circuitpython/ports/espressif/mpconfigport.mk

# Use internal flash for CIRCUITPY drive
INTERNAL_FLASH_FILESYSTEM = 1

# Internal math library is substantially smaller than toolchain one
INTERNAL_LIBM = 1

# Longints can be implemented as mpz, as longlong, or not
LONGINT_IMPL = MPZ

# Enable more features
CIRCUITPY_FULL_BUILD ?= 1

# These modules are implemented in ports/<port>/common-hal:
CIRCUITPY_ALARM ?= 1
CIRCUITPY_ANALOGBUFIO ?= 1
CIRCUITPY_AUDIOBUSIO ?= 1
CIRCUITPY_AUDIOBUSIO_I2SOUT ?= 1
CIRCUITPY_AUDIOBUSIO_PDMIN ?= 0
CIRCUITPY_AUDIOCORE ?= 1
CIRCUITPY_AUDIOIO ?= 0
CIRCUITPY_AUDIOMIXER ?= 1
CIRCUITPY_AUDIOMP3 ?= 0
CIRCUITPY_BLEIO ?= 1
CIRCUITPY_BLEIO_HCI = 0
CIRCUITPY_CANIO ?= 1
CIRCUITPY_COUNTIO ?= 1
CIRCUITPY_DUALBANK ?= 1
CIRCUITPY_ESPCAMERA ?= 1
CIRCUITPY_ESPIDF ?= 1
CIRCUITPY_ESPULP ?= 1
CIRCUITPY_FRAMEBUFFERIO ?= 1
CIRCUITPY_FREQUENCYIO ?= 1
CIRCUITPY_HASHLIB ?= 1
CIRCUITPY_I2CTARGET ?= 1
CIRCUITPY_IMAGECAPTURE = 0
CIRCUITPY_MEMORYMAP ?= 1
CIRCUITPY_NVM ?= 1
CIRCUITPY_PS2IO ?= 1
CIRCUITPY_RGBMATRIX ?= 1
CIRCUITPY_ROTARYIO ?= 1
CIRCUITPY_TOUCHIO_USE_NATIVE ?= 1
CIRCUITPY_WATCHDOG ?= 1
CIRCUITPY_WIFI ?= 1

# Conditionally turn off modules/features
ifeq ($(IDF_TARGET),esp32)
# Modules
CIRCUITPY_BLEIO = 0
CIRCUITPY_PARALLELDISPLAY = 0
CIRCUITPY_RGBMATRIX = 0
# Features
CIRCUITPY_USB = 0

else ifeq ($(IDF_TARGET),esp32c3)
# Modules
CIRCUITPY_ALARM = 0
CIRCUITPY_AUDIOBUSIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_ESPCAMERA = 0
CIRCUITPY_ESPULP = 0
CIRCUITPY_FREQUENCYIO = 0
CIRCUITPY_MEMORYMAP = 0
CIRCUITPY_PARALLELDISPLAY = 0
CIRCUITPY_ROTARYIO = 0
CIRCUITPY_TOUCHIO ?= 1
CIRCUITPY_TOUCHIO_USE_NATIVE = 0
# Features
CIRCUITPY_USB = 0

else ifeq ($(IDF_TARGET),esp32s2)
# Modules
CIRCUITPY_BLEIO = 0
CIRCUITPY_RGBMATRIX_USES_SUPERVISOR_ALLOCATION = 0

else ifeq ($(IDF_TARGET),esp32s3)
# Modules
CIRCUITPY_PARALLELDISPLAY = 0
CIRCUITPY_RGBMATRIX_USES_SUPERVISOR_ALLOCATION = 0
endif

# No room for dualbank on boards with 2MB flash
ifeq ($(CIRCUITPY_ESP_FLASH_SIZE),2MB)
CIRCUITPY_DUALBANK = 0
endif

# Modules dependent on other modules
CIRCUITPY_ESPNOW ?= $(CIRCUITPY_WIFI)
CIRCUITPY_GIFIO ?= $(CIRCUITPY_ESPCAMERA)
CIRCUITPY_QRIO ?= $(CIRCUITPY_ESPCAMERA)

# Features dependent on other features
ifneq ($(CIRCUITPY_USB),0)
CIRCUITPY_BUILD_EXTENSIONS ?= bin,uf2
else
CIRCUITPY_BUILD_EXTENSIONS ?= bin
endif

# From ESP32-S2/S3 Technical Reference Manual:
#
# Endpoint number 0 always present (bi-directional, consisting of EP0 IN and EP0 OUT)
# Six additional endpoints (endpoint numbers 1 to 6), configurable as IN or OUT
# Maximum of five IN endpoints concurrently active at any time (including EP0 IN)
#
# Due to the limited number of endpoints, some USB devices will be off by default.
# For instance MIDI is available, but the device is turned off. It can be turned on
# only if something else is turned off, such as HID.
USB_NUM_ENDPOINT_PAIRS = 7
USB_NUM_IN_ENDPOINTS = 5
cleanup `mpconfigboard.mk` of espressif boards - move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk` - move `LONGINT_IMPL` to `mpconfigport.mk` - move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile` 2022-10-06 06:35:33 -04:00			`# Use internal flash for CIRCUITPY drive`
			`INTERNAL_FLASH_FILESYSTEM = 1`

