djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fd4695d0f2
circuitpython/ports/mimxrt10xx/boards/teensy40/pins.c

139 lines
6.5 KiB
C
Raw Normal View History

Refine iMX RT memory layout and add three boards Introduces a way to place CircuitPython code and data into tightly coupled memory (TCM) which is accessible by the CPU in a single cycle. It also frees up room in the corresponding cache for intermittent data. Loading from external flash is slow! The data cache is also now enabled. Adds support for the iMX RT 1021 chip. Adds three new boards: * iMX RT 1020 EVK * iMX RT 1060 EVK * Teensy 4.0 Related to #2492, #2472 and #2477. Fixes #2475.
2020-01-08 23:32:45 -05:00
#include "shared-bindings/board/__init__.h"
Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786
2020-12-02 21:05:29 -05:00
#include "supervisor/board.h"
Refine iMX RT memory layout and add three boards Introduces a way to place CircuitPython code and data into tightly coupled memory (TCM) which is accessible by the CPU in a single cycle. It also frees up room in the corresponding cache for intermittent data. Loading from external flash is slow! The data cache is also now enabled. Adds support for the iMX RT 1021 chip. Adds three new boards: * iMX RT 1020 EVK * iMX RT 1060 EVK * Teensy 4.0 Related to #2492, #2472 and #2477. Fixes #2475.
2020-01-08 23:32:45 -05:00
change board dicts to include a common macro with __name__
2021-09-03 09:16:33 -04:00
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
add board.ID
2021-08-13 18:51:09 -04:00
Refine iMX RT memory layout and add three boards Introduces a way to place CircuitPython code and data into tightly coupled memory (TCM) which is accessible by the CPU in a single cycle. It also frees up room in the corresponding cache for intermittent data. Loading from external flash is slow! The data cache is also now enabled. Adds support for the iMX RT 1021 chip. Adds three new boards: * iMX RT 1020 EVK * iMX RT 1060 EVK * Teensy 4.0 Related to #2492, #2472 and #2477. Fixes #2475.
2020-01-08 23:32:45 -05:00
// With USB on left. Bottom edge.
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO_AD_B0_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_AD_B0_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX1), MP_ROM_PTR(&pin_GPIO_AD_B0_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO_AD_B0_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_AD_B0_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX1), MP_ROM_PTR(&pin_GPIO_AD_B0_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO_EMC_04)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO_EMC_05)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO_EMC_06)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO_EMC_08)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO_B0_10)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO_B1_01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO_B1_00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO_B0_11)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO_B0_00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO_B0_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO_B0_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO_B0_01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO_B0_01)},
Refine iMX RT memory layout and add three boards Introduces a way to place CircuitPython code and data into tightly coupled memory (TCM) which is accessible by the CPU in a single cycle. It also frees up room in the corresponding cache for intermittent data. Loading from external flash is slow! The data cache is also now enabled. Adds support for the iMX RT 1021 chip. Adds three new boards: * iMX RT 1020 EVK * iMX RT 1060 EVK * Teensy 4.0 Related to #2492, #2472 and #2477. Fixes #2475.
2020-01-08 23:32:45 -05:00
// Top edge
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO_B0_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO_B0_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO_B0_03)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO_AD_B1_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO_AD_B1_02)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO_AD_B1_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO_AD_B1_03)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO_AD_B1_07)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO_AD_B1_07)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO_AD_B1_06)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO_AD_B1_06)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO_AD_B1_01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO_AD_B1_01)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO_AD_B1_01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SDA0), MP_ROM_PTR(&pin_GPIO_AD_B1_01)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D19), MP_ROM_PTR(&pin_GPIO_AD_B1_00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO_AD_B1_00)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO_AD_B1_00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SCL0), MP_ROM_PTR(&pin_GPIO_AD_B1_00)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D20), MP_ROM_PTR(&pin_GPIO_AD_B1_10)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO_AD_B1_10)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D21), MP_ROM_PTR(&pin_GPIO_AD_B1_11)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO_AD_B1_11)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D22), MP_ROM_PTR(&pin_GPIO_AD_B1_08)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_GPIO_AD_B1_08)},
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D23), MP_ROM_PTR(&pin_GPIO_AD_B1_09)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_GPIO_AD_B1_09)},
Refine iMX RT memory layout and add three boards Introduces a way to place CircuitPython code and data into tightly coupled memory (TCM) which is accessible by the CPU in a single cycle. It also frees up room in the corresponding cache for intermittent data. Loading from external flash is slow! The data cache is also now enabled. Adds support for the iMX RT 1021 chip. Adds three new boards: * iMX RT 1020 EVK * iMX RT 1060 EVK * Teensy 4.0 Related to #2492, #2472 and #2477. Fixes #2475.
