circuitpython/ports/nrf/modules/machine/uart.c

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2013, 2014 Damien P. George
 * Copyright (c) 2015 Glenn Ruben Bakke
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <stdbool.h>
#include <string.h>
#include <stdarg.h>

#include "py/nlr.h"
#include "py/runtime.h"
#include "py/stream.h"
#include "py/mperrno.h"
#include "py/mphal.h"
#include "pin.h"
#include "genhdr/pins.h"

#include "uart.h"
#include "mpconfigboard.h"
#include "nrf.h"
#include "mphalport.h"
#include "hal_uart.h"

typedef struct _machine_hard_uart_obj_t {
    mp_obj_base_t base;
    UART_HandleTypeDef * uart;
    byte char_width;                    // 0 for 7,8 bit chars, 1 for 9 bit chars
} machine_hard_uart_obj_t;

UART_HandleTypeDef UARTHandle0 = {.p_instance = NULL, .init.id = 0};
#if NRF52840_XXAA
UART_HandleTypeDef UARTHandle1 = {.p_instance = NULL, .init.id = 1};
#endif

STATIC machine_hard_uart_obj_t machine_hard_uart_obj[] = {
    {{&machine_hard_uart_type}, &UARTHandle0},
#if NRF52840_XXAA
    {{&machine_hard_uart_type}, &UARTHandle1},
#endif
};

void uart_init0(void) {
    // reset the UART handles
    memset(&UARTHandle0, 0, sizeof(UART_HandleTypeDef));
    UARTHandle0.p_instance = UART_BASE(0);
    UARTHandle0.init.irq_num = UARTE0_UART0_IRQn;

#if NRF52840_XXAA
    memset(&UARTHandle1, 0, sizeof(UART_HandleTypeDef));
    UARTHandle0.p_instance = UART_BASE(1);
#endif
}

STATIC int uart_find(mp_obj_t id) {
    // given an integer id
    int uart_id = mp_obj_get_int(id);
    if (uart_id >= 0 && uart_id <= MP_ARRAY_SIZE(machine_hard_uart_obj)
        && machine_hard_uart_obj[uart_id].uart != NULL) {
        return uart_id;
    }
    nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError,
              "UART(%d) does not exist", uart_id));
}

//void uart_irq_handler(mp_uint_t uart_id) {
//
//}

bool uart_rx_any(machine_hard_uart_obj_t *uart_obj) {
    // TODO: uart will block for now.
    return hal_uart_available(uart_obj->uart->p_instance) > 0;
}

int uart_rx_char(machine_hard_uart_obj_t * self) {
    uint8_t ch;
    hal_uart_char_read(self->uart->p_instance, &ch);
    return (int)ch;
}

STATIC hal_uart_error_t uart_tx_char(machine_hard_uart_obj_t * self, int c) {
    return hal_uart_char_write(self->uart->p_instance, (char)c);
}


void uart_tx_strn(machine_hard_uart_obj_t *uart_obj, const char *str, uint len) {
    for (const char *top = str + len; str < top; str++) {
        uart_tx_char(uart_obj, *str);
    }
}

void uart_tx_strn_cooked(machine_hard_uart_obj_t *uart_obj, const char *str, uint len) {
    for (const char *top = str + len; str < top; str++) {
        if (*str == '\n') {
            uart_tx_char(uart_obj, '\r');
        }
        uart_tx_char(uart_obj, *str);
    }
}

/******************************************************************************/
/* MicroPython bindings                                                      */

STATIC void machine_hard_uart_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
}



/// \method init(baudrate, bits=8, parity=None, stop=1, *, timeout=1000, timeout_char=0, read_buf_len=64)
///
/// Initialise the UART bus with the given parameters:
///   - `id`is bus id.
///   - `baudrate` is the clock rate.
///   - `bits` is the number of bits per byte, 7, 8 or 9.
///   - `parity` is the parity, `None`, 0 (even) or 1 (odd).
///   - `stop` is the number of stop bits, 1 or 2.
///   - `timeout` is the timeout in milliseconds to wait for the first character.
///   - `timeout_char` is the timeout in milliseconds to wait between characters.
///   - `read_buf_len` is the character length of the read buffer (0 to disable).
STATIC mp_obj_t machine_hard_uart_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *all_args) {
    static const mp_arg_t allowed_args[] = {
        { MP_QSTR_id,       MP_ARG_REQUIRED | MP_ARG_OBJ },
        { MP_QSTR_baudrate, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 9600} },
        { MP_QSTR_bits, MP_ARG_INT, {.u_int = 8} },
        { MP_QSTR_parity, MP_ARG_OBJ, {.u_obj = mp_const_none} },
        { MP_QSTR_stop, MP_ARG_INT, {.u_int = 1} },
        { MP_QSTR_flow, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
        { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1000} },
        { MP_QSTR_timeout_char, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
        { MP_QSTR_read_buf_len, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 64} },
    };

