circuitpython/ports/atmel-samd/mpconfigport.mk

# All linking can be done with this common templated linker script, which has
# parameters that vary based on chip and/or board.
LD_TEMPLATE_FILE = boards/common.template.ld

# Define an equivalent for MICROPY_LONGINT_IMPL, to pass to $(MPY-TOOL) in py/mkrules.mk
# $(MPY-TOOL) needs to know what kind of longint to use (if any) to freeze long integers.
# This should correspond to the MICROPY_LONGINT_IMPL definition in mpconfigport.h.

ifeq ($(LONGINT_IMPL),NONE)
MPY_TOOL_LONGINT_IMPL = -mlongint-impl=none
endif

ifeq ($(LONGINT_IMPL),MPZ)
MPY_TOOL_LONGINT_IMPL = -mlongint-impl=mpz
endif

ifeq ($(LONGINT_IMPL),LONGLONG)
MPY_TOOL_LONGINT_IMPL = -mlongint-impl=longlong
endif

# Put samd21-only choices here.
ifeq ($(CHIP_FAMILY),samd21)
# frequencyio not yet verified as working on SAMD21, though make it possible to override.
ifndef CIRCUITPY_AUDIOMIXER
CIRCUITPY_AUDIOMIXER = 0
endif

ifndef CIRCUITPY_AUDIOMP3
CIRCUITPY_AUDIOMP3 = 0
endif

ifndef CIRCUITPY_FREQUENCYIO
CIRCUITPY_FREQUENCYIO = 0
endif

ifndef CIRCUITPY_TOUCHIO_USE_NATIVE
CIRCUITPY_TOUCHIO_USE_NATIVE = 1
endif

# No room for HCI _bleio on SAMD21.
CIRCUITPY_BLEIO_HCI = 0

CIRCUITPY_SDCARDIO ?= 0

# Not enough RAM for framebuffers
CIRCUITPY_FRAMEBUFFERIO ?= 0

# SAMD21 needs separate endpoint pairs for MSC BULK IN and BULK OUT, otherwise it's erratic.
USB_MSC_EP_NUM_OUT = 1

CIRCUITPY_ULAB = 0

ifeq ($(TRANSLATION), ja)
RELEASE_NEEDS_CLEAN_BUILD = 1
CIRCUITPY_TERMINALIO = 0
endif

ifeq ($(TRANSLATION), ko)
RELEASE_NEEDS_CLEAN_BUILD = 1
CIRCUITPY_TERMINALIO = 0
endif

endif # samd21

# Put samd51-only choices here.
ifeq ($(CHIP_FAMILY),samd51)
# No native touchio on SAMD51.
CIRCUITPY_TOUCHIO_USE_NATIVE = 0

# The ifndef's allow overriding in mpconfigboard.mk.

ifndef CIRCUITPY_NETWORK
CIRCUITPY_NETWORK = 0
endif

ifndef CIRCUITPY_PS2IO
CIRCUITPY_PS2IO = 1
endif

ifndef CIRCUITPY_SAMD
CIRCUITPY_SAMD = 1
endif

ifndef CIRCUITPY_RGBMATRIX
CIRCUITPY_RGBMATRIX = $(CIRCUITPY_FULL_BUILD)
endif

ifndef CIRCUITPY_FRAMEBUFFERIO
CIRCUITPY_FRAMEBUFFERIO = $(CIRCUITPY_FULL_BUILD)
endif

endif # samd51

INTERNAL_LIBM = 1

USB_SERIAL_NUMBER_LENGTH = 32

USB_NUM_EP = 8
Parameterize linker script 2019-10-20 23:50:12 -04:00			`# All linking can be done with this common templated linker script, which has`
			`# parameters that vary based on chip and/or board.`
			`LD_TEMPLATE_FILE = boards/common.template.ld`

