djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
913f9ad5ad
circuitpython/ports/mimxrt/mimxrt_sdram.c

272 lines
12 KiB
C
Raw Normal View History

mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Philipp Ebensberger
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#if MICROPY_HW_SDRAM_AVAIL
#include "modmachine.h"
#include "fsl_semc.h"
#include "fsl_iomuxc.h"
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#include "fsl_clock.h"
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
// Linker symbols
extern uint8_t __sdram_start;
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#if defined(MIMXRT117x_SERIES)
// Pull Up, High drive strength
#define SDRAM_PIN_CONFIG (0x07UL)
#else
// Pull up 22K, high slew rate
#define SDRAM_PIN_CONFIG (0xE1UL)
#endif
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
void mimxrt_sdram_init(void) {
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#if !defined(MIMXRT117x_SERIES)
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
// Set Clocks
CLOCK_InitSysPfd(kCLOCK_Pfd2, 29); // '29' PLL2 PFD2 frequency = 528MHz * 18 / 29 = 327.72MHz (with 528MHz = PLL2 frequency)
CLOCK_SetMux(kCLOCK_SemcAltMux, 0); // '0' PLL2 PFD2 will be selected as alternative clock for SEMC root clock
CLOCK_SetMux(kCLOCK_SemcMux, 1); // '1' SEMC alternative clock will be used as SEMC clock root
CLOCK_SetDiv(kCLOCK_SemcDiv, 1); // '1' divide by 2 -> SEMC clock = 163.86 MHz
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#endif
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
// Set Pins
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
// Data Pins 0..15
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA00, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA00, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA01, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA01, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA02, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA02, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA03, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA03, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA04, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA04, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA05, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA05, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA06, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA06, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA07, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA07, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA08, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA08, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA09, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA09, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA10, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA10, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA11, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA11, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA12, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA12, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA13, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA13, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA14, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA14, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA15, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA15, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
// Address Pins
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR00, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR00, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR01, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR01, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR02, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR02, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR03, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR03, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR04, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR04, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR05, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR05, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR06, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR06, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR07, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR07, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR08, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR08, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR09, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR09, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR10, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR10, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR11, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR11, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_ADDR12, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_ADDR12, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DM00, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DM00, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_BA0, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_BA0, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_BA1, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_BA1, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_CAS, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_CAS, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_RAS, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_RAS, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_CLK, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_CLK, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_CKE, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_CKE, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_WE, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_WE, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DM01, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DM01, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DQS, 1UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DQS, SDRAM_PIN_CONFIG);
#if defined(MIMXRT117x_SERIES)
// Data Pins 16..31
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA16, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA16, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA17, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA17, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA18, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA18, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA19, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA19, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA20, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA20, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA21, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA21, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA22, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA22, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA23, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA23, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA24, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA24, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA25, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA25, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA26, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA26, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA27, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA27, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA28, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA28, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA29, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA29, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA30, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA30, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DATA31, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DATA31, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DM02, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DM02, SDRAM_PIN_CONFIG);
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_DM03, 0UL);
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_DM03, SDRAM_PIN_CONFIG);
#endif
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
// Chip Select Pins
#ifndef MIMXRT_IOMUXC_SEMC_CS0
#error No SEMC CS0 defined!
#endif
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_CS0, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_CS0, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
#ifdef MIMXRT_IOMUXC_SEMC_CS1
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_CS1, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_CS1, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
#endif
#ifdef MIMXRT_IOMUXC_SEMC_CS2
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_CS2, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_CS2, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
#endif
#ifdef MIMXRT_IOMUXC_SEMC_CS3
IOMUXC_SetPinMux(MIMXRT_IOMUXC_SEMC_CS3, 0UL);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
IOMUXC_SetPinConfig(MIMXRT_IOMUXC_SEMC_CS3, SDRAM_PIN_CONFIG);
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
#endif
// Configure SEMC
semc_config_t semc_cfg;
SEMC_GetDefaultConfig(&semc_cfg);
semc_cfg.dqsMode = kSEMC_Loopbackdqspad; // For more accurate timing.