    // parse args
    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
    mp_arg_parse_all_kw_array(n_args, n_kw, all_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);

    // get static peripheral object
    int uart_id = uart_find(args[0].u_obj);
    machine_hard_uart_obj_t * self = &machine_hard_uart_obj[uart_id];

    hal_uart_init_t * init = &self->uart->init;

    // flow control
    init->flow_control = args[5].u_int;

#if MICROPY_HW_UART1_HWFC
    init->flow_control = true;
#else
	init->flow_control = false;
#endif
	init->use_parity   = false;
#if (BLUETOOTH_SD == 100)
	init->irq_priority = 3;
#else
	init->irq_priority = 6;
#endif

    switch (args[1].u_int) {
        case 1200:
            init->baud_rate = HAL_UART_BAUD_1K2;
            break;
        case 2400:
            init->baud_rate = HAL_UART_BAUD_2K4;
            break;
        case 4800:
            init->baud_rate = HAL_UART_BAUD_4K8;
            break;
        case 9600:
            init->baud_rate = HAL_UART_BAUD_9K6;
            break;
        case 14400:
            init->baud_rate = HAL_UART_BAUD_14K4;
            break;
        case 19200:
            init->baud_rate = HAL_UART_BAUD_19K2;
            break;
        case 28800:
            init->baud_rate = HAL_UART_BAUD_28K8;
            break;
        case 38400:
            init->baud_rate = HAL_UART_BAUD_38K4;
            break;
        case 57600:
            init->baud_rate = HAL_UART_BAUD_57K6;
            break;
        case 76800:
            init->baud_rate = HAL_UART_BAUD_76K8;
            break;
        case 115200:
            init->baud_rate = HAL_UART_BAUD_115K2;
            break;
        case 230400:
            init->baud_rate = HAL_UART_BAUD_230K4;
            break;
        case 250000:
            init->baud_rate = HAL_UART_BAUD_250K0;
            break;
        case 500000:
            init->baud_rate = HAL_UART_BAUD_500K0;
            break;
        case 1000000:
            init->baud_rate = HAL_UART_BAUD_1M0;
            break;
        default:
            nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError,
                      "UART baudrate not supported, %ul", init->baud_rate));
            break;
    }

    init->rx_pin = &MICROPY_HW_UART1_RX;
    init->tx_pin = &MICROPY_HW_UART1_TX;

#if MICROPY_HW_UART1_HWFC
    init->rts_pin = &MICROPY_HW_UART1_RTS;
    init->cts_pin = &MICROPY_HW_UART1_CTS;
#endif

    hal_uart_init(self->uart->p_instance, init);

    return MP_OBJ_FROM_PTR(self);
}

/// \method writechar(char)
/// Write a single character on the bus.  `char` is an integer to write.
/// Return value: `None`.
STATIC mp_obj_t machine_hard_uart_writechar(mp_obj_t self_in, mp_obj_t char_in) {
    machine_hard_uart_obj_t *self = self_in;

    // get the character to write (might be 9 bits)
    uint16_t data = mp_obj_get_int(char_in);

    hal_uart_error_t err = 0;
    for (int i = 0; i < 2; i++) {
        err = uart_tx_char(self, (int)(&data)[i]);
    }

    HAL_StatusTypeDef status = self->uart->p_instance->EVENTS_ERROR;

    if (err != HAL_UART_ERROR_NONE) {
        mp_hal_raise(status);
    }

    return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_2(machine_hard_uart_writechar_obj, machine_hard_uart_writechar);

/// \method readchar()
/// Receive a single character on the bus.
/// Return value: The character read, as an integer.  Returns -1 on timeout.
STATIC mp_obj_t machine_hard_uart_readchar(mp_obj_t self_in) {
    machine_hard_uart_obj_t *self = self_in;
    return MP_OBJ_NEW_SMALL_INT(uart_rx_char(self));
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_hard_uart_readchar_obj, machine_hard_uart_readchar);

