK1_NCS_Pin GPIO_PIN_6 +#define QSPI_BK1_NCS_GPIO_Port GPIOG +#define USB_OTGFS_OVRCR_Pin GPIO_PIN_7 +#define USB_OTGFS_OVRCR_GPIO_Port GPIOG +#define USB_OTGFS_PPWR_EN_Pin GPIO_PIN_8 +#define USB_OTGFS_PPWR_EN_GPIO_Port GPIOG +#define CODEC_I2S3_MCK_Pin GPIO_PIN_7 +#define CODEC_I2S3_MCK_GPIO_Port GPIOC +#define uSD_D0_Pin GPIO_PIN_8 +#define uSD_D0_GPIO_Port GPIOC +#define uSD_D1_Pin GPIO_PIN_9 +#define uSD_D1_GPIO_Port GPIOC +#define M2_CKINA8_Pin GPIO_PIN_8 +#define M2_CKINA8_GPIO_Port GPIOA +#define USB_OTGFS_VBUS_Pin GPIO_PIN_9 +#define USB_OTGFS_VBUS_GPIO_Port GPIOA +#define USB_OTGFS_ID_Pin GPIO_PIN_10 +#define USB_OTGFS_ID_GPIO_Port GPIOA +#define USB_OTGFS_DM_Pin GPIO_PIN_11 +#define USB_OTGFS_DM_GPIO_Port GPIOA +#define USB_OTGFS_DP_Pin GPIO_PIN_12 +#define USB_OTGFS_DP_GPIO_Port GPIOA +#define SWDIO_Pin GPIO_PIN_13 +#define SWDIO_GPIO_Port GPIOA +#define SWCLK_Pin GPIO_PIN_14 +#define SWCLK_GPIO_Port GPIOA +#define uSD_D2_Pin GPIO_PIN_10 +#define uSD_D2_GPIO_Port GPIOC +#define uSD_D3_Pin GPIO_PIN_11 +#define uSD_D3_GPIO_Port GPIOC +#define uSD_CLK_Pin GPIO_PIN_12 +#define uSD_CLK_GPIO_Port GPIOC +#define D2_Pin GPIO_PIN_0 +#define D2_GPIO_Port GPIOD +#define D3_Pin GPIO_PIN_1 +#define D3_GPIO_Port GPIOD +#define uSD_CMD_Pin GPIO_PIN_2 +#define uSD_CMD_GPIO_Port GPIOD +#define uSD_DETECT_Pin GPIO_PIN_3 +#define uSD_DETECT_GPIO_Port GPIOD +#define FMC_NOE_Pin GPIO_PIN_4 +#define FMC_NOE_GPIO_Port GPIOD +#define FMC_NWE_Pin GPIO_PIN_5 +#define FMC_NWE_GPIO_Port GPIOD +#define FMC_NE1_Pin GPIO_PIN_7 +#define FMC_NE1_GPIO_Port GPIOD +#define SWO_Pin GPIO_PIN_3 +#define SWO_GPIO_Port GPIOB +#define CODEC_I2S3ext_SD_Pin GPIO_PIN_4 +#define CODEC_I2S3ext_SD_GPIO_Port GPIOB +#define CODEC_I2S3_SD_Pin GPIO_PIN_5 +#define CODEC_I2S3_SD_GPIO_Port GPIOB +#define I2C1_SCL_Pin GPIO_PIN_6 +#define I2C1_SCL_GPIO_Port GPIOB +#define I2C1_SDA_Pin GPIO_PIN_7 +#define I2C1_SDA_GPIO_Port GPIOB +#define I2C2_SDA_Pin GPIO_PIN_9 +#define I2C2_SDA_GPIO_Port GPIOB +#define LED1_Pin GPIO_PIN_0 +#define LED1_GPIO_Port GPIOE +#define LED2_Pin GPIO_PIN_1 +#define LED2_GPIO_Port GPIOE +*/ + +#include "stm32f4xx_hal.h" +#include "stm32f4/gpio.h" +#include "common-hal/microcontroller/Pin.h" + +void stm32f4_peripherals_gpio_init(void) { + //Enable all GPIO for now + GPIO_InitTypeDef GPIO_InitStruct = {0}; + // __HAL_RCC_GPIOE_CLK_ENABLE(); + // __HAL_RCC_GPIOC_CLK_ENABLE(); + // __HAL_RCC_GPIOF_CLK_ENABLE(); + // __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + // __HAL_RCC_GPIOG_CLK_ENABLE(); + // __HAL_RCC_GPIOD_CLK_ENABLE(); + + HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3, GPIO_PIN_RESET); + //HAL_GPIO_WritePin(USB_OTGFS_PPWR_EN_GPIO_Port, USB_OTGFS_PPWR_EN_Pin, GPIO_PIN_SET); + + //Configure LED pins + GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + //Status LED