SEMC_Init(SEMC, &semc_cfg);
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#if defined(MIMXRT117x_SERIES)
uint32_t clock_freq = CLOCK_GetRootClockFreq(kCLOCK_Root_Semc);
semc_sdram_config_t sdram_cfg = {
.csxPinMux = kSEMC_MUXCSX0,
.address = 0x80000000,
.memsize_kbytes = (MICROPY_HW_SDRAM_SIZE >> 10),
.portSize = kSEMC_PortSize32Bit, // two 16-bit SDRAMs make up 32-bit portsize
.burstLen = kSEMC_Sdram_BurstLen8,
.columnAddrBitNum = kSEMC_SdramColunm_9bit,
.casLatency = kSEMC_LatencyThree,
.tPrecharge2Act_Ns = 15, // tRP 15ns
.tAct2ReadWrite_Ns = 15, // tRCD 15ns
.tRefreshRecovery_Ns = 70, // Use the maximum of the (Trfc , Txsr).
.tWriteRecovery_Ns = 2, // tWR 2ns
.tCkeOff_Ns = 42, // The minimum cycle of SDRAM CLK off state. CKE is off in self refresh at a minimum period tRAS.
.tAct2Prechage_Ns = 40, // tRAS 40ns
.tSelfRefRecovery_Ns = 70,
.tRefresh2Refresh_Ns = 60,
.tAct2Act_Ns = 2, // tRC/tRDD 2ns
.tPrescalePeriod_Ns = 160 * (1000000000 / clock_freq),
.refreshPeriod_nsPerRow = 64 * 1000000 / 8192, // 64ms/8192
.refreshUrgThreshold = sdram_cfg.refreshPeriod_nsPerRow,
.refreshBurstLen = 1,
.delayChain = 2,
};
#else
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
uint32_t clock_freq = CLOCK_GetFreq(kCLOCK_SemcClk);
semc_sdram_config_t sdram_cfg = {
.csxPinMux = kSEMC_MUXCSX0,
.address = ((uint32_t)&__sdram_start),
.memsize_kbytes = (MICROPY_HW_SDRAM_SIZE >> 10), // Right shift by 10 == division by 1024
.portSize = kSEMC_PortSize16Bit,
.burstLen = kSEMC_Sdram_BurstLen1,
.columnAddrBitNum = kSEMC_SdramColunm_9bit,
.casLatency = kSEMC_LatencyThree,
.tPrecharge2Act_Ns = 18, // Trp 18ns
.tAct2ReadWrite_Ns = 18, // Trcd 18ns
.tRefreshRecovery_Ns = (60 + 67),
.tWriteRecovery_Ns = 12, // 12ns
.tCkeOff_Ns = 42, // The minimum cycle of SDRAM CLK off state. CKE is off in self refresh at a minimum period tRAS.
.tAct2Prechage_Ns = 42, // Tras 42ns
.tSelfRefRecovery_Ns = 67,
.tRefresh2Refresh_Ns = 60,
.tAct2Act_Ns = 60,
.tPrescalePeriod_Ns = 160 * (1000000000 / clock_freq),
.tIdleTimeout_Ns = 0UL,
.refreshPeriod_nsPerRow = 64 * 1000000 / 8192, // 64ms/8192
.refreshUrgThreshold = 64 * 1000000 / 8192, // 64ms/8192
.refreshBurstLen = 1
};
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#endif
mimxrt/sdram: Add SDRAM support. Adds support for SDRAM via `SEMC` peripheral. SDRAM support can be enabled in the mpconfigboard.mk file by setting `MICROPY_HW_SDRAM_AVAIL` to `1` and poviding the size of the RAM via `MICROPY_HW_FLASH_SIZE`. When SDRAM support is enabled the whole SDRAM is currently used used for MicroPython heap. Signed-off-by: Philipp Ebensberger
2021-08-20 15:41:58 -04:00
(status_t)SEMC_ConfigureSDRAM(SEMC, kSEMC_SDRAM_CS0, &sdram_cfg, clock_freq);
}
#endif
Reference in New Issue Copy Permalink