// uart.sendbreak()
STATIC mp_obj_t machine_hard_uart_sendbreak(mp_obj_t self_in) {
    return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_hard_uart_sendbreak_obj, machine_hard_uart_sendbreak);

STATIC const mp_rom_map_elem_t machine_hard_uart_locals_dict_table[] = {
    // instance methods
    /// \method read([nbytes])
    { MP_ROM_QSTR(MP_QSTR_read), MP_ROM_PTR(&mp_stream_read_obj) },
    /// \method readline()
    { MP_ROM_QSTR(MP_QSTR_readline), MP_ROM_PTR(&mp_stream_unbuffered_readline_obj) },
    /// \method readinto(buf[, nbytes])
    { MP_ROM_QSTR(MP_QSTR_readinto), MP_ROM_PTR(&mp_stream_readinto_obj) },
    /// \method writechar(buf)
    { MP_ROM_QSTR(MP_QSTR_writechar), MP_ROM_PTR(&machine_hard_uart_writechar_obj) },
    { MP_ROM_QSTR(MP_QSTR_readchar), MP_ROM_PTR(&machine_hard_uart_readchar_obj) },
    { MP_ROM_QSTR(MP_QSTR_sendbreak), MP_ROM_PTR(&machine_hard_uart_sendbreak_obj) },

    // class constants
/*
    { MP_ROM_QSTR(MP_QSTR_RTS), MP_ROM_INT(UART_HWCONTROL_RTS) },
    { MP_ROM_QSTR(MP_QSTR_CTS), MP_ROM_INT(UART_HWCONTROL_CTS) },
*/
};

STATIC MP_DEFINE_CONST_DICT(machine_hard_uart_locals_dict, machine_hard_uart_locals_dict_table);

STATIC mp_uint_t machine_hard_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) {
    machine_hard_uart_obj_t *self = self_in;
    byte *buf = buf_in;

    // check that size is a multiple of character width
    if (size & self->char_width) {
        *errcode = MP_EIO;
        return MP_STREAM_ERROR;
    }

    // convert byte size to char size
    size >>= self->char_width;

    // make sure we want at least 1 char
    if (size == 0) {
        return 0;
    }

    // read the data
    byte * orig_buf = buf;
    for (;;) {
        int data = uart_rx_char(self);

        *buf++ = data;

        if (--size == 0) {
            // return number of bytes read
            return buf - orig_buf;
        }
    }
}

STATIC mp_uint_t machine_hard_uart_write(mp_obj_t self_in, const void *buf_in, mp_uint_t size, int *errcode) {
    machine_hard_uart_obj_t *self = self_in;
    const byte *buf = buf_in;

    // check that size is a multiple of character width
    if (size & self->char_width) {
        *errcode = MP_EIO;
        return MP_STREAM_ERROR;
    }

    hal_uart_error_t err = 0;
    for (int i = 0; i < size; i++) {
        err = uart_tx_char(self, (int)((uint8_t *)buf)[i]);
    }

    if (err == HAL_UART_ERROR_NONE) {
        // return number of bytes written
        return size;
    } else {
        *errcode = mp_hal_status_to_errno_table[err];
        return MP_STREAM_ERROR;
    }
}

STATIC mp_uint_t machine_hard_uart_ioctl(mp_obj_t self_in, mp_uint_t request, uintptr_t arg, int *errcode) {
    machine_hard_uart_obj_t *self = self_in;
    (void)self;
    return MP_STREAM_ERROR;
}

STATIC const mp_stream_p_t uart_stream_p = {
    .read = machine_hard_uart_read,
    .write = machine_hard_uart_write,
    .ioctl = machine_hard_uart_ioctl,
    .is_text = false,
};

const mp_obj_type_t machine_hard_uart_type = {
    { &mp_type_type },
    .name = MP_QSTR_UART,
    .print = machine_hard_uart_print,
    .make_new = machine_hard_uart_make_new,
    .getiter = mp_identity_getiter,
    .iternext = mp_stream_unbuffered_iter,
    .protocol = &uart_stream_p,
    .locals_dict = (mp_obj_dict_t*)&machine_hard_uart_locals_dict,
};