chain + stm32f4_peripherals_status_led(0,1); + stm32f4_peripherals_status_led(1,1); + stm32f4_peripherals_status_led(2,1); + stm32f4_peripherals_status_led(3,1); + + //Never reset pins + // never_reset_pin_number(2,13); //PC13 anti tamp + // never_reset_pin_number(2,14); //PC14 OSC32_IN + // never_reset_pin_number(2,15); //PC15 OSC32_OUT + never_reset_pin_number(0,13); //PA13 SWDIO + never_reset_pin_number(0,14); //PA14 SWCLK + //never_reset_pin_number(0,15); //PA15 JTDI + //never_reset_pin_number(1,3); //PB3 JTDO + //never_reset_pin_number(1,4); //PB4 JTRST + + // Port H is not included in GPIO port array + // never_reset_pin_number(5,0); //PH0 JTDO + // never_reset_pin_number(5,1); //PH1 JTRST +} + +void stm32f4_peripherals_status_led(uint8_t led, uint8_t state) { + switch(led) + { + case 0: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, state); + break; + case 1: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_1, state); + break; + case 2: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, state); + break; + case 3: HAL_GPIO_WritePin(GPIOA, GPIO_PIN_3, state); + break; + default: break; + } +} + + diff --git a/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.c b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.c new file mode 100644 index 0000000000..aa9d7abf53 --- /dev/null +++ b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.c @@ -0,0 +1,107 @@ + /* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/obj.h" +#include "py/mphal.h" +#include "stm32f4/pins.h" +#include "stm32f4/periph.h" + +// I2C + +I2C_TypeDef * mcu_i2c_banks[3] = {I2C1, NULL, NULL}; + +const mcu_i2c_sda_obj_t mcu_i2c_sda_list[8] = { + I2C_SDA(1, 4, &pin_PB07), +}; + +const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4] = { + I2C_SCL(1, 4, &pin_PB06), +}; + +// SPI + +SPI_TypeDef * mcu_spi_banks[5] = {SPI1, NULL, NULL, NULL, NULL}; + +const mcu_spi_sck_obj_t mcu_spi_sck_list[15] = { + SPI(1, 5, &pin_PA05), +}; + +const mcu_spi_mosi_obj_t mcu_spi_mosi_list[14] = { + SPI(1, 5, &pin_PA07), + SPI(1, 5, &pin_PB05), +}; + +const mcu_spi_miso_obj_t mcu_spi_miso_list[12] = { + SPI(1, 5, &pin_PA06), +}; + +const mcu_spi_nss_obj_t mcu_spi_nss_list[12] = { + SPI(1, 5, &pin_PA04), +}; + +//UART + +USART_TypeDef * mcu_uart_banks[MAX_UART] = {USART1, NULL, NULL, NULL, NULL, NULL}; +bool mcu_uart_has_usart[MAX_UART] = {true, false, false, false, false, false}; + +const mcu_uart_tx_obj_t mcu_uart_tx_list[11] = { + UART(1, 7, &pin_PA09), + UART(1, 7, &pin_PB06), +}; + +const mcu_uart_rx_obj_t mcu_uart_rx_list[12] = { + UART(1, 7, &pin_PA10), + UART(1, 7, &pin_PB07), +}; + +//Timers +//TIM6 and TIM7 are basic timers that are only used by DAC, and don't have pins +TIM_TypeDef * mcu_tim_banks[14] = {TIM1, TIM2, TIM3, TIM4, TIM5, NULL, NULL, NULL, TIM9, NULL, + NULL, NULL, TIM13, TIM14}; + +const