2020-01-08 23:32:45 -05:00
// Back side
Add to board object other Serial and I2c pin names While testing out this and the new MicroMod Teensy port, @mjs513 and myself found it desirable to have logical pin names for the different Serial UART objects. It is a lot easier and clearer to use and maintain to do something like: uart4 = busio.UART(board.TX4, board.RX4) than have to go look up the pin numbers for each board.
2022-04-10 08:39:43 -04:00
{MP_OBJ_NEW_QSTR(MP_QSTR_D24), MP_ROM_PTR(&pin_GPIO_AD_B0_12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_GPIO_AD_B0_12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO_AD_B0_13)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_GPIO_AD_B0_13)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_GPIO_AD_B1_14)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_GPIO_AD_B1_14)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D27), MP_ROM_PTR(&pin_GPIO_AD_B1_15)},
{MP_OBJ_NEW_QSTR(MP_QSTR_A13), MP_ROM_PTR(&pin_GPIO_AD_B1_15)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D28), MP_ROM_PTR(&pin_GPIO_EMC_32)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D29), MP_ROM_PTR(&pin_GPIO_EMC_31)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_GPIO_EMC_37)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_GPIO_EMC_36)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_GPIO_B0_12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_GPIO_EMC_07)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D34), MP_ROM_PTR(&pin_GPIO_SD_B0_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_DAT1), MP_ROM_PTR(&pin_GPIO_SD_B0_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO_SD_B0_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_DAT0), MP_ROM_PTR(&pin_GPIO_SD_B0_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO_SD_B0_01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_CLK), MP_ROM_PTR(&pin_GPIO_SD_B0_01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO_SD_B0_00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_CMD), MP_ROM_PTR(&pin_GPIO_SD_B0_00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO_SD_B0_04)},
{MP_OBJ_NEW_QSTR(MP_QSTR_DAT3), MP_ROM_PTR(&pin_GPIO_SD_B0_04)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO_SD_B0_05)},
{MP_OBJ_NEW_QSTR(MP_QSTR_DAT2), MP_ROM_PTR(&pin_GPIO_SD_B0_05)},
{MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj)},
{MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj)},
{MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj)},
// other i2c ports defined
{MP_OBJ_NEW_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_GPIO_AD_B1_06)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_GPIO_AD_B1_07)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_GPIO_AD_B0_13)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_GPIO_AD_B0_12)},
// Serial Pins
{MP_OBJ_NEW_QSTR(MP_QSTR_RX2), MP_ROM_PTR(&pin_GPIO_B1_01)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX2), MP_ROM_PTR(&pin_GPIO_B1_00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX3), MP_ROM_PTR(&pin_GPIO_AD_B1_03)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX3), MP_ROM_PTR(&pin_GPIO_AD_B1_02)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX4), MP_ROM_PTR(&pin_GPIO_AD_B1_07)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX4), MP_ROM_PTR(&pin_GPIO_AD_B1_06)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX5), MP_ROM_PTR(&pin_GPIO_AD_B1_11)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX5), MP_ROM_PTR(&pin_GPIO_AD_B1_10)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX6), MP_ROM_PTR(&pin_GPIO_AD_B0_13)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX6), MP_ROM_PTR(&pin_GPIO_AD_B0_12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX7), MP_ROM_PTR(&pin_GPIO_EMC_32)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX7), MP_ROM_PTR(&pin_GPIO_EMC_31)},
{MP_OBJ_NEW_QSTR(MP_QSTR_RX8), MP_ROM_PTR(&pin_GPIO_B1_13)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX8), MP_ROM_PTR(&pin_GPIO_B1_12)},
Refine iMX RT memory layout and add three boards Introduces a way to place CircuitPython code and data into tightly coupled memory (TCM) which is accessible by the CPU in a single cycle. It also frees up room in the corresponding cache for intermittent data. Loading from external flash is slow! The data cache is also now enabled. Adds support for the iMX RT 1021 chip. Adds three new boards: * iMX RT 1020 EVK * iMX RT 1060 EVK * Teensy 4.0 Related to #2492, #2472 and #2477. Fixes #2475.
2020-01-08 23:32:45 -05:00
};
change board dicts to include a common macro with __name__
2021-09-03 09:16:33 -04:00
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
Reference in New Issue Copy Permalink