Fix problems that prevented use of internal frozen modules: 1. Allow -Wlto-type-mismatch to be just a warning when building with frozen modules. 2. Fix extern decls that triggered -Wnested-externs when building with frozen modules. 3. Pass the correct value of -mlongint-impl to $(MPY_TOOL). New file mpconfigport.mk to do this. 2017-07-15 17:03:24 -04:00			`# Define an equivalent for MICROPY_LONGINT_IMPL, to pass to $(MPY-TOOL) in py/mkrules.mk`
			`# $(MPY-TOOL) needs to know what kind of longint to use (if any) to freeze long integers.`
			`# This should correspond to the MICROPY_LONGINT_IMPL definition in mpconfigport.h.`
refactor longint settings; make crickit cpx build 2018-05-21 23:58:03 -04:00
make longint choice mechanism more readable 2018-05-22 08:04:14 -04:00			`ifeq ($(LONGINT_IMPL),NONE)`
Fix problems that prevented use of internal frozen modules: 1. Allow -Wlto-type-mismatch to be just a warning when building with frozen modules. 2. Fix extern decls that triggered -Wnested-externs when building with frozen modules. 3. Pass the correct value of -mlongint-impl to $(MPY_TOOL). New file mpconfigport.mk to do this. 2017-07-15 17:03:24 -04:00			`MPY_TOOL_LONGINT_IMPL = -mlongint-impl=none`
atmel-samd: Enable longints for M4 builds. Fixes #110 2017-10-31 18:46:42 -04:00			`endif`
Merge 2.1.0 changes into master. 2017-10-23 12:29:17 -04:00
make longint choice mechanism more readable 2018-05-22 08:04:14 -04:00			`ifeq ($(LONGINT_IMPL),MPZ)`
atmel-samd: Enable longints for M4 builds. Fixes #110 2017-10-31 18:46:42 -04:00			`MPY_TOOL_LONGINT_IMPL = -mlongint-impl=mpz`
			`endif`
Merge 2.1.0 changes into master. 2017-10-23 12:29:17 -04:00
LONGLONG typo 2018-05-22 09:35:29 -04:00			`ifeq ($(LONGINT_IMPL),LONGLONG)`
refactor longint settings; make crickit cpx build 2018-05-21 23:58:03 -04:00			`MPY_TOOL_LONGINT_IMPL = -mlongint-impl=longlong`
			`endif`

turn off frequencyio for all SAMD21 builds 2019-03-27 17:54:36 -04:00			`# Put samd21-only choices here.`
copy/paste error 2019-03-27 18:19:39 -04:00			`ifeq ($(CHIP_FAMILY),samd21)`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`# frequencyio not yet verified as working on SAMD21, though make it possible to override.`
			`ifndef CIRCUITPY_AUDIOMIXER`
disable 'audiomixer' for all M0 boards 2019-09-01 18:39:20 -04:00			`CIRCUITPY_AUDIOMIXER = 0`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`endif`

audiocore: Add MP3File using Adafruit_MP3 library 2019-11-26 10:29:55 -05:00			`ifndef CIRCUITPY_AUDIOMP3`
			`CIRCUITPY_AUDIOMP3 = 0`
			`endif`

change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`ifndef CIRCUITPY_FREQUENCYIO`
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space. 2019-07-17 15:02:15 -04:00			`CIRCUITPY_FREQUENCYIO = 0`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`endif`

			`ifndef CIRCUITPY_TOUCHIO_USE_NATIVE`
make nrf touchio be generic: now available for SAMD51 too 2019-08-18 08:44:10 -04:00			`CIRCUITPY_TOUCHIO_USE_NATIVE = 1`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`endif`
use only one endpoint pair for MSC except on SAMD21 2019-09-04 21:45:16 -04:00
enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit 2020-10-15 11:15:48 -04:00			`# No room for HCI _bleio on SAMD21.`
			`CIRCUITPY_BLEIO_HCI = 0`

sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons. 2020-05-06 12:04:53 -04:00			`CIRCUITPY_SDCARDIO ?= 0`

atmel-samd: disable FRAMEBUFFERIO on samd21 .. this disables SHARPMEMORY as well. 2020-08-12 11:46:56 -04:00			`# Not enough RAM for framebuffers`
			`CIRCUITPY_FRAMEBUFFERIO ?= 0`

use only one endpoint pair for MSC except on SAMD21 2019-09-04 21:45:16 -04:00			`# SAMD21 needs separate endpoint pairs for MSC BULK IN and BULK OUT, otherwise it's erratic.`
Add an alternative way to number the USB endpoints Two options available: - relative numbering (USB_RELATIVE_EP_NUM = 1) - default - absolute numbering (USB_RELATIVE_EP_NUM = 0) - new! 2019-10-01 04:00:32 -04:00			`USB_MSC_EP_NUM_OUT = 1`
wip 2019-12-05 22:45:53 -05:00
ulab: rename enable macro so it appears in the support matrix 2020-03-17 10:33:03 -04:00			`CIRCUITPY_ULAB = 0`
ulab: don't enable on m0 boards 2020-03-10 00:00:21 -04:00
Turn off terminalio for ja and ko The font is missing many characters and the build needs the space. We can optimize font storage when we get a good font. The serial output will work as usual. 2020-08-17 20:17:59 -04:00			`ifeq ($(TRANSLATION), ja)`
			`RELEASE_NEEDS_CLEAN_BUILD = 1`
			`CIRCUITPY_TERMINALIO = 0`
			`endif`