mcu_tim_pin_obj_t mcu_tim_pin_list[60] = { + TIM(2,1,1,&pin_PA00), + TIM(5,2,1,&pin_PA00), + TIM(2,1,2,&pin_PA01), + TIM(5,2,2,&pin_PA01), + TIM(2,1,3,&pin_PA02), + TIM(5,2,3,&pin_PA02), + TIM(2,1,4,&pin_PA03), + TIM(5,2,4,&pin_PA03), + TIM(9,3,1,&pin_PA02), + TIM(9,3,2,&pin_PA03), + TIM(3,2,1,&pin_PA06), + TIM(13,9,1,&pin_PA06), + TIM(3,2,2,&pin_PA07), + TIM(14,9,1,&pin_PA07), + TIM(1,1,1,&pin_PA08), + TIM(1,1,2,&pin_PA09), + TIM(1,1,3,&pin_PA10), + TIM(1,1,4,&pin_PA11), + TIM(3,2,2,&pin_PB05), + TIM(4,2,1,&pin_PB06), + TIM(4,2,2,&pin_PB07), +}; diff --git a/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.h b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.h new file mode 100644 index 0000000000..e0141e6dab --- /dev/null +++ b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/periph.h @@ -0,0 +1,58 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H +#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H + +//I2C +extern I2C_TypeDef * mcu_i2c_banks[3]; + +extern const mcu_i2c_sda_obj_t mcu_i2c_sda_list[8]; +extern const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4]; + + +//SPI +extern SPI_TypeDef * mcu_spi_banks[5]; + +extern const mcu_spi_sck_obj_t mcu_spi_sck_list[15]; +extern const mcu_spi_mosi_obj_t mcu_spi_mosi_list[14]; +extern const mcu_spi_miso_obj_t mcu_spi_miso_list[12]; +extern const mcu_spi_nss_obj_t mcu_spi_nss_list[12]; + +//UART +extern USART_TypeDef * mcu_uart_banks[MAX_UART]; +extern bool mcu_uart_has_usart[MAX_UART]; + +extern const mcu_uart_tx_obj_t mcu_uart_tx_list[11]; +extern const mcu_uart_rx_obj_t mcu_uart_rx_list[12]; + +//Timers +#define TIM_BANK_ARRAY_LEN 14 +#define TIM_PIN_ARRAY_LEN 60 +TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; + +#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H \ No newline at end of file diff --git a/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.c b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.c new file mode 100644 index 0000000000..c56de5a295 --- /dev/null +++ b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.c @@ -0,0 +1,161 @@ + /* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/obj.h" +#include "py/mphal.h" +#include "stm32f4/pins.h" + +const mcu_pin_obj_t pin_PE02 = PIN(4, 2, NO_ADC); +const mcu_pin_obj_t pin_PE03 = PIN(4, 3, NO_ADC); +const mcu_pin_obj_t pin_PE04 = PIN(4, 4, NO_ADC); +const mcu_pin_obj_t pin_PE05 = PIN(4, 5, NO_ADC); +const mcu_pin_obj_t pin_PE06 = PIN(4, 6, NO_ADC); + +const mcu_pin_obj_t pin_PC13 = PIN(2, 13, NO_ADC); //anti-tamp +const mcu_pin_obj_t pin_PC14 = PIN(2, 14, NO_ADC); //OSC32_IN +const mcu_pin_obj_t pin_PC15 = PIN(2, 15, NO_ADC); //OSC32_OUT + +const mcu_pin_obj_t pin_PF00 = PIN(5, 0, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF01 = PIN(5, 1, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF02 = PIN(5, 2, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF03 = PIN(5, 3, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF04 = PIN(5, 4, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF05 = PIN(5, 5, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF06 = PIN(5, 6, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF07 = PIN(5, 7, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF08 = PIN(5, 8, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF09 = PIN(5, 9, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF10 = PIN(5, 10, NO_ADC); // 144 only + +const mcu_pin_obj_t pin_PC00 = PIN(2, 0, ADC_INPUT(ADC_1,10)); +const mcu_pin_obj_t pin_PC01 = PIN(2, 1, ADC_INPUT(ADC_1,11)); +const mcu_pin_obj_t pin_PC02 = PIN(2, 2, ADC_INPUT(ADC_1,12)); +const mcu_pin_obj_t pin_PC03 = PIN(2, 3, ADC_INPUT(ADC_1,13)); + +const mcu_pin_obj_t pin_PA00 = PIN(0, 0, ADC_INPUT(ADC_1,0)); +const mcu_pin_obj_t pin_PA01 = PIN(0, 1, ADC_INPUT(ADC_1,1)); +const mcu_pin_obj_t pin_PA02 = PIN(0, 2, ADC_INPUT(ADC_1,2)); +const mcu_pin_obj_t pin_PA03 = PIN(0, 3, ADC_INPUT(ADC_1,3)); +const mcu_pin_obj_t pin_PA04 = PIN(0, 4, ADC_INPUT(ADC_1,4)); +const mcu_pin_obj_t pin_PA05 = PIN(0, 5, ADC_INPUT(ADC_1,5)); +const mcu_pin_obj_t pin_PA06 = PIN(0, 6, ADC_INPUT(ADC_1,6)); +const mcu_pin_obj_t pin_PA07 = PIN(0, 7, ADC_INPUT(ADC_1,7)); + +const mcu_pin_obj_t pin_PC04 = PIN(2, 4, ADC_INPUT(ADC_1,14)); +const mcu_pin_obj_t pin_PC05 = PIN(2, 5, ADC_INPUT(ADC_1,15)); + +const mcu_pin_obj_t pin_PB00 = PIN(1, 0, ADC_INPUT(ADC_1,8)); +const mcu_pin_obj_t pin_PB01 = PIN(1, 1, ADC_INPUT(ADC_1,9)); +const mcu_pin_obj_t pin_PB02 = PIN(1, 2, NO_ADC); + +const mcu_pin_obj_t pin_PF11 = PIN(5, 11, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF12 = PIN(5, 12, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF13 = PIN(5, 13, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF14 = PIN(5, 14, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PF15 = PIN(5, 15, NO_ADC); // 144 only + +const mcu_pin_obj_t pin_PG00 = PIN(6, 0, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG01 = PIN(6, 1, NO_ADC); // 144 only + +const mcu_pin_obj_t pin_PE07 = PIN(4, 7, NO_ADC); +const mcu_pin_obj_t pin_PE08 = PIN(4, 8, NO_ADC); +const mcu_pin_obj_t pin_PE09 = PIN(4, 9, NO_ADC); +const mcu_pin_obj_t pin_PE10 = PIN(4, 10, NO_ADC); +const mcu_pin_obj_t pin_PE11 = PIN(4, 11, NO_ADC); +const mcu_pin_obj_t pin_PE12 = PIN(4, 12, NO_ADC); +const mcu_pin_obj_t pin_PE13 = PIN(4, 13, NO_ADC); +const mcu_pin_obj_t pin_PE14 = PIN(4, 14, NO_ADC); +const mcu_pin_obj_t pin_PE15 = PIN(4, 15, NO_ADC); + +const mcu_pin_obj_t pin_PB10 = PIN(1, 10, NO_ADC); +const mcu_pin_obj_t pin_PB11 = PIN(1, 11, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PB12 = PIN(1, 12, NO_ADC); +const mcu_pin_obj_t pin_PB13 = PIN(1, 