circuitpython/stm/led.c

165 lines
4.1 KiB
C
Raw Normal View History

#include <stdio.h>
#include <stm32f4xx.h>
#include <stm32f4xx_gpio.h>
#include "misc.h"
#include "mpconfig.h"
#include "qstr.h"
#include "obj.h"
#include "led.h"
/* LED numbers, used internally */
2014-01-06 17:17:37 -05:00
#define PYB_LED_1 (1)
#define PYB_LED_2 (2)
#define PYB_LED_3 (3)
#define PYB_LED_4 (4)
void led_init(void) {
/* GPIO structure */
GPIO_InitTypeDef GPIO_InitStructure;
/* Configure I/O speed, mode, output type and pull */
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_InitStructure.GPIO_OType = PYB_OTYPE;
/* Turn off LEDs */
PYB_LED_OFF(PYB_LED1_PORT, PYB_LED1_PIN);
PYB_LED_OFF(PYB_LED2_PORT, PYB_LED2_PIN);
PYB_LED_OFF(PYB_LED3_PORT, PYB_LED3_PIN);
PYB_LED_OFF(PYB_LED4_PORT, PYB_LED4_PIN);
/* Initialize LEDs */
GPIO_InitStructure.GPIO_Pin = PYB_LED1_PIN;
GPIO_Init(PYB_LED1_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = PYB_LED2_PIN;
GPIO_Init(PYB_LED2_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = PYB_LED3_PIN;
GPIO_Init(PYB_LED3_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = PYB_LED4_PIN;
GPIO_Init(PYB_LED4_PORT, &GPIO_InitStructure);
}
void led_state(pyb_led_t led, int state) {
GPIO_TypeDef *port;
uint32_t pin;
switch (led) {
case PYB_LED_1:
pin = PYB_LED1_PIN;
port = PYB_LED1_PORT;
break;
case PYB_LED_2:
pin = PYB_LED2_PIN;
port = PYB_LED2_PORT;
break;
case PYB_LED_3:
pin = PYB_LED3_PIN;
port = PYB_LED3_PORT;
break;
case PYB_LED_4:
pin = PYB_LED4_PIN;
port = PYB_LED4_PORT;
break;
default:
return;
}
if (state == 0) {
// turn LED off
PYB_LED_OFF(port, pin);
} else {
// turn LED on
PYB_LED_ON(port, pin);
}
}
void led_toggle(pyb_led_t led) {
GPIO_TypeDef *port;
uint32_t pin;
switch (led) {
case PYB_LED_1:
pin = PYB_LED1_PIN;
port = PYB_LED1_PORT;
break;
case PYB_LED_2:
pin = PYB_LED2_PIN;
port = PYB_LED2_PORT;
break;
case PYB_LED_3:
pin = PYB_LED3_PIN;
port = PYB_LED3_PORT;
break;
case PYB_LED_4:
pin = PYB_LED4_PIN;
port = PYB_LED4_PORT;
break;
default:
return;
}
// XXX this assumes LED is driven by a low MCU output (true for PYBv3, false for PYBv4)
if (!(port->ODR & pin)) {
// turn LED off
PYB_LED_OFF(port, pin);
} else {
// turn LED on (output low)
PYB_LED_ON(port, pin);
}
}
/******************************************************************************/
/* Micro Python bindings */
typedef struct _pyb_led_obj_t {
mp_obj_base_t base;
uint led_id;
} pyb_led_obj_t;
void led_obj_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
pyb_led_obj_t *self = self_in;
print(env, "<LED %lu>", self->led_id);
}
mp_obj_t led_obj_on(mp_obj_t self_in) {
pyb_led_obj_t *self = self_in;
led_state(self->led_id, 1);
return mp_const_none;
}
mp_obj_t led_obj_off(mp_obj_t self_in) {
pyb_led_obj_t *self = self_in;
led_state(self->led_id, 0);
return mp_const_none;
}
static MP_DEFINE_CONST_FUN_OBJ_1(led_obj_on_obj, led_obj_on);
static MP_DEFINE_CONST_FUN_OBJ_1(led_obj_off_obj, led_obj_off);
static const mp_method_t led_methods[] = {
{ "on", &led_obj_on_obj },
{ "off", &led_obj_off_obj },
{ NULL, NULL },
};
static const mp_obj_type_t led_obj_type = {
{ &mp_type_type },
.name = MP_QSTR_Led,
.print = led_obj_print,
.methods = led_methods,
};
static mp_obj_t pyb_Led(mp_obj_t led_id) {
pyb_led_obj_t *o = m_new_obj(pyb_led_obj_t);
o->base.type = &led_obj_type;
o->led_id = mp_obj_get_int(led_id);
return o;
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_Led_obj, pyb_Led);