Initial ESP32S2 port. Basic blinky works but doesn't check pins. 2020-04-17 19:23:28 -04:00			`# Internal math library is substantially smaller than toolchain one`
			`INTERNAL_LIBM = 1`

			`# Longints can be implemented as mpz, as longlong, or not`
			`LONGINT_IMPL = MPZ`

reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# Enable more features`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_FULL_BUILD ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00
			`# These modules are implemented in ports/<port>/common-hal:`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_ALARM ?= 1`
Espressif analogbufio implementation 2023-02-17 08:49:15 -05:00			`CIRCUITPY_ANALOGBUFIO ?= 1`
Moved CIRCUITPY_ANALOGBUFIO flag to correct place in alphabetical order 2023-02-17 13:20:41 -05:00			`CIRCUITPY_AUDIOBUSIO ?= 1`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_AUDIOBUSIO_I2SOUT ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_AUDIOBUSIO_PDMIN ?= 0`
			`CIRCUITPY_AUDIOCORE ?= 1`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_AUDIOIO ?= 0`
			`CIRCUITPY_AUDIOMIXER ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_AUDIOMP3 ?= 0`
			`CIRCUITPY_BLEIO ?= 1`
			`CIRCUITPY_BLEIO_HCI = 0`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_CANIO ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_COUNTIO ?= 1`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_DUALBANK ?= 1`
move `esp32_camera` to `espcamera` 2023-01-27 11:28:37 -05:00			`CIRCUITPY_ESPCAMERA ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_ESPIDF ?= 1`
add ulp fsm 2023-01-21 05:32:59 -05:00			`CIRCUITPY_ESPULP ?= 1`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_FRAMEBUFFERIO ?= 1`
			`CIRCUITPY_FREQUENCYIO ?= 1`
WIP websocket accept and hashlib 2022-06-29 19:31:55 -04:00			`CIRCUITPY_HASHLIB ?= 1`
Change I2C terminology from "peripheral" to "target" 2022-08-09 13:06:18 -04:00			`CIRCUITPY_I2CTARGET ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_IMAGECAPTURE = 0`
add ulp fsm 2023-01-21 05:32:59 -05:00			`CIRCUITPY_MEMORYMAP ?= 1`
Update the idf to a newer 4.3 commit Also, make all port-level CIRCUITPY_ settings overridable. 2021-08-27 13:47:03 -04:00			`CIRCUITPY_NVM ?= 1`
merge from upstream; complicated webusb merge 2021-02-11 18:50:02 -05:00			`CIRCUITPY_PS2IO ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_RGBMATRIX ?= 1`
			`CIRCUITPY_ROTARYIO ?= 1`
merge from upstream; complicated webusb merge 2021-02-11 18:50:02 -05:00			`CIRCUITPY_TOUCHIO_USE_NATIVE ?= 1`
watchdog implementation for esp32s2 2020-11-10 06:02:46 -05:00			`CIRCUITPY_WATCHDOG ?= 1`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_WIFI ?= 1`
ps2io implementation for esp32s2 2020-11-18 02:04:56 -05:00
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# Conditionally turn off modules/features`
wip 2022-06-23 15:59:06 -04:00			`ifeq ($(IDF_TARGET),esp32)`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# Modules`
wip 2022-06-23 15:59:06 -04:00			`CIRCUITPY_BLEIO = 0`
wip; compiles 2022-06-26 17:45:35 -04:00			`CIRCUITPY_PARALLELDISPLAY = 0`
			`CIRCUITPY_RGBMATRIX = 0`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# Features`
wip 2022-06-23 15:59:06 -04:00			`CIRCUITPY_USB = 0`

