circuitpython/ports/atmel-samd/boards/feather_m0_express/mpconfigboard.h

49 lines
1.7 KiB
C
Raw Normal View History

#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Express"
2016-11-14 20:22:56 -05:00
#define MICROPY_HW_MCU_NAME "samd21g18"
#define MICROPY_HW_NEOPIXEL (&pin_PA06)
2016-11-14 20:22:56 -05:00
// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
#define SPI_FLASH_BAUDRATE (8000000)
2016-11-14 20:22:56 -05:00
#define SPI_FLASH_MOSI_PIN PIN_PA08
#define SPI_FLASH_MISO_PIN PIN_PA14
#define SPI_FLASH_SCK_PIN PIN_PA09
#define SPI_FLASH_CS_PIN PIN_PA13
#define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PA08D_SERCOM2_PAD0
#define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PA14C_SERCOM2_PAD2
#define SPI_FLASH_SCK_PIN_FUNCTION PINMUX_PA09D_SERCOM2_PAD1
#define SPI_FLASH_SERCOM SERCOM2
#define SPI_FLASH_SERCOM_INDEX 2
#define SPI_FLASH_MOSI_PAD 0
#define SPI_FLASH_MISO_PAD 2
#define SPI_FLASH_SCK_PAD 1
// <o> Transmit Data Pinout
// <0x0=>PAD[0,1]_DO_SCK
// <0x1=>PAD[2,3]_DO_SCK
// <0x2=>PAD[3,1]_DO_SCK
// <0x3=>PAD[0,3]_DO_SCK
#define SPI_FLASH_DOPO 0
#define SPI_FLASH_DIPO 2 // same as MISO pad
// These are pins not to reset.
#define MICROPY_PORT_A (PORT_PA06 | PORT_PA08 | PORT_PA09 | PORT_PA13 | PORT_PA14 | PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B ( 0 )
#define MICROPY_PORT_C ( 0 )
2018-02-17 03:29:03 -05:00
#include "external_flash/external_flash.h"
// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code.
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#include "external_flash/devices.h"
#define EXTERNAL_FLASH_DEVICE_COUNT 2
#define EXTERNAL_FLASH_DEVICES S25FL216K, \
GD25Q16C
#include "external_flash/external_flash.h"