13, NO_ADC); +const mcu_pin_obj_t pin_PB14 = PIN(1, 14, NO_ADC); +const mcu_pin_obj_t pin_PB15 = PIN(1, 15, NO_ADC); + +const mcu_pin_obj_t pin_PD08 = PIN(3, 8, NO_ADC); +const mcu_pin_obj_t pin_PD09 = PIN(3, 9, NO_ADC); +const mcu_pin_obj_t pin_PD10 = PIN(3, 10, NO_ADC); +const mcu_pin_obj_t pin_PD11 = PIN(3, 11, NO_ADC); +const mcu_pin_obj_t pin_PD12 = PIN(3, 12, NO_ADC); +const mcu_pin_obj_t pin_PD13 = PIN(3, 13, NO_ADC); +const mcu_pin_obj_t pin_PD14 = PIN(3, 14, NO_ADC); +const mcu_pin_obj_t pin_PD15 = PIN(3, 15, NO_ADC); + +const mcu_pin_obj_t pin_PG02 = PIN(6, 2, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG03 = PIN(6, 3, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG04 = PIN(6, 4, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG05 = PIN(6, 5, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG06 = PIN(6, 6, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG07 = PIN(6, 7, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG08 = PIN(6, 8, NO_ADC); // 144 only + +const mcu_pin_obj_t pin_PC06 = PIN(2, 6, NO_ADC); +const mcu_pin_obj_t pin_PC07 = PIN(2, 7, NO_ADC); +const mcu_pin_obj_t pin_PC08 = PIN(2, 8, NO_ADC); +const mcu_pin_obj_t pin_PC09 = PIN(2, 9, NO_ADC); + +const mcu_pin_obj_t pin_PA08 = PIN(0, 8, NO_ADC); +const mcu_pin_obj_t pin_PA09 = PIN(0, 9, NO_ADC); +const mcu_pin_obj_t pin_PA10 = PIN(0, 10, NO_ADC); +const mcu_pin_obj_t pin_PA11 = PIN(0, 11, NO_ADC); +const mcu_pin_obj_t pin_PA12 = PIN(0, 12, NO_ADC); +const mcu_pin_obj_t pin_PA13 = PIN(0, 13, NO_ADC); +const mcu_pin_obj_t pin_PA14 = PIN(0, 14, NO_ADC); +const mcu_pin_obj_t pin_PA15 = PIN(0, 15, NO_ADC); + +const mcu_pin_obj_t pin_PC10 = PIN(2, 10, NO_ADC); +const mcu_pin_obj_t pin_PC11 = PIN(2, 11, NO_ADC); +const mcu_pin_obj_t pin_PC12 = PIN(2, 12, NO_ADC); + +const mcu_pin_obj_t pin_PD00 = PIN(3, 0, NO_ADC); +const mcu_pin_obj_t pin_PD01 = PIN(3, 1, NO_ADC); +const mcu_pin_obj_t pin_PD02 = PIN(3, 2, NO_ADC); +const mcu_pin_obj_t pin_PD03 = PIN(3, 3, NO_ADC); +const mcu_pin_obj_t pin_PD04 = PIN(3, 4, NO_ADC); +const mcu_pin_obj_t pin_PD05 = PIN(3, 5, NO_ADC); +const mcu_pin_obj_t pin_PD06 = PIN(3, 6, NO_ADC); +const mcu_pin_obj_t pin_PD07 = PIN(3, 7, NO_ADC); + +const mcu_pin_obj_t pin_PG09 = PIN(6, 9, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG10 = PIN(6, 10, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG11 = PIN(6, 11, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG12 = PIN(6, 12, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG13 = PIN(6, 13, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG14 = PIN(6, 14, NO_ADC); // 144 only +const mcu_pin_obj_t pin_PG15 = PIN(6, 15, NO_ADC); // 144 only + +const mcu_pin_obj_t pin_PB03 = PIN(1, 3, NO_ADC); +const mcu_pin_obj_t pin_PB04 = PIN(1, 4, NO_ADC); +const mcu_pin_obj_t pin_PB05 = PIN(1, 