djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7ceccad4e2
circuitpython/ports/stm32/boards/NUCLEO_H743ZI/pins.csv

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

131 lines
1.3 KiB
Plaintext
Raw Normal View History

stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
A0,PA3
A1,PC0
A2,PC3
A3,PB1
A4,PC2
A5,PF10
A6,PF4
A7,PF5
A8,PF6
D0,PB7
D1,PB6
D2,PG14
D3,PE13
D4,PE14
D5,PE11
D6,PE9
D7,PG12
D8,PF3
D9,PD15
D10,PD14
D11,PB5
D12,PA6
D13,PA7
stm32/boards: Add new NUCLEO_H743ZI board configuration files. USB serial and mass storage works, and the REPL is also available via the UART through the on-board ST-LINK.
2018-02-20 17:35:05 -05:00
D14,PB9
D15,PB8
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
D16,PC6
D17,PB15
D18,PB13
D19,PB12
D20,PA15
D21,PC7
stm32/boards/NUCLEO_H743ZI: Enable SPI3 on this board.
2019-05-14 09:56:40 -04:00
D22,PB5
D23,PB3
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
D24,PA4
D25,PB4
D26,PG6
D27,PB2
D28,PD13
D29,PD12
D30,PD11
D31,PE2
D32,PA0
D33,PB0
D34,PE0
D35,PB11
D36,PB10
D37,PE15
D38,PE6
D39,PE12
D40,PE10
D41,PE7
D42,PE8
D43,PC8
D44,PC9
D45,PC10
D46,PC11
D47,PC12
D48,PD2
D49,PG2
D50,PG3
D51,PD7
D52,PD6
D53,PD5
D54,PD4
D55,PD3
D56,PE2
D57,PE4
D58,PE5
D59,PE6
D60,PE3
D61,PF8
D62,PF7
D63,PF9
D64,PG1
D65,PG0
stm32/boards/NUCLEO_H743ZI: Enable FDCAN on this board.
2019-09-15 19:57:08 -04:00
D66,PD1
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
D67,PD0
D68,PF0
D69,PF1
D70,PF2
D71,PE9
D72,PB2
stm32/boards/NUCLEO_H743ZI: Enable DAC peripheral.
2018-04-05 19:05:22 -04:00
DAC1,PA4
DAC2,PA5
stm32/boards: Add new NUCLEO_H743ZI board configuration files. USB serial and mass storage works, and the REPL is also available via the UART through the on-board ST-LINK.
2018-02-20 17:35:05 -05:00
LED1,PB0
LED2,PB7
LED3,PB14
SW,PC13
stm32/boards/NUCLEO_H743ZI: Enable hardware I2C support.
2018-03-19 09:10:57 -04:00
I2C1_SDA,PB9
I2C1_SCL,PB8
I2C2_SDA,PF0
I2C2_SCL,PF1
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
I2C4_SCL,PF14
I2C4_SDA,PF15
stm32/boards/NUCLEO_H743ZI: Enable SD card support.
2018-03-24 15:24:06 -04:00
SD_D0,PC8
SD_D1,PC9
SD_D2,PC10
SD_D3,PC11
SD_CMD,PD2
SD_CK,PC12
SD_SW,PG2
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
OTG_FS_POWER,PG6
OTG_FS_OVER_CURRENT,PG7
USB_VBUS,PA9
USB_ID,PA10
stm32/boards: Add new NUCLEO_H743ZI board configuration files. USB serial and mass storage works, and the REPL is also available via the UART through the on-board ST-LINK.
2018-02-20 17:35:05 -05:00
USB_DM,PA11
USB_DP,PA12
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
UART2_TX,PD5
UART2_RX,PD6
UART2_RTS,PD4
UART2_CTS,PD3
stm32/boards: Add new NUCLEO_H743ZI board configuration files. USB serial and mass storage works, and the REPL is also available via the UART through the on-board ST-LINK.
2018-02-20 17:35:05 -05:00
UART3_TX,PD8
UART3_RX,PD9
stm32/boards/NUCLEO_H743ZI: Add extra pins and peripheral definitions. - Corrected pin assignments and checked with CubeMX. - Added additional I2C and UARTs. - Added Ethernet interface definitions with lwIP and SSL support (but Ethernet is currently unsupported on H7 MCUs so not fully enabled).
2019-12-10 15:52:30 -05:00
UART5_TX,PB6
UART5_RX,PB12
UART6_TX,PC6
UART6_RX,PC7
UART7_TX,PF7
UART7_RX,PF6
UART8_TX,PE1
UART8_RX,PE0
ETH_MDC,PC1
ETH_MDIO,PA2
ETH_RMII_REF_CLK,PA1
ETH_RMII_CRS_DV,PA7
ETH_RMII_RXD0,PC4
ETH_RMII_RXD1,PC5
ETH_RMII_TX_EN,PG11
ETH_RMII_TXD0,PG13
ETH_RMII_TXD1,PB13
Reference in New Issue Copy Permalink