djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7bc71f5446
circuitpython/ports/stm32/boards/STM32F769DISC/mpconfigboard.mk

19 lines
560 B
Makefile
Raw Normal View History

stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 00:28:01 -05:00
# By default this board is configured to use mboot which must be deployed first
USE_MBOOT ?= 1
stmhal: Add STM32F769DISC board files. With minor changes to adc.c and storage.c to support the F769.
2016-12-12 00:36:35 -05:00
MCU_SERIES = f7
CMSIS_MCU = STM32F769xx
stmhal/Makefile: Rename FLOAT_IMPL to MICROPY_FLOAT_IMPL to match C name The name used in py/mpconfig.h is MICROPY_FLOAT_IMPL so rename this Makefile variable to mirror that.
2017-06-28 01:42:40 -04:00
MICROPY_FLOAT_IMPL = double
stmhal/boards/STM32F769DISC: Get SD card working by using SDMMC2.
2017-03-30 02:58:45 -04:00
AF_FILE = boards/stm32f767_af.csv
stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 00:28:01 -05:00
ifeq ($(USE_MBOOT),1)
# When using Mboot all the text goes together after the filesystem
LD_FILES = boards/stm32f769.ld boards/common_blifs.ld
TEXT0_ADDR = 0x08020000
else
# When not using Mboot the ISR text goes first, then the rest after the filesystem
stm32/boards: Allow boards to have finer control over the linker script. This patch allows a particular board to independently specify the linker scripts for 1) the MCU memory layout; 2) how the different firmware sections are arranged in memory. Right now all boards follow the same layout with two separate firmware section, one for the ISR and one for the text and data. This leaves room for storage (filesystem data) to live between the firmware sections. The idea with this patch is to accommodate boards that don't have internal flash storage and only need to have one continuous firmware section. Thus the common.ld script is renamed to common_ifs.ld to make explicit that it is used for cases where the board has internal flash storage.
2018-03-27 06:17:48 -04:00
LD_FILES = boards/stm32f769.ld boards/common_ifs.ld
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections. This patch forces a board to explicitly define TEXT1_ADDR in order to split the firmware into two separate pieces. Otherwise the default is now to produce only a single continuous firmware image with all ISR, text and data together.
2018-03-27 06:24:15 -04:00
TEXT0_ADDR = 0x08000000
TEXT1_ADDR = 0x08020000
stm32/boards/STM32F769DISC: Configure for use with mboot by default. This is a good board to demonstrate the use of Mboot because it only has a USB HS port exposed so the native ST DFU mode cannot be used. With Mboot this port can be used.
2019-02-07 00:28:01 -05:00
endif
Reference in New Issue Copy Permalink