			`ifeq ($(TRANSLATION), ko)`
			`RELEASE_NEEDS_CLEAN_BUILD = 1`
			`CIRCUITPY_TERMINALIO = 0`
			`endif`

wip 2019-12-05 22:45:53 -05:00			`endif # samd21`
turn off frequencyio for all SAMD21 builds 2019-03-27 17:54:36 -04:00
correct weak module links; samd module only in m4 ports; update libraries 2019-02-17 23:48:08 -05:00			`# Put samd51-only choices here.`
			`ifeq ($(CHIP_FAMILY),samd51)`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`# No native touchio on SAMD51.`
make nrf touchio be generic: now available for SAMD51 too 2019-08-18 08:44:10 -04:00			`CIRCUITPY_TOUCHIO_USE_NATIVE = 0`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00
cosmetic commit, mostly to re-run 2019-11-22 16:30:10 -05:00			`# The ifndef's allow overriding in mpconfigboard.mk.`

change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`ifndef CIRCUITPY_NETWORK`
Disable existing native networking. We're moving towards a co-processor model and a Wiznet library is already available. New native APIs will replace these for chips with networking like the ESP32S2 but they won't be these. 2020-07-17 20:43:02 -04:00			`CIRCUITPY_NETWORK = 0`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`endif`

			`ifndef CIRCUITPY_PS2IO`
enable network, wiznet5k, and ps2io by default on M4 2019-11-22 10:59:27 -05:00			`CIRCUITPY_PS2IO = 1`
correct weak module links; samd module only in m4 ports; update libraries 2019-02-17 23:48:08 -05:00			`endif`

change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`ifndef CIRCUITPY_SAMD`
correct weak module links; samd module only in m4 ports; update libraries 2019-02-17 23:48:08 -05:00			`CIRCUITPY_SAMD = 1`
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00			`endif`

RGBMatrix: finish renaming from Protomatter This gets all the purely internal references. Some uses of protomatter/Protomatter/PROTOMATTER remain, as they are references to symbols in the Protomatter C library itself. 2020-04-15 16:01:24 -04:00			`ifndef CIRCUITPY_RGBMATRIX`
Minor redundancy fix 2020-04-23 17:12:55 -04:00			`CIRCUITPY_RGBMATRIX = $(CIRCUITPY_FULL_BUILD)`
Add Protomatter and FramebufferDisplay 2020-03-10 14:12:01 -04:00			`endif`

			`ifndef CIRCUITPY_FRAMEBUFFERIO`
Minor redundancy fix 2020-04-23 17:12:55 -04:00			`CIRCUITPY_FRAMEBUFFERIO = $(CIRCUITPY_FULL_BUILD)`
Add Protomatter and FramebufferDisplay 2020-03-10 14:12:01 -04:00			`endif`

wip 2019-12-05 22:45:53 -05:00			`endif # samd51`
correct weak module links; samd module only in m4 ports; update libraries 2019-02-17 23:48:08 -05:00
atmel-samd: Enable longints for M4 builds. Fixes #110 2017-10-31 18:46:42 -04:00			`INTERNAL_LIBM = 1`
Makefile & mpconfigport for atmel-samd with wiznet 2018-10-04 07:59:25 -04:00
Move atmel-samd to tinyusb and support nRF flash. This started while adding USB MIDI support (and descriptor support is in this change.) When seeing that I'd have to implement the MIDI class logic twice, once for atmel-samd and once for nrf, I decided to refactor the USB stack so its shared across ports. This has led to a number of changes that remove items from the ports folder and move them into supervisor. Furthermore, we had external SPI flash support for nrf pending so I factored out the connection between the usb stack and the flash API as well. This PR also includes the QSPI support for nRF. 2018-10-19 21:46:22 -04:00			`USB_SERIAL_NUMBER_LENGTH = 32`
Add usb-endpoint-count checking .. however, the number of endpoints is only set for SAMD (8). Other ports need to set the value. Otherwise, the build will show the message ``` Unable to check whether maximum number of endpoints is respected ``` 2020-08-19 17:47:20 -04:00
			`USB_NUM_EP = 8`