5, NO_ADC); +const mcu_pin_obj_t pin_PB06 = PIN(1, 6, NO_ADC); +const mcu_pin_obj_t pin_PB07 = PIN(1, 7, NO_ADC); +const mcu_pin_obj_t pin_PB08 = PIN(1, 8, NO_ADC); +const mcu_pin_obj_t pin_PB09 = PIN(1, 9, NO_ADC); + +const mcu_pin_obj_t pin_PE00 = PIN(4, 0, NO_ADC); +const mcu_pin_obj_t pin_PE01 = PIN(4, 1, NO_ADC); diff --git a/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.h b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.h new file mode 100644 index 0000000000..180f5c316f --- /dev/null +++ b/ports/stm/peripherals/stm32f4/stm32f412cx_thunderpack/pins.h @@ -0,0 +1,158 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F412ZG_PINS_H +#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F412ZG_PINS_H + +//Pins in datasheet order: DocID028087 Rev 7 page 50. LQFP100 only +//pg 50 +extern const mcu_pin_obj_t pin_PE02; +extern const mcu_pin_obj_t pin_PE03; +extern const mcu_pin_obj_t pin_PE04; +extern const mcu_pin_obj_t pin_PE05; +extern const mcu_pin_obj_t pin_PE06; +extern const mcu_pin_obj_t pin_PC13; +extern const mcu_pin_obj_t pin_PC14; +//pg 51 +extern const mcu_pin_obj_t pin_PC15; +extern const mcu_pin_obj_t pin_PF00; // 144 only +extern const mcu_pin_obj_t pin_PF01; // 144 only +extern const mcu_pin_obj_t pin_PF02; // 144 only +extern const mcu_pin_obj_t pin_PF03; // 144 only +extern const mcu_pin_obj_t pin_PF04; // 144 only +extern const mcu_pin_obj_t pin_PF05; // 144 only +extern const mcu_pin_obj_t pin_PF06; // 144 only +extern const mcu_pin_obj_t pin_PF07; // 144 only +extern const mcu_pin_obj_t pin_PF08; // 144 only +extern const mcu_pin_obj_t pin_PF09; // 144 only +extern const mcu_pin_obj_t pin_PF10; // 144 only +//pg 52 +extern const mcu_pin_obj_t pin_PC00; +extern const mcu_pin_obj_t pin_PC01; +extern const mcu_pin_obj_t pin_PC02; +extern const mcu_pin_obj_t pin_PC03; +extern const mcu_pin_obj_t pin_PA00; +extern const mcu_pin_obj_t pin_PA01; +extern const mcu_pin_obj_t pin_PA02; +//pg 53 +extern const mcu_pin_obj_t pin_PA03; +extern const mcu_pin_obj_t pin_PA04; +extern const mcu_pin_obj_t pin_PA05; +extern const mcu_pin_obj_t pin_PA06; +extern const mcu_pin_obj_t pin_PA07; +extern const mcu_pin_obj_t pin_PC04; +//pg 54 +extern const mcu_pin_obj_t pin_PC05; +extern const mcu_pin_obj_t pin_PB00; +extern const mcu_pin_obj_t pin_PB01; +extern const mcu_pin_obj_t pin_PB02; +extern const mcu_pin_obj_t pin_PF11; // 144 only +extern const mcu_pin_obj_t pin_PF12; // 144 only +extern const mcu_pin_obj_t pin_PF13; // 144 only +extern const mcu_pin_obj_t pin_PF14; // 144 only +extern const mcu_pin_obj_t pin_PF15; // 144 only +extern const mcu_pin_obj_t pin_PG00; // 144 only +extern const mcu_pin_obj_t pin_PG01; // 144 only +//pg 55 +extern const mcu_pin_obj_t pin_PE07; +extern const mcu_pin_obj_t pin_PE08; +extern const mcu_pin_obj_t pin_PE09; +extern