			`else ifeq ($(IDF_TARGET),esp32c3)`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# Modules`
add initial esp32c3 support 2021-09-25 14:30:00 -04:00			`CIRCUITPY_ALARM = 0`
Formatting and shrink build size on C3 2022-03-18 15:05:54 -04:00			`CIRCUITPY_AUDIOBUSIO = 0`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`CIRCUITPY_COUNTIO = 0`
move `esp32_camera` to `espcamera` 2023-01-27 11:28:37 -05:00			`CIRCUITPY_ESPCAMERA = 0`
add ulp fsm 2023-01-21 05:32:59 -05:00			`CIRCUITPY_ESPULP = 0`
add initial esp32c3 support 2021-09-25 14:30:00 -04:00			`CIRCUITPY_FREQUENCYIO = 0`
add ulp fsm 2023-01-21 05:32:59 -05:00			`CIRCUITPY_MEMORYMAP = 0`
add initial esp32c3 support 2021-09-25 14:30:00 -04:00			`CIRCUITPY_PARALLELDISPLAY = 0`
Formatting and shrink build size on C3 2022-03-18 15:05:54 -04:00			`CIRCUITPY_ROTARYIO = 0`
add initial esp32c3 support 2021-09-25 14:30:00 -04:00			`CIRCUITPY_TOUCHIO ?= 1`
			`CIRCUITPY_TOUCHIO_USE_NATIVE = 0`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# Features`
Formatting and shrink build size on C3 2022-03-18 15:05:54 -04:00			`CIRCUITPY_USB = 0`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00
			`else ifeq ($(IDF_TARGET),esp32s2)`
			`# Modules`
			`CIRCUITPY_BLEIO = 0`
rgbmatrix: update protomatter and re-organize so that esp32 s2/s3 don't do as much at reset .. it's not necessary (because most data is in esp-idf managed memory) and doing this saves me from having to debug why reconstruct isn't working properly on that platform. This needs to be tested on other platforms again before being merged! 2023-06-05 11:36:31 -04:00			`CIRCUITPY_RGBMATRIX_USES_SUPERVISOR_ALLOCATION = 0`
wip 2022-06-23 15:59:06 -04:00
update espressif port - update esp-idf to v4.4 - add esp32s3 support - add analogio on esp32c3 - disable rgbmatrix on all espressif soc Co-authored-by: Scott Shawcroft <scott@adafruit.com> Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com> 2021-11-23 13:30:00 -05:00			`else ifeq ($(IDF_TARGET),esp32s3)`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# Modules`
update espressif port - update esp-idf to v4.4 - add esp32s3 support - add analogio on esp32c3 - disable rgbmatrix on all espressif soc Co-authored-by: Scott Shawcroft <scott@adafruit.com> Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com> 2021-11-23 13:30:00 -05:00			`CIRCUITPY_PARALLELDISPLAY = 0`
rgbmatrix: update protomatter and re-organize so that esp32 s2/s3 don't do as much at reset .. it's not necessary (because most data is in esp-idf managed memory) and doing this saves me from having to debug why reconstruct isn't working properly on that platform. This needs to be tested on other platforms again before being merged! 2023-06-05 11:36:31 -04:00			`CIRCUITPY_RGBMATRIX_USES_SUPERVISOR_ALLOCATION = 0`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`endif`
wip 2022-06-23 15:59:06 -04:00
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`# No room for dualbank on boards with 2MB flash`
			`ifeq ($(CIRCUITPY_ESP_FLASH_SIZE),2MB)`
			`CIRCUITPY_DUALBANK = 0`
			`endif`

			`# Modules dependent on other modules`
minimal changes to make espnow work 2023-01-20 02:57:00 -05:00			`CIRCUITPY_ESPNOW ?= $(CIRCUITPY_WIFI)`
move `esp32_camera` to `espcamera` 2023-01-27 11:28:37 -05:00			`CIRCUITPY_GIFIO ?= $(CIRCUITPY_ESPCAMERA)`
			`CIRCUITPY_QRIO ?= $(CIRCUITPY_ESPCAMERA)`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00
			`# Features dependent on other features`
			`ifneq ($(CIRCUITPY_USB),0)`
list extensions instead of macros names ("bin,uf2" not BIN_UF2) the modules_support_matrix usees a dictionnary per board instead of a list optionally include the frozen modules URLs in it 2022-07-19 17:35:51 -04:00			`CIRCUITPY_BUILD_EXTENSIONS ?= bin,uf2`
reorganize espressif `mpconfigport.mk` 2022-10-21 07:43:19 -04:00			`else`
			`CIRCUITPY_BUILD_EXTENSIONS ?= bin`
no default extension for ESP, fix duplicate line in rp2 2022-07-20 21:52:15 -04:00			`endif`
Move build extensions to board directories - define CIRCUITPY_BUILD_EXTENSIONS to predefined values - set CIRCUITPY_BUILD_EXTENSIONS in port and board config - reuse the support matrix "get_settings_from_makefile" to get it - move the existing port and board specific values - remove the C3 specific board values because it's not the default - update build_release_files.py to use get_settings_from_makefile 2022-05-13 05:38:03 -04:00
update espressif port - update esp-idf to v4.4 - add esp32s3 support - add analogio on esp32c3 - disable rgbmatrix on all espressif soc Co-authored-by: Scott Shawcroft <scott@adafruit.com> Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com> 2021-11-23 13:30:00 -05:00			`# From ESP32-S2/S3 Technical Reference Manual:`
count in/out endpoints; allow more usb modules on low-endpoint boards 2021-05-13 21:49:04 -04:00			`#`
			`# Endpoint number 0 always present (bi-directional, consisting of EP0 IN and EP0 OUT)`
			`# Six additional endpoints (endpoint numbers 1 to 6), configurable as IN or OUT`
			`# Maximum of five IN endpoints concurrently active at any time (including EP0 IN)`
			`#`
			`# Due to the limited number of endpoints, some USB devices will be off by default.`
			`# For instance MIDI is available, but the device is turned off. It can be turned on`
			`# only if something else is turned off, such as HID.`
			`USB_NUM_ENDPOINT_PAIRS = 7`
			`USB_NUM_IN_ENDPOINTS = 5`