const mcu_pin_obj_t pin_PE10; +extern const mcu_pin_obj_t pin_PE11; +extern const mcu_pin_obj_t pin_PE12; +extern const mcu_pin_obj_t pin_PE13; +extern const mcu_pin_obj_t pin_PE14; +//pg 56 +extern const mcu_pin_obj_t pin_PE15; +extern const mcu_pin_obj_t pin_PB10; +extern const mcu_pin_obj_t pin_PB11; // 144 only +extern const mcu_pin_obj_t pin_PB12; +extern const mcu_pin_obj_t pin_PB13; +//pg 57 +extern const mcu_pin_obj_t pin_PB14; +extern const mcu_pin_obj_t pin_PB15; +extern const mcu_pin_obj_t pin_PD08; +extern const mcu_pin_obj_t pin_PD09; +extern const mcu_pin_obj_t pin_PD10; +extern const mcu_pin_obj_t pin_PD11; +extern const mcu_pin_obj_t pin_PD12; +//pg 58 +extern const mcu_pin_obj_t pin_PD13; +extern const mcu_pin_obj_t pin_PD14; +extern const mcu_pin_obj_t pin_PD15; +extern const mcu_pin_obj_t pin_PG02; // 144 only +extern const mcu_pin_obj_t pin_PG03; // 144 only +extern const mcu_pin_obj_t pin_PG04; // 144 only +extern const mcu_pin_obj_t pin_PG05; // 144 only +extern const mcu_pin_obj_t pin_PG06; // 144 only +extern const mcu_pin_obj_t pin_PG07; // 144 only +extern const mcu_pin_obj_t pin_PG08; // 144 only +//pg 59 +extern const mcu_pin_obj_t pin_PC06; +extern const mcu_pin_obj_t pin_PC07; +extern const mcu_pin_obj_t pin_PC08; +extern const mcu_pin_obj_t pin_PC09; +extern const mcu_pin_obj_t pin_PA08; +extern const mcu_pin_obj_t pin_PA09; +extern const mcu_pin_obj_t pin_PA10; +//pg 60 +extern const mcu_pin_obj_t pin_PA11; +extern const mcu_pin_obj_t pin_PA12; +extern const mcu_pin_obj_t pin_PA13; +extern const mcu_pin_obj_t pin_PA14; +extern const mcu_pin_obj_t pin_PA15; +extern const mcu_pin_obj_t pin_PC10; +extern const mcu_pin_obj_t pin_PC11; +//pg 61 +extern const mcu_pin_obj_t pin_PC12; +extern const mcu_pin_obj_t pin_PD00; +extern const mcu_pin_obj_t pin_PD01; +extern const mcu_pin_obj_t pin_PD02; +extern const mcu_pin_obj_t pin_PD03; +extern const mcu_pin_obj_t pin_PD04; +extern const mcu_pin_obj_t pin_PD05; +extern const mcu_pin_obj_t pin_PD06; +extern const mcu_pin_obj_t pin_PD07; +//pg 62 +extern const mcu_pin_obj_t pin_PG09; // 144 only +extern const mcu_pin_obj_t pin_PG10; // 144 only +extern const mcu_pin_obj_t pin_PG11; // 144 only +extern const mcu_pin_obj_t pin_PG12; // 144 only +extern const mcu_pin_obj_t pin_PG13; // 144 only +extern const mcu_pin_obj_t pin_PG14; // 144 only +extern const mcu_pin_obj_t pin_PG15; // 144 only +extern const mcu_pin_obj_t pin_PB03; +extern const mcu_pin_obj_t pin_PB04; +//pg 63 +extern const mcu_pin_obj_t pin_PB05; +extern const mcu_pin_obj_t pin_PB06; +extern const mcu_pin_obj_t pin_PB07; +extern const mcu_pin_obj_t pin_PB08; +extern const mcu_pin_obj_t pin_PB09; +extern const mcu_pin_obj_t pin_PE00; +extern const mcu_pin_obj_t pin_PE01; + +#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